Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Synthesis and characterization of scandium complexes with reduced ligands: Crystal structures of Cp∗ScI2, [Cp∗ScI(bpy)]2, and [Cp∗ScCl(bpy)]2

The synthesis and characterization of complexes containing a Cp∗Sc(R₂bpy) (Cp∗ = pentamethylcyclopentadienyl, bpy = 4,4′-R,R-2,2′-bipyridine, R = H, Me) motif are described. Cp∗ScI₂ (1) was prepared from Cp∗Sc(acac)₂ (acac = acetylacetonate) and AlI₃ (2 equiv) in pentane. Compound 1 reacted with bipyridine and 4,4′-dimethyl-2,2′-bipyridine (dmb) in benzene to yield Cp∗ScI₂(bpy) (3) and Cp∗ScI₂(dmb) (4), respectively. Compound 3 was reduced by alkali metal reductants such as Na/Hg, NaK₂, and K in aromatic solvents to yield [Cp∗ScI(bpy)]₂ (5). The chloride analog of 5, [Cp∗ScCl(bpy)]₂ (7), was prepared from Cp∗ScCl₂ by salt metathesis with Li₂(dme)₂bpy (6) (dme = dimethoxyethane) in toluene. Compounds 1, 5, and 7 have been structurally characterized. Analysis of the bond distances of the bipyridine ligands in 5 and 7, together with infrared and UV/vis spectroscopic data, suggest that the bipyridine ligands in these molecules exist as radical anions. The bipyridine ligands in 5 and 7 are arranged co-facially and are in close proximity (?3.30 Å), suggesting the presence of a π-π interaction.     

New diruthenium vinyliminium complexes from the insertion of alkynes into bridging aminocarbynes

Primary alkynes R′CCH [R′ = Me₃Si, Tol, CH₂OH, CO₂Me, (CH₂)₄CCH, Me] insert into the metal-carbon bond of diruthenium μ-aminocarbynes [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] [R = 2,6-Me₂C₆H₃ (Xyl), 1a; CH₂Ph (Bz), 1b; Me, 1c] to give the vinyliminium complexes [Ru₂{μ-η¹:η³-C(R′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] [R = Xyl, R′ = Me₃Si, 2a; R = Bz, R′ = Me₃Si, 2b; R = Me, R′ = Me₃Si, 2c; R = Xyl, R′ = Tol, 3a; R = Bz, R′ = Tol, 3b; R = Bz, R′ = CH₂OH, 4; R = Bz, R′ = CO₂Me, 5a; R = Me, R′ = CO₂Me, 5b; R = Xyl, R′ = (CH₂)₄CCH, 6; R = Xyl, R′ = Me, 7a; R = Bz, R′ = Me, 7b; R = Me, R′ = Me, 7c]. The related compound [Ru₂{μ-η¹:η³-C[C(Me)CH₂]CHCN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃], (9) is better prepared by reacting [Ru₂{μ-CN(Me)(Xyl)}(μ-CO)(CO)(Cl)(Cp)₂] (8) with AgSO₃CF₃ in the presence of HCCC(Me)CH₂ in CH₂Cl₂ at low temperature.In a similar way, also secondary alkynes can be inserted to give the new complexes [Ru₂{μ-η¹:η³-C(R′)C(R′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Bz, R′ = CO₂Me, 11; R = Xyl, R′ = Et, 12a; R = Bz, R′ = Et, 12b; R = Xyl, R′ = Me, 13). The reactions of 2-7, 9, 11-13 with hydrides (i.e., NaBH₄, NaH) have been also studied, affording μ-vinylalkylidene complexes [Ru₂{μ-η¹:η³-C(R′)C(R″)C(H)N(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Bz, R′ = Me₃Si, R″ = H, 14a; R = Me, R′ = Me₃Si, R″ = H, 14b; R = Bz, R′ = Tol, R″ = H, 15; R = Bz, R′ = R″ = Et, 16), bis-alkylidene complexes [Ru₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (R′ = Me₃Si, R″ = H, 17; R′ = R″ = Et, 18), acetylide compounds [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(CCR′)(Cp)₂] (R = Xyl, R′ = Tol, 19; R = Bz, R′ = Me₃Si, 20; R = Xyl, R′ = Me, 21) or the tetranuclear species [Ru₂{μ-η¹:η²-C(Me)CCN(Me)(Bz)}(μ-CO)(CO)(Cp)₂]₂ (23) depending on the properties of the hydride and the substituents on the complex. Chromatography of 21 on alumina results in its conversion into [Ru₂{μ-η³:η¹-C[N(Me)(Xyl)]C(H)CCH₂}(μ-CO)(CO)(Cp)₂] (22). The crystal structures of 2a[CF₃SO₃] · 0.5CH₂Cl₂, 12a[CF₃SO₃] and 22 have been determined by X-ray diffraction studies.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Synthesis, structure and characterization of dimolybdaheteroboranes

