5-[2''-氟-4''-溴-苯甲亚胺]-8-羟基喹啉铝的量子化学研究

应用密度泛函PBE0方法优化5-[2′-氟-4′-溴-苯甲亚胺]-8-羟基喹啉铝(AlA3)及5-[2′-氟-4′-溴-苯甲亚胺]-8-羟基喹啉(HA)的几何构型,用TDDFT法计算其电子光谱,对电荷转移及金属原子与配体的结合能进行了讨论.计算结果表明:(1)AlA3配合物较稳定,但结合能略低于8-羟基喹啉铝(AlQ3).与AlQ3相比,AlA3的轨道作用较强,静电作用较弱,两者之和相近,但AlA3排斥能较大.(2)计算AlA3的两个电子吸收峰与实验结果相符.AlA3中的电荷由羟基喹啉基团通过Al原子在不同配体间转移呈现出最大吸收峰,属于AlQ3类衍生物的特征吸收峰.因为体系的共轭程度增大使LUMO轨道能降低,电子跃迁需要的能量减少,故吸收峰比AlQ3红移;(3)290 nm吸收峰是电荷由C N基团向羟基喹啉基团转移产生的.在喹啉环接上5-[2′-氟-4′-溴-苯甲亚胺]基团可望制备出波长更长的发光材料,且增加了一个较强的吸收峰.     

8-羟基喹啉衍生物及其锌配合物的合成

<正>自从1987年美国Kadak公司C.W.Tang及其合作者[1]首次用8-羟基喹啉铝(Alq3)作为发光层,得到了在较低直流电压(约10V)驱动下高亮度(1000cd/m2)的有机电致发光材料以来,以8-羟基喹啉为配体的有机金属电致发光材料的研究就一直成为人们重点关注的内容[2-5];近年来,人们不断对8-羟基喹啉配体进行化学修饰[6-12],在喹啉环结构上引入不同基团,改变分子轨道中HOMO和LUMO能级差,使配合物发光峰改变,成功合成出各种发不同荧光的有机电致发光材料。     

含氯不对称配体8-羟基喹啉铝配合物电子和光谱性质的TDDFT研究

以含时密度泛函理论(TDDFT) B3LYP方法通过电子结构计算研究了含氯不对称配体8-羟基喹啉铝配合物AlQ(ClQ)₂的吸收和发射光谱性质. 计算表明, 第一激发态与基态结构变化主要集中在单一含氯配体中, 与mer-AlQ₃相比, 前线占有轨道离域程度变大而未占据轨道则定域化程度提高. 最大吸收主要来自配体内电荷转移跃迁, 电荷从苯酚环和氯向含氮的吡啶环跃迁. 电子陷入态计算表明, 抽取电子能量比AlQ₃相应值略大, 与实验结果一致.     

8-羟基喹啉衍生物及其金属配合物的合成与光致发光特性

设计合成了三种新型的8-羟基喹啉衍生物配体: 5-[(4-E-苯乙烯基)-苯甲亚胺基]-8-羟基喹啉(1), 5-[(4-溴-2-氟)-苯甲亚胺基]-8-羟基喹啉(2)和N-乙基-3-[2-(8-羟基喹啉基)-乙烯基]咔唑(3), 以及它们相应的金属配合物, 产物经质谱(MS)、元素分析(EA)、红外光谱(IR)、紫外光谱(UV)、核磁共振氢谱(¹H NMR)进行表征, 并测定了它们的荧光性质. 结果与8-羟基喹啉比较表明, 5位和2位取代8-羟基喹啉衍生物的荧光发生了明显的红移. 同时测定了配合物(3)₂Zn的荧光寿命, 结果表明, N-乙基-3-[2-(8-羟基喹啉基)-乙烯基]咔唑锌配合物表现出较长的荧光寿命.     

