Synthesis and characterization of scandium complexes with reduced ligands: Crystal structures of Cp∗ScI2, [Cp∗ScI(bpy)]2, and [Cp∗ScCl(bpy)]2

The synthesis and characterization of complexes containing a Cp∗Sc(R₂bpy) (Cp∗ = pentamethylcyclopentadienyl, bpy = 4,4′-R,R-2,2′-bipyridine, R = H, Me) motif are described. Cp∗ScI₂ (1) was prepared from Cp∗Sc(acac)₂ (acac = acetylacetonate) and AlI₃ (2 equiv) in pentane. Compound 1 reacted with bipyridine and 4,4′-dimethyl-2,2′-bipyridine (dmb) in benzene to yield Cp∗ScI₂(bpy) (3) and Cp∗ScI₂(dmb) (4), respectively. Compound 3 was reduced by alkali metal reductants such as Na/Hg, NaK₂, and K in aromatic solvents to yield [Cp∗ScI(bpy)]₂ (5). The chloride analog of 5, [Cp∗ScCl(bpy)]₂ (7), was prepared from Cp∗ScCl₂ by salt metathesis with Li₂(dme)₂bpy (6) (dme = dimethoxyethane) in toluene. Compounds 1, 5, and 7 have been structurally characterized. Analysis of the bond distances of the bipyridine ligands in 5 and 7, together with infrared and UV/vis spectroscopic data, suggest that the bipyridine ligands in these molecules exist as radical anions. The bipyridine ligands in 5 and 7 are arranged co-facially and are in close proximity (?3.30 Å), suggesting the presence of a π-π interaction.     

Catalytic hydrogenation of CO and CN bonds via heterolysis of H2 mediated by metal-sulfur bonds of rhodium and iridium thiolate complexes

Coordinatively unsaturated rhodium and iridium complexes having a bulky thiolate, [Cp∗M(PMe₃)(SDmp)](BAr^F₄) (1a: M = Rh; 1b: M = Ir; Dmp = 2,6-(mesityl)₂C₆H₃, Ar^F = 3,5-(CF₃)₂C₆H₃), catalyzed the hydrogenation of benzaldehyde, N-benzylideneaniline, and cyclohexanone, under 1 atm of H₂ at low temperatures. In these catalytic reactions, the M-H/S-H complexes [Cp∗M(PMe₃)(H)(HSDmp)](BAr^F₄) (2a: M = Rh; 2b: M = Ir) generated via H₂ heterolysis by 1a or 1b were suggested to transfer both M-H hydride and S-H proton to substrates. The catalytic reactions were terminated by the dissociation of H-SDmp from the metal centers of 2a and 2b that occurs at ambient temperature under H₂ atmosphere.     

Half-sandwich binuclear carbaborane compounds: Closo-carbaboranes as good σ-donar ligands

The synthesis of half-sandwich binuclear transition-metal complexes containing the Cab^C,C chelate ligands (Cab^C,C = C₂B₁₀H₁₀ (1)) is described. 1Li₂ was reacted with chloride-bridged dimers [Cp∗RhCl(μ-Cl)]₂ (Cp∗ = η⁵-C₅(CH₃)₅), [Cp′RhCl(μ-Cl)]₂ (Cp′ = η⁵-1,3-^tBu₂C₅H₃), [Cp∗IrCl(μ-Cl)]₂ and [(p-cymene)RuCl(μ-Cl)]₂ to give half-sandwich binuclear complexes [Cp∗Rh(μ-Cl)]₂(Cab^C,C) (2), [Cp′Rh(μ-Cl)]₂(Cab^C,C) [3),[Cp∗Ir(μ-Cl)]₂(Cab^C,C) (4) and [(p-cymene)Ru(μ-Cl)]₂(Cab^C,C) (5), respectively. Addition reactions of the ruthenium complex 5 with air gave [(p-cymene)₂Ru₂(μ-OH)(μ-Cl)](Cab^C,C) (6), rhodium complex 2 with LiSPh gave [Cp∗Rh(μ-SPh)]₂(Cab^C,C) (7). The complexes were characterized by IR, NMR spectroscopy and elemental analysis. In addition, X-ray structure analysis were performed on complexes 2-7 where the potential C,C-chelate ligand was found to coordinate in a bidentate mode as a bridge.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Insertion of nitrene and chalcogenolate groups into the Ir-C σ bond in a cyclometalated iridium(III) complex

