Determination of chain transfer constant to dodecanethiol in styrene/methyl methacrylate and butyl acrylate/methyl methacrylate copolymerization and effect of chain length on composition and stereochemical configuration of copolymers

Free radical copolymerization of styrene/methyl methacrylate (S/MMA) and butyl acrylate/methyl methacrylate (BA/MMA) in the presence of n-dodecanthiol (DDT) has been studied at 60°C in a 3 mol/L benzene solution using 2,2′-azobis(isobutyronitrile) (AIBN) as initiator. Overall chain transfer constant to DDT has been determined for both copolymerization systems, as a function of monomer feed composition using complete molecular weight distribution and the Mayo method. Overall transfer coefficients have values which are dependent on both monomer feed composition and individual comonomer transfer values. Composition, sequence distribution, and stereoregularity of copolymers obtained are, in our experimental conditions, independent of copolymer molecular weight. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2913–2925, 1998     

Atom transfer radical copolymerization of n‐hexylmaleimide and styrene in an ionic liquid

Dendritic polyarylether 2‐bromoisobutyrates of different generations (Gn‐Br, n = 1–3) as macroinitiators for the atom transfer radical copolymerization of N‐hexylmaleimide and styrene in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate, were investigated. The copolymerization carried out in the ionic liquid with CuBr/pentamethyldiethylenetriamine as a catalyst at room temperature afforded polymers with well‐defined molecular weights and low polydispersities (1.18 < M_w/M_n < 1.36, where M_w is the weight‐average molecular weight and M_n is the number‐average molecular weight), and the resultant copolymers possessed an alternating structure over a wide range of monomer feeds (f₁ = 0.3–0.8). Meanwhile, the copolymerization was also conducted in anisole at 110 °C under similar conditions so that the effect of the reaction media on the polymerization could be evaluated. The monomer reactivity ratios showed that the tendency to form alternating copolymers for the two monomers was stronger in ionic liquids than in anisole. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3360–3366, 2002     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002     

Low- and high-conversion studies of the free radical copolymerization of 2-hydroxyethyl methacrylate with styrene in N,N′-dimethylformamide solution

2-Hydroxyethyl methacrylate (HEMA) and styrene (S) have been copolymerized in a 3 mol · L⁻¹N,N′-dimethylformamide (DMF) solution using 2,2′azobis (isobutyronitrile) (AIBN) as an initiator over a wide composition and conversion range. From low-conversion experiments and ¹H-NMR analysis, the monomer reactivity ratios were determined according to the Mayo–Lewis terminal model. The comparison of the obtained results with those previously reported for copolymerization in bulk and in toluene reveals a relatively small but noticeable solvent effect that can be qualitatively explained by the bootstrap model. Cumulative copolymer composition as a function of conversion is satisfactorily described by the integrated Mayo–Lewis equation; overall copolymerization rate increases with increasing the HEMA/S ratio, and individual monomer conversion is closely related to the monomer molar fraction in the feed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2941–2948, 1999     

Synthesis and characterization of sulfonated block copolymers by atom transfer radical polymerization

Well‐defined sulfonated polystyrene and block copolymers with n‐butyl acrylate (nBA) were synthesized by CuBr catalyzed living radical polymerization. Neopentyl p‐styrene sulfonate (NSS) was polymerized with ethyl‐2‐bromopropionate initiator and CuBr catalyst with N,N,N′,N′‐pentamethylethyleneamine to give poly(NSS) (PNSS) with a narrow molecular weight distribution (MWD < 1.12). PNSS was then acidified by thermolysis resulting in a polystyrene backbone with 100% sulfonic acid groups. Random copolymers of NSS and styrene with various composition ratios were also synthesized by copolymerization of NSS and styrene with different feed ratios (MWD < 1.11). Well defined block copolymers with nBA were synthesized by sequential polymerization of NSS from a poly(n‐butyl acrylate) (PnBA) precursor using CuBr catalyzed living radical polymerization (MWD < 1.29). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5991–5998, 2008     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Nitroxide‐mediated free‐radical copolymerization of styrene with butyl acrylate