N-[4-(N′-取代酰胺基)苯基]马来酰亚胺的合成与表征

N-取代马来酰亚胺(RMI)是一类重要的新型树脂改性单体,由于其具有刚性五元环的结构,能显著提高聚合物的玻璃化温度和热分解温度,改善材料的工艺性和力学性能[1-9]。但文献对于在N-取代基团中引入杂环结构的单体合成报道很少。本文报道了由顺丁烯二酸酐、8-氨基喹啉、对甲苯胺为主要原料合成N-[4-(N′-8-喹林基)苯甲酰胺基]马来酰亚胺(QPM)和N-[4-(N′-4-甲基苯基)苯甲酰胺基]马来酰亚胺(TPM)的方法,并对产物进行了元素分析和1H-NMR、FT-IR表征。同时,由于8-氨基喹啉具有与8-羟基喹啉类似的结构,能表现出较好的光学性能[10,11],以N…     

具有Frétchet树枝结构的新型酞菁锌(Ⅱ)配合物:四-{3,5-二-[3,5-二-(4-羧基苯甲氧基)苯甲氧基]-苯甲氧基}酞菁锌(Ⅱ)的合成与表征

报道了一种新型Frétchet树枝配体取代酞菁锌(II)配合物:四-{3,5-二-[3,5-二-(4-羧基苯甲氧基)苯甲氧基]-苯甲氧基}酞菁锌(II)的合成与表征.首先将对氰基苄溴与3,5-二羟基苯甲醇通过Frétchet反应合成3,5-[二-(4-氰基苯甲氧基)]苯甲醇(1),1与四溴化碳和三苯基膦在四氢呋喃中反应合成3,5-二-(4-氰基苯甲氧基)苄溴(2),2与3,5-二羟基苯甲醇反应合成3,5-二-[3,5-二-(4-氰基苯甲氧基)苯甲氧基]苯甲醇(3),接着,3与4-硝基邻苯二甲腈合成"前驱物"四-{3,5-[二-(4-氰基苯甲氧基)]}苯甲氧基邻苯二甲腈(4),然后以1,8-二氮杂双环[5.4.0]十一碳-7-烯(DBU)为催化剂,醋酸锌为模板剂,4通过缩聚反应合成氰基端基的Frétchet树枝配体取代酞菁锌四-{3,5-二-[3,5-二-(4-氰基苯甲氧基)苯甲氧基]-苯甲氧基}锌酞菁配合物5,最后,5的氰基端基在NaOH溶液中水解为相应的以羧基端基Frétchet树枝配体取代酞菁锌:四-{3,5-二-[3,5-二-(4-羧基苯甲氧基)苯甲氧基]-苯甲氧基}酞菁锌(II)(6).采用元素分析,IR,1H NMR,ESI-MS和MALDI-TOF-MS表征所有化合物的结构,通过UV/Vis,稳态和瞬态荧光光谱法研究了5和6的光物理性质.5和6是一类性能较好的树枝状酞菁光敏剂.     

含8-羟基喹啉铝配合物的高分子聚合物的合成与表征

通过甲基丙烯酸甲酯(MMA)和含有8-羟基喹啉的单体共聚合成模板聚合物,再与二配体的8-羟基喹啉铝配合物(AlQ2)配位,实现了8-羟基喹啉铝配合物的高分子化,获得了一种高分子量金属配合物发光聚合物,并利用元素分析,FTIR,UV,PL光谱,GPC等方法对其结构和性能作了表征．     

4,4'-二[N-(芘-1-基亚烃基)胺芳基]-2,2'-双噻唑的合成

以硝基苯乙酮为原料,经α-溴代、缩合和还原3步反应制得4,4'-二氨芳基-2,2'-双噻唑(3a,3c,3e);3a,3c和3e分别与酰基芘经缩合反应合成了6个新型的希夫碱——4,4'-二[N-(芘-1-基亚烃基)胺芳基]-2,2'-双噻唑(5a~5f),其结构经1H NMR,FT-IR和元素分析表征。5a~5f的熔点均300℃。     

