Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

Ni2P Interlayer and Mn Doping Synergistically Expedite the Hydrogen Evolution Reaction Kinetics of Co2P

Transition metal phosphide is regarded as one of the most promising candidates to replace noble-metal hydrogen evolution reaction (HER) electrocatalysts. Nevertheless, the controllable design and synthesis of transition metal phosphide electrocatalysts with efficient and stable electrochemical performance are still very challenging. Herein, a novel hierarchical HER electrocatalyst consisting of three-dimensional (3D) coral-like Mn-doped Co₂P@an intermediate layer of Ni₂P generated in situ by phosphorization on Ni foam (MnCoP/NiP/NF) is reported. Notably, both the incorporation of Mn and introduction of the Ni₂P interlayer promote Co atoms to carry more electrons, which is beneficial to reduce the force of the Co−H bond and optimize the adsorption energy of hydrogen intermediate (|ΔG_H*|), thereby making MnCoP/NiP/NF exhibit outstanding HER performance with onset overpotential and Tafel slope as low as 31.2 mV and 61 mV dec⁻¹, respectively, in 1 m KOH electrolyte.     

PtM/MxBy (M=Ni,Co, Fe) Heterostructured Nanobundles as Advanced Electrocatalyst for Hydrogen Evolution Reaction

Optimizing the electronic and synergistic effect of hybrid electrocatalysts based on Pt and Pt-based nanocatalysts is of tremendous importance towards a superior hydrogen evolution performance under both acidic and alkaline conditions. However, developing an ideal Pt-based hydrogen evolution reaction (HER) electrocatalyst with moderated electronic structure as well as strong synergistic effect is still a challenge. Herein, we fabricated boron (B)-doped PtNi nanobundles by a two-step method using NaBH₄ as the boron source to obtain PtNi/Ni₄B₃ heterostructures with well-defined nanointerfaces between PtNi and Ni₄B₃, achieving an enhanced catalytic HER performance. Especially, the PtNi/Ni₄B₃ nanobundles (PtNi/Ni₄B₃ NBs) can deliver a current density of 10 mA cm⁻² at the overpotential of 14.6 and 26.5 mV under alkaline and acidic media, respectively, as well as outstanding electrochemical stability over 40 h at the current density of 10 mA cm⁻². Remarkably, this approach is also universal for the syntheses of PtCo/Co₃B and PtFe/Fe₄₉B with outstanding electrocatalytic HER performance.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

RuP2‐Based Catalysts with Platinum‐like Activity and Higher Durability for the Hydrogen Evolution Reaction at All pH Values

Highly active, stable, and cheap Pt‐free catalysts for the hydrogen evolution reaction (HER) are under increasing demand for future energy conversion systems. However, developing HER electrocatalysts with Pt‐like activity that can function at all pH values still remains as a great challenge. Herein, based on our theoretical predictions, we design and synthesize a novel N,P dual‐doped carbon‐encapsulated ruthenium diphosphide (RuP₂@NPC) nanoparticle electrocatalyst for HER. Electrochemical tests reveal that, compared with the Pt/C catalyst, RuP₂@NPC not only has Pt‐like HER activity with small overpotentials at 10 mA cm⁻² (38 mV in 0.5 m H₂SO₄, 57 mV in 1.0 m PBS and 52 mV in 1.0 m KOH), but demonstrates superior stability at all pH values, as well as 100 % Faradaic yields. Therefore, this work adds to the growing family of transition‐metal phosphides/heteroatom‐doped carbon heterostructures with advanced performance in HER.     

Synchronous Electrocatalytic Design of Architectural and Electronic Structure Based on Bifunctional LDH-Co3O4/NF toward Water Splitting

The rational design of highly efficient bifunctional electrocatalysts for water splitting is extremely urgent for application in sustainable energy conversion processes to alleviate the energy crisis and environmental pollution. In this work, through simple deposition of layered double hydroxides (LDH) on Co₃O₄/NF (NF=nickel foam) nanosheets arrays, hierarchical Co³⁺-rich materials based on LDH-Co₃O₄/NF are prepared as highly active and stable electrocatalysts for water splitting. The NiFe-LDH-Co₃O₄/NF demonstrates excellent electrochemical activity with an overpotential of 214 mV for the OER and an overpotential of 162 mV for the HER at 10 mA cm⁻². Such a performance is attributed to the optimized electronic states with a high concentration of Co³⁺, which improves the intrinsic activity, and the sheet-on-sheet hierarchical structure, which increases the number of active sites. The unique synchronous design of both the architectural and electronic structure of nanomaterials can simultaneously accelerate the reaction kinetics and provide a more convenient charge transfer path. Therefore, the strategy reported herein may open a new pathway for the design of excellent electrocatalysts for water splitting.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Hierarchical Architectures Based on Ru Nanoparticles/Oxygen-Rich-Carbon Nanotubes for Efficient Hydrogen Evolution