Chalcogen-stabilized dimolybdaboranes 3-5 (3: [(Cp^∗Mo)₂B₄H₅Se(Ph)], 4: [(Cp^∗Mo)₂B₄H₃Se₂(SeCH₂Ph)] and 5: [(Cp^∗Mo)₂B₃H₆(BSR)(μ-η¹-SR)] (R = 2,6-(^tBu)₂-C₆H₂OH)) have been isolated from the mild pyrolysis of dichalcogenide ligands, RE-E‘R (R = Ph: E = S, E‘ = Se; R = CH₂Ph, [2,6-(^tBu)₂-C₆H₂OH]: E = E‘ = Se, S) and [(Cp^∗Mo)₂B₄H₈], 2, an intermediate generated from the reaction of [Cp^∗MoCl₄] (1) (Cp^∗ = η⁵-C₅Me₅), with [LiBH₄.thf]. The geometry of [(Cp^∗Mo)₂B₄H₅Se(Ph)] is similar to that of [(Cp^∗Mo)₂B₅H₉], in which one BH₃ unit on the open face is replaced by a triple bridged selenium atom. All the compounds have been characterized in solution by ¹H, ¹¹B, ¹³C NMR and IR spectroscopy and elemental analysis. The structural types were unequivocally established by X-ray crystallographic analysis of compounds 3-5.     

Heterometallic complexes containing 1,1′-(CC)2Fc′ units linking two different metal centres

Proto-desilylation of 1-(Me₃SiCC)-1′-{Cp^∗(dppe)RuCC}Fc′ (1) afforded the corresponding ethynyl derivative 2, from which the green Co₂(μ-dppm)_n(CO)_8−2n (n = 0, 1) adducts 3 and 4 were obtained. Replacement of the ethynyl proton in reactions between 2 and AuCl(PPh₃), Hg(OAc)₂ or FeCl(dppe)Cp^∗ gave complexes 1-(RCC)-1′-{Cp^∗(dppe)RuCC}Fc′ [R = Au(PPh₃) 5, 1/2Hg 6, Fe(dppe)Cp^∗8]; the latter gave bis-vinylidene 9 with MeI, characterised (as was 2) by a single crystal X-ray study. Oxidative coupling of 2 (CuCl/tmeda/acetone, air) gave diyne 10, while coupling of 5 with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ afforded 1-{Cp^∗(dppe)RuCC}-1′-{(OC)₇(μ-dppm)Co₃(μ₃-CCC)}Fc′ (11). Cyclic voltammetric measurements indicated that there was no significant electronic coupling between the end-groups through the ferrocene centre in any of these compounds.     

Two coordination modes of TCNE in the ruthenium amidinates: The first example providing experimental evidence for κ-N to η-C rearrangement

Reactions of Cp^∗Ru(κ²-N(R)C(R′)NR) (1a; R = ⁱPr, R′ = Me, 1b; R = ^tBu, R′ = Ph) with TCNE initially give dark green colored intermediary species, which are readily converted to brown colored “η²-C” coordination complexes, Cp^∗Ru(κ²-N(R)C(R′)NR)(η²-TCNE) (3a; R = ⁱPr, R′ = Me, 3b; R = ^tBu, R′ = Ph). These “η²-C” complexes are characterized by spectroscopy and crystallography. A stable ruthenium amidinate having a “κ¹-N”-coordinated TCNE, Cp^∗Ru(κ²-N(^tBu)C(Mes)N^tBu)(κ¹(N)-TCNE) (2c), is synthesized by treatment of Cp^∗Ru(κ²-N(^tBu)C(Mes)N^tBu) (1c) with TCNE, the structure of which is unequivocally confirmed by X-ray structure determination and the charge transfer nature is supported by ESR analysis. Close analogy in IR and UV-Vis spectroscopy of 2c with the dark green colored intermediary species formed from 1b suggests that this is “κ¹-N” ruthenium amidinate, which is rearranged to the “η²-C” complex 3b.     

