Preparation and characterization of CoFe2O4/TiO2 magnetic composite films

CoFe₂O₄/TiO₂ magnetic composite films were prepared using the sol-gel method with tetrabutyltitanate and metallic chlorates as starting materials. The effects of heat treatment temperatures on microstructures and on magnetic properties were studied. The microstructure and properties of the samples at different heat treatment temperatures were characterized by X-ray diffraction, Raman spectrum, scanning electron microscopy, polarized microscopy and vibrating sample magnetometry. The results show that crystals of different substances grow up independently. Cobalt ferrite is evenly embedded into the titanium dioxide matrix in the prepared composite films. The magnetism of the composite films is enhanced with an increase of the heat temperature. Supported by the National Natural Science Foundation of China (Grant Nos. 50632030 and 10474077), and the Natural Science Foundation of Shaanxi Province (Grant No. 2006E135)     

Preparation and characterization of CoFe2O4/TiO2 magnetic composite films

CoFe₂O₄/TiO₂ magnetic composite films were prepared using the sol-gel method with tetrabutyltitanate and metallic chlorates as starting materials. The effects of heat treatment temperatures on microstructures and on magnetic properties were studied. The microstructure and properties of the samples at different heat treatment temperatures were characterized by X-ray diffraction, Raman spectrum, scanning electron microscopy, polarized microscopy and vibrating sample magnetometry. The results show that crystals of different substances grow up independently. Cobalt ferrite is evenly embedded into the titanium dioxide matrix in the prepared composite films. The magnetism of the composite films is enhanced with an increase of the heat temperature.     

基片温度对LiCoO2薄膜结构与电化学性能的影响

采用射频(RF)磁控溅射技术制备了用于全固态薄膜锂电池的非晶态和多晶LiCoO2阴极薄膜,利用XRD和SEM研究了沉积温度对LiCoO2薄膜结构和形貌的影响,并研究了高温退火后薄膜的电化学性能.研究结果表明,随著基片温度的不同,薄膜成分、表面形貌以及电化学行为有明显差异.室温沉积的薄膜很难消除薄膜中Li2CO3的影响,经过高温退火处理后也无法形成有效的多晶LiCoO2薄膜,而150℃沉积的薄膜经过高温退火后形成了有利于锂离子嵌入的多晶LiCoO2结构,薄膜显示出了较好的电化学性能.     

TiO2纳米管阵列负载不同形貌Cu2O薄膜的制备及光电性能研究

本论文采用阳极氧化法在金属钛基底上制备高度有序的TiO2纳米管阵列薄膜,然后采用脉冲电流法在TiO2纳米管阵列上沉积Cu2O,从而制备出Cu2O-TiO2纳米管阵列异质结复合薄膜。借助X射线衍射仪(XRD),场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)等表征手段,详细探讨了Cu2O沉积过程中电解液的不同扰动方式(静止、磁力搅拌和超声搅拌)对复合薄膜物相和形貌的影响。实验结果表明电解液的扰动方式会影响Cu2O沉积过程中的离子扩散和微区化学环境,从而影响Cu2O的形貌。通过漫反射紫外-可见吸收光谱(UV-Vis)和光电流性能测试可知所制备的负载Cu2O型TiO2纳米管阵列薄膜具有显著的可见光响应效应。     

Preparation and characterization of chiral polyacrylates end‐capped with bornyl groups in the side chains

Chiral polyacrylates with bornyl end‐capped side chains with four kinds of mesogenic moieties (azobenzene, biphenyl, benzoyloxy biphenyl, and phenyl benzoate) were prepared. The phase properties of the polymers were investigated with X‐ray diffraction, differential scanning calorimetry, and polarizing optical microscopy. The thermogravimetric characteristics, the glass‐transition temperatures and weight‐average molecular weights, of the homopolymers were evaluated. The optical properties of the synthesized polymers in diluted solutions and in the thin‐film state were also evaluated. The optical behavior of the composite films upon photoirradiation was investigated through the change in the transmittance of the probe light triggered by ultraviolet (365‐nm) irradiation. Ultraviolet irradiation and heat treatment caused a reversible intensity change of the probe light at λ = 400 nm. The shrinkage of the photoisomerization of the composite films was also investigated with atomic force microscopy. A spot contraction appeared on the surface when it was irradiated with a laser light spot. The contraction was recovered by heat treatment at 80 °C for 10 min. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1075–1092, 2004     

Preparation and Characterizations of TiO2/Organically Modified Silane Composite Materials Produced by the Sol-Gel Method