含三氟苯基8-羟基喹啉锌配合物的合成及紫外、荧光性能对比研究

设计合成了两种含三氟苯基的新型8-羟基喹啉衍生物配体:(E)-2-[2-(2,4,6-三氟苯基)乙烯基]-8-羟基喹啉(B)、(E)-5-[2-(2,4,6-三氟苯基)亚胺基]-8-羟基喹啉(C)及其相应的锌配合物D与E,产物经NMR,IR,MS,元素分析等进行结构表征。通过核磁、紫外滴定跟踪了金属锌与配体的配位过程,并测定了两者溶液状态下的荧光性质:化合物D,E在甲醇溶液中的荧光发射峰位置分别在599 nm和572 nm处;相比于8-羟基喹啉,2位和5位取代8-羟基喹啉衍生物的荧光发生了明显红移。锌配合物固体荧光寿命的测定结果表明,配合物D表现出较长的荧光寿命。     

R 和 s-1-(3'-溴-4'-甲氧基)苄基-2-甲基-6-甲氧基-7-羟基-1, 2,3,4-四氢异喹啉的合成

本文报道了R和S-1-(3'-溴-4'-甲氧基)苄基-2-甲基-6-甲氧基-7-羟基-1,2,3,4-四氢异喹啉的合成。     

Synthesis and photoluminescence properties of 8-hydroxyquinoline derivatives and their metallic complexes

Three new 8-hydroxyquinoline derivatives, i.e. 5-[(4-styryl-benzylidene)-amino]-quinolin-8-ol (1), 5-[(4-bromo-2-fluoro-benzylidene)-amino]-quinoline-8-ol (2) and 2-[2-(9-ethyl-9H-carbazol-2yl)-vinyl]-quinolin-8-ol (3), and their metallic complexes were synthesized and identified by ultraviolet-visible (UV-Vis), ¹H nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectrometer (FTIR), mass spectrometry (MS) spectra and elemental analyses. Their fluorescence properties were studied by photoluminescence, which indicated that the luminescence wavelength of 5-and 2-substitued-8-hydroxyquinoline derivatives shifted to red in comparison with that of 8-hydroxyquinoline. Meanwhile, the fluorescence lifetime of 2-[2-(9-ethyl-9H-carbazol-2yl)-vinyl]-quinolin-8-ol and its zinc complex showed long lifetime in benzene solution. __________ Translated from Chinese Journal of Organic Chemistry, 2007, 27(3): 402–408 [译自: 有机化学]     

Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis

Tris(8-hydroxyquinoline)aluminum(III), AlQ3, is used in organic light-emitting diodes (OLEDs) as an electron-transport material and emitting layer. The reaction of AlQ3 with trace H2O has been implicated as a major failure pathway for AlQ3-based OLEDs. Hybrid density functional calculations have been carried out to characterize the hydrolysis of AlQ3. The thermochemical and atomistic details for this important reaction are reported for both the neutral and oxidized AlQ3/AlQ3+ systems. In support of experimental conclusions, the neutral hydrolysis reaction pathway is found to be a thermally activated process, having a classical barrier height of 24.2 kcal mol(-1). First-principles infrared and electronic absorption spectra are compared to further characterize AlQ3 and the hydrolysis pathway product, AlQ2OH. The activation energy for the cationic AlQ3 hydrolysis pathway is found to be 8.5 kcal mol(-1) lower than for the neutral reaction, which is significant since it suggests a role for charge imbalance in promoting chemical failure modes in OLED devices.     

