分散液液微萃取技术及其在生物样品分析中的研究进展

分散液液微萃取是一种新型微萃取技术,具有易操作、低成本、耗时短、环境友好、萃取效率高等优点。该文着眼于分散液液微萃取技术中萃取剂的性质及辅助分散方式,综述了常规分散液液微萃取、离子液体分散液液微萃取、超声辅助分散液液微萃取等多种萃取模式,并重点归纳总结了近5年分散液液微萃取技术在生物样品分析领域的应用进展。     

离子液体在样品预处理中的应用

离子液体具有一些独特的物理和化学性质,作为一种可设计的绿色溶剂被应用于液液萃取、液相微萃取、固相微萃取和膜分离等样品预处理技术中。本文综述了离子液体在样品预处理中应用的研究进展。     

Determination of rifaximin in rat serum by ionic liquid based dispersive liquid-liquid microextraction combined with RP-HPLC

An efficient and environmental friendly ionic liquid based dispersive liquid-liquid microextraction procedure was optimized for determination of rifaximin in rat serum by reverse phase high-performance liquid chromatography. The effect of ionic liquids, dispersive solvents, extractant/disperser ratio, and salt concentrations on sample recovery and enrichment factors were studied. Among the five ionic liquids studied in the present investigation, 1-butyl-3-methylimidazolium hexafluorophosphate was found to be most effective for extraction of rifaximin. The recovery was found to be more than 98% using 1-butyl-3-methylimidazolium hexafluorophosphate and methanol as extraction and dispersive solvents, at an extractant/disperser ratio of 0.43. The recovery was further enhanced to 99.5% by the addition of 5.0% NaCl solution. A threefold enhancement in detection limit was achieved when compared to protein precipitation. The ionic liquid containing the extracted rifaximin was directly injected into HPLC system. The linear relationship was observed in the range of 0.03-10.0 μg/mL with the correlation coefficient (r(2) ) 0.9998. Limits of detection and quantification were found to be 0.01 and 0.03 μg/mL, respectively. The relative standard deviation was 2.5%. The method was validated and applied to study pharmacokinetics of rifaxmin in rat serum.     

Chromatographic and spectroscopic methods for the determination of solvent properties of room temperature ionic liquids

Room temperature ionic liquids are novel solvents with favorable environmental and technical features. Synthetic routes to over 200 room temperature ionic liquids are known but for most ionic liquids physicochemical data are generally lacking or incomplete. Chromatographic and spectroscopic methods afford suitable tools for the study of solvation properties under conditions that approximate infinite dilution. Gas-liquid chromatography is suitable for the determination of gas-liquid partition coefficients and activity coefficients as well as thermodynamic constants derived from either of these parameters and their variation with temperature. The solvation parameter model can be used to define the contribution from individual intermolecular interactions to the gas-liquid partition coefficient. Application of chemometric procedures to a large database of system constants for ionic liquids indicates their unique solvent properties: low cohesion for ionic liquids with weakly associated ions compared with non-ionic liquids of similar polarity; greater hydrogen-bond basicity than typical polar non-ionic solvents; and a range of dipolarity/polarizability that encompasses the same range as occupied by the most polar non-ionic liquids. These properties can be crudely related to ion structures but further work is required to develop a comprehensive approach for the design of ionic liquids for specific applications. Data for liquid-liquid partition coefficients is scarce by comparison with gas-liquid partition coefficients. Preliminary studies indicate the possibility of using the solvation parameter model for interpretation of liquid-liquid partition coefficients determined by shake-flask procedures as well as the feasibility of using liquid-liquid chromatography for the convenient and rapid determination of liquid-liquid partition coefficients. Spectroscopic measurements of solvatochromic and fluorescent probe molecules in room temperature ionic liquids provide insights into solvent intermolecular interactions although interpretation of the different and generally uncorrelated "polarity" scales is sometimes ambiguous. All evidence points to the ionic liquids as a unique class of polar solvents suitable for technical development. In terms of designer solvents, however, further work is needed to fill the gaps in our knowledge of the relationship between ion structures and physicochemical properties.     

Development of deep eutectic solvents applied in extraction and separation

Deep eutectic solvents, as an alternative to ionic liquids, have greener credentials than ionic liquids, and have attracted considerable attention in related chemical research. Deep eutectic solvents have attracted increasing attention in chemistry for the extraction and separation of various target compounds from natural products. This review highlights the preparation of deep eutectic solvents, unique properties of deep eutectic solvents, and synthesis of deep‐eutectic‐solvent‐based materials. On the other hand, application in the extraction and separation of deep eutectic solvents is also included in this report. In this paper, the available data and references in this field are reviewed to summarize the applications and developments of deep eutectic solvents. Based on the development of deep eutectic solvents, an exploitation of new deep eutectic solvents and deep eutectic solvents‐based materials is expected to diversify into extraction and separation.     

