Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance

Organic–inorganic perovskites have made tremendous progress in recent years due to exceptional material properties such as high panchromatic absorption, charge carrier diffusion lengths, and a sharp optical band edge. The combination of high‐quality semiconductor performance with low‐cost deposition techniques seems to be a match made in heaven, creating great excitement far beyond academic ivory towers. This is particularly true for perovskite solar cells (PSCs) that have shown unprecedented gains in efficiency and stability over a time span of just five years. Now there are serious efforts for commercialization with the hope that PSCs can make a major impact in generating inexpensive, sustainable solar electricity. In this Review, we will focus on perovskite material properties as well as on devices from the atomic to the thin film level to highlight the remaining challenges and to anticipate the future developments of PSCs.     

Graphene‐Based Inverted Planar Perovskite Solar Cells: Advancements,Fundamental Challenges,and Prospects

Metal halide based perovskite solar cells (PSCs) are considered among the most promising photovoltaic technologies, and already present certified efficiencies that surpass 22 %. The high performance and low fabrication cost make this technology competitive with that of state‐of‐the‐art thin‐film photovoltaics. However, PSCs present some striking disadvantages that hinder their commercialization, including short operational lifetimes, high toxicity, and hysteresis effects, which lower both the performance and long‐term stability of the devices. Herein, work conducted within the last two years is summarized with regard to addressing the challenges of low‐temperature‐processed planar inverted PSCs composed of graphene‐based materials. In addition, critical challenges and the prospects of this field are discussed and some prospects for future research directions are proposed.     

An eco‐friendly water‐soluble fluorene‐based polyelectrolyte as interfacial layer for efficient inverted polymer solar cells

A conjugated polyelectrolyte poly(9,9‐bis(3′‐[(N,N‐dimethyl)‐N‐ethylammonium]‐propyl)‐2,7‐fluorene dibromide) (PFBr) with the feature of environmental friendliness and cheapness was successfully used in polymer solar cells (PSCs) as the cathode interfacial layer (CIL). And we successfully demonstrate that the PFBr can build interfacial dipoles at the CIL/cathode interfaces, leading to reduce cathode work functions and improve open‐circuit voltages, which decrease interfacial energy loss at the cathode. It not only improves the electron transfer efficiency but also inhibits the charge carrier recombination at the contact interface. Impedance spectra revealed that the optimal device with the smallest charge transport time constant of 2.83 microseconds was achieved under the concentration of 2 mg mL⁻¹ of PFBr, which suggests efficient electron transport on the interface between the organic active layer and the indium tin oxide cathode. Moreover, as a consequence, the power conversion efficiency of the PSCs increases to 3.83% (with PFBr as CIL) from 1.89% (without any CIL), based on the poly(3‐hexylthiophene) and [6,6]‐phenyl C₆₁‐butyric acid methyl ester bulk heterojunction active layer. Therefore, our observation can demonstrate PFBr is a prospective candidate as CIL for constructing low‐cost, large‐area, and flexible PSCs.     

n‐Type Conjugated Polymer Based on Dicyanodistyrylbenzene and Naphthalene Diimide Units for All‐Polymer Solar Cells

All polymer solar cells (all‐PSCs), possessing superior mechanical strength and flexibility, offer the commercialization opportunity of the PSCs for flexible and portable devices. In this work, we designed and synthesized two copolymer acceptors based on dicyanodistyrylbenzene (DCB) and naphthalene diimide (NDI) units. The corresponding copolymer acceptors are denoted as PDCB‐NDI812 and PDCB‐NDI1014. The medium band gap copolymer PBDB‐T was selected as donor material for investigation of the photovoltaic performance. Two all‐PSCs devices showed power conversion efficiencies (PCE) of 4.26% and 3.43% for PDCB‐NDI812 and PDCB‐NDI1014, respectively. The improved PCE was ascribed to the higher short‐circuit current (J_SC), greater charge carrier mobility and higher exciton dissociation probability of the PBDB‐T:PDCB‐NDI812 blend film. These results suggest that DCB unit and NDI unit based copolymer acceptors are promising candidates for high performance all‐PSCs.     

