3D Carbon Foam Supported Edge-Rich N-Doped MoS2 Nanoflakes for Enhanced Electrocatalytic Hydrogen Evolution

Molybdenum disulfide (MoS₂) is one of the most promising alternatives to the Pt-based electrocatalysts for the hydrogen evolution reaction (HER). However, its performance is currently limited by insufficient active edge sites and poor electron transport. Hence, enormous efforts have been devoted to constructing more active edge sites and improving conductivity to obtain enhanced electrocatalytic performance. Herein, the 3D carbon foam (denoted as CF) supported edge-rich N-doped MoS₂ nanoflakes were successfully fabricated by using the commercially available polyurethane foam (PU) as the 3D substrate and PMo₁₂O₄₀³⁻ clusters (denoted as PMo₁₂) as the Mo source through redox polymerization, followed by sulfurization. Owing to the uniform distribution of nanoscale Mo sources and 3D carbon foam substrate, the as-prepared MoS₂-CF composite possessed well-exposed active edge sites and enhanced electrical conductivity. Systematic investigation demonstrated that the MoS₂-CF composite showed high HER performance with a low overpotential of 92 mV in 1.0 m KOH and 155 mV in 0.5 m H₂SO₄ at a current density of 10 mA cm⁻². This work offers a new pathway for the rational design of MoS₂-based HER electrocatalysts.     

Controlled Synthesis of Ni-Doped MoS2 Hybrid Electrode for Synergistically Enhanced Water-Splitting Process

The development of high-efficiency, low-cost, and earth-abundant electrocatalysts for overall water splitting remains a challenge. In this work, Ni-modified MoS₂ hybrid catalysts are grown on carbon cloth (Ni-Mo-S@CC) through a one-step hydrothermal treatment. The optimized Ni-Mo-S@CC catalyst shows excellent hydrogen evolution reaction (HER) activity with a low overpotential of 168 mV at a current density of 10 mA cm⁻² in 1.0 m KOH, which is lower than those of Ni-Mo-S@CC (1:1), Ni-Mo-S@CC (3:1), and pure MoS₂. Significantly, the Ni-Mo-S@CC hybrid catalyst also displays outstanding oxygen evolution reaction (OER) activity with a low overpotential of 320 mV at a current density of 10 mA cm⁻², and remarkable long-term stability for 30 h at a constant current density of 10 mA cm⁻². Experimental results and theoretical analysis based on density functional theory demonstrate that the excellent electrocatalytic performance can be attributed mainly to the remarkable conductivity, abundant active sites, and synergistic effect of the Ni-doped MoS₂. This work sheds light on a unique strategy for the design of high-performance and stable electrocatalysts for water-splitting electrolyzers.     

Facile and Large-Scale Fabrication of Sub-3 nm PtNi Nanoparticles Supported on Porous Carbon Sheet: A Bifunctional Material for the Hydrogen Evolution Reaction and Hydrogenation

Facile and large-scale preparation of materials with uniform distributions of ultrafine particles for catalysis is a challenging task, and it is even more difficult to obtain catalysts that excel in both the hydrogen evolution reaction (HER) and hydrogenation, which are the corresponding merging and splitting procedures of hydrogen, respectively. Herein, the fabrication of ultrafine bimetallic PtNi nanoparticles embedded in carbon nanosheets (CNS) by means of in situ self-polymerization and annealing is reported. This bifunctional catalyst shows excellent performance in the hydrogen evolution reaction (HER) and the hydrogenation of p-nitrophenol. Remarkably PtNi bimetallic catalyst with low metal loading (PtNi₂@CNS-600, 0.074 wt % Pt) exhibited outstanding HER activity with an overpotential as low as 68 mV at a current density of 10 mA cm⁻² with a platinum loading of only 0.612 μg_Pt cm⁻² and Tafel slope of 35.27 mV dec⁻¹ in a 0.5 m aqueous solution of H₂SO₄, which is comparable to that of the 20 % Pt/C catalyst (31 mV dec⁻¹). Moreover, it also shows superior long-term electrochemical durability for at least 30 h with negligible degradation compared with 20 % Pt/C. In addition, the material with increased loading (mPtNi₂@CNS-600, 2.88 % Pt) showed robust catalytic activity for hydrogenation of p-nitrophenol at ambient pressure and temperature. The catalytic activity towards hydrogen splitting is a circumstantial evidence that agrees with the Volmer–Tafel reaction path in the HER.     

Activation of MoS2 Basal Planes for Hydrogen Evolution by Zinc

Molybdenum disulfide (MoS₂) has been widely studied as a potential earth‐abundant electrocatalyst for the hydrogen‐evolution reaction (HER). Defect engineering and heteroelemental doping are effective methods to enhance the catalytic activity in the HER, so exploring an efficient route to simultaneously achieve in‐plane vacancy engineering and elemental doping of MoS₂ is necessary. In this study, Zinc, a low‐cost and moderately active metal, has been used to realize this strategy by generation of sulfur vacancies and zinc doping on MoS₂ in one step. Density functional theory calculations reveal that the zinc atoms not only lower the formation energy of S vacancies, but also help to decrease ΔG_H of S‐vacancy sites near the Zn atoms. At an optimal zinc‐reduced MoS₂ (Zn@MoS₂) example, the activated basal planes contribute to the HER activity with an overpotential of ?194 mV at 10 mA cm^?2 and a low Tafel slope of 78 mV/dec.     

Enhancement of electrochemical and catalytic properties of MoS2 through ball-milling

MoS₂ nanosheets of one to few layer thickness present novel electronic and enhanced catalytic properties with respect to the bulk material. Here we show that a simple and highly scalable ball-milling procedure can lead to significant improvements of the electrochemical and catalytic properties of the bulk natural MoS₂. We characterized the material before and after the milling process by means of scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy in order to evaluate morphological and chemical features. We investigated the electrochemical properties by means of voltammetry techniques to monitor the electron transfer with [Fe(CN)₆]^{4 −/3 −} redox probe and the catalytic properties by monitoring the electrochemical hydrogen evolution reaction (HER). A significant overpotential lowering of about 210 mV is obtained for the HER by the ball-milled material when compared to bulk materials. This has a huge potential for the lowering of the energy consumption during hydrogen evolution. Ball-milling offers highly scalable dry method for large scale production of electrocatalyst with enhanced properties.     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

Atmospheric-Temperature Chain Reaction towards Ultrathin Non-Crystal-Phase Construction for Highly Efficient Water Splitting

Combining the self-sacrifice of a highly crystalline substance to design a multistep chain reaction towards ultrathin active-layer construction for high-performance water splitting with atmospheric-temperature conditions and an environmentally benign aqueous environment is extremely intriguing and full of challenges. Here, taking cobalt carbonate hydroxides (CCHs) as the initial crystalline material, we choose the Lewis acid metal salt of Fe(NO₃)₃ to induce an aqueous-phase chain reaction generating free CO₃²⁻ ions with subsequent instant FeCO₃ hydrolysis. The resultant ultrathin (∼5 nm) amorphous Fe-based hydroxide layer on CCH results in considerable activity in catalyzing the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), yielding 10/50 mA ⋅ cm⁻² at overpotentials of 230/266.5 mV for OER and 72.5/197.5 mV for HER. The catalysts can operate constantly in 1.0 M KOH over 48 and 45 h for the OER and HER, respectively. For bifunctional catalysis for alkaline electrolyzer assembly, a cell voltage as low as 1.53 V was necessary to yield 10 mA cm⁻² (1.7 V at 50 mA cm⁻²). This work rationally builds high-efficiency electrochemical bifunctional water-splitting catalysts and offers a trial in establishing a controllable nanolevel ultrathin lattice disorder layer through an atmospheric-temperature chemical route.     

Electrochemically exfoliated Ni-doped MoS2 nanosheets for highly efficient hydrogen evolution and Zn-H2O battery

Thanks to tunable physical and chemical properties, two-dimensional (2D) materials have received intensive interest, endowing their excellent electrocatalytic performances for applications in energy conversion. However, their catalytic activities are largely determined by poor adsorption energy and limited active edge sites. Herein, a one-step electrochemical exfoliation strategy was developed to fabricate 2D Ni-doped MoS₂ nanosheets (Ni-EX-MoS₂) with a lateral size of ～500 nm and thickness of ～3.5 nm. Profiting from high electrical conductivity and abundant exposing active sites, Ni-EX-MoS₂ catalyst displayed an admirable performance for electrochemical hydrogen evolution reaction (HER) with a low overpotential of 145 mV at 10 mA/cm² as well as a small Tafel slope of 89 mV/dec in alkaline media, which are superior to those of the most reported MoS₂-based electrocatalysts. The formed Ni species with tuning electronic structure played a crucial role as primary active center of Ni-EX-MoS₂, as well as the forming stable 1T/2H phase MoS₂ interface demonstrated a synergistic effect on electrocatalytic HER performance. Further, Ni-EX-MoS₂ was employed as a cathode electrode for alkaline Zn-H₂O battery, which displayed a high power density of 3.3 mW/cm² with excellent stability. This work will provide a simple and effective guideline for design of electrochemically exfoliated transition metal-doped MoS₂ nanosheets to inspire their practical applications in energy catalytic and storage.     