Highly active and durable electrocatalysts are essential for producing hydrogen fuel through the hydrogen evolution reaction (HER). Here, a uniform deposition of Ru nanoparticles strongly interacting with oxygen-rich carbon nanotube architectures (Ru-OCNT) through ozonation and hydrothermal approaches has been designed. The hierarchical structure of Ru-OCNT is made by self-assembly of oxygen functionalities of OCNT. Ru nanoparticles interact strongly with OCNT at the Ru/OCNT interface to give excellent catalytic activity and stability of the Ru-OCNT, as further confirmed by density functional theory. Owing to the hierarchical structure and adjusted surface chemistry, Ru-OCNT has an overpotential of 34 mV at 10 mA cm⁻² with a Tafel slope of 27.8 mV dec⁻¹ in 1 M KOH, and an overpotential of 55 mV with Tafel slope of 33 mV dec⁻¹ in 0.5 M H₂SO₄. The smaller Tafel slope of Ru-OCNT than Ru-CNT and commercial Pt/C in both alkaline and acidic electrolytes indicates high catalytic activity and fast charge transfer kinetics. The as-proposed chemistry provides the rational design of hierarchically structured CNT/nanoparticle electrocatalysts for HER to produce hydrogen fuel.     

Electrodeposited Co<Subscript>1-x</Subscript>Mo<Subscript>x</Subscript>S thin films as highly efficient electrocatalysts for hydrogen evolution reaction in acid medium

Efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER) are significant for the advancement of effective water splitting reaction. Herein, we describe the growth of cobalt molybdenum sulfide (CoMoS) at different composites of tightly packed nanocrystals, prepared by one step process of simple electrodeposition method on fluorine-doped tin oxide (FTO) substrate as highly active and low-cost HER electrocatalyst. The prepared electrocatalysts were characterized via various analytical techniques. The HER activity was evaluated through electrochemical methods such as cyclic voltammetry technique and impedance analysis. Exhaustive electrochemical examinations show that the Co_0.95Mo_0.05S achieved higher cathodic current density value of 14.3 mA/cm² at η?=?250 mV with a lowest Tafel slope value towards HER. Furthermore, the active surface area of the as-deposited composite materials has been calculated by cyclic voltammetry analysis. Hence, the present work illustrates that the Co_0.95Mo_0.05S composite can serve as an encouraging cost-effective substitute to platinum-based electrocatalyst for HER.     

Accelerating H2 Evolution by Anodic Semi-dehydrogenation of Tetrahydroisoquinolines in Water over Co3O4 Nanoribbon Arrays Decorated Nickel Foam

Coupling the H₂ evolution reaction in water with thermodynamically favorable organic oxidation reactions is highly desirable, because it can enhance the energy conversion efficiency compared with electrocatalytic water splitting, and produce value-added chemicals instead of O₂ in the anodic reaction. Herein, Co₃O₄ nanoribbon arrays in situ grown on nickel foam (Co₃O₄@NF) was employed as an effective electrocatalyst for the selective oxidation of tetrahydroisoquinolines (THIQs). Various value-added semi-dehydrogenation products including dihydroisoquinolines with electro-deficient or -rich groups could be obtained with moderate yields and faradaic efficiencies. Benefitting from the rich surface active sites of Co₃O₄@NF, a two-electrode (Co₃O₄@NF||Pt) electrolytic system drove a benchmark current density of 10 mA cm⁻² at a cell voltage as low as 1.446 V in 1.0 M KOH aqueous solution containing 0.02 M THIQ, which was reduced by 174 mV in comparison with that of overall water splitting.     

Phase-mediated cobalt phosphide with unique core-shell architecture serving as efficient and bifunctional electrocatalyst for hydrogen evolution and oxygen reduction reaction

Hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) have been considered as two critical processes in the field of electrocatalytic water-splitting for hydrogen production and fuel cells. However, the sluggish reaction kinetics of HER and ORR required efficient electrocatalyst such as Pt to promote such process. Transition metal phosphides (TMPs) exhibit great potential to replace noble metal electrocatalysts to accelerate HER and ORR due to their high activity and easy availability. Herein, a highly-efficient bifunctional CoP electrocatalyst for HER and ORR, featuring a unique core-shell structure decorated on nitrogen-doped carbon matrix was designed and constructed via etching a cobalt-based zeolitic imidazolate framework (ZIF-67) with phytic acid (PA) followed by pyrolysis treatment (PA-ZIF-67–900). Experimental results revealed that the pure-phase single-crystalline CoP exhibited outstanding electrocatalytic performance in HER and ORR, superior to Co(PO₃)₂ in PA-ZIF-67–700, hybrid phase of Co(PO₃)₂ and CoP in PA-ZIF-67–800 and Co₂P-doped CoP in PA-ZIF-67–1000. To reach the current density of 10 mA/cm² the as-synthesized CoP required an overpotential of 120 mV for HER in 1 mol/L KOH and half-wave potential of 0.85 V in O₂-saturated 0.1 mol/L KOH. This work present new clue for construction of efficient and bifunctional electrocatalyst in the field of energy conversion and storage     