SnO2表面卤化提高钙钛矿太阳能电池光伏性能

钙钛矿太阳能电池(PSCs)成为近几年来迅速发展的新型太阳能电池,其中将SnO₂纳米粒子层用作电子传输层(ETL)的钙钛矿太阳能电池器件得到了广泛的关注。SnO₂有着更低的制备温度,使其具备应用于柔性器件的潜力,但与钙钛矿层能级不匹配等问题限制着其发展。而在界面处加入钝化层,尤其是表面卤化的方法或可解决这一问题。本文综合研究了SnO₂表面卤化对钙钛矿太阳能电池光伏性能的影响,选用四丁基氯化铵(TBAC)、四丁基溴化铵(TBAB)和四丁基碘化铵(TBAI)三种钝化材料对SnO₂表面进行钝化处理,并对钝化材料溶液进行了浓度梯度研究。通过材料形貌、结构和光学性能表征以及电池器件性能测试分析等方法,证明了SnO₂表面卤化可提高钙钛矿层的质量和PSCs光伏性能,并从器件内部电荷传输动力学等角度解释了器件性能改善的原因。为进一步说明其性能改善的机理,采用基于密度泛函理论(DFT)的第一性原理计算方法对材料表面性质进行了深入研究,从能量、结构、电荷密度、态密度、功函数等角度解释了表面卤化提高SnO₂/钙钛矿界面处电子传输特性的原因。实验和理论计算均表明TBAC对于SnO₂具有较好的钝化效果,并随着溶液浓度的提升钝化作用越明显。SnO₂表面卤化作用的深入研究不仅对提高电池器件性能具有实际意义,还能够帮助理解太阳能电池界面现象,为界面改性提供新的研究思路。     

Stipulating Low Production Cost Solar Cells All Set to Retail…!

Today's solar cells are exceptionally in demand whilst excess exploitation of natural fossil fuels. In this context, the first and second generation solar cells commercially available in market for more than decades however limitations in production cost and large–scale applications insist to generate inexpensive materials for fabrication. Thereby, organic materials based solar cells explored and emerging as third generation solar cells which possess flexibility, low cost and large‐scale applications. For example, organic photovoltaics, dye sensitized solar cells and perovskite (organic‐inorganic) solar cells (PSCs) are considered third generation solar cells wherein PSCs reached the record power conversion efficiency (PCE ～23 %) and durability assists great advantages for commercialization in near future. Moreover, we reported various global renowned companies involved producing the modules and materials for three generation solar cells, hence, majority of companies considered commercialization of perovskite based solar cells assist low cost photovoltaics to meet the current energy necessities and environmental safety.     

Suppressing Interfacial Charge Recombination in Electron-Transport-Layer-Free Perovskite Solar Cells to Give an Efficiency Exceeding 21 %

The performances of electron-transport-layer (ETL)-free perovskite solar cells (PSCs) are still inferior to ETL-containing devices. This is mainly due to severe interfacial charge recombination occurring at the transparent conducting oxide (TCO)/perovskite interface, where the photo-injected electrons in the TCO can travel back to recombine with holes in the perovskite layer. Herein, we demonstrate for the first time that a non-annealed, insulating, amorphous metal oxyhydroxide, atomic-scale thin interlayer (ca. 3 nm) between the TCO and perovskite facilitates electron tunneling and suppresses the interfacial charge recombination. This largely reduced the interfacial charge recombination loss and achieved a record efficiency of 21.1 % for n-i-p structured ETL-free PSCs, outperforming their ETL-containing metal oxide counterparts (18.7 %), as well as narrowing the efficiency gap with high-efficiency PSCs employing highly crystalline TiO₂ ETLs.     

Development of electron and hole selective contact materials for perovskite solar cells

Nowadays, both n-i-p and p-i-n perovskite solar cells (PSCs) device structures are reported to give high performance with photo conversion efficiencies (PCEs) above 20%. The efficiency of the PSCs is fundementally determined by the charge selective contact materials. Hence, by introducing proper contact materials with good charge selectivity, one could potentially reduce interfacial charge recombination as well as increase device performance. In the past few years, copious charge selective contact materials have been proposed. Significant improvements in the corresponding devices were observed and the reported PCEs were close to that of classic Spiro-OMeTAD. This mini-review summarizes the state-of-the-art progress of typical electron/hole selective contact materials for efficient perovskite solar cells and an outlook to their development is made.     

Facile Synthesis of a Furan–Arylamine Hole‐Transporting Material for High‐Efficiency,Mesoscopic Perovskite Solar Cells

A novel hole‐transporting molecule (F101) based on a furan core has been synthesized by means of a short, high‐yielding route. When used as the hole‐transporting material (HTM) in mesoporous methylammonium lead halide perovskite solar cells (PSCs) it produced better device performance than the current state‐of‐the‐art HTM 2,2′,7,7′‐tetrakis‐(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene (spiro‐OMeTAD). The F101‐HTM‐based device exhibited both slightly higher J_sc (19.63 vs. 18.41 mA cm^?2) and V_oc (1.1 vs. 1.05 V) resulting in a marginally higher power conversion efficiency (PCE) (13.1 vs. 13 %). The steady‐state and time‐resolved photoluminescence show that F101 has significant charge extraction ability. The simple molecular structure, short synthesis route with high yield and better performance in devices makes F101 an excellent candidate for replacing the expensive spiro‐OMeTAD as HTM in PSCs.     

