Fluorescence resonance energy transfer by quencher adsorption into hydrogels containing fluorophores

We synthesized anionic hydrogels containing fluorophores and investigated the adsorption of a cationic quencher having an amino group into hydrogels by fluorescence resonance energy transfer (FRET). FRET from the fluorophore to the quencher in hydrogels was examined by fluorescence intensity and fluorescence decay using a fluorescence spectrophotometer and femtosecond laser spectroscopy. The fluorescence intensity of the fluorophore‐containing hydrogels decreased rapidly with increasing amounts of adsorbed cationic quencher. The fluorescence emission of the fluorophore in the quencher‐adsorbed hydrogels containing fluorophores decayed more rapidly than that of the original hydrogels. The aforementioned result indicates that the fluorescence of the fluorophore‐containing hydrogels is quenched due to FRET from the fluorophore to the quencher as the cationic quenchers can approach the fluorophores in hydrogels by electrostatic interactions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3245–3252, 2006     

Dual‐Polarization Imaging of a Dual‐Fluorophore Ion Sensor: A Single‐Molecule Study

The fluorescence emission of the dual‐fluorophore Ca²⁺ ion sensor molecule, calcium‐green 2 (CG‐2), has been characterized using dual‐polarization imaging at the single‐molecule level. By comparing the fluorescence intensity of individual CG‐2 molecules in two mutually orthogonal polarization image channels, information about the relative orientation of the two constituent fluorophores in the molecule is obtained. Experimental results from polarization measurements are compared with those predicted from a geometric model based on coupled‐fluorophores that are randomly distributed in space. The results confirm previous optical spectroscopy‐based predictions of the orientation of CG‐2′s fluorophores, and the general applications of this dual‐polarization imaging approach for characterizing the optical properties of molecules containing multiple fluorophores is discussed.     

A Reversible Dual‐Response Fluorescence Switch for the Detection of Multiple Analytes

This paper reports a reversible dual fluorescence switch for the detection of a proton target and 2,4,6‐trinitrotoluene (TNT) with opposite‐response results, based on fluorophore derivatization of silica nanoparticles. Fluorescent silica nanoparticles were synthesized through modification of the surface with a nitrobenzoxadiazole (NBD) fluorophore and an organic amine to form a hybrid monolayer of fluorophores and amino ligands; the resultant nanoparticles showed different fluorescence responses to the proton target and TNT. Protonation of the amino ligands leads to fluorescence enhancement due to inhibition of photoinduced electron transfer (PET) between the amine and fluorophore. By contrast, addition of TNT results in fluorescence quenching because a fluorescence resonance energy transfer (FRET) happens between the NBD fluorophore and the formed TNT–amine complex. The fluorescence signal is reversible through washing with the proper solvents and the nanoparticles can be reused after centrifugal separation. Furthermore, these nanoparticles were assembled into chips on an etched silicon wafer for the detection of TNT and the proton target. The assembled chip can be used as a convenient indicator of herbicide (2,4‐dichlorophenoxyacetic acid) and TNT residues with the use of only 10 μL of sample. The simple NBD‐grafted silica nanoparticles reported here show a reversible signal and good assembly flexibility; thus, they can be applied in multianalyte detection.     

Single‐Molecule Monitoring of the Structural Switching Dynamics of Nucleic Acids through Controlling Fluorescence Blinking

Single‐molecule fluorescence resonance energy transfer (smFRET) is a powerful tool to investigate the dynamics of biomolecular events in real time. However, it requires two fluorophores and can be applied only to dynamics that accompany large changes in distance between the molecules. Herein, we introduce a method for kinetic analysis based on control of fluorescence blinking (KACB), a general approach to investigate the dynamics of biomolecules by using a single fluorophore. By controlling the kinetics of the redox reaction the blinking kinetics or pattern can be controlled to be affected by microenvironmental changes around a fluorophore (rKACB), thereby enabling real‐time single‐molecule measurement of the structure‐changing dynamics of nucleic acids.     