Phosphorus‐Modified Tungsten Nitride/Reduced Graphene Oxide as a High‐Performance,Non‐Noble‐Metal Electrocatalyst for the Hydrogen Evolution Reaction

Phosphorus‐modified tungsten nitride/reduced graphene oxide (P‐WN/rGO) is designed as a high‐efficient, low‐cost electrocatalyst for the hydrogen evolution reaction (HER). WN (ca. 3 nm in size) on rGO is first synthesized by using the H₃[PO₄(W₃O₉)₄] cluster as a W source. Followed by phosphorization, the particle size increase slightly to about 4 nm with a P content of 2.52 at %. The interaction of P with rGO and WN results in an obvious increase of work function, being close to Pt metal. The P‐WN/rGO exhibits low onset overpotential of 46 mV, Tafel slope of 54 mV dec⁻¹, and a large exchange current density of 0.35 mA cm⁻² in acid media. It requires overpotential of only 85 mV at current density of 10 mA cm⁻², while remaining good stability in accelerated durability testing. This work shows that the modification with a second anion is powerful way to design new catalysts for HER.     

高效析氧电催化剂Co3O4@NiMn-LDH异质结构阵列的制备

我们合理设计和制备了一种新型的高性能析氧电催化剂——泡沫镍负载Co_3O_4@NiMn-LDH(层状双金属氢氧化物)三维异质结构阵列(Co_3O_4@NiMn-LDH/NF)。这种基于泡沫镍基底的三维异质结构催化剂经简单的两步水热反应即可制得。对比Co_3O_4、NiMn-LDH及传统RuO2催化剂,所制备的Co_3O_4@NiMn-LDH/NF催化剂展示出更优异的电催化析氧性能。在1 mol·L~(-1)KOH溶液中,电流密度为50 mA·cm~(-2)时的过电势仅为282 mV,塔菲尔斜率为64 mV·dec~(-1)。通过有效的界面工程设计,使异质结构陈列Co_3O_4@NiMn-LDH发挥出Co_3O_4和NiMn-LDH各自优异的电催化性能。其中,基于泡沫镍基底生长的活性组分Co_3O_4纳米线阵列作为中间核支撑结构,保持了良好的空隙率,不仅有利于暴露更多的活性位点,而且有利于电解液的扩散和气体产物的释放;而依附于Co_3O_4纳米线阵列上的NiMn-LDH异质结构纳米片层则富有更多的亲水性基团,使得活性位点更易与水结合,从而促进氧析出反应的进行。     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Defect-enriched heterointerfaces N–MoO2–Mo2C supported Pd nanocomposite as a novel multifunctional electrocatalyst for oxygen reduction reaction and overall water splitting

Developing highly efficient, cost-saving, and durable multifunctional electrocatalysts for oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER) continues to be a significant challenge in the energy field. In this work, we decide to prepare an unusual multifunctional electrocatalyst, such as icosahedral palladium nanocrystals (PdNCs) encapsulating on N–MoO₂–Mo₂C half-hollow nanotube (HHNT) heterointerface, using an in-situ chemical reaction and following sonic probe irradiation method. All the experiments demonstrate that special defect-enriched heterointerfaces N–MoO₂–Mo₂C supported Pd nanocomposite can greatly improve the ORR activity (E_onset = 1.01 V and E_1/2 = 0.90 V) with good stability, outstanding HER (η₁₀ = 65 mV) and OER (η₁₀ = 180 mV) performances than those of commercial precious electrocatalysts (Platinum on carbon [Pt/C] and ruthenium oxide [RuO₂]). The overall water splitting electrolyzer fabricates by Pd/N–MoO₂–Mo₂C as both anode and cathode electrodes to achieve a current density of 10 Ma/cm² at a cell voltage of 1.56 V, which surpasses the most recent reported electrocatalysts.     

Hierarchical NiCo2O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water‐Splitting

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo₂O₄) has been considered a promising electrode material for the OER. However, NiCo₂O₄ that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self‐assembled hierarchical NiCo₂O₄ hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo₂O₄ electrode shows excellent activity toward overall water splitting, with 10 mA cm^?2 water‐splitting current reached by applying just 1.65 V and 20 mA cm^?2 by applying just 1.74 V across the two electrodes. The synthesis of NiCo₂O₄ microflowers confirms the importance of structural features for high‐performance overall water splitting.     