Treatment of [Cp∗Ir(ppy)Cl] (Cp∗ = η⁵-C₅Me₅, ppyH = 2-(2-pyridyl)phenyl) with Ag(OTf) (OTf⁻ = triflate) in MeOH and MeCN gave the solvento complexes [Cp∗Ir(ppy)(solv)][OTf] (solv = MeOH (1) and MeCN (2)). Complex 1 is capable of catalyzing oxidation and azirdination of styrene with PhIO and PhINTs (Ts = tosyl), respectively. Treatment of 2 with a stoichiometric amount of PhINTs resulted in the insertion of the NTs group into the Ir-C(ppy) bond and formation of [Cp∗Ir(η²-ppy-NTs)(MeCN)][OTf] (3). Treatment of 1 with R₂E₂ afforded [Cp∗Ir(ppy)(η¹-R₂E₂)][OTf] (E = S (4), Se (5), Te (6)). Reactions of 4 and 5 with Ag(OTf) resulted in cleavage of the E-E bond and insertion of an ER group into the Ir-C(ppy) bond. The crystal structures of complexes 2-6 and [Cp∗Ir(η²-ppy-S-p-tol)(H₂O)][OTf]₂ have been determined.     

Metallacarboranes and triple-decker complexes with the (C4Me4)Pt fragment

Complex Cp∗PtCl₂ (Cp∗ = η-C₄Me₄) reacts with the carborane anions [7,8-C₂B₉H₁₁]²⁻ and [9-SMe₂-7,8-C₂B₉H₁₀]⁻ giving platinacarboranes Cp∗Pt(η-7,8-C₂B₉H₁₁) (1) and [Cp∗Pt(η-9-SMe₂-7,8-C₂B₉H₁₀)]⁺ (2), respectively. Reactions of the [Cp∗Pt]²⁺ fragment (as a labile nitromethane solvate) with the sandwich compounds Cp∗Fe(η-C₅H₃Me₂BMe) and Cp∗Rh(η⁵-C₄H₄BPh) afford the triple-decker cations [Cp∗Pt(μ-η:η-C₅H₃Me₂BMe)FeCp∗]²⁺ (3) and [Cp∗Pt(μ-η⁵:η⁵-C₄H₄BPh)RhCp∗]²⁺ (4) with bridging boratabenzene and borole ligands. The structures of 1 and 3(CF₃SO₃)₂ were determined by X-ray diffraction.     

Crystal structures of (azido)(pentamethylcyclopentadienyl)iridium(III) complexes containing various types of bidentate ligands

Several (azido)iridium(III) complexes having a pentamethylcyclopentadienyl (Cp∗) group, [Cp∗Ir(N₃)₂(Ph₂Ppy-κP)] (1: Ph₂Ppy = 2-diphenylphosphinopyridine), [Cp∗Ir(N₃)(Ph₂Ppy-κP,κN)]CF₃SO₃ (2), [Cp∗Ir(N₃)(dmpm)]PF₆ (3: dmpm = bis(dimethylphosphino)methane), [Cp∗Ir(N₃)(Ph₂Pqn)]PF₆·$·$CH₃OH (4·$·$CH₃OH: Ph₂Pqn = 8-diphenylphosphinoquinoline), and [Cp∗Ir(N₃)(pybim)] (5: Hpybim = 2-(2-pyridyl)benzimidazole) have been prepared and their crystal structures have been analyzed by X-ray diffraction. In complex 1, the Ph₂Ppy ligand is only coordinated via the P atom (-κP), while in 2 it acts as a bidentate ligand through the P and N atoms (-κP,κN) to form a four-membered chelate ring. Comparing the structural parameters of the chelate ring in 2 with those of a similar five-membered chelate ring formed by Ph₂Pqn in 4, it became apparent that the angular distortion in the Ph₂Ppy-κP,κN ring was remarkable, although the Ir–P and Ir–N bonds in the Ph₂Ppy-κP,κN ring were not elongated very much from the corresponding bonds in the Ph₂Pqn-κP,κN ring. In the pybim complex 5, the five-membered chelate ring was coplanar with the pyridine and benzimidazolyl rings. With the related (azido)iridium(III) complexes analyzed previously, comparison of the structural parameters of the Ir–N₃ moiety in [Cp∗Ir^III(N₃)(L–L′)]^+/0 complexes reveals an anomalous feature of the 2,2′-bipyridyl (bpy) complex, [Cp∗Ir(N₃)(bpy)]PF₆.     