Task-specific microextractions using ionic liquids

Ionic liquids (ILs) have been the focus of many scientific investigations including the field of analytical microextractions. ILs have many advantages over traditional organic solvents making them excellent candidates as extraction media for a variety of microextraction techniques. Many physical properties of ILs can be varied, and the structural design and make-up can be tuned to impart desired functionality for enhancement of analyte extraction selectivity, efficiency, and sensitivity. This paper provides a brief overview of ionic liquids and highlights trends in three important sample-preparation techniques, namely, single drop microextraction, solid-phase microextraction, and dispersive liquid–liquid microextraction in terms of performing task-specific extractions using these highly versatile solvents.     

Liquid phase microextraction of pesticides: a review on current methods

Liquid phase microextraction (LPME) enables analytes to be extracted with a few microliters of an organic solvent. LPME is a technique for sample preparation that is extremely simple, affordable and virtually a solvent-free. It can provide a high degree of selectivity and enrichment by eliminating carry-over between single runs. A variety of solvents are known for the extraction of the various analytes. These features have led to the development of techniques such as single drop microextraction, hollow fiber LPME, dispersive liquid-liquid microextraction, and others. LPME techniques have been applied to the analysis of pharmaceuticals, food, beverages, and pesticides. This review covers the history of LPME methods, and then gives a comprehensive collection of their application to the preconcentration and determination of pesticides in various matrices. Specific sections cover (a) sample treatment techniques in general, (b) single-drop microextraction, (c) extraction based on the use of ionic liquids, (d) solidified floating organic drop microextraction, and various other techniques. Contains 149 references.

Ionic liquid foam floatation coupled with ionic liquid dispersive liquid–liquid microextraction for the separation and determination of estrogens in water samples by high‐performance liquid chromatography with fluorescence detection

An ionic liquid foam floatation coupled with ionic liquid dispersive liquid–liquid microextraction method was proposed for the extraction and concentration of 17‐α‐estradiol, 17‐β‐estradiol‐benzoate, and quinestrol in environmental water samples by high‐performance liquid chromatography with fluorescence detection. 1‐Hexyl‐3‐methylimidazolium tetrafluoroborate was applied as foaming agent in the foam flotation process and dispersive solvent in microextraction. The introduction of the ion‐pairing and salting‐out agent NH₄PF₆ was beneficial to the improvement of recoveries for the hydrophobic ionic liquid phase and analytes. Parameters of the proposed method including concentration of 1‐hexyl‐3‐methylimidazolium tetrafluoroborate, flow rate of carrier gas, floatation time, types and concentration of ionic liquids, salt concentration in samples, extraction time, and centrifugation time were evaluated. The recoveries were between 98 and 105% with relative standard deviations lower than 7% for lake water and well water samples. The isolation of the target compounds from the water was found to be efficient, and the enrichment factors ranged from 4445 to 4632. This developing method is free of volatile organic solvents compared with regular extraction. Based on the unique properties of ionic liquids, the application of foam floatation, and dispersive liquid–liquid microextraction was widened.     

金属检测中新型前处理技术研究进展及应用

精准检测环境和食品中金属含量对环境保护和人体健康至关重要.样品的准备环节是造成样品损失和二次污染的关键步骤, 因此合适的前处理方法可以提高金属分析的选择性和灵敏度.从液相萃取和非液相萃取新技术两方面综述了浊点萃取、离子液体、超分子溶剂-分散液液微萃取、顶空固相微萃取技术、超临界流体萃取特点及在复杂样品前处理中的应用和研究进展, 并对其未来发展方向进行了展望.     

Bioanalytical separation and preconcentration using ionic liquids

Ionic liquids (ILs) are novel solvents that display a number of unique properties, such as negligible vapor pressure, thermal stability (even at high temperatures), favorable viscosity, and miscibility with water and organic solvents. These properties make them attractive alternatives to environmentally unfriendly solvents that produce volatile organic compounds. In this article, a critical review of state-of-the-art developments in the use of ILs for the separation and preconcentration of bioanalytes in biological samples is presented. Special attention is paid to the determination of various organic and inorganic analytes—including contaminants (e.g., pesticides, nicotine, opioids, gold, arsenic, lead, etc.) and functional biomolecules (e.g., testosterone, vitamin B₁₂, hemoglobin)—in urine, blood, saliva, hair, and nail samples. A brief introduction to modern microextraction techniques based on ILs, such as dispersive liquid–liquid microextraction (DLLME) and single-drop microextraction (SDME), is provided. A comparison of IL-based methods in terms of their limits of detection and environmental compatibilities is also made. Finally, critical issues and challenges that have arisen from the use of ILs in separation and preconcentration techniques are also discussed.