Installation/modulation of the emission response via click reaction

We have demonstrated the installation of a fluorescence property into a nonfluorescent precursor and modulation of an emission response of a pyrene fluorophore via click reaction. The synthesized fluorophores show different solvatochromicity and/or intramolecular charge transfer (ICT) feature as is revealed from the UV-visible, fluorescence photophysical properties of these fluorophores, and DFT/TDDFT calculation. We observed that some of the synthesized fluorophores showed purely ICT character while emission from some of them arose from the LE state. A structureless and solvent polarity-sensitive dual emission behavior was observed for one of the triazolylpyrene fluorophores that contains an electron-donating -NMe(2) substituent (fluorophore, 7a). Conversely, triazolylpyrene with an electron-withdrawing -CN group (fluorophore, 7b) showed a solvent polarity-independent vibronic emission. The effect of ICT on the photophysical properties of these fluorophores was studied by fluorescence emission spectra and DFT/TDDFT calculations. Fluorescence lifetimes were also measured in different solvents. All of our findings revealed the delicate interplay of structure and emission properties and thus having broader general utility. As the CT to LE intensity ratio can be employed as a sensing index, the dual emissive fluorophore can be utilized in designing the molecular recognition system too. We envisage that our investigation is of importance for the development of new fluorophores with predetermined photophysical properties that may find a wide range of applications in chemistry, biology, and material sciences.     

Phosphonated Near‐Infrared Fluorophores for Biomedical Imaging of Bone

The conventional method for creating targeted contrast agents is to conjugate separate targeting and fluorophore domains. A new strategy is based on the incorporation of targeting moieties into the non‐delocalized structure of pentamethine and heptamethine indocyanines. Using the known affinity of phosphonates for bone minerals in a model system, two families of bifunctional molecules that target bone without requiring a traditional bisphosphonate are synthesized. With peak fluorescence emissions at approximately 700 or 800 nm, these molecules can be used for fluorescence‐assisted resection and exploration (FLARE) dual‐channel imaging. Longitudinal FLARE studies in mice demonstrate that phosphonated near‐infrared fluorophores remain stable in bone for over five weeks, and histological analysis confirms their incorporation into the bone matrix. Taken together, a new strategy for creating ultra‐compact, targeted near‐infrared fluorophores for various bioimaging applications is described.     

Single‐Molecule Photoactivation FRET: A General and Easy‐To‐Implement Approach To Break the Concentration Barrier

Single‐molecule fluorescence resonance energy transfer (sm‐FRET) has become a widely used tool to reveal dynamic processes and molecule mechanisms hidden under ensemble measurements. However, the upper limit of fluorescent species used in sm‐FRET is still orders of magnitude lower than the association affinity of many biological processes under physiological conditions. Herein, we introduce single‐molecule photoactivation FRET (sm‐PAFRET), a general approach to break the concentration barrier by using photoactivatable fluorophores as donors. We demonstrate sm‐PAFRET by capturing transient FRET states and revealing new reaction pathways during translation using μm fluorophore labeled species, which is 2–3 orders of magnitude higher than commonly used in sm‐FRET measurements. sm‐PAFRET serves as an easy‐to‐implement tool to lift the concentration barrier and discover new molecular dynamic processes and mechanisms under physiological concentrations.     

Multivariate curve resolution analysis excitation-emission matrices of fluorescence of humic substances

Excitation-emission matrices (EEM) of fluorescence of aqueous solutions of humic substances (HS), and sets of EEM acquired as function of the HS concentration, were analysed by multivariate curve resolution alternating least squares (MCR-ALS). Three types of HS samples were studied: one commercial humic acid; two samples of fulvic acid (FA) extracted from a pinewood soil; two samples of FA extracted from recycled wastes. The fluorescence measurements were carried out at HS concentration between 5 and 100 mg/L and at pH 6. The application of MCR-ALS algorithm on each individual EEM, as well as on column-wise augmented matrices, allows the identification of three major fluorophores in all HS samples analysed. The emission and excitation spectra of these fluorophores were recovered and are characteristic of each sample. Moreover, the variation of the fluorescence intensities of each fluorophore with HS concentration shows deviations from linearity at HS concentration higher than 30 mg/L, depending on the fluorophore and/or sample. This behaviour reveals the existence of inner filter effects that affect the proportionally between the fluorescent signal and concentration but do not provoke measurable distortions on the fluorescence spectra of the detected fluorophores.     

Oligodeoxyfluorosides: Strong Sequence Dependence of Fluorescence Emission

We describe the properties of a series of oligomeric polyfluorophores assembled on the DNA backbone. The 11 oligomers (oligodeoxyfluorosides, ODFs), 4-7 monomers in length, were composed of only two fluorescent monomers and a spacer in varied sequences, and were designed to test how fluorescent nucleobases can interact electronically to yield complexity in fluorescence emission. The monomer fluorophores were deoxyribosides of pyrene and perylene, which emit light in violet and blue wavelengths, respectively. The experiments show that simple variation in sequence and spacing can dramatically change fluorescence, yielding emission maxima ranging from 380 to 557 nm and visible colors from violet to orange-red. Fluorescence lifetime data, excitation spectra, and absorption data point to a number of multi-fluorophore electronic interactions, including pyrene-pyrene and perylene-perylene excimers, pyrene-perylene exciplexes, as well as monomer dye emissions, contributing to the final spectral outcomes. Thus, two simple fluorophores can be readily combined to give emissions over much of the visible spectrum, all requiring only a single excitation. The results demonstrate that fluorescent nucleobases in oligomeric form can act cooperatively as electronic units, and that fluorophore sequence in such oligomers is as important as fluorophore composition in determining fluorescence properties.     

Nanothermometry: From Microscopy to Thermal Treatments

Measuring temperature in cells and tissues remotely, with sufficient sensitivity, and in real time presents a new paradigm in engineering, chemistry and biology. Traditional sensors, such as contact thermometers, thermocouples, and electrodes, are too large to measure the temperature with subcellular resolution and are too invasive to measure the temperature in deep tissue. The new challenge requires novel approaches in designing biocompatible temperature sensors—nanothermometers—and innovative techniques for their measurements. In the last two decades, a variety of nanothermometers whose response reflected the thermal environment within a physiological temperature range have been identified as potential sensors. This review covers the principles and aspects of nanothermometer design driven by two emerging areas: single‐cell thermogenesis and image guided thermal treatments. The review highlights the current trends in nanothermometry illustrated with recent representative examples.     

Fluorescent dendritic polymers and nanostructured coatings for the detection of chemical warfare agents and other analytes

Polyamidoamine (PAMAM) dendrimers of generations zero (G0) to four (G4), and a hyperbranched polyurea (HB‐PU), were functionalized with 1,5‐dansyl (1,5‐D), 2,5‐dansyl (2,5‐D), 2,6‐dansyl (2,6‐D) and nitrobenzofurazan (NBD) fluorophores that change their fluorescence emission wavelength in response to chemical environment, and the resulting dendritic polymers were characterized by MALDI‐TOF mass spectrometry, ¹H NMR, ¹³C NMR, and fluorescence spectroscopy. Fluorophore‐functionalized dendritic polymers were then reacted further with 3‐acryloxypropyldimethoxymethylsilane (AOP‐DMOMS) at various fluorophore to DMOMS substitution ratios. The resulting materials were cast onto glass slides, and cured into robust nanostructured coatings. Coatings with 50% fluorophore–50% DMOMS substitution showed the strongest fluorescence and the best physical properties. Coated coupons were tested against a wide range of analytes including the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and chloroethylethylsulfide (CEES), and the water‐methanol‐ethanol series. It was found that the ability of the coatings to distinguish between analytes decreased with increasing cross‐link density for both dendrimer and hyperbranched polymer‐based coatings. It was also found that the percent fluorophore substitution and the type of dendritic polymer carrying the fluorophore had no significant effect upon fluorescence emission wavelength, but fluorescence emission wavelength became less dependent upon solvent with increasing dendrimer generation and molecular mass. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5101–5115, 2009     

Gold nanoparticle-fluorophore complex for conditionally fluorescing signal mediator

Fluorescent contrast agents with high specificity and sensitivity are valuable for accurate disease detection and diagnosis. Spherical gold nanoparticles (GNPs) can be smartly utilized for developing highly effective agents. The strong electromagnetic (plasmon) field on their surface can be very effective in influencing the electrons of fluorophores and, thus, manipulating the fluorescence output (i.e., either quenching or enhancement). Fluorescence quenching can be used for negative sensing, or for conditional de-quenching to increase the specificity. Fluorescence enhancement allows sensing to be more sensitive. The level of fluorescence alteration depends on the GNP size, the excitation and emission wavelengths and quantum yield of the fluorophore, and the distance between the GNP and the fluorophore. To understand the mechanisms of the fluorescence change by GNP, we have theoretically analyzed the parameters involved in the fluorescence alteration for commonly used fluorophores, with an emphasis on quenching. The results showed that the fluorescence of fluorophores with the excitation (Ex) and emission (Ex) wavelengths close to the GNP resonance peak tended to be significantly quenched by GNPs. For those fluorophores emitting fluorescence in red or near infrared, to achieve quenching, the distance between GNP and the fluorophore was required to be very short. In general, a shorter distance resulted in more quenching. Bigger GNPs require a shorter distance to achieve the same level of quenching. The fluorescence of a fluorophore with a lower quantum yield (especially the one with emission in far-red or near-infrared) is more difficult to be quenched by GNPs (requires very short distance). Instead, it can be enhanced. Based on the theoretical study, we have developed a near-infrared contrast agent, i.e., Cypate conjugated GNP via a short peptide spacer. Normally the fluorescence of Cypate was quenched. The spacer has a motif of a substrate for urokinase type plasminogen activator (uPA; cancer-secreting enzyme). This contrast agent emits fluorescence only in the presence of uPA, where the uPA cleaves the spacer. This design can be used in characterization of the cancer type and also in diagnosing other diseases with signature enzymes.     