Effect of ketimide ligand for ethylene polymerization and ethylene/norbornene copolymerization catalyzed by (cyclopentadienyl)(ketimide)titanium complexes-MAO catalyst systems: Structural analysis for CpTiCl2(NCPh2)

Ligand effects on the catalytic activity [and norbornene (NBE) incorporation] for both ethylene polymerization and ethylene/NBE copolymerization using half-titanocenes (titanium half-sandwich complexes) containing ketimide ligand of type Cp′TiCl₂[NC(R¹)R²] [Cp′ = Cp (1), C⁵Me⁵ (Cp^∗, 2); R¹,R² = ^tBu,^tBu (a), ^tBu,Ph (b), Ph,Ph (c)]-methylaluminoxane (MAO) catalyst systems have been investigated. CpTiCl₂[NC(^tBu)Ph] (1b) CpTiCl₂(NCPh₂) (1c), and Cp^∗TiCl₂(NCPh₂) (2c) were prepared and identified; the structure of Cp^∗TiCl₂(NCPh₂) (2c) was determined by X-ray crystallography. The catalytic activity for ethylene polymerization increased in the order: 1a > 1b > 1c, suggesting that an electronic nature of the ketimide ligand affects the activity. However, molecular weight distributions for resultant (co)polymers prepared by 1b,c and by 2c-MAO catalyst systems were bi- or multi-modal, suggesting that the ketimide substituent plays a key role in order for these (co)polymerizations to proceed with single catalytically-active species. CpTiCl₂(NC^tBu₂) (1a) exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization.     

Synthesis, characterization, and catalytic activities in syndiospecific polymerization of styrene for half-sandwich titanium complexes with non-Cp tridentate dianionic ligands MeN(CH2CR2O)2

New half-titanocenes, Cp^∗TiCl[(OCR₂CH₂)NMe(CH₂CR^′₂O)] [R,R′ = H (1), R,R′ = Me, H, (2), R,R′ = Me (3)], were prepared from Cp^∗TiCl₃ (4) with the corresponding alcohols in the presence of triethylamine. X-ray analysis shows that 1 has slightly distorted trigonal bipyramidal geometry around Ti. These complexes exhibited moderate catalytic activities for syndiospecific styrene polymerization in the presence of MAO and the activity increased in the order: 2 > 1 > 4 > 3 (at 50 °C), 1 > 2 > 4 > 3 (at 70 °C and 90 °C).     

Synthesis of new substituted cyclopentadienyl titanium monomethoxydifluorides with BF3 · OEt2 as fluorinating reagent and their use in syndiotactic polymerization of styrene

Five substituted cyclopentadienyl titanium trimethoxide complexes, RCpTi(OMe)₃ (R=Me (2b), ⁱPr (2c), Me₃Si (2d), allyl (2e), PhCH₂ (2f)), were prepared. By reacting RCpTi(OMe)₃ with BF₃OMe₂, six RCpTiF₂(OMe) (R=H (3a), Me (3b), ⁱPr (3c), Me₃Si (3d), allyl (3e), PhCH₂ (3f)) were obtained. When activated with methylaluminoxane (MAO), the activities of RCpTiF₂(OMe) system were less than those of RCpTi(OMe)₃ system in solution polymerization of styrene, but the polymers made by RCpTiF₂(OMe) exhibited higher Mw and melting point than those by RCpTi(OMe)₃. Both systems produced polymers with similar syndiotacticities in the range 92.4-97.6%. Introduction of a substituent group into the Cp-ligand enhanced the melting points of the polymers, and meanwhile decreased the catalytic activities of RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems, where the order of activity was RCp=Cp > MeCp > ⁱPrCp > Me₃SiCp > CH₂CHCH₂Cp > PhCH₂Cp. Complexes 2a (CpTi(OMe)₃) and 3a showed the highest activities respectively for both systems, and are three to four times more active than CpTiCl₃. In bulk polymerization, the difference of activities between RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems became small, where complexes 2e and 3e exhibited remarkably higher activities compared with their solution polymerization activities. The maximum polymerization activities were found at the polymerization temperature of 50 °C for most of the complexes. The influence of the polymerization time (t_P), polymerization temperature (T_P) and Al/Ti ratio on the activities of complexes 2b and 3b were investigated. It was observed that the initial rate of propagation of complex 2b was higher than that of complex 3b and the highest activities of both catalysts were reached at the relatively low Al/Ti ratio of 150 and decrease for larger ratios.     