Controlled free‐radical copolymerization of styrene (S) and butyl acrylate (BA) was achieved by using a second‐generation nitroxide, N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (DEPN), and 2,2‐azobisisobutyronitrile (AIBN) at 120 °C. The time‐conversion first‐order plot was linear, and the number‐average molecular weight increased in direct proportion to the ratio of monomer conversion to the initial concentration, providing copolymers with low polydispersity. The monomer reactivity ratios obtained were r_S = 0.74 and r_BA = 0.29, respectively. To analyze the convenience of applying the Mayo–Lewis terminal model, the cumulative copolymer composition against conversion and the individual conversion of each monomer as a function of copolymerization time were studied. The theoretical values of the propagating radical concentration ratio were also examined to investigate the copolymerization rate behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4168–4176, 2004     

Free‐radical copolymerization of ethyl α‐hydroxymethylacrylate with methyl methacrylate by reversible addition–fragmentation chain transfer

The controlled free‐radical homopolymerization of ethyl α‐hydroxymethylacrylate and copolymerization with methyl methacrylate were performed in chlorobenzene at 70 °C by the reversible addition–fragmentation chain transfer polymerization technique with 2,2′‐azobisisobutyronitrile as the initiator. 2‐Phenylprop‐2‐yl dithiobenzoate and 2‐cyanoprop‐2‐yl dithiobenzoate were used as chain‐transfer agents in the homopolymerization, whereas only the former was used in the copolymerization. All reactions presented pseudolinear kinetics. The effect of the monomer feed ratio on the copolymerization kinetics was examined. The conversion level decreased when the proportion of ethyl α‐hydroxymethylacrylate in the monomer feed was larger. Kinetic studies indicated that the radical polymerizations proceeded with apparent living character according to experiments, demonstrating an increase in the molar mass with the monomer conversion and a relatively narrow molar mass distribution. All copolymers were statistical in chain structure, as confirmed by determinations of the monomer reactivity ratios. The monomer reactivity ratios were determined, and the Mayo–Lewis terminal model provided excellent predictions for the variations of the intermolecular structure over the entire conversion range. Additionally, the chemical modification of poly(ethyl α‐hydroxymethylacrylate) was carried out to introduce glucose pendant groups into the structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5618–5629, 2006     

Complex‐radical terpolymerization of acceptor–donor–acceptor systems: Maleic anhydride (n‐butyl methacrylate)–styrene–acrylonitrile

Some features of radical ternary copolymerization of maleic anhydride (MA)–styrene (St)–acrylonitrile (AN) and n‐butyl methacrylate (BMA)–St–AN acceptor–donor–acceptor monomer systems have been revealed. The terpolymer compositions and kinetics of copolymerizations were studied in the initial and high conversion stages. The considerable divergence in the copolymer compositions was observed when a strong acceptor MA monomer was substituted with BMA having comparatively low acceptor character in the ternary system studied. Obtained results show that terpolymerization proceeded mainly through “complex” mechanism in the state of near binary copolymerization of St…MA (or BMA) and AN…St complexes only in the chosen ratios of complexed monomers. The terpolymers synthesized have high thermal stabilities (295–325 °C), which is explained by possible intermolecular fragmentation of AN‐units through cyclization and crosslinking reactions during thermotreatment in the isothermal heating conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2652–2662, 2000     

Preparation of amphiphilic statistical copolymers of 2‐hydroxyethyl methacrylate with 2‐diethylaminoethyl methacrylate,precursors of water‐soluble copolymers

Statistical copolymers of 2‐hydroxyethyl methacrylate (HEMA) and 2‐diethylaminoethyl methacrylate (DEA) were synthesized at 50 °C by free‐radical copolymerization in bulk and in a 3 mol L^?1 N,N′‐dimethylformamide solution with 2,2′‐azobisisobutyronitrile as an initiator. The solvent effect on the apparent monomer reactivity ratios was attributed to the different aggregation states of HEMA monomer in the different solvents. The copolymers obtained were water‐insoluble at a neutral pH but soluble in an acidic medium when the molar fraction of the DEA content was higher than 0.5. The quaternization of DEA residues increased the hydrophilic character of the copolymers, and they became water‐soluble at a neutral pH when the HEMA content was lower than 0.25. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2427–2434, 2002     

Reversible addition–fragmentation transfer (RAFT) copolymerization of methyl methacrylate and styrene in miniemulsion