Make them Blink: Probes for Super‐Resolution Microscopy

In recent years, a number of approaches have emerged that enable far‐field fluorescence imaging beyond the diffraction limit of light, namely super‐resolution microscopy. These techniques are beginning to profoundly alter our abilities to look at biological structures and dynamics and are bound to spread into conventional biological laboratories. Nowadays these approaches can be divided into two categories, one based on targeted switching and readout, and the other based on stochastic switching and readout of the fluorescence information. The main prerequisite for a successful implementation of both categories is the ability to prepare the fluorescent emitters in two distinct states, a bright and a dark state. Herein, we provide an overview of recent developments in super‐resolution microscopy techniques and outline the special requirements for the fluorescent probes used. In combination with the advances in understanding the photophysics and photochemistry of single fluorophores, we demonstrate how essentially any single‐molecule compatible fluorophore can be used for super‐resolution microscopy. We present examples for super‐resolution microscopy with standard organic fluorophores, discuss factors that influence resolution and present approaches for calibration samples for super‐resolution microscopes including AFM‐based single‐molecule assembly and DNA origami.     

Self-duplex formation of an A(py)-substituted oligodeoxyadenylate and its unique fluorescence

Unexpected homoadenine self-duplexes are formed when pyrene units are bound covalently to the deoxyadenosine bases at specific distances (1,4 relationships). This discovery illustrates how small-molecule pyrene intercalators can be used to drive unknown nucleic acid assembly with a concomitant change in fluorescence. When a pair of pyrene fluorophore units is located within an oligodeoxyadenylate chain, the system can display three different colors (reddish-orange, green, or blue) depending on the relative location of the fluorophores. A unique fluorescence signal, a reddish band peaking at 580 nm, appears when the oligomers possess more than two spacers between the pyrene fluorophores(1,4 relationships). Several spectroscopic experiments, for example, recording variable-concentration spectra, CD, UV, melting temperature, and gel electropherogram, indicate that this new reddish band came from an intermolecular homoadenine self-duplex. Time-resolved fluorescence measurements using both TCSPC and upconversion methods indicate that this unique fluorescence has a long lifetime.     

Distance-dependent metal-enhanced fluorescence from Langmuir-Blodgett monolayers of alkyl-NBD derivatives on silver island films

We described the effect of fluorophore distance from the silver island films (SIFs) on the metal-enhanced fluorescence (MEF) from two newly developed long-chain nitrobenzoxadiazole derivatives (NBD-C16 and NBD-C18). The well-established Langmuir-Blodgett technique is used to deposit the fluorophores at defined distances from the SIFs surface, and an inert amphiphilic stearic acid is used to control the distance. NBD probes deposited directly on the SIFs surface show the highest metal-enhanced fluorescence of approximately 32-fold, and both of the probes that were studied show a consistent decrease in metal-enhanced fluorescence when increasing the distance from the fluorophore to the SIFs surface. The lowest fluorescence enhancement of approximately 4-fold is observed for the probes located 90 nm from the SIFs surface. Additionally, we also have noticed the shortest fluorescence lifetimes for the NBD probes deposited directly onto the SIFs surface, and the lifetimes are consistently increased when increasing the distances between the fluorophore and SIFs surfaces. These contrasting spectral changes, enhanced fluorescence, and decreased fluorescence lifetimes are in accordance with an increase in the rate of radiative decay for fluorophores near the silver particles. The present study provides significant information on the effect of fluorophore distance on the metal-enhanced fluorescence phenomenon.     