Distance Synergy of MoS2-Confined Rhodium Atoms for Highly Efficient Hydrogen Evolution

Perturbing the electronic structure of the MoS₂ basal plane by confining heteroatoms offers the opportunity to trigger in-plane activity for the hydrogen evolution reaction (HER). The key challenge consists of inducing the optimum HER activity by controlling the type and distribution of confined atoms. A distance synergy of MoS₂-confined single-atom rhodium is presented, leading to an ultra-high HER activity at the in-plane S sites adjacent to the rhodium. By optimizing the distance between the confined Rh atoms, an ultra-low overpotential of 67 mV is achieved at a current density of 10 mA cm⁻² in acidic solution. Experiments and first-principles calculations demonstrate a unique distance synergy between the confined rhodium atoms in tuning the reactivity of neighboring in-plane S atoms, which presents a volcanic trend with the inter-rhodium distance. This study provides a new strategy to tailor the activity of MoS₂ surface via modulating the distance between confined single atoms.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Ligand Modulation of Active Sites to Promote Cobalt-Doped 1T-MoS2 Electrocatalytic Hydrogen Evolution in Alkaline Media

Highly efficient hydrogen evolution reaction (HER) electrocatalyst will determine the mass distributions of hydrogen-powered clean technologies, while still faces grand challenges. In this work, a synergistic ligand modulation plus Co doping strategy is applied to 1T−MoS₂ catalyst via CoMo-metal-organic frameworks precursors, boosting the HER catalytic activity and durability of 1T−MoS₂. Confirmed by Cs corrected transmission electron microscope and X-ray absorption spectroscopy, the polydentate 1,2-bis(4-pyridyl)ethane ligand can stably link with two-dimensional 1T−MoS₂ layers through cobalt sites to expand interlayer spacing of MoS₂ (Co−1T−MoS₂-bpe), which promotes active site exposure, accelerates water dissociation, and optimizes the adsorption and desorption of H in alkaline HER processes. Theoretical calculations indicate the promotions in the electronic structure of 1T−MoS₂ originate in the formation of three-dimensional metal-organic constructs by linking π-conjugated ligand, which weakens the hybridization between Mo-3d and S-2p orbitals, and in turn makes S-2p orbital more suitable for hybridization with H-1s orbital. Therefore, Co−1T−MoS₂-bpe exhibits excellent stability and exceedingly low overpotential for alkaline HER (118 mV at 10 mA cm⁻²). In addition, integrated into an anion-exchange membrane water electrolyzer, Co−1T−MoS₂-bpe is much superior to the Pt/C catalyst at the large current densities. This study provides a feasible ligand modulation strategy for designs of two-dimensional catalysts.     

TiO2 nanorods based self-supported electrode of 1T/2H MoS2 nanosheets decorated by Ag nano-particles for efficient hydrogen evolution reaction

Molybdenum disulfide (MoS₂) has shown significant promise as an economic hydrogen evolution reaction (HER) catalyst for hydrogen generation, but its catalytic performance is still lower than noble metal-based catalysists. Herein, a silver nanoparticles (Ag NPs)-decorated 1T/2H phase layered MoS₂ electrocatalyst grown on titanium dioxide nanorod arrays (Ag NPs/1T(2H) MoS₂/TNRs) was prepared through acid-tunable ammonium ion intercalation. Taking advantage of MoS₂ layered structure and crystal phase controllability, as-prepared Ag NPs/1T(2H) MoS₂/TNRs exhibited ultrahigh HER activity. As-proposed strategy combines facile hydrogen desorption (Ag NPs) with efficient hydrogen adsorption (1T/2H MoS₂) effectively circumventes the kinetic limitation of hydrogen desorption by 1T/2H MoS₂. The as-prepared Ag NPs/1T(2H) MoS₂/TNRs electrocatalyst exhibited excellent HER activity in 0.5 mol/L H₂SO₄ with low overpotential (118 mV vs. reversible hydrogen electrode (RHE)) and small Tafel slope (38.61 mV/dec). The overpotential exhibts no obvious attenuation after 10 h of constant current flow. First-principles calculation demonstrates that as-prepared 1T/2H MoS₂ exhibit a large capacity to store protons. These protons can be subsequently transferred to Ag NPs, which significantly increases the hydrogen coverage on the surface of Ag NPs in HER process and thus change the rate-determining step of HER on Ag NPs from water dissociation to hydrogen recombination. This study provides a unique strategy to improve the catalytic activity and stability for MoS₂-based electrocatalyst.     