Application of new approaches to liquid-phase microextraction for the determination of emerging pollutants

Liquid-liquid extraction (LLE) has been widely used as a pre-treatment technique for separation and preconcentration of organic analytes from aqueous samples. Nevertheless, this technique has several drawbacks, mainly in the use of large volumes of solvents, making LLE an expensive, environmentally-unfriendly technique.Miniaturized methodologies [e.g., liquid-phase microextraction (LPME)] have arisen in the search for alternatives to conventional LLE, using negligible volumes of extracting solvents and reducing the number of steps in the procedure. Developments have led to different approaches to LPME, namely single-drop microextraction (SDME), hollow-fiber LPME (HF-LPME), dispersive liquid-liquid microextraction (DLLME) and solidified floating organic drop microextraction (SFODME).This overview focuses on the application of these microextraction techniques to the analysis of emerging pollutants.     

Extraction of organic compounds with room temperature ionic liquids

Room temperature ionic liquids are novel solvents with a rather specific blend of physical and solution properties that makes them of interest for applications in separation science. They are good solvents for a wide range of compounds in which they behave as polar solvents. Their physical properties of note that distinguish them from conventional organic solvents are a negligible vapor pressure, high thermal stability, and relatively high viscosity. They can form biphasic systems with water or low polarity organic solvents and gases suitable for use in liquid–liquid and gas–liquid partition systems. An analysis of partition coefficients for varied compounds in these systems allows characterization of solvent selectivity using the solvation parameter model, which together with spectroscopic studies of solvent effects on probe substances, results in a detailed picture of solvent behavior. These studies indicate that the solution properties of ionic liquids are similar to those of polar organic solvents. Practical applications of ionic liquids in sample preparation include extractive distillation, aqueous biphasic systems, liquid–liquid extraction, liquid-phase microextraction, supported liquid membrane extraction, matrix solvents for headspace analysis, and micellar extraction. The specific advantages and limitations of ionic liquids in these studies is discussed with a view to defining future uses and the need not to neglect the identification of new room temperature ionic liquids with physical and solution properties tailored to the needs of specific sample preparation techniques. The defining feature of the special nature of ionic liquids is not their solution or physical properties viewed separately but their unique combinations when taken together compared with traditional organic solvents.     

A naked-eye colorimetric sensor for chloroform

A phenoxazine based sensor molecule shows fast response (within 5 s) to halogenated solvents, especially chloroform via obvious color change under 365 nm UV light irradiation.     

基于轻质萃取剂的溶剂去乳化分散液-液微萃取-气相色谱法测定水样中多环芳烃

以密度小于水的轻质溶剂为萃取剂,建立了无需离心步骤的溶剂去乳化分散液-液微萃取-气相色谱(SD-DLLME-GC)测定水样中多环芳烃的新方法。传统分散液-液微萃取技术一般采用密度大于水的有机溶剂为萃取剂,并需要通过离心步骤促进分相。而本方法以密度比水小的轻质溶剂甲苯为萃取剂,将其与丙酮(分散剂)混合并快速注入水样,获得雾化体系;然后注入乙腈作为去乳化剂,破坏该雾化体系,无需离心,溶液立即澄清、分相;取上层有机相(甲苯)进行GC分析。考察了萃取剂、分散剂、去乳化剂的种类及其体积等因素对萃取率的影响。以40 μL甲苯为萃取剂,500 μL丙酮为分散剂,800 μL乙腈为去乳化剂,方法在20～500 μg/L范围内呈现出良好的线性(r2=0.9942～0.9999),多环芳烃的检出限(S/N=3)为0.52～5.11 μg/L。用所建立的方法平行测定5份质量浓度为40 μg/L的多环芳烃标准水样,其含量的相对标准偏差为2.2%～13.6%。本法已成功用于实际水样中多环芳烃的分析,并测得其加标回收率为80.2%～115.1%。     

Dispersive liquid-liquid microextraction based on solidification of floating organic droplet method for the determination of diethofencarb and pyrimethanil in aqueous samples