A ratiometric fluorescent viscosity sensor

The development of a dual probe that provides ratiometric measurements of fluid viscosity is described. The design is based on coupling of a primary fluorophore with viscosity-independent fluorescence emission (blue unit) with a secondary fluorophore that exhibits viscosity-sensitive fluorescent emission quantum yield (red unit). Excitation of the secondary fluorophore can be achieved via Resonance Energy Transfer. The ratio of the fluorescence emission of these fluorophores provides an accurate, ratiometric measurement of solvent viscosity.     

Fluorophore‐Conjugated Holliday Junctions for Generating Super‐Bright Antibodies and Antibody Fragments

The site‐specific modification of proteins with fluorophores can render a protein fluorescent without compromising its function. To avoid self‐quenching from multiple fluorophores installed in close proximity, we used Holliday junctions to label proteins site‐specifically. Holliday junctions enable modification with multiple fluorophores at reasonably precise spacing. We designed a Holliday junction with three of its four arms modified with a fluorophore of choice and the remaining arm equipped with a dibenzocyclooctyne substituent to render it reactive with an azide‐modified fluorescent single‐domain antibody fragment or an intact immunoglobulin produced in a sortase‐catalyzed reaction. These fluorescent Holliday junctions improve fluorescence yields for both single‐domain and full‐sized antibodies without deleterious effects on antigen binding.     

Chemoselective Alteration of Fluorophore Scaffolds as a Strategy for the Development of Ratiometric Chemodosimeters

Ratiometric sensors generally couple binding events or chemical reactions at a distal site to changes in the fluorescence of a core fluorophore scaffold. However, such approaches are often hindered by spectral overlap of the product and reactant species. We provide a strategy to design ratiometric sensors that display dramatic spectral shifts by leveraging the chemoselective reactivity of novel functional groups inserted within fluorophore scaffolds. As a proof‐of‐principle, fluorophores containing a borinate ( RF₆₂₀ ) or silanediol ( SiOH2R ) functionality at the bridging position of the xanthene ring system are developed as endogenous H₂O₂ sensors. Both these fluorophores display far‐red to near‐infrared excitation and emission prior to reaction. Upon oxidation by H₂O₂ both sensors are chemically converted to tetramethylrhodamine, producing significant (≥66 nm) blue‐shifts in excitation and emission maxima. This work provides a new concept for the development of ratiometric probes.     

In Situ Localization of Enzyme Activity in Live Cells by a Molecular Probe Releasing a Precipitating Fluorochrome

Current enzyme‐responsive, fluorogenic probes fail to provide in situ information because the released fluorophores tend to diffuse away from the reaction sites. The problem of diffusive signal dilution can be addressed by designing a probe that upon enzyme conversion releases a fluorophore that precipitates. An excited‐state intramolecular proton transfer (ESIPT)‐based solid‐state fluorophore HTPQ was developed that is strictly insoluble in water and emits intense fluorescence in the solid state, with λ _ex/em=410/550 nm, thus making it far better suited to use with a commercial confocal microscope. HTPQ was further utilized in the design of an enzyme‐responsive, fluorogenic probe (HTPQA), targeting alkaline phosphatase (ALP) as a model enzyme. HTPQA makes possible diffusion‐resistant in situ detection of endogenous ALP in live cells. It was also employed in the visualizing of different levels of ALP in osteosarcoma cells and tissue, thus demonstrating its interest for the diagnosis of this type of cancer.     

Dimer formation of organic fluorophores reports on biomolecular dynamics under denaturing conditions

Stacking interactions between organic fluorophores can cause formation of non-fluorescent H-dimers. Dimer formation and dissociation of two fluorophores site-specifically incorporated in a biomolecule result in fluorescence intermittency that can report on conformational dynamics. We characterize intramolecular dimerization of two oxazine fluorophores MR121 attached to an unstructured polypeptide. Formation of stable non-fluorescent complexes with nano- to microsecond lifetimes is a prerequisite for analysing the intermittent fluorescence emission by fluorescence correlation spectroscopy and extracting relaxation time constants on nano- to millisecond time scales. Destabilization of the generally very stable homodimers by chemical denaturation reduces the lifetime of H-dimers. We demonstrate that H-dimer formation of an oxazine fluorophore reports on end-to-end contact rates in unstructured glycine-serine polypeptides under denaturing conditions.