Tailoring A Poly(ether sulfone) Bipolar Membrane: Osmotic‐Energy Generator with High Power Density

Osmotic energy, obtained through different concentrations of salt solutions, is recognized as a form of a sustainable energy source. In the past years, membranes derived from asymmetric aromatic compounds have attracted attention because of their low cost and high performance in osmotic energy conversion. The membrane formation process, charging state, functional groups, membrane thickness, and the ion‐exchange capacity of the membrane could affect the power generation performance. Among asymmetric membranes, a bipolar membrane could largely promote the ion transport. Here, two polymers with the same poly(ether sulfone) main chain but opposite charges were synthesized to prepare bipolar membranes by a nonsolvent‐induced phase separation (NIPS) and spin‐coating (SC) method. The maximum power density of the bipolar membrane reaches about 6.2 W m^?2 under a 50‐fold salinity gradient, and this result can serve as a reference for the design of bipolar membranes for osmotic energy conversion systems.     

Tailoring A Poly(ether sulfone) Bipolar Membrane: Osmotic-Energy Generator with High Power Density

Osmotic energy, obtained through different concentrations of salt solutions, is recognized as a form of a sustainable energy source. In the past years, membranes derived from asymmetric aromatic compounds have attracted attention because of their low cost and high performance in osmotic energy conversion. The membrane formation process, charging state, functional groups, membrane thickness, and the ion-exchange capacity of the membrane could affect the power generation performance. Among asymmetric membranes, a bipolar membrane could largely promote the ion transport. Here, two polymers with the same poly(ether sulfone) main chain but opposite charges were synthesized to prepare bipolar membranes by a nonsolvent-induced phase separation (NIPS) and spin-coating (SC) method. The maximum power density of the bipolar membrane reaches about 6.2 W m⁻² under a 50-fold salinity gradient, and this result can serve as a reference for the design of bipolar membranes for osmotic energy conversion systems.     

The Combination of 2D Layered Graphene Oxide and 3D Porous Cellulose Heterogeneous Membranes for Nanofluidic Osmotic Power Generation

Salinity gradient energy, as a type of blue energy, is a promising sustainable energy source. Its energy conversion efficiency is significantly determined by the selective membranes. Recently, nanofluidic membrane made by two-dimensional (2D) nanomaterials (e.g., graphene) with densely packed nanochannels has been considered as a high-efficient membrane in the osmotic power generation research field. Herein, the graphene oxide-cellulose acetate (GO–CA) heterogeneous membrane was assembled by combining a porous CA membrane and a layered GO membrane; the combination of 2D nanochannels and 3D porous structures make it show high surface-charge-governed property and excellent ion transport stability, resulting in an efficient osmotic power harvesting. A power density of about 0.13 W/m² is achieved for the sea–river mimicking system and up to 0.55 W/m² at a 500-fold salinity gradient. With different functions, the CA and GO membranes served as ion storage layer and ion selection layer, respectively. The GO–CA heterogeneous membrane open a promising avenue for fabrication of porous and layered platform for wide potential applications, such as sustainable power generation, water purification, and seawater desalination.     

Laser-Assisted Scalable Pore Fabrication in Graphene Membranes for Blue-Energy Generation

The osmotic energy from a salinity gradient (i. e. blue energy) is identified as a promising non-intermittent renewable energy source for a sustainable technology. However, this membrane-based technology is facing major limitations for large-scale viability, primarily due to the poor membrane performance. An atomically thin 2D nanoporous material with high surface charge density resolves the bottleneck and leads to a new class of membrane material the salinity gradient energy. Although 2D nanoporous membranes show extremely high performance in terms of energy generation through the single pore, the fabrication and technical challenges such as ion concentration polarization make the nanoporous membrane a non-viable solution. On the other hand, the mesoporous and micro porous structures in the 2D membrane result in improved energy generation with very low fabrication complexity. In the present work, we report femtosecond (fs) laser-assisted scalable fabrication of μm to mm size pores on Graphene membrane for blue energy generation for the first time. A remarkable osmotic power in the order of μW has been achieved using mm size pores, which is about six orders of magnitudes higher compared to nanoporous membranes, which is mainly due to the diffusion-osmosis driven large ionic flux. Our work paves the way towards fs laser-assisted scalable pore creation in the 2D membrane for large-scale osmotic power generation.     