Chalcogen-capped ruthenium carbonyl clusters derived from diphosphazane mono- and dichalcogenides of the type X2P(E)N(R)PX2 and X2P(E)N(R)P(E)X2 (E = S or Se)

Reactions of Ru₃(CO)₁₂ with diphosphazane monoselenides Ph₂PN(R)P(Se)Ph₂ [R = (S)-∗CHMePh (L⁴), R = CHMe₂ (L⁵)] yield mainly the selenium bicapped tetraruthenium clusters [Ru₄(μ₄-Se)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] (1, 3). The selenium monocapped triruthenium cluster [Ru₃(μ₃-Se)(μ_sb-CO)(CO)₇{κ²-P,P-Ph₂PN((S)-∗CHMePh)PPh₂}] (2) is obtained only in the case of L⁴. An analogous reaction of the diphosphazane monosulfide (PhO)₂PN(Me)P(S)(OPh)₂ (L⁶) that bears a strong π-acceptor phosphorus shows a different reactivity pattern to yield the triruthenium clusters, [Ru₃(μ₃-S)(μ₃-CO)(CO)₇{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (9) (single sulfur transfer product) and [Ru₃(μ₃-S)₂(CO)₅{κ²-P,P-(PhO)₂PN(Me)P(OPh)₂}{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (10) (double sulfur transfer product). The reactions of diphosphazane dichalcogenides with Ru₃(CO)₁₂ yield the chalcogen bicapped tetraruthenium clusters [Ru₄(μ₄-E)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] [R = (S)-∗CHMePh, E = S (6); R = CHMe₂, E = S (7); R = CHMe₂, E = Se (3)]. Such a tetraruthenium cluster [Ru₄(μ₄-S)₂(μ- CO)(CO)₈{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (11) is also obtained in small quantities during crystallization of cluster 9. The dynamic behavior of cluster 10 in solution is probed by NMR studies. The structural data for clusters 7, 9, 10 and 11 are compared and discussed.     

Alkyne-functionalized metallocene complexes: Synthesis, structure, and catalytic ethylene polymerization

Reactions of phenylethynyl lithium with substituted cyclopentenones gave the corresponding pendant phenylethynyl substituted cyclopentadienes. Subsequent deprotonation and transmetallation with TiCl₄·2THF, ZrCl₄, and Cp^∗ZrCl₃ yielded the alkyne-functionalized metallocene complexes [C₅Me₄(CCPh)]₂MCl₂ [M = Ti (1), Zr (2)], Cp^∗[C₅Me₄(CCPh)]ZrCl₂ (3), and Cp^∗[C₅H₂R′₂(CCPh)]ZrCl₂ [R′ = Me (4), Ph (5)]. These complexes were fully characterized by ¹H NMR, ¹³C NMR, MS spectra, and elemental analysis. The molecular structure of 2 was determined by single crystal X-ray diffraction analysis. Ethylene polymerization was studied with these complexes in the presence of methylaluminoxane (MAO).     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Reactions of 2-pyridinethiolate cobalt(III) complexes with pyridinethiolate or benzenethiolate ligands

Four half-sandwich cobalt complexes, Cp^∗Co(2-PyS)₂ (2), Cp^∗Co(2-PyS)₂ · HI (3), Cp^∗Co(2-PyS) (4-PyS) (4), (Cp^∗Co)₂(μ-PhS)₂(μ-2-PyS)I (5) [Cp^∗ = pentamethylcyclopentadienyl, 2-PyS = 2-pyridinethiolate, 4-PyS = 4-pyridinethiolate, PhS = benzenethiolate] were successfully synthesized by the reactions of 2-pyridinethione, lithium 4-pyridinethiolate and lithium benzenethiolate with Cp^∗Co(2-PyS)I (1), respectively. Complexes 2 and 3 have the structures with two 2-pyridinethiolates ligands coordinated to the cobalt atom. Two different pyridinethiolates ligands can be identified in complex 4. The molecular structure of 5 consists of two Cp^∗-Co fragments, which are triply bridged by three sulfur atoms from different ligands. The molecular structures of 3 and 5 were determined by X-ray crystallographic analysis. All the complexes have been well characterized by elemental analysis, NMR and IR spectra.     