TiO₂/organically modified silane (ORMOSIL) composite materials produced by the sol-gel method were studied for optical waveguide applications. High optical quality waveguiding films on different substrates, including silicon, gallium arsenide, silica/silicon substrates, and microscope glass slides, were prepared from high titanium content (0.2 molar) ÿ-glycidoxypropyltrimethoxysilane at low temperature. Scanning electron microscopy (SEM), atomic force microscopy (AFM), differential thermal analysis (DTA), thermal gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) have been used to investigate the optical and structural properties of the composite films. The TGA/DTA results showed that the organic compounds in the film would tend to decompose in the temperature range from 200°C to 500°C. SEM and AFM results showed that a dense and porous-free composite material film could be obtained at the heat treatment temperature of 100°C. It was also shown that ORMOSIL is integrated in the glass, providing low shrinkage and high cracking resistance. The propagation loss properties of the composite films were also investigated. About 1.1 dB/cm propagation loss of the planar waveguide film was obtained at the wavelength of 633 nm.     

中空TiO_2微球的制备及对聚丙烯酸酯薄膜性能的影响

采用阳离子聚苯乙烯微球作为模板,钛酸四丁酯为钛源,氨水为催化剂,制备了中空TiO_2微球.采用X射线衍射、扫描电镜及比表面测定仪对其形貌和结构进行了表征,并考察了模板粒径、钛源用量以及催化剂用量对中空TiO_2微球形貌的影响.通过物理共混法将其引入至聚丙烯酸酯乳液中并成膜,研究了复合薄膜的保温性能、抗紫外性能及力学性能.结果表明,锐钛矿相中空TiO_2微球模板粒径、钛源用量以及催化剂用量影响中空TiO_2微球的空心尺寸、壁厚及壳层致密性.中空TiO_2微球可显著提升聚丙烯酸酯薄膜的保温性能、抗紫外性能和力学性能.采用不同粒径的模板制备的中空TiO_2微球对复合薄膜的各项性能均有影响,其中模板粒径为140 nm时复合薄膜性能最优,光反射率提升63%,导热系数降低27%,且在波长小于360 nm范围内,紫外透过率几乎为0,抗张强度增加100%,断裂伸长率提升62%.     

Magnetostatic Coupling in CoFe2O4/Pb(Zr0.53Ti0.47)O3 Magnetoelectric Composite Thin Films of 2-2 Type Structure

CoFe₂O₄/Pb(Zr_0.53Ti_0.47)O₃ (CFO/PZT) magnetoelectric composite thin films of 2-2 type structure had been prepared onto Pt/Ti/SiO₂/Si substrate by a sol-gel process and spin coat-ing technique. The structure of the prepared thin film is substrate/PZT/CFO/PZT/CFO. Two CFO ferromagnetic layers are separated from each other by a thin PZT layer. The upper CFO layer is magnetostatically coupled with the lower CFO layer. Subsequent scan-ning electron microscopy (SEM) investigations show that the prepared thin films exhibit good morphologies and compact structure, and cross-sectional micrographs clearly display a multilayered nanostructure of multilayered thin films. The composite thin films exhibit both good magnetic and ferroelectric properties. The spacing between ferromagnetic layers can be varied by adjusting the thickness of intermediate PZT layer. It is found that the strength of magnetostatic coupling has a great impact on magnetoelectric properties of composite thin films, i.e., the magnetoelectric voltage coefficient of composite thin film tends to increase with the decreasing of pacing between two neighboring CFO ferromagnetic layers as a result of magnetostatic coupling effect.     

复合方式对MWCNTs/TiO2纳米复合薄膜光电化学性能的影响

采用溶胶-凝胶法制备了不同复合方式的系列多壁碳纳米管(multi-walled carbon nanotubes, MWCNTs)/TiO2纳米复合薄膜电极. 通过SEM表征了薄膜的表面形貌, 并测定了MWCNTs引入前后对TiO2晶型结构和光吸收性能的影响以及不同复合方式的纳米复合薄膜的光电化学特性. 结果表明, MWCNTs/TiO2纳米复合薄膜表面形成无序多孔的形貌, 其光谱吸收边可拓展到可见光区; MWCNTs底层分布的纳米复合薄膜比纯TiO2表现出更好的光电活性, 而MWCNTs在表层分布及均匀分布的纳米复合薄膜的光电活性相对较差. 依据载流子分离原理探讨了不同复合方式对纳米复合薄膜光电性能的影响, 底层分布MWCNTs的纳米复合薄膜由于MWCNTs有效地收集传递电子并阻止载流子的复合从而提高了光电化学活性.     

纳米TiO_2改性蚕丝丝素蛋白膜的研究

用溶胶凝胶法制备纳米TiO2改性再生蚕丝丝素蛋白膜.该丝素膜机械强度提高,在水中溶失率下降.UV、AFM、SEM测试的结果表明,丝素中纳米TiO2粒径约为80 nm,纳米粒子在丝素膜中分布均匀;XRD、FTIR测试结果表明,纳米TiO2的加入,可使改性丝素膜的结晶结构从SilkⅠ向SilkⅡ转化,其结晶度也随之提高;TGA测试表明改性丝素膜的热转变温度比纯丝素膜有所改变.     

CuInS2：两步电沉积制备及性能

采用恒电位沉积法制备铜铟合金预制膜,并存管式炉中通过固态源蒸发硫化预制膜得到CuInS:薄膜.通过扫描电镜(SEM)、能量色散谱仪(EDS)和X射线衍射仪(XRD)对CuInS2薄膜的表而形貌、截面厚度、成分组成和薄膜的组织结构进行了研究,并利用紫外可见光吸收谱仪(UV-Vis)研究了不同硫化温度对CuInS:薄膜的形貌及其光学吸收性质的影响.结果表明:不同的退火温度能够影响CuInS:薄膜的表面形貌以及带隙的大小,从而影响其光学吸收特性.     

微弧氧化法制备WO_3/TiO_2复合薄膜的结构及光催化性能

采用微弧氧化工艺分别在钨酸盐和磷酸盐电解液中制备了WO_3/TiO_2复合薄膜和单一的TiO_2膜(P-TiO_2),利用X射线衍射、扫描电子显微镜、紫外-可见光谱和荧光光谱对这两种膜层的结构及光物理特性进行了表征.结果表明,P-TiO_2膜由锐钛矿与金红石混合相组成,而WO_3/TiO_2膜中除锐钛矿与金红石混合相外,还含有W0O相.两种膜层表面粗糙多孔,WO_3/TiO_2膜的孔洞数量更多,分布更均匀.WO_3/TiO_2膜的光吸收范围较P-TiO_2膜略宽,但后者在紫外光区的光吸收性能更好.WO_3O/TiO_2膜的荧光发光强度比P-TiO_2的小,光生电子-空穴之间的分离效果好.与P-TiO_2膜相比,WO_3/TiO_2膜的表面酸度高,吸附有机物和羟基的能力更强.紫外光下照射2 h,WO_3/TiO_2能够降解85%罗丹明,而P-TiO_2膜只能降解23%.WO_3/Ti0_2膜的高光催化活性源于它较高的比表面积、较优的电子.空穴分离效果和较高的表面酸度.     

以LiCoO2为阴极的全固态薄膜锂电池的研究

Amorphous and oriented polycrystalline LiCoO2 thin films, used as cathode material for an all-solid-state thin film battery, were fabricated by using RF magnetron sputtering and annealed at different temperatures. The morphology and structure of LiCoO2 thin films were characterized by scanning electron microscopy and X-ray diffraction. All-solid-state thin film batteries, comprised of LiCoO2 cathode films with different structures, lithium phosphorous oxynitride electrolyte film and metallic lithium anode film, was successfully prepared and their properties were examined by chronopotentiometry. Results showed that the structure and crystallinity of the LiCoO2 films strongly influenced the electrochemical performance of all-solid-state thin film lithium batteries. Worth nothing was the battery with an oriented polycrystalline LiCoO2 film it exhibited the best electrochemical performance, and delivered a discharge capacity of ～55.4 μAh/cm2μm. Furthermore, when subjected to over 450 charge/discharge cycles, that battery suffered no obvious fode in capacity.     

Structure and photochromic properties of molybdenumphosphoric acid/TiO_2 composite films

TiO_2 sol-gel composite films with dropping molybdenumphosphoric acid(PMoA) have been prepared by sol-gel method.The structure and constitute of composite thin films were studied with Fourier transforms infrared spectroscopy(FT-IR),atomic force microscopy(AFM),and X-ray diffraction(XRD) patterns,respectively.The photochromic behavior and mechanism of composite thin films were inves-tigated with ultraviolet-visible spectra(UV-vis) and electron spin resonance(ESR).FT-IR results showed that the Keggin geometry...     

The effect of heat treatment in the reducing atmosphere on the physical properties of TiO2 thin films prepared by sol–gel method

Multilayered nanostructured TiO₂ thin films were prepared by sol–gel and dipping deposition on quartz substrate followed by thermal treatment under reducing atmosphere (20 %H₂–80 %Ar). Heat treatment at progressively higher temperatures caused structural, morphological, and optical changes, which were investigated by X-ray diffraction (XRD), atomic force microscopy, scanning electron microscopy, and UV–Vis spectroscopy. The conductivities of the thin films were also measured by 4-point probe method. The XRD results showed that the calcined TiO₂ thin films consist of single anatase phase which was completely transformed into rutile phase after heat treatment at 1,000 °C. The grains of films grew by intra-agglomerate densification after heat treatment at higher temperatures. The root mean square roughness of the samples was found to be in the range of 0.58–3.36 nm. The partially reduced TiO₂ samples have red-shifted transmittance bands due to new energy band formed by oxygen vacancies. The electrical conductivity of the films was also enhanced after heat treatment in reducing atmosphere.     