Electronic interactions in 1-ethynyl-2-phenyltetramethyldisilanes HCCSiMe2SiMe2C6H4X

1-Ethynyl-2-phenyltetramethyldisilanes HCCSiMe₂SiMe₂C₆H₄X [X = NMe₂ (1), H (2), CH₃ (3), Br (4), CF₃ (5)] are accessible from ClSiMe₂SiMe₂Cl, BrMgC₆H₄X and HCCMgBr in a two step Grignard reaction. The crystal structure of 1 as determined by single crystal X-ray crystallography exhibits a nearly planar PhNMe₂ moiety and an unusual gauche array of the phenyl and the acetylene group with respect to rotation around the Si-Si bond. Full geometry optimization (B3LYP/6-31+G^∗∗) of the gas phase structures of 1-5 affords minima for the gauche and the anti rotational isomers, both being very close in energy with a rotational barrier of only 3-5 kJ/mol. Experimental and calculated (time-dependent DFT B3LYP/TZVP) UV absorption data of 1-5 show pronounced electronic interactions of the HCC- and the C₆H₄X π-systems with the central Si-Si bond.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

Heterobimetallic complexes as oxygen donor bidentate ligands: synthesis of early-late trinuclear complexes

The early-late heterometallic complexes [TiCp^∗((OCH₂)₂Py)(μ-O)M(COD)] (M = Rh, Ir) behave as four-electron donor ligands yielding the polynuclear cationic complexes [TiCp^∗(OCH₂)₂ Py(μ-O){M(COD)}₂]OTf (M = Rh (1), Ir (2)). The molecular structure of complex 1 has been established through an X-ray diffraction study.     

Syntheses of new Mo(II) and W(II) mono(hydrosulfido) complexes and their conversion into di- and tetranuclear sulfido-bridged heterobimetallic complexes

Treatment of [Cp′MH(CO)₃] (M = Mo, W; Cp′ = η⁵-C₅H₅ (Cp), η⁵-C₅Me₅ (Cp*)) with 1/8 equiv of S₈ in THF, followed by the reaction with dppe under UV irradiation, gave new mono(hydrosulfido) complexes [Cp′M(SH)(CO)(dppe)] (Cp′ = Cp: M = Mo (5), W (6); Cp′ = Cp*: M = Mo (7), W (8); dppe = Ph₂PCH₂CH₂PPh₂). When 5 and 6 dissolved in THF were allowed to react with [RhCl(PPh₃)₃] in the presence of base, heterodinuclear complexes with bridging S and dppe ligands [CpM(CO)(μ-S)(μ-dppe)Rh(PPh₃)] (M = Mo (9), W(10)) were obtained. Semi-bridging feature of the CO ligands were also demonstrated. Upon standing in CH₂Cl₂ solutions, 9 and 10 were converted further to the dimerization products [(CpM)₂{Rh(dppe)}₂(μ₂-CO)₂(μ₃-S)₂] (M = Mo (13), W). Detailed structures of mononuclear 7 and 8, dinuclear 9 and tetranuclear 13 have been determined by the X-ray diffraction.     

Synthesis and characterization of heterometallic Rh/Ru complexes supported by 1,2-dichalcogenolato-o-carborane ligands

The 16-electron half-sandwich complexes Cp^∗Rh[E₂C₂(B₁₀H₁₀)] (E = S, 1a; Se, 1b) react with [Ru(COD)Cl₂]_x under different conditions to give different types of heterometallic complexes. When the reactions were carried out in THF for 24 h, the binuclear Rh/Ru complexes [Cp^∗Rh(μ-Cl)₂(COD)Ru][E₂C₂(B₁₀H₁₀)] (E = S, 2a; Se, 2b) bridged by two Cl atoms and the binuclear Rh/Rh complexes (Cp^∗Rh)₂[E₂C₂(B₁₀H₁₀)] (E = S, 3a; Se, 3b) with direct Rh-Rh bond can be isolated in moderate yields. [Ru(COD)Cl₂] fragments in 2a and 2b have inserted into the Rh-E bond. If the [Ru(COD)Cl₂]_x was reacted with 1a in the presence of K₂CO₃ in methanol solution, the product [Cp^∗Rh(COD)]Ru[S₂C₂(B₁₀H₁₀]] (4a), K[(μ-Cl)(μ-OCH₃)Ru(COD)]₄ (5a) and 3a were obtained. The B(3)-H activation in complex 4a was found. However, when the reaction between 1b and [Ru(COD)Cl₂]_x was carried out in excessive NaHCO₃, the carborane cage opened products {Cp^∗Rh[S₂C₂(B₉H₁₀)]}Ru(COD) (6b), {Cp^∗Rh[S₂C₂(B₉H₉)]}Ru(COD)(OCH₃) (7b) and 3b were obtained. All complexes were fully characterized by their IR, ¹H NMR and elemental analyses. The molecular structures of 2a, 2b, 3b, 4a, 5a, and 7b have been determined by X-ray crystallography.     