Allylpalladium (II) complexes with dichalcogenoimidodiphosphinate ligands: Synthesis, structure, spectroscopy and their transformation into palladium chalcogenides

The synthesis, characterization and thermal behavior of new monomeric allylpalladium (II) complexes with dichalcogenoamidodiphosphinate anions are reported. The complexes [R = H, R′ = Prⁱ, E = S (1a); R = H, R′ = Prⁱ, E = Se (1b); R = H, R′ = Ph, E = S (1c); R = H, R′ = Ph, E = Se (1d); R = Me, R′ = Prⁱ, E = S (2a); R = Me, R′ = Prⁱ, E = Se (2b); R = Me, R′ = Ph, E = S (2c); R = Me, R′ = Ph, E = Se (2d)] have been prepared by room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)] (acac = acetylacetonate) with dichalcogenoimidodiphosphinic acids in acetonitrile solution. The complexes have been characterized by multinuclear NMR (¹H, ¹³C{¹H}, ³¹P{¹H}, ⁷⁷Se{¹H}), FT-IR and elemental analyses. The crystal structures of complexes 1a, 1d and 2d have been reported and they consist of a six-membered PdE₂P₂N ring (E = S for 1a and Se for 1d and 2d) and an allyl group, C₃H₄R(R = H for 1a and 1d and Me for 2d). Thermogravimetric studies have been carried out for few representative complexes. The complexes thermally decompose in argon atmosphere to leave a residue of palladium chalcogenides, which have been characterized by PXRD, SEM and EDS.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of tungsten (R′O)2(ArN)WCH-SiR2-CHW(NAr)(OR′)2 (R = Me, Ph) and (R′O)2(ArN)WCH-SiMe2SiMe2-CHW(NAr)(OR′)2

Bimetallic alkylidene complexes of tungsten (R′O)₂(ArN)WCH-SiR₂-CHW(NAr)(OR′)₂ (R = Me (1), Ph (2)) and (R′O)₂(ArN)WCH-SiMe₂SiMe₂-CHW(NAr)(OR′)₂ (3) (Ar = ; R′ = CMe₂CF₃) have been prepared by the reactions of divinyl silicon reagents R₂Si(CHCH₂)₂ with known alkylidene compounds R′′-CHMo(NAr)(OR′)₂. (R′′ = Bu^t, PhMe₂C) Complexes 1-3 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1-3 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and 3 and predominant cis-units content in the case of 2.     

Zwitterionic diiron vinyliminium complexes: Alkylation, metalation and oxidative coupling at the S and Se functionalities