Synthesis and microbial screening of 8-(benzyloxy)-5-(2-[1,3-diphenyl-1H-pyrazol-4-yl]thiazol-4-yl)quinolin-2(1H)-one derivatives

The present investigation describe the synthesis of 8-(benzyloxy)-5-(2-[1,3-diphenyl-1H-pyrazol-4-yl]thiazol-4-yl)quinolin-2(1H)-one derivatives. Quinolin-8-ol was transformed by five step synthetic procedures into 8-Benzyloxy-5-(2-bromo-acetyl)-1H-quinolin-2-one. Subsequently, 8-Benzyloxy-5-(2-bromo-acetyl)-1H-quinolin-2-one condensed with 1,3-Diphenyl-1H-pyrazole-4-carbothioic acid amide in the presence of acetonitrile to afford 8-(benzyloxy)-5-(2-[1,3-diphenyl-1H-pyrazol-4-yl]thiazol-4-yl)quinolin-2(1H)-one derivatives. Synthesized compounds were screened for their antimicrobial activity against gram-positive and gram-negative bacteria. Most of the synthesized compounds are found to be active against tested bacterial strains and fungal strain.     

Excited state intervalence transfer in a rigid polymeric film

The ligand-bridged complex cis,cis-[(bpy)2ClRu(pz)RuCl(bpy)2]2+ as the PF6- salt, (1)(PF6)2, is stabilized toward photochemical ligand loss in poly(methyl methacrylate) (PMMA). Stabilization allows measurement of metal-to-ligand charge transfer (MLCT) photophysical properties--emission and transient absorption. This includes appearance of an intervalence transfer absorption band in the near IR spectrum of the photochemically prepared, mixed valence form, [(bpy)2ClRuIII(pz(-*))RuIICl(bpy)2](PF6)2* (1*(PF6)2). Comparison of its IT band properties with those of ground state cis,cis-(bpy)2ClRuIII(pz)RuIICl(bpy)2]3+ in CD3CN allows a comparison to be made between pz and pz(-*) as bridging ligands. A model based on differences between rigid and fluid media provides an explanation for decreased IT band energies and widths in PMMA and provides important insight into electron transfer in rigid media.     

Synthesis,thermodynamic, photophysical and DFT studies of some trivalent metal chelates of a hexadentate tripodal hydroxyquinolinate-based ligand

The synthesis, complexation, evaluation of solution thermodynamics and photophysical properties of multidentate chelator 5-[[3-[(8-hydroxy-5-quinolyl)methoxy]-2-[(8-hydroxy-5-quinolyl)methoxy methyl]-2-methylpropoxy]methyl]quinolin-8-ol (TMOM5OX) with trivalent Fe, Al and Cr ions is described. The corresponding complexes were probed by elemental analysis, mass, infrared, absorption and emission spectroscopy, potentiometry, and theoretical (DFT) studies. The thermodynamically stable and soluble M³⁺ complexes show stability constants in the range log β₁₁₀ = 23–30 and pM in the range of 19–30. The ligand forms distorted octahedral complexes in a tripodal orchestration and firmly binds metal ion over wide pH range. Density functional theory with B3LYP functional and 6-311G* basis set was employed for optimization, vibrational modes, NBO analysis, excitation and emission properties of the protonated, neutral, deprotonated states of the ligand and its ferric complex. The photophysical properties of TMOM5OX obtained by TD-DFT calculations showed good agreement with the experimental data. The result of NBOs and frontier molecular orbital analysis of ground and excited states of the metal complexes of TMOM5OX were used to explain the nature of the metal center.     

Facile preparation of a three-coordinate copper(I) complex: Steric hindrance,supramolecular structure,optical property and TD-DFT study

The solution reaction of Cu(CH₃CN)₄(PF₆) with a NN ligand 2-(2′-quinolyl)benzimidazole and a sterically bulky P ligand tris(2-methylphenyl)phosphine facilely yielded the three-coordinate copper(I) complex [Cu(2-QBI)(o-Tol₃P)](PF₆) (1). The complex has been characterized by single-crystal X-ray diffraction, Fourier Transform infrared spectroscopy and elemental analysis, UV–Vis (ultraviolet–visible) and photoluminescent spectroscopy studies. Time-dependent density functional theory has been used for calculating the electronic origin of the low-lying excited states, which were unexpectedly assigned mainly as a ligand-to-ligand or an intra-ligand charge transfer state instead of the metal-to-ligand charge transfer transition. Interestingly, 1 exhibits a concentration-dependent absorption in solution. This absorption behavior is interpreted as some excimer's formation based on the study of supramolecular structure, spectroscopy and calculations.     