Aggregation-induced Emission Materials for High-efficiency Perovskite Solar Cells

The perovskite solar cells (PSCs) with high efficiency and stability are in great demand for commercial applications. Although the remarkable photovoltaic feature of perovskite layer plays a great role in improving the PCE of PSCs, the inevitable defects and poor stability of perovskite, etc. are the bottleneck and restrict the commercialization of PSCs. Herein, a review provides a strategy of applying aggregation-induced emission (AIE) molecules, containing passivation functional groups and distinct AIE character, which serves as the alternative materials for fabricating high-efficiency and high-stability PSCs. The methods of introducing AIE molecules to PSCs are also summarized, including additive engineering, interfacial engineering, hole transport materials and so on. In addition, the functions of AIE molecule are discussed, such as defects passivation, morphology modulation, well-matched energy level, enhanced stability, hole transport ability, carrier recombination suppression. Finally, the detailed functions of AIE molecules are offered and further research trend for high performance PSCs based on AIE materials is proposed.     

Novel Copolymers Based Tetrafluorobenzene and Difluorobenzothiadiazole for Organic Solar Cells with Prominent Open Circuit Voltage and Stability

Two novel copolymers based on benzothiadiazole (BT) or difluorobenzothiadizole (ffBT) with 2,2′‐(perfluoro‐1,4‐phenylene)dithiophene (2TPF4), namely PBT‐2TPF4 and PffBT‐2TPF4, are synthesized for applications in polymer solar cells (PSCs). A noticeably high open‐circuit voltage (V _oc) of 1.017 and 0.87 V are achieved for PffBT‐2TPF4 and PBT‐2TPF4‐based devices, respectively. Although only a moderate efficiency (5.7%) of PBT‐2TPF4‐based devices is obtained, it is first demonstrated that 2TPF4 is a promising acceptor block for construction of the donor copolymers which possess high V _oc, prominent crystallinity, and long‐term stability, simultaneously. Besides, two thienyl flanking the tetrafluorophenylene can decrease torsion angle between conjugated units, resulting in a high coplanar structure of copolymers to enhance their charge carrier mobility. The findings may open a promising and practical way to accelerate the commercialization of PSCs by developing a series of new donor copolymers for efficient and long‐term stable thickness bulk heterojunction PSCs.

     

Interfacial behavior of sulforhodamine 101 at the polarized water/1,2-dichloroethane interface studied by spectroelectrochemical techniques

The transfer mechanism of an amphoteric rhodamine, sulforhodamine 101 (SR101), across the polarized water/1,2-dichloroethane (DCE) interface was investigated using cyclic voltammetry, differential voltfluorometry and potential-modulated fluorescence (PMF) spectroscopy. The voltammetric response for the ion transfer of SR101 monoanion from water to DCE was observed as the diffusion-controlled transfer process. An unusual voltammetric response was found at 0.15 V more negative than the formal transfer potential of SR101⁻ in the cyclic voltammogram and voltfluorogram. The frequency dependence of the PMF responses confirmed the presence of the adsorption processes at negative potentials. In addition, a further transient adsorption step was uncovered at The interfacial mechanism of SR101 is discussed by comparing the results obtained from each technique.     

A mini review: Constructing perovskite p-n homojunction solar cells

Organic metal halide perovskite materials have excellent photoelectric properties, and the power conversion efficiency(PCE) of the perovskite solar cells(PSCs) has increased from 3.8% to more than 25%. In the development of PSCs, innovative architectures were being proposed constantly. However, the use of the electron transport layer(ETL) and hole transport layer(HTL) increases manufacturing costs and process complexity. Perovskite material has ambipolar charge transport characteristics, so it c...     