Oppositely Charged Ti3C2Tx MXene Membranes with 2D Nanofluidic Channels for Osmotic Energy Harvesting

Membrane‐based reverse electrodialysis (RED) is considered as the most promising technique to harvest osmotic energy. However, the traditional membranes are limited by high internal resistance and low efficiency, resulting in undesirable power densities. Herein, we report the combination of oppositely charged Ti₃C₂T_x MXene membranes (MXMs) with confined 2D nanofluidic channels as high‐performance osmotic power generators. The negatively or positively charged 2D MXene nanochannels exhibit typical surface‐charge‐governed ion transport and show excellent cation or anion selectivity. By mixing the artificial sea water (0.5 m NaCl) and river water (0.01 m NaCl), we obtain a maximum power density of ca. 4.6 Wm^?2, higher than most of the state‐of‐the‐art membrane‐based osmotic power generators, and very close to the commercialization benchmark (5 Wm^?2). Through connecting ten tandem MXM‐RED stacks, the output voltage can reach up 1.66 V, which can directly power the electronic devices.     

Efficient Solar-osmotic Power Generation from Bioinspired Anti-fouling 2D WS2 Composite Membranes

Nanofluidic reverse electrodialysis provides an attractive way to harvest osmotic energy. However, most attention was paid to monotonous membrane structure optimization to promote selective ion transport, while the role of external fields and relevant mechanisms are rarely explored. Here, we demonstrate a Kevlar-toughened tungsten disulfide (WS₂) composite membrane with bioinspired serosa-mimetic structures as an efficient osmotic energy generator coupling light. As a result, the output power could be up to 16.43 W m⁻² under irradiation, outperforming traditional two-dimensional (2D) membranes. Both the experiment and simulation uncover that the generated photothermal and photoelectronic effects could synergistically promote the confined ion transport process. In addition, this membrane also possesses great anti-fouling properties, endowing its practical application. This work paves new avenues for sustainable power generation by coupling solar energy.     

Miniaturized Salinity Gradient Energy Harvesting Devices

Harvesting salinity gradient energy, also known as “osmotic energy” or “blue energy”, generated from the free energy mixing of seawater and fresh river water provides a renewable and sustainable alternative for circumventing the recent upsurge in global energy consumption. The osmotic pressure resulting from mixing water streams with different salinities can be converted into electrical energy driven by a potential difference or ionic gradients. Reversed-electrodialysis (RED) has become more prominent among the conventional membrane-based separation methodologies due to its higher energy efficiency and lesser susceptibility to membrane fouling than pressure-retarded osmosis (PRO). However, the ion-exchange membranes used for RED systems often encounter limitations while adapting to a real-world system due to their limited pore sizes and internal resistance. The worldwide demand for clean energy production has reinvigorated the interest in salinity gradient energy conversion. In addition to the large energy conversion devices, the miniaturized devices used for powering a portable or wearable micro-device have attracted much attention. This review provides insights into developing miniaturized salinity gradient energy harvesting devices and recent advances in the membranes designed for optimized osmotic power extraction. Furthermore, we present various applications utilizing the salinity gradient energy conversion.     

Thermally responsive ionic transport system reinforced by aligned functional carbon nanotubes backbone

Ion transport plays an important role in energy conversion, biosensors, and a variety of biological processes. Carbon nanotubes, especially for the carbon nanotubes arrays with controlled vertically aligned structures, have displayed great potential as a promising material for regulating ion transport behaviors in the applications of the nanofluidic devices and osmotic energy conversion. Herein, we demonstrate the thermo-controlled ion transport system through the vertically aligned multiwall carbon nanotubes arrays membrane modified by the thermo-responsive hydrogel in a simple and reliable way. The functional carbon nanotubes backbone with the inherent surface charge and interstitial channels structure renders the system improved ion transport behaviors and well controlled switching property by thermo. Based on the integrated properties, the energy output from osmotic power in this system could be regulated by the reversible temperature switches. Moreover, it can realize a higher osmotic energy conversion property regulated by the thermos, which may extend the practical application in the future. The system that combines intelligent response with controlled ion transport behaviors and potential osmotic energy utilizations presents a valuable paradigm for the use of carbon nanotubes and hydrogel composite materials and provides a promising way for applications of nanofluidic devices.     

Anomalous Pore‐Density Dependence in Nanofluidic Osmotic Power Generation

Osmotic power generation in biomimetic nanofluidic systems has attracted considerable research interest owing to the enhanced performance and long‐term stability. Towards practical applications, when extrapolating the materials from single‐nanopore to multi‐pore membranes, conventional viewpoint suggests that, to gain high electric power density, the porosity should be as high as possible. However, recent experimental observations show that the commonly‐used linear amplification method largely overestimates the actual performance, particularly at high pore density. Herein, we provide a theoretical investigation to understand the reason. We find a counterintuitive pore‐density dependence in high porosity nanofluidic systems that, once the pore density approaches more than 1×10⁹ pores/cm², the overall output electric power goes down with the increasing pore density. The excessively high pore density impairs the charge selectivity and induces strong ion concentration polarization, which undermines the osmotic power generation process. By optimizing the geometric size of the nanopores, the performance degradation can be effectively relieved. These findings clarify the origin of the unsatisfactory performance of the current osmotic nanofluidic power sources, and provide insights to further optimize the device.     

二维材料用于渗透能转换的研究进展

在河水与海水的交界处实现渗透能提取与捕获是解决未来能源危机的重要方式之一. 渗透能因为储量大, 容易获取以及绿色可持续的优势受到广泛关注. 反向电渗析技术是一种能够有效捕获渗透能的方法之一, 目前已经得到了深入的研究与发展. 离子交换膜是反向电渗析技术转换渗透能的关键组件, 其性能的优异程度决定能量转换效率的高低. 常见的膜材料主要是高分子聚合物及其改性化合物, 最近一些二维材料如石墨烯、 氧化石墨烯、 二硫化钼、 各种框架材料及其改性复合物因优异的选择性离子传输、 纳米级通道、 丰富的表面功能基团以及可修饰性成为捕获渗透能的重要膜材料. 本文综合评述了二维材料作为离子传输通道的类型以及相应的传输机理; 例举了二维材料及其复合物的设计方案和在渗透能转换方面的具体应用; 最后提出了目前二维材料在渗透能转换领域中面临的挑战以及未来的发展方向.     

Heterogeneous Electrospinning Nanofiber Membranes with pH-regulated Ion Gating for Tunable Osmotic Power Harvesting

Biological ion channels existing in organisms are critical for many biological processes. Inspired by biological ion channels, the heterogeneous electrospinning nanofiber membranes (HENM) with functional ion channels are constructed by electrospinning technology. The HENM successfully realizes ion-gating effects, which can be used for tunable energy conversions. Introduction of pyridine and carboxylic acid groups into the HENM plays an important role in generating unique and stable ion transport behaviors, in which gates become alternative states of open and close, responding to symmetric/asymmetric pH stimulations. Then we used the HENM to convert osmotic energy into electric energy which reach a maximum value up to 12.34 W m⁻² and the output power density of HENM-based system could be regulated by ion-gating effects. The properties of the HENM provide widespread potentials in application of smart nanofluidic devices, energy conversion, and water treatment.     

Nanofluidic osmotic power generators – advanced nanoporous membranes and nanochannels for blue energy harvesting

The increase of energy demand added to the concern for environmental pollution linked to energy generation based on the combustion of fossil fuels has motivated the study and development of new sustainable ways for energy harvesting. Among the different alternatives, the opportunity to generate energy by exploiting the osmotic pressure difference between water sources of different salinities has attracted considerable attention. It is well-known that this objective can be accomplished by employing ion-selective dense membranes. However, so far, the current state of this technology has shown limited performance which hinders its real application. In this context, advanced nanostructured membranes (nanoporous membranes) with high ion flux and selectivity enabling the enhancement of the output power are perceived as a promising strategy to overcome the existing barriers in this technology. While the utilization of nanoporous membranes for osmotic power generation is a relatively new field and therefore, its application for large-scale production is still uncertain, there have been major developments at the laboratory scale in recent years that demonstrate its huge potential. In this review, we introduce a comprehensive analysis of the main fundamental concepts behind osmotic energy generation and how the utilization of nanoporous membranes with tailored ion transport can be a key to the development of high-efficiency blue energy harvesting systems. Also, the document discusses experimental issues related to the different ways to fabricate this new generation of membranes and the different experimental set-ups for the energy-conversion measurements. We highlight the importance of optimizing the experimental variables through the detailed analysis of the influence on the energy capability of geometrical features related to the nanoporous membranes, surface charge density, concentration gradient, temperature, building block integration, and others. Finally, we summarize some representative studies in up-scaled membranes and discuss the main challenges and perspectives of this emerging field.

Advanced nanostructured membranes with high ion flux and selectivity bring new opportunities for generating clean energy by exploiting the osmotic pressure difference between water sources of different salinities.     