The zwitterionic vinyliminium complex [Fe₂{μ-η¹:η³-C(R′)C(S)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (2a) (R′ = p-Me-C₆H₄ (Tol), Xyl = 2,6-Me₂C₆H₃) undergoes electrophilic addition at the S atom by HSO₃CF₃, MeSO₃CF₃, SiMe₃Cl, BrCH₂Ph, ICH₂CHCH₂ affording the complexes [Fe₂{μ-η¹:η³-C(Tol)C(SX)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][Y] (X =  H, Y = SO₃CF₃, 4a; X = Me, Y = SO₃CF₃, 4b; X = SiMe₃, Y = Cl, 4c; X = CH₂Ph, Y = Br, 4d; X = CH₂CHCH₂, Y = I, 4e).Compound 2a and the corresponding vinyliminium complexes 2b and 2c (R′ = CH₂OH, 2b; R′ = Me, 2c) react also with etherated BF₃ leading to the formation of the corresponding S-adducts [Fe₂{μ-η¹:η³-C(R′)C(SBF₃)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (R′ = Tol, 5a; R′ = CH₂OH, 5b; R′ = Me, 5c).In analogous reactions, the zwitterionic vinyliminium complexes undergo S-metalation upon treatment with in situ generated [Fp]⁺[SO₃CF₃]⁻ [Fp = Fe(CO)₂(Cp)], leading to the formation of [Fe₂{μ-η¹:η³-C(R′)C(S-Fp)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃](R′ = CH₂OH, 6a; R′ = Me, 6b; R′ = Buⁿ, 6c).Similarly, zwitterionic vinyliminium containing Se in the place of S also undergo Se-electrophilic addition. Thus, the complexes [Fe₂{μ-η¹:η³-C(R′)C(SeX)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = X = Me, R′ = Tol, 7a; R = Xyl, R′ = Me, X = Fp⁺, 7b) are obtained upon treatment of the neutral zwitterionic precursors with MeSO₃CF₃ and [Fp][SO₃CF₃], respectively.Alkylation at the S or Se atom of the bridging ligand is also accomplished by CH₂Cl₂, used as solvent, although the reaction is slower compared to more efficient alkylating reagents. The complexes formed by this route are [Fe₂{μ-η¹:η³-C(R′)C(E-CH₂Cl)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][X] [E = S, R = Xyl, R′ = Tol, X = Cl, 8a; E = S, R = Xyl, R′ = Me, X = Cl, 8b; E = Se, R = R′ = Me, X = BPh₄, 8c].Finally, treatment of the zwitterionic vinyliminium complexes with I₂ results in the oxidative coupling with formation of S-S (disulfide) or Se-Se (diselenide) bond. The reactions, performed in the presence of NaBPh₄ afford the tetranuclear complexes [Fe₂{μ-η¹:η³-C(R′)C(E)CN(Me)(R)}(μ-CO)(CO)(Cp)₂]₂[BPh₄]₂ [R = Xyl, R′ = CH₂OH, E = S, 9a; R = Xyl, R′ = Me, E = S, 9b; R = Xyl, R′ = Buⁿ, E = S, 9c; R = Xyl, R′ = Me, E = Se, 9d; R = Me, R′ = Buⁿ, E = Se, 9e].The molecular structures of 4a, 8c and 9e have been determined by X-ray diffraction studies.     

Hydride addition at μ-vinyliminium ligand obtained from disubstituted alkynes

New μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = R″ = Me, 3a; R = Me, R′ = R″ = Et, 3b; R = Me, R′ = R″ = Ph, 3c; R = CH₂Ph, R′ = R″ = Me, 3d; R = CH₂Ph, R′ = R″ = COOMe, 3e; R = CH₂ Ph, R′ = SiMe₃, R″ = Me, 3f) have been obtained b yreacting the corresponding vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2a-f) with NaBH₄. The formation of 3a-f occurs via selective hydride addition at the iminium carbon (C_α) of the precursors 2a-f. By contrast, the vinyliminium cis-[Fe₂{μ-η¹:η³-C_γ (R′) = C_β(R″)C_α = N(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R′ = R″ = COOMe, 4a; R′ = R″ = Me, 4b; R′ = Prⁿ, R″ = Me, 4c; Prⁿ = CH₂CH₂CH₃, Xyl = 2,6-Me₂C₆H₃) undergo H⁻ addition at the adjacent C_β, affording the bis-alkylidene complexes cis-[Fe₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (5a-c). The cis and trans isomers of [Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4d) react differently with NaBH₄: the former reacts at C_α yielding cis-[Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], 6a, whereas the hydride attack occurs at C_β of the latter, leading to the formation of the bis alkylidene trans-[Fe₂{μ-η¹:η²-C(Et)C(H)(Et)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (5d). The structure of 5d has been determined by an X-ray diffraction study. Other μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (R′ = R″ = Ph, 6b; R′ = R″ = Me, 6c) have been prepared, and the structure of 6c has been determined by X-ray diffraction. Compound 6b results from treatment of cis-[Fe₂{μ-η¹:η³-C_γ(Ph)C_β(Ph)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4e) with NaBH₄, whereas 6c has been obtained by reacting 4b with LiHBEt₃. Both cis-4d and trans-4d react with LiHBEt₃ affording cis-6a.     