Influence of O2 Plasma on Surface Properties of PC-TiO2 Nanocomposite Film

In this work, polycarbonate-TiO₂ nanocomposite films were prepared with different percentages. The aim was to consider the effect of O₂ LF plasma (50 Hz) on the hydrophilicity, surface energy, and surface morphology of polycarbonate and polycarbonate-TiO₂ nanocomposite. Structure of samples was determined by using X-ray diffraction analysis. In comparison with the reference sample, the samples’ structure did not change after plasma treatment. Surface properties of polycarbonate and polycarbonate-TiO₂ nanocomposite films were studied by X-ray photoelectron spectroscopy (XPS), contact angle measurement, atomic force microscopy (AFM), and Vickers microhardness tester. XPS analysis showed that the surface of samples became more oxidized due to plasma treatment. The water contact angle significantly decreased from 88° to 15° after plasma treatment. It was observed that the hardness of the nanocomposite films was not modified after plasma treatment.     

Fe2O3-TiO2磁性复合材料的制备及可见光催化性能

以FeCl₃和Ti(C₄H₉O)₄为前驱体, 通过复合溶胶法制备了Fe₂O₃-TiO₂磁性复合光催化剂, 并用 XPS, XRD, SEM, EDS及BET进行了表征. 对亚甲基蓝的降解实验证明, Fe₂O₃的引入将复合材料的光响应范围扩展至可见光区, 且掺杂的Fe₂O₃摩尔分数为1.0%时, 样品可见光催化性能最高. 磁强计的测试结果显示, 复合光催化剂具有一定的磁性, 可在反应结束后利用磁场从体系分离, 使催化剂得到回收再利用.     

溶胶-凝胶法制备纳米TiO2/丝素复合膜及结构性能研究

用溶胶凝胶法制备不同比例纳米TiO₂改性再生蚕丝丝素蛋白复合膜. UV和AFM测试结果表明, 该丝素膜中纳米TiO₂均匀分散在丝素中, TiO₂粒径约为80 nm; 同时该丝素膜的结构和热性能用FTIR, XRD, EDS, TGA和DTG进行表征. XRD测试结果表明, 随着纳米TiO₂的加入, 复合丝素膜的结晶结构从Silk I向Silk II转化, 但当纳米TiO₂的加入超过一定量时, 又破坏复合丝素膜的结晶结构; FTIR和EDS测试结果表明, TiO₂与丝素形成较好的键合; TGA和DTG测试表明复合丝素膜的热转变温度相比于纯丝素膜有所提高.     

TiO_2/SiO_2纳米薄膜的光催化活性和亲水性

通过 sol-gel工艺在钠钙玻璃表面制备了均匀透明的 TiO2/SiO2复合纳米薄膜 .实验结果表明 : 当 SiO2添加量较高时 , TiO2/SiO2复合纳米薄膜的光催化活性明显降低 ;当 SiO2添加量较低时 ,TiO2/SiO2复合薄膜的光催化活性无明显变化 .在 TiO2薄膜中添加 SiO2,可以抑制薄膜中 TiO2晶粒的长大 ,同时薄膜表面的羟基含量增加 , 水在复合薄膜表面的润湿角下降 , 亲水能力增强 .当 SiO2含量为 10％－ 20％（摩尔分数）时获得了润湿角为 0°的超亲水性薄膜 .     

Structure and photochromic properties of molybdenumphosphoric acid/TiO<Subscript>2</Subscript> composite films

TiO₂ sol-gel composite films with dropping molybdenumphosphoric acid (PMoA) have been prepared by sol-gel method. The structure and constitute of composite thin films were studied with Fourier transforms infrared spectroscopy (FT-IR) atomic force microscopy (AFM), and X-ray diffraction (XRD) patterns, respectively. The photochromic behavior and mechanism of composite thin films were investigated with ultraviolet-visible spectra (UV-vis) and electron spin resonance (ESR). FT-IR results showed that the Keggin geometry of PMoA was still preserved inside PMoA/TiO₂ composite thin films, and a charge transfer bridge was built at the interface of PMoA and TiO₂ through the Mo-O-Ti bond. Surface topography of the composite film showed obvious changes before/after adding PMoA, and the surface topography of composite films showed obvious changes before/after irradiating as well. Composite thin film had reversible photochromic properties. Irradiated with UV light, transparent films changed from colorless to blue and they can bleach completely with ambient air in the dark. ESR results showed that TiO₂ were excitated by UV light to produce electrons, which deoxidized PMoA to produce heteropolyblues. The photochromic process of PMoA/TiO₂ system was carried through electron transfer mechanism.