High Valence State Sites as Favorable Reductive Centers for High-Current-Density Water Splitting

Electrochemical water splitting is a promising approach for producing sustainable and clean hydrogen. Typically, high valence state sites are favorable for oxidation evolution reaction (OER), while low valence states can facilitate hydrogen evolution reaction (HER). However, here we proposed a high valence state of Co³⁺ in Ni_9.5Co_0.5−S−FeO_x hybrid as the favorable center for efficient and stable HER, while structural analogues with low chemical states showed much worse performance. As a result, the Ni_9.5Co_0.5−S−FeO_x catalyst could drive alkaline HER with an ultra-low overpotential of 22 mV for 10 mA cm⁻², and 175 mV for 1000 mA cm⁻² at the industrial temperature of 60 °C, with an excellent stability over 300 h. Moreover, this material could work for both OER and HER, with a low cell voltage being 1.730 V to achieve 1000 mA cm⁻² for overall water splitting at 60 °C. X-ray absorption spectroscopy (XAS) clearly identified the high valence Co³⁺ sites, while in situ XAS during HER and theoretical calculations revealed the favorable electron capture at Co³⁺ and suitable H adsorption/desorption energy around Co³⁺, which could accelerate the HER. The understanding of high valence states to drive reductive reactions may pave the way for the rational design of energy-related catalysts.     

Ultrafine Molybdenum Carbide Nanoparticles Composited with Carbon as a Highly Active Hydrogen‐Evolution Electrocatalyst

The replacement of platinum with non‐precious‐metal electrocatalysts with high efficiency and superior stability for the hydrogen‐evolution reaction (HER) remains a great challenge. Herein, we report the one‐step synthesis of uniform, ultrafine molybdenum carbide (Mo₂C) nanoparticles (NPs) within a carbon matrix from inexpensive starting materials (dicyanamide and ammonium molybdate). The optimized catalyst consisting of Mo₂C NPs with sizes lower than 3 nm encapsulated by ultrathin graphene shells (ca. 1–3 layers) showed superior HER activity in acidic media, with a very low onset potential of ?6 mV, a small Tafel slope of 41 mV dec^?1, and a large exchange current density of 0.179 mA cm^?2, as well as good stability during operation for 12 h. These excellent properties are similar to those of state‐of‐the‐art 20 % Pt/C and make the catalyst one of the most active acid‐stable electrocatalysts ever reported for HER.     

Tuning the Intrinsic Activity and Electrochemical Surface Area of MoS2 via Tiny Zn Doping: Toward an Efficient Hydrogen Evolution Reaction (HER) Catalyst

Molybdenum sulfide (MoS₂) is considered as an alternative material for commercial platinum catalysts for electrocatalytic hydrogen evolution reaction (HER). Improving the apparent HER activity of MoS₂ to a level comparable to that of Pt is an essential premise for the commercial use of MoS₂. In this work, a Zn-doping strategy is proposed to enhance the HER performance of MoS₂. It is shown that tiny Zn doping into MoS₂ leads to the enhancement of the electrochemical surface area, increases in proportion of HER active 1T phase in the material and formation of catalytic sites of higher intrinsic activity. These benefits result in a high-performance HER electrocatalyst with a low overpotential of 190 mV(@10 mA cm⁻²) and a low Tafel slope of 58 mV dec⁻¹. The origin for the excellent electrochemical performance of the doped MoS₂ is rationalized with both experimental and theoretical investigations.     

Interfacial coupling of sea urchin-like (Mo4O11-MoS2-VO2) promoted electron redistributions for significantly boosted hydrogen evolution reaction

Developing efficient electrocatalysts for hydrogen evolution reaction (HER) is of great importance in contemporary water electrolysis technology. Here, a novel hierarchically sea urchin-like electrocatalyst (Mo₄O₁₁-MoS₂-VO₂) is synthesized by hydrothermal deposition and post-annealing strategy. The optimized electrocatalyst behaves as a high active hydrogen evolution electrode in 0.5 mol/L H₂SO₄. This electrode needs overpotential of only 43 mV to achieve 10 mA/cm² with a Tafel slope of 37 mV/dec and maintains its catalytic activity for at least 36 h. Better than most previously reported non-noble metal electrocatalysts anchored on carbon cloth. It is worth mentioning that the hierarchical sea urchin-like structure promotes the redistribution of electrons and provides more catalytic active sites. This strategy shows a way for the construction of inexpensive non-noble metal electrocatalysts in the future.