In the reversible addition–fragmentation transfer (RAFT) copolymerization of two monomers, even with the simple terminal model, there are two kinds of macroradical and two kinds of polymeric RAFT agent with different R groups. Because the structure of the R group could exert a significant influence on the RAFT process, RAFT copolymerization may behave differently from RAFT homopolymerization. The RAFT copolymerization of methyl methacrylate (MMA) and styrene (St) in miniemulsion was investigated. The performance of the RAFT copolymerization of MMA/St in miniemulsion was found to be dependent on the feed monomer compositions. When St is dominant in the feed monomer composition, RAFT copolymerization is well controlled in the whole range of monomer conversion. However, when MMA is dominant, RAFT copolymerization may be, in some cases, out of control in the late stage of copolymerization, and characterized by a fast increase in the polydispersity index (PDI). The RAFT process was found to have little influence on composition evolution during copolymerization. The synthesis of the well‐defined gradient copolymers and poly[St‐b‐(St‐co‐MMA)] block copolymer by RAFT miniemulsion copolymerization was also demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6248–6258, 2004     

Metal‐catalyzed living radical graft copolymerization of olefins initiated from the structural defects of poly(vinyl chloride)

Commercial poly(vinyl chloride) (PVC) contains allyl chloride and tertiary chloride groups as structural defects. This article reports the use of the active chloride groups from the structural defects of PVC as initiators for the metal‐catalyzed living radical graft copolymerization of PVC. The following monomers were investigated in graft copolymerization experiments: methyl methacrylate, butyl methacrylate, tert‐butyl methacrylate, butyl acrylate, methacrylonitrile, acrylonitrile, styrene, 4‐chloro‐styrene, 4‐methyl‐styrene, and isobornylmethacrylate. Cu(0)/bpy, CuCl/bpy, CuBr/bpy, Cu₂O/bpy, Cu₂S/bpy, and Cu₂Se/bpy (where bpy = 2,2′‐bipyridine) were used as catalysts. Living radical polymerizations initiated from 1‐chloro‐3‐methyl‐2‐butene, allyl bromide, and 1,4‐dichloro‐2‐butene as models for the allyl chloride structural defects and from 3‐chloro‐3‐methyl‐pentane and 1,3‐dichloro‐3‐methylbutane as models for the tertiary chloride defects were studied. Graft copolymerization experiments were accessible in solution, in a swollen state, and in bulk. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1120–1135, 2001     

Synthesis of well‐defined macromonomers and comb copolymers from polymers made by atom transfer radical polymerization

Poly(n‐butyl acrylate) macromonomers with predetermined molecular weights (1300 < number‐average molecular weight < 23,000) and low polydispersity indices (<1.2) were synthesized from bromine‐terminated atom transfer radical polymerization polymers via end‐group substitution with acrylic acid and methacrylic acid. These macromonomers, having a high degree of end‐group functionalization (>90%), were radically homopolymerized to obtain comb polymers. A high macromonomer concentration, combined with a low radical flux, was needed to obtain a high conversion of the macromonomers and a reasonable degree of polymerization. By the traditional radical copolymerization of the hydrophobic macromonomers with the hydrophilic monomer N,N‐dimethylaminoethyl methacrylate (DMAEMA), amphiphilic comb copolymers were obtained. The conversions of the macromonomers and comonomer were almost quantitative under optimized reaction conditions. The molecular weights were high (number‐average molecular weight ≈70,000), and the molecular weight distribution was broad (polydispersity index ≈ 3.5). Kinetic measurements showed simultaneous decreases in the macromonomer and DMAEMA concentrations, indicating a relatively homogeneous composition of the comb copolymers over the whole molecular weight range. This was supported by preparative size exclusion chromatography. The copolymerization of poly(n‐butyl acrylate) macromonomers with other hydrophilic monomers such as acrylic acid or N,N‐dimethylacrylamide gave comb copolymers with multimodal molecular weight distributions in size exclusion chromatography and extremely high apparent molecular weights. Dynamic light scattering showed a heterogeneous composition consisting of small (6–9 nm) and large (23–143 nm) particles, probably micelles or other type of aggregates. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3425–3439, 2003     

Synthesis and characterization of well‐defined poly(2‐hydroxyethyl methacrylate‐co‐styrene)‐graft‐poly(ε‐caprolactone) by sequential controlled polymerization

A new graft copolymer, poly(2‐hydroxyethyl methacrylate‐co‐styrene) ‐graft‐poly(?‐caprolactone), was prepared by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with coordination‐insertion ring‐opening polymerization (ROP). The copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) was carried out at 60 °C in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDTB) using AIBN as initiator. The molecular weight of poly (2‐hydroxyethyl methacrylate‐co‐styrene) [poly(HEMA‐co‐St)] increased with the monomer conversion, and the molecular weight distribution was in the range of 1.09 ～ 1.39. The ring‐opening polymerization (ROP) of ?‐caprolactone was then initiated by the hydroxyl groups of the poly(HEMA‐co‐St) precursors in the presence of stannous octoate (Sn(Oct)₂). GPC and ¹H‐NMR data demonstrated the polymerization courses are under control, and nearly all hydroxyl groups took part in the initiation. The efficiency of grafting was very high. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5523–5529, 2004     