低成本富勒烯衍生物电子传输层在钙钛矿太阳能电池的应用

Organic-inorganic hybrid perovskite solar cells (PSCs) have attracted significant attention owing to their high absorption coefficient and ambipolar charge transport properties. With only several years of development, the power conversion efficiency (PCE) has increased from 3.8% to 22.7%. In general, PSCs have two types of structural architecture: mesoporous and planar. The latter possesses higher potential for commercialization due to its simpler structure and fabrication process, especially the inverted planar structure, which possesses negligible hysteresis. In an inverted PSC, the electron transport materials (ETM) are deposited on a perovskite film. Only a few ETMs can be used for inverted PSCs as the perovskite film is easily damaged by the solvent used to dissolve the ETM. Furthermore, the energy levels of the ETM should be well aligned with that of the perovskites. Normally it is difficult to use inorganic ETMs as they require high temperatures for the annealing process to improve the electron conductivity; the perovskite film cannot sustain these high temperatures. To date, the fullerene derivative, [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM), is the most commonly used organic ETM for high efficiency inverted planar PSCs. However, the high manufacturing cost due to its complex synthesis retards the industrialization of the PSCs. Here, we introduce a fullerene pyrrolidine derivative, N-methyl-2-pentyl-[60]fullerene pyrrolidine (NMPFP), synthesized via the Prato reaction of C₆₀ directly with cheap hexanal and sarcosine. Then the NMPFP electron transport layer (ETL) was prepared by a simple solution process. The properties of the resulting NMPFP ETLs were characterized using UV-Vis absorption spectroscopy, cyclic voltammetry measurements, atomic force microscopy, and conductivity test. From the results of the UV-Vis absorption spectroscopy and cyclic voltammetry measurements, the LUMO level of NMPFP ETL was calculated to be 0.2 eV higher than that of the PCBM ETL. This contributes to a higher open-circuit photovoltage. In addition, the NMPFP film presented higher conductivity than the PCBM film. Thus, the photo-generated charge carriers in the perovskite films should be transported more efficiently to the NMPFP electron transport layer (ETL) than to the PCBM ETL. This was confirmed by the results of the steady-state photoluminescence spectroscopy. Finally, the NMPFP as an alternative low-cost ETL was employed in an inverted planar PSC to evaluate the device performance. The device made with the NMPFP ETL yielded an efficiency of 13.83% with negligible hysteresis, which is comparable to the PCBM counterpart devices. Moreover, since stability is another important parameter retarding the commercialization of PSCs, the stability of the PCBM and NMPFP base PSCs were investigated and compared. It was found that the NMPFP devices possessed significantly improved stability due to the higher hydrophobicity of the NMPFP. In conclusion, this research demonstrates that NMPFP is a promising ETL to replace PCBM for the industrialization of cheap, efficient and stable inverted planar PSCs.     

Improved performance and air stability of perovskite solar cells based on low-cost organic hole-transporting material X60 by incorporating its dicationic salt

The development of an efficient, stable, and low-cost hole-transporting material (HTM) is of great significance for perovskite solar cells (PSCs) from future commercialization point of view. Herein, we specifically synthesize a dicationic salt of X60 termed X60(TFSI)2, and adopt it as an effective and stable "doping" agent to replace the previously used lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) for the low-cost organic HTM X60 in PSCs. The incorporation of this dicationic salt significantly increases the hole conductivity of X60 by two orders of magnitude from 10-6 to 10-4 S cm-1. The dramatic enhancement of the conductivity leads to an impressive power conversion efficiency (PCE) of 19.0% measured at 1 sun illumination (100 mW cm-2, AM 1.5 G), which is comparable to that of the device doped with LiTFSI (19.3%) under an identical condition. More strikingly, by replacing LiTFSI, the PSC devices incorporating X60(TFSI)2 also show an excellent long-term durability under ambient atmosphere for 30 days, mainly due to the hydrophobic nature of the X60(TFSI)2 doped HTM layer,which can effectively prevent the moisture destroying the perovskite layer. The present work paves the way for the development of highly efficient, stable, and low-cost HTM for potential commercialization of PSCs.     

When Aggregation-Induced Emission Meets Perovskites: Efficient Defect-Passivation and Charge-Transfer for Ambient Fabrication of Perovskite Solar Cells

The intrinsic defects in perovskite film can serve as non-radiative recombination center to limit the performance and stability of metal halide perovskite solar cells (PSCs). The additive engineering in perovskite film is always applied to produce high-efficiency PSCs in recent years. Here, a typical donor-acceptor (D−A) structured aggregation-induced emission (AIE) molecule tetraphenylethene-2-dicyano-methylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TPE-TCF) was introduced into perovskite film. The D−A structure of TPE-TCF molecule provided additional charge transfer channels, contributing to transporting electron of TPE-TCF-based device. The cyano (C≡N) of TPE-TCF can interact with the uncoordinated Pb to from a relatively stable intermediate, PbI₂⋅TPE-TCF, resulting in the slower crystal growth, reduced the defects at the grain boundaries and suppressed carrier recombination. As a consequence, the power conversion efficiency (PCE) of TPE-TCF-modified PSCs achieved a remarkably enhanced from 15.63 to 19.66 % with negligible hysteresis, which was prominent in methylammonium lead iodide-based devices fabricated under ambient condition. Furthermore, the PSCs modified by AIE molecule possessed an outstanding stability and maintain about 86 % of the initial PCE after 300 h storage in air at 25–35 °C with a high relative humidity (RH) of ≈85 %. This work suggests that incorporating AIE molecule into perovskite is a promising strategy for facilitating high-performance PSCs commercialization in ambient environment without glovebox.     