Novel octahedral nickel(II) dithiocarbamates with bi- or tetradentate N-donor ligands: X-ray structures of [Ni(Bzppzdtc)(phen)2]ClO4 · CHCl3 and [Ni(Bz2dtc)2(cyclam)]

A series of novel octahedral nickel(II) dithiocarbamate complexes involving bidentate nitrogen-donor ligands (phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine) or a tetradentate ligand (cyclam = 1,4,8,11-tetraazacycloteradecane) of the composition [Ni(BzMetdtc)(phen)₂]ClO₄ (1), [Ni(Pe₂dtc)(phen)₂]ClO₄ (2), [Ni(Bzppzdtc)(phen)₂]ClO₄ · CHCl₃ (3), [Ni(Bzppzdtc)(phen)₂](SCN) (4), [Ni(BzMetdtc)(bpy)₂]ClO₄ · 2H₂O (5), [Ni(Pe₂dtc)(cyclam)]ClO₄ (6), [Ni(BzMetdtc)₂(cyclam)] (7), [Ni(Bz₂dtc)₂(cyclam)] (8) and [Ni(Bz₂dtc)₂(phen)] (9) (BzMetdtc = N,N-benzyl-methyldithiocarbamate(1-) anion, Pe₂dtc = N,N-dipentyldithiocarbamate(1-) anion, Bz₂dtc = N,N-dibenzyldithiocarbamate(1-) anion, Bzppzdtc = 4-benzylpiperazinedithiocarbamate(1-) anion), have been synthesized. Spectroscopic (electronic and infrared), magnetic moment and molar conductivity data, and thermal behaviour of the complexes are discussed. Single crystal X-ray analysis of 3 and 8 confirmed a distorted octahedral arrangement in the vicinity of the nickel atom with a N₄S₂ donor set. They represent the first X-ray structures of such type complexes. The catalytic influence of complexes 2, 3, 6, and 7 on graphite oxidation was studied and discussed.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Synthesis and reactivity of rhodium(III) pentamethylcyclopentadienyl complexes of N-B-PTA(BH3): X-ray crystal structures of [CpRhCl2{N-B}-PTA(BH3)] and [CpRh{N-B-PTA(BH3)}(η-CH2 = CHPh)]

The reaction between 1-boranyl-1,3,5-triaza-7-phosphaadamantane ligand N-B-PTA(BH₃) and [Cp^∗RhCl(μ-Cl)]₂ affords [Cp^∗Rh{N-B-PTA(BH₃)}Cl₂] (3) or [Cp_∗Rh{N-B-PTA(BH₃)}₂Cl]Cl (5) containing one or two P-bonded boronated PTA ligands. The hydride [Cp_∗Rh{N-B-PTA(BH₃)}H₂] (8) was also obtained by reaction of 3 with NaBH₄ and alternatively by direct hydroboration of [Cp^∗Rh(PTA)Cl₂] with excess NaBH₄. Moderately slow hydrolysis of the N-boranyl rhodium complexes affords dihydrogen, H₃BO₃ and the corresponding PTA derivatives, including the water-soluble dihydride [Cp^∗Rh(PTA)H₂] (9). Finally, the reaction of 8 with electron poor alkynes gives the alkene complexes [Cp^∗Rh{N-B-PTA(BH₃)}(η²-CH₂ = CHR)] (R = Ph, 10; C(O)OEt, 11) as a mixture of rotamers η²-coordinated to rhodium without affecting the N-BH₃ moiety. The X-ray crystal structures of 3 and 10 were also obtained and are here discussed.     

Various silyl-substituted cyclopentadienyl titanium complexes [CpSi(CH3)2X]TiCl3 as catalysts for syndiotactic polystyrene

Three silyl-substituted titanium trichloride complexes [CpSi(CH₃)₂X]TiCl₃ [X=Cl(1), Me(2), PhOMe(3)] were tested as catalyst precursors for the syndiospecific polymerization of styrene. The catalytic activity increased in the order 1 > 2 > 3. The highest activity was 2.42 × 10⁷ g s-PS/mol Ti mol S h using complex 1/MAO catalytic system at molar ratio of Al/Ti=2000. The effects of variation on polymerization temperature and Al/Ti ratio on the polymerization of styrene were also studied.