A dispersive liquid-liquid microextraction method was developed for the determination of fungicides (diethofencarb and pyrimethanil) in aqueous samples. It is based on the use of solidified floating organic drops combined with high-performance liquid chromatography. Extraction solvent and dispersive solvent, extraction time and salt effect were optimized. Under optimized conditions, the enrichment factors for a 5?mL water sample are between 145 and 161. The limits of detection for diethofencarb and pyrimethanil are 0.24 and 0.09???g ? L^?1, respectively. The method offers good repeatability and high recovery. Compared with dispersive liquid-liquid microextraction, it has a higher enrichment factor, high precision due to the ease with which the solidified floating phase is transferred, thus avoiding the loss of analyte. Toxic solvents were replaced by 1-dodecanol with its much lower toxicity. The method has been successfully applied to the determination of the two fungicides in tap water, lake water, and river water.     

Determination of triclosan by cuvetteless UV–vis micro-spectrophotometry following simultaneous ultrasound assisted emulsification–microextraction with derivatization: Use of a micellar-ionic liquid as extractant

Two ultrasound-assisted emulsification–microextraction procedures based on the use of a micellar ionic liquid as extractant are proposed for triclosan determination in troublesome matrices such as cosmetics and wastewaters. Microvolume UV–vis spectrophotometry was used in order to quantify the yellow azoderivative formed. This compound is polar and water-soluble and hence, it is not extractable into conventional organic solvents. Two imidazolium based ionic liquids were used as extractants. An improvement in the extraction of the derivative was achieved when SDS was mixed with the ionic liquid. The use of ultrasound energy allows a fast emulsification of the system. All the parameters related to the emulsification–microextraction were carefully optimized (i.e., ionic liquid type and volume, SDS concentration, sonication time and amplitude, salt addition, disperser solvent, cooling of ionic liquid and centrifugation time). Matrix effects were assessed and external calibration was used in all cases. Several advantages such as high sample throughput, simplicity and low reagent consumption can be emphasized.     

Recent trends in replacement of disperser solvent in dispersive liquid-liquid microextraction methods

Since its innovation in 2006, the dispersive liquid-liquid microextraction (DLLME) method has attracted the attention of analytical chemists in the field of sample preparation. This method has been successfully applied to determine trace amounts of pollutants in various matrices, but the restriction in the choice of suitable disperser and extraction solvents, and high disperser solvent consumption leading to decreased partition coefficients of the analytes between aqueous phase and extractant are its problems. To solve these drawbacks and develop environmentally friendly techniques, various alternatives for the conventional DLLME have been presented. The current review will begin with an introduction to the sample preparation, implementation of DLLME, and its advantages. Then, we focus on its drawbacks, which result mainly from the use of disperser solvent. Afterward, some of the most interesting approaches that have been employed and published until now are reviewed. Finally, an outlook on the future of these techniques will be given.     

Ionic Liquids Beyond Simple Solvents: Glimpses at the State of the Art in Organic Chemistry

Within the last 25 years ionic liquids have written a tremendous success story, which is documented in a nearly uncountable amount of original research papers, reviews, and numerous applications in research and industry. These days, ionic liquids can be considered as a mature class of compounds for many different applications. Frequently, they are used as neoteric solvents for chemical tansformations, and the number of reviews on this field of research is huge. In this focused review, though, we are trying to evaluate the state of the art of ionic liquid chemistry beyond using them simply as solvents for chemical transformations. It is not meant to be a comprehensive overview on the topic; the choice of emphasis and examples rather refects the authors’ personal view on the field. We are especially highlighting fields in which we believe the most fundamental developments within the next five years will take place: biomass processing, (chiral) ionic liquids from natural sources, biotransformations, and organic synthesis.     

Characterizing ionic liquids on the basis of multiple solvation interactions

Room-temperature ionic liquids (RTILs) are useful in many chemical applications. Recent publications have attempted to determine the polarity of RTILs using empirical solvent polarity scales. The results have indicated that most RTILs have similar polarities. Nevertheless, RTILs are capable of behaving quite differently when used as solvents in organic synthesis, matrixes in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry, liquid-liquid extraction, and as stationary phases in gas chromatography. The work presented in this study uses a linear free energy approach to characterize 17 RTILs on the basis of their distinct multiple solvation interactions with probe solute molecules. This model provides data that can be used to help identify the interactions and properties that are important for specific chemical applications.     

离子液体中二羰基化合物的烷基化反应

为取代传统的有机溶剂，离子液体将为现代化学溶剂提供一种新颖而环境友好的选择，以1－丁基吡啶四氟硼酸盐为离子液体，实现了1，3－二羰基化合物的烷基化反应，提供了一种既方便又实用的操作方法。