反式钙钛矿电池超薄空穴传输层研究进展

空穴传输层(HTLs)厚度对反式钙钛矿太阳能电池(PSCs)性能具有重大影响,因其显著影响太阳光透过和HTLs的空穴传输性能。几个纳米至十几个纳米厚度的超薄HTLs在减少伴生吸收、电荷传输损失和材料消耗等方面具有明显优势。目前,有许多成熟的制备超薄无机HTLs的方法,并在反式和叠层PSCs中得到广泛研究与应用。最近,一些关于有机超薄HTLs的新型制备方法也展现出良好的性能并逐渐引起相关领域研究者关注。在此,本文主要总结反式PSCs中超薄HTLs的研究进展与应用,关注其未来发展的挑战和方向,为该领域进一步的研究提供参考。     

Repair Strategies for Perovskite Solar Cells

In recent years, organic-inorganic hybrid halide perovskite solar cells(PSCs) have obtained rapid development due to their excellent optoelectronic properties and low fabrication cost. However, owing to the environmental sensitivity of perovskite materials, the instability of PSCs is the key issue hindering its commercialization. Developing feasible strategy to repair the degraded PSCs stands for effective and unique means to prolong the operational lifetime of PSCs. Herein, we summarize various methods to repair the degraded PSCs under the influence of different environmental conditions. Along with the repairing process, the optoelectronic properties of perovskite film as well as the corresponding PSCs are discussed. Some suggestions on how to further improve the intrinsic stability of perovskite and repairing effect of PSCs are also provided.     

Impact of environmentally friendly processing solvents on the properties of blade‐coated polymer solar cells

High‐performance polymer solar cells (PSCs) are typically fabricated by spin coating in inert atmosphere from toxic halogenated solvents such as 1,2‐dichlorobenzene (o‐DCB) and chlorobenzene. This fabrication process is potentially hazardous for both the humans and the environment and dramatically impacts the possibility for the organic photovoltaic technology to be adopted at large scale. In this work, efficient PSCs blade coated in air using nonhalogenated 1,2,4‐trimethylbenzene (TMB) as processing solvent are demonstrated. The active layer, based on a previously synthesized benchmark polymer PFQ2T‐benzodithiophene blended with [6,6]‐phenyl‐C61‐butyric acid methyl ester (PC₆₁BM), showed an enhanced solid‐state aggregation induced by the use of TMB. Compared to o‐DCB‐processed devices, the solar cells fabricated from TMB resulted 10% more efficient with a power conversion efficiency of 4.20%. Interestingly, the improved photovoltaic performance resulted from the combination of synergic effects promoted by a more favorable film morphology, such as high exciton dissociation efficiency and lower bimolecular recombinations resulting in higher charge collection efficiency at the electrodes. The positive effect of TMB, compared to that of commonly employed halogenated solvents, confirms the great potential of this approach for the development of efficient PSCs for practical applications with reduced environmental impact. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 487–494     

High‐Efficiency Perovskite Solar Cells Enabled by Anatase TiO2 Nanopyramid Arrays with an Oriented Electric Field

One‐dimensional (1D) nanostructured oxides are proposed as excellent electron transport materials (ETMs) for perovskite solar cells (PSCs); however, experimental evidence is lacking. A facile hydrothermal approach was employed to grow highly oriented anatase TiO₂ nanopyramid arrays and demonstrate their application in PSCs. The oriented TiO₂ nanopyramid arrays afford sufficient contact area for electron extraction and increase light transmission. Moreover, the nanopyramid array/perovskite system exhibits an oriented electric field that can increase charge separation and accelerate charge transport, thereby suppressing charge recombination. The anatase TiO₂ nanopyramid array‐based PSCs deliver a champion power conversion efficiency of approximately 22.5 %, which is the highest power conversion efficiency reported to date for PSCs consisting of 1D ETMs. This work demonstrates that the rational design of 1D ETMs can achieve PSCs that perform as well as typical mesoscopic and planar PSCs.