Effect of ketimide ligand for ethylene polymerization and ethylene/norbornene copolymerization catalyzed by (cyclopentadienyl)(ketimide)titanium complexes-MAO catalyst systems: Structural analysis for CpTiCl2(NCPh2)

Ligand effects on the catalytic activity [and norbornene (NBE) incorporation] for both ethylene polymerization and ethylene/NBE copolymerization using half-titanocenes (titanium half-sandwich complexes) containing ketimide ligand of type Cp′TiCl₂[NC(R¹)R²] [Cp′ = Cp (1), C⁵Me⁵ (Cp^∗, 2); R¹,R² = ^tBu,^tBu (a), ^tBu,Ph (b), Ph,Ph (c)]-methylaluminoxane (MAO) catalyst systems have been investigated. CpTiCl₂[NC(^tBu)Ph] (1b) CpTiCl₂(NCPh₂) (1c), and Cp^∗TiCl₂(NCPh₂) (2c) were prepared and identified; the structure of Cp^∗TiCl₂(NCPh₂) (2c) was determined by X-ray crystallography. The catalytic activity for ethylene polymerization increased in the order: 1a > 1b > 1c, suggesting that an electronic nature of the ketimide ligand affects the activity. However, molecular weight distributions for resultant (co)polymers prepared by 1b,c and by 2c-MAO catalyst systems were bi- or multi-modal, suggesting that the ketimide substituent plays a key role in order for these (co)polymerizations to proceed with single catalytically-active species. CpTiCl₂(NC^tBu₂) (1a) exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization.     

Monomeric and dimeric ruthenium thiooxalate complexes: Structures of CpRu(PPh3)2SCOCO2Me and CpRu(dppe)SCOCO2Et

The hydrosulfido complexes CpRu(L)(L′)SH react with one equivalent of O-alkyl oxalyl chlorides (ROCOCOCl) to form the corresponding O-alkylthiooxalate complexes CpRu(L)(L′)SCOCO₂R (L = L′ = PPh₃ (1), (2); L = PPh₃, L′ = CO (3); R = Me (a), Et (b)). The reactions of the hydrosulfido complexes with half equivalent of oxalyl chloride produce the bimetallic complexes [CpRu(L)(L′)SCO]₂ (L = L′ = PPh₃ (4), (5); L = PPh₃, L′ = CO (6)). The crystal structures of CpRu(PPh₃)₂SCOCO₂Me (1a) and CpRu(dppe)SCOCO₂Et (2b) are reported.     

Nitrile ligands activation in dinuclear aminocarbyne complexes

The diiron complexes [Fe(Cp)(CO){μ-η²:η²-C[N(Me)(R)]NC(C₆H₃R′)CCH(Tol)}Fe(Cp)(CO)] (R = Xyl, R′ = H, 3a; R = Xyl, R′ = Br, 3b; R = Xyl, R′ = OMe, 3c; R = Xyl, R′ = CO₂Me, 3d; R = Xyl, R′ = CF₃, 3e; R = Me, R′ = H, 3f; R = Me, R′ = CF₃, 3g) are obtained in good yields from the reaction of [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(p-NCC₆H₄R′)(Cp)₂]⁺ (R = Xyl, R′ = H, 2a; R = Xyl, R′ = Br, 2b; R = Xyl, R′ = OMe, 2c; R = Xyl, R′ = CO₂Me, 2d; R = Xyl, R′ = CF₃, 2e; R = Me, R′ = H, 2f; R = Me, R′ = CF₃, 2g) with TolCCLi. The formation of 3 involves addition of the acetylide at the coordinated nitrile and C-N coupling with the bridging aminocarbyne together with orthometallation of the p-substituted aromatic ring and breaking of the Fe-Fe bond. Complexes 3a-e which contain the N(Me)(Xyl) group exist in solution as mixtures of the E-trans and Z-trans isomers, whereas the compounds 3f,g, which posses an exocyclic NMe₂ group, exist only in the Z-cis form. The crystal structures of Z-trans-3b, E-trans-3c, Z-trans-3e and Z-cis-3g have been determined by X-ray diffraction experiments.