Membrane potential in charged porous membranes

For charged porous membranes, the separation efficiency to charged particles and ions is affected by the electrical properties of the membrane surface. Such properties are most commonly quantified in terms of zeta-potential. In this paper, it is shown that the zeta-potential can be calculated numerically from the membrane potential. The membrane potential expression for charged capillary membranes in contact with electrolyte solutions at different concentrations is established by applying the theory of non-equilibrium thermodynamic to the membrane process and considering the space-charge model. This model uses the Nernst–Planck and Navier–Stokes equations for transport through pores, and the non-linear Poisson–Boltzmann equation, which is numerically solved, for the electrostatic condition of the fluid inside pores. The integral expressions of the phenomenological coefficients coupling the differential flow (solute relative to solvent) and the electrical current with the osmotic pressure and the electrical potential gradients are established and calculated numerically. The mobilities of anions and cations are individually specified. The variations of the membrane potential (or the apparent transport number of ions in the membrane pores) are studied as a function of different parameters: zeta-potential, pore radius, mean concentration in the membrane, ratio of external concentrations and type of ions.     

Electrolysis of sodium chloride using composite poly(styrene-co-divinylbenzene) cation exchange membranes

Composite cation exchange membranes are prepared from cross-linked styrene-divinylbenzene copolymers for the electrolysis of sodium chloride to produce sodium hydroxide and chlorine by selective removal of sodium ions. It is prepared from a syrup of the polymer using dual initiating system and is modified with chloroacetic acid to introduce acid functional groups (COO⁻) on its surface. The effect of the modification is confirmed by FTIR, SEM, contact angle, water content, and ion exchange capacity measurements. The performance of the membrane has been evaluated in terms of current efficiency and power consumption and the effect of current density, salt concentration and flow rate on efficiency has been studied. Our membrane has an ion exchange capacity of 0.833 meq./g which is close to that of the commercially available Nafion-117 membrane having an ion exchange capacity 0.9 meq./g. The Nafion-117 used for electrodialysis of sodium sulfate has a current efficiency of around 90% and specific energy consumption of 0.1 kW/mol at 2N concentration of the salt at 1000 A/m². Our membrane used for electrodialysis of sodium chloride has a current efficiency of 93% and a power consumption of around 0.3122 kW/mol at the same concentration of salt and at a current density of 254 A/m². The two-dimensional space-charge model in cylindrical coordinates has been solved semi-analytically to obtain the effective wall potential and pore size of the membrane which are difficult to measure directly. The experimentally obtained solute flux and current density have been fitted to the model and optimum values of effective wall potential and pore diameter have been determined to be 98.5 mV and 0.8 nm, respectively.     

Toward Scalable Nanofluidic Osmotic Power Generation from Hypersaline Water Sources with a Metal–Organic Framework Membrane

Nanofluidic membranes have shown great promise in harvesting osmotic energy but its scalablity remains challenging since most studies only tested with a membrane area of ≈10⁻² mm² or smaller. We demonstrate that metal-organic-framework membranes with subnanometer pores can be used for scalable osmotic power generation from hypersaline water sources. Our membrane can be scaled up to a few mm², and the power density can be stabilized at 1.7 W m⁻². We reveal that the key is to improve the out-of-membrane conductance while keeping the membrane's charge selectivity, contradicting the previous conception that the ionic conductivity of the membrane plays the dominating role. We highlight that subnanometer pores are essential to ensure the charge selectivity in hypersaline water sources. Our results suggest the importance to engineer the interplay between the in-membrane and out-of-membrane ion transport properties for scalable osmotic power generation.     

Characterization of Zinc Ion Transport Via Dialysis Process

Treatment of metal ions' wastes is getting more interest due to the tight regulations for environmental protection. Dialysis, a membrane based process with the concentration difference as the driving force, may be used for separation of metal ions from wastewater. In this study membranes with different pore sizes including Accurel, Celgard, GVHP, PM30 and PTHK membranes were employed to characterise the transport of zinc ion in various (0.01, 0.1, 0.5, 1, 5 and 10 w/v percent) initial feed concentrations. The results show that low initial feed concentration causes less passage of ions through the membrane due to low driving force, i.e. concentration gradient across the membrane. This result is expected. However the effect of membrane pore size is somehow unexpected. It was found that the large pore size membranes provide less penetration of the metal ions through the membrane. This reproducible result has been explained based on the transport mechanism. Two types of mechanisms, i.e. extensive and intensive mechanisms, have been suggested for metal ion transport through different pore size membranes.     