Design and property of thermoresponsive core–shell fluorescent nanoparticles via RAFT polymerization and suzuki coupling reaction

The polymerization of a 2,7‐dibromocarbazole‐containing functional monomer, 6‐(2,7‐dibromo‐9H‐carbazol‐9‐yl)hexyl methacrylate (DBCzMA), was successfully carried out via the reversible addition‐fragmentation chain transfer (RAFT) technology. The polymerization behavior possessed the feature of “living”/controlled radical polymerization, for example, the first‐order kinetics, the linear increase of the molecular weight of the polymer with the monomer conversion and relatively narrow molecular weight distribution (M_w/M_n ≤ 1.27). The amphiphilic copolymers, poly(DBCzMA_m‐b‐NIPAM_n), with different chain length of poly(DBCzMA) and poly(N‐isopropylacrylamide) (PNIPAM), were successfully prepared via RAFT chain‐extension reaction, using poly(DBCzMA) as the macromolecular chain transfer agent (macro‐CTA) and NIPAM as the second monomer. Modification of 2,7‐dibromide groups in amphiphilic copolymer poly(DBCzMA‐b‐NIPAM) via Suzuki coupling reaction employed 2,7‐bis(4′,4′,5′,5′‐tetramethyl‐1′,3′,2′‐dioxaborolan‐2′‐yl)‐N?9″‐heptadecanylcarbazole as the other reaction material to afford a poly(2,7‐carbazole)‐containing crosslinked materials. The stable and uniform core–shell fluorescent nanoparticles were successfully prepared in water. The formed fluorescent nanoparticles showed good thermoresponsive properties, which is confirmed by dynamic light scattering observation. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4021–4030     

Free‐radical copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate studied by 1H NMR kinetic experiments

The free‐radical copolymerization of m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate (TMI) and styrene was studied with ¹H NMR kinetic experiments at 70 °C. Monomer conversion vs time data were used to determine the ratio k_p × k_t^?0.5 for various comonomer mixture compositions (where k_p is the propagation rate coefficient and k_t is the termination rate coefficient). The ratio k_p × k_t^?0.5 varied from 25.9 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for pure styrene to 2.03 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for 73 mol % TMI, indicating a significant decrease in the rate of polymerization with increasing TMI content in the reaction mixture. Traces of the individual monomer conversion versus time were used to map out the comonomer mixture composition drift up to overall monomer conversions of 35%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed was observed. This depletion became more pronounced at higher levels of TMI in the initial comonomer mixture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1064–1074, 2002     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

Synthesis and characterization of poly[styrene‐b‐methyl(3,3,3‐trifluoropropyl)siloxane] diblock copolymers via anionic polymerization

A series of narrow molecular weight distribution (MWD) polystyrene‐b‐poly[methyl(3,3,3‐trifluoropropyl)siloxane] (PS‐b‐PMTFPS) diblock copolymers were synthesized by the sequential anionic polymerization of styrene and trans‐1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane in tetrahydrofuran (THF) with n‐butyllithium as the initiator. The diblock copolymers had narrow MWDs ranging from 1.06 to 1.20 and number‐average molecular weights ranging from 8.2 × 10³ to 37.1 × 10³. To investigate the properties of the copolymers, diblock copolymers with different weight fractions of poly[methyl(3,3,3‐trifluoropropyl)siloxane] (15.4–78.8 wt %) were prepared. The compositions of the diblock copolymers were calculated from the characteristic proton integrals of ¹H NMR spectra. For the anionic ring‐opening polymerization (ROP) of 1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane (F₃) initiated by polystyryllithium, high monomer concentrations could give high polymer yields and good control of MWDs when THF was used as the polymerization solvent. It was speculated that good control of the block copolymerization under the condition of high monomer concentrations was due to the slowdown of the anionic ROP rate of F₃ and the steric hindrance of the polystyrene precursors. There was enough time to terminate the ROP of F₃ when the polymer yield was high, and good control of block copolymerization could be achieved thereafter. The thermal properties (differential scanning calorimetry and thermogravimetric analysis) were also investigated for the PS‐b‐PMTFPS diblock copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4431–4438, 2005