Synthesis and characterization of monomeric, oligomeric, and polymeric aluminum 8-hydroxyquinolines

We report the synthesis and characterization of monomeric, oligomeric, and polymeric aluminum 8-hydroxyquinolines. The new structures of aluminum quinolate are contrived for expanding the application of AlQ(3) in the area of solution process by modifying AlQ(3) structure for improving solution processibility and crystallization resistance. Oligomeric aluminum 8-hydroxyquinoline (OALQ) was obtained using methylaluminoxane (MAO) and 8-hydroxyquinoline (8-HQ). Polymeric aluminum 8-hydroxyquinoline (PALQ) consists of 8-HQ and a polymeric Al-O backbone, simply prepared by stoichiometrically reacting 8-hydroxyquinoline, pentaerythritol propoxylate, and triethyl aluminum in the presence of chloroform. The absorption and emission spectra of OALQ and PALQ bear a clear resemblance to those of AlQ(3), and the molecular orbitals of OALQ and PALQ are virtually identical to those of AlQ(3). In the SEM images of AlQ(3) and OALQ, cylindrical rods of >100 microm in length and 5-10 microm in diameter for AlQ(3) and 20-100 microm in length and 1-5 microm in diameter for OALQ were observed, respectively. The size of the cylindrical rods of OALQ decreased compared with that of AlQ(3). As for the image of PALQ, an amorphous phase with bulge spots (ca. 5 microm) was observed. These microscope data correspond well to the X-ray powder pattern results. The chemical shifts (31.1, 57.0 ppm) and peak broadness of (27)Al NMR of AlQ(3) and its DFT calculation results present that mer- and fac-AlQ(3) appear in equilibrium through pentacoordinated intermediates. With the combination of DFT optimization and NMR calculation, models of OALQ and PALQ, hexa-, penta-, and tetracoordinated structures, were proposed, which exist in polymeric Al-O backbone and with inter- and intracoordination of Al-O bonds.     

The role of CH-π interaction in the charge transfer properties in tris(8-hydroxyquinolinato)aluminium(III)

The charge mobility is a key property in many electro-optical materials, with charge transfer (CT) taking place in a solid matrix of molecules. Large intermolecular electronic interaction is one of the key factors for a good CT rate, which is dependent on both intra- and intermolecular structures. The connection of the molecular structure with the intermolecular CT property would facilitate the search for a new material with desirable CT property, but currently it is still quite limited by the lack of knowledge for intermolecular configurations. In the present work, we study factors influencing the intermolecular configurations, and subsequently the CT property, in tris(8-hydroxyquinolinato) aluminium(III) (AlQ(3)) from all currently available crystal structures. We found that there exists a pair of CH-π interactions in a good majority of the π-π stacked bimolecular configurations. Such CH-π and π-π interacting structures are also seen in the crystal structures of many other similar molecules. With both experimental and simulated structures, we show that the CH-π interaction stabilizes the bimolecular configurations, and drives the structure towards a region with a higher electron transfer coupling and lower hole transfer coupling. This effect likely affects the electron transport property of AlQ(3), since it is consistent with recent experimental results, where AlQ(3) analogs with their CH-π interaction blocked either require a higher operating voltage in light-emitting devices [Sapochak et al., J. Am. Chem. Soc., 2001, 123, 6300], or become bipolar in their charge mobilities [Liao et al., J. Am. Chem. Soc., 2009, 131, 763]. CH-π interaction is commonly seen in aromatic molecules, which are frequently used as building blocks in molecules for electro-optical applications. Our work points out a possible way to enhance the desired CT property in the design of new materials.