Structural Transformation of SnS2 to SnS by Mo Doping Produces Electro/Photocatalyst for Hydrogen Production

SnS and SnS₂ are layered semiconductors, with potential promising properties for electro- and photocatalytic hydrogen (H₂) production. The vast knowledge in preparation and modification of layered structures was still not employed successfully in this system to fully maximize its potential. Here, the first report of structural transformation of SnS₂ into SnS with Mo-doping as a bifunctional catalyst for the hydrogen evolution reaction (HER) is reported. The structural phase transition optimized the properties of the material, providing a more delicate morphology with additional catalytic sites. The electrochemical studies showed overpotential of 377 mV at 10 mA cm⁻² for HER with Tafel slopes of 100 mV dec⁻¹ in 0.5 m H₂SO₄ for 10 % Mo-SnS. The same structure acts as an efficient photocatalyst in the generation of H₂ from water under visible illumination with rate of 0.136 mmol g⁻¹ h⁻¹ of H₂, which is 20 times higher than pristine SnS₂ under visible light.     

Hierarchical Nanoboxes Composed of Co9S8−MoS2 Nanosheets as Efficient Electrocatalysts for the Hydrogen Evolution Reaction

The development of hydrogen evolution catalysts based on nonprecious metals is essential for the practical application of water‐splitting devices. Herein, the synthesis of Co₉S₈?MoS₂ hierarchical nanoboxes (HNBs) as efficient catalysts for the hydrogen evolution reaction (HER) is reported. The surface of the hollow cubic structure was organized by CoMoS₄ nanosheets formed through the reaction of MoS₄^2? and Co²⁺ released from the cobalt zeolite imidazole framework (ZIF‐67) templates under reflux in a mixture of water/ethanol. The formation process for the CoMoS₄ HNB structures was characterized by TEM images recorded at various reaction temperatures. The amorphous CoMoS₄ HNBs were converted through sequential heat treatments into CoS_x?MoS₂ and Co₉S₈?MoS₂ HNBs. Owing to their unique chemical compositions and structural features, Co₉S₈?MoS₂ HNBs have a high specific surface area (124.6 m² g^?1) and superior electrocatalytic performances for the HER. The Co₉S₈?MoS₂ HNBs exhibit a low overpotential (η₁₀) of 106 mV, a low Tafel slope of 51.8 mV dec^?1, and long‐term stability in an acidic medium. The electrocatalytic activity of Co₉S₈?MoS₂ HNBs is superior to that of recently reported values, and these HNBs prove to be promising candidates for the HER.     

High Valence State Sites as Favorable Reductive Centers for High-Current-Density Water Splitting

Electrochemical water splitting is a promising approach for producing sustainable and clean hydrogen. Typically, high valence state sites are favorable for oxidation evolution reaction (OER), while low valence states can facilitate hydrogen evolution reaction (HER). However, here we proposed a high valence state of Co³⁺ in Ni_9.5Co_0.5−S−FeO_x hybrid as the favorable center for efficient and stable HER, while structural analogues with low chemical states showed much worse performance. As a result, the Ni_9.5Co_0.5−S−FeO_x catalyst could drive alkaline HER with an ultra-low overpotential of 22 mV for 10 mA cm⁻², and 175 mV for 1000 mA cm⁻² at the industrial temperature of 60 °C, with an excellent stability over 300 h. Moreover, this material could work for both OER and HER, with a low cell voltage being 1.730 V to achieve 1000 mA cm⁻² for overall water splitting at 60 °C. X-ray absorption spectroscopy (XAS) clearly identified the high valence Co³⁺ sites, while in situ XAS during HER and theoretical calculations revealed the favorable electron capture at Co³⁺ and suitable H adsorption/desorption energy around Co³⁺, which could accelerate the HER. The understanding of high valence states to drive reductive reactions may pave the way for the rational design of energy-related catalysts.     

A General Route to Prepare Low-Ruthenium-Content Bimetallic Electrocatalysts for pH-Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH-universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru-M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH-universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm⁻² in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm⁻². This performance is among the best catalytic activities reported for any platinum-free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Ultrasmall Cu7S4@MoS2 Hetero‐Nanoframes with Abundant Active Edge Sites for Ultrahigh‐Performance Hydrogen Evolution

Increasing the active edge sites of molybdenum disulfide (MoS₂) is an efficient strategy to improve the overall activity of MoS₂ for the hydrogen‐evolution reaction (HER). Herein, we report a strategy to synthesize the ultrasmall donut‐shaped Cu₇S₄@MoS₂ hetero‐nanoframes with abundant active MoS₂ edge sites as alternatives to platinum (Pt) as efficient HER electrocatalysts. These nanoframes demonstrate an ultrahigh activity with 200 mA cm^?2 current density at only 206 mV overpotential using a carbon‐rod counter electrode. The finding may provide guidelines for the design and synthesis of efficient and non‐precious chalcogenide nanoframe catalysts.     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。