On the Role of Heterogeneous Nanopore Junction in Osmotic Power Generation

Osmotic power generated by mixing ionic solutions of different concentration is an underutilized clean energy resource that satisfy potentially the ever‐growing energy demand. For decades, substantial efforts are made to enhance the power density. Toward this goal, we once developed a heterogeneous nanoporous membrane comprising of heterojunctions between negatively charged mesoporous carbon and positively charged macroporous alumina to harvest electric power from salinity difference and achieved outstanding performance (J. Am. Chem. Soc. 2014 , 136, 12265). The heterogeneous nanopore junction effectively suppresses ion concentration polarization (ICP) at low concentration end, and consequently promotes the overall power density. However, to date, a systematic understanding of the role of the heterogeneous nanopore junction in osmotic energy conversion remains urgent and largely unexplored. Herein, we provide an in‐depth theoretical investigation on this issue with special emphasis on several influential factors, such as the ionic concentration, the surface charge density, and the geometry of heterogeneous part. To balance the suppression of ICP and maintenance of charge selectivity, we find that these influential factors in the heterogeneous part should be restricted to a specific range. These findings provide direct guidance for design and optimization of high‐performance nanofluidic power sources.     

Molecular mechanism for lipid flip-flops

Transmembrane lipid translocation (flip-flop) processes are involved in a variety of properties and functions of cell membranes, such as membrane asymmetry and programmed cell death. Yet, flip-flops are one of the least understood dynamical processes in membranes. In this work, we elucidate the molecular mechanism of pore-mediated transmembrane lipid translocation (flip-flop) acquired from extensive atomistic molecular dynamics simulations. On the basis of 50 successful flip-flop events resolved in atomic detail, we demonstrate that lipid flip-flops may spontaneously occur in protein-free phospholipid membranes under physiological conditions through transient water pores on a time scale of tens of nanoseconds. While the formation of a water pore is induced here by a transmembrane ion density gradient, the particular way by which the pore is formed is irrelevant for the reported flip-flop mechanism: the appearance of a transient pore (defect) in the membrane inevitably leads to diffusive translocation of lipids through the pore, which is driven by thermal fluctuations. Our findings strongly support the idea that the formation of membrane defects in terms of water pores is the rate-limiting step in the process of transmembrane lipid flip-flop, which, on average, requires several hours. The findings are consistent with available experimental and computational data and provide a view to interpret experimental observations. For example, the simulation results provide a molecular-level explanation in terms of pores for the experimentally observed fact that the exposure of lipid membranes to electric field pulses considerably reduces the time required for lipid flip-flops.     

Convection-aided collection of metal ions using chelating porous flat-sheet membranes

Chelating porous membranes were prepared by radiation-induced graft polymerization of an epoxy-group-containing monomer onto a polyethylene flat sheet and subsequent conversion of the epoxy group to an iminodiacetate group as a chelate-forming group. The chelating group density on the resultant porous flat-sheet membrane of 1.0 mol/kg was comparable to that of commercially available chelating beads. The pure water permeability of the membrane was 40% that of the trunk porous membrane, which was used for microfiltration. During the permeation of a copper chloride solution through the membrane, diffusional mass-transfer resistance of copper ion was negligible, since the ion was transported by convective flow through the pore. The tensile strength and elongation at break of the membranes were measured as a function of dose of electron-beam irradiation, the degree of grafting, and the chelating group density to determine an applicable range for practical use.     

Pore Engineering for Covalent Organic Framework Membranes

Membrane technology is of particular significance for the sustainable development of society owing to its potential capacity to tackle the energy shortage and environmental pollution. Membrane materials are the core part of membrane technology. Researchers have always been pursuing predictable structures of advanced membrane materials, which provides a possibility to fully unlock the potential of membranes. Covalent organic frameworks(COFs), with the advantage of controllable pore microenvironment, are considered to be promising candidates to achieve this design concept. The customizable function of COF membranes through pore engineering does well in the enhancement of selective permeability performance, which offers COF membranes with great application potentials in separation and transportation fields. In this context, COF-based membranes have been developed rapidly in recent years. Herein, we present a brief overview on the strategies developed for pore engineering of COF membranes in recent years, including skeleton engineering, pore surface engineering, host-guest chemistry and membrane fabrication. Moreover, the features of transmission or separation of molecules/ions based on COF membranes and corresponding applications are also introduced. In the last part, the challenges and prospects of the development of COF membranes are discussed.