Aggregation‐Induced Emission‐Active 1,4‐Dihydropyridine‐Based Dual‐Phase Fluorescent Sensor with Multiple Functions

A N‐2‐phenylethyl‐substituted 1,4‐dihydropyridine derivative (NDHP) containing 5,5‐dimethylcyclohexane‐1,3‐dione and naphthylethylene was designed and synthesized. NDHP acts as a multifunctional fluorescent sensor in dual phases. The crystal structure analysis confirms that the NDHP molecules have highly twisted conformations. The twisted conformation results in aggregation‐induced emission properties and solid‐state emission, by restricting the intramolecular free rotation in the aggregated or solid state. In the solid state, NDHP exhibits reversible mechanochromic properties as a result of the transition between the amorphous and crystalline states. NDHP also exhibits a rare phenomenon of acid‐fumed solid‐state emission enhancement owing to the change in packing mode from a zigzag arrangement to J‐aggregation. The solid‐state stimuli‐responsive fluorescence switching is applied to realize a rewritable optical recording media and a multiple output combinational logic system. In solution, NDHP shows a selective fluorescence response for environmentally harmful Hg²⁺, with a limit of detection of 2.7 nm . This results from the “turn‐on” responsive behavior owing to the Hg²⁺‐triggered aggregation of the NDHP molecules. NDHP is also used in the imaging of intracellular Hg²⁺ in HeLa cells. These findings provide a feasible and attractive route for developing multifunctional fluorescent sensors for use in dual phases.     

Phosphonated Near‐Infrared Fluorophores for Biomedical Imaging of Bone

The conventional method for creating targeted contrast agents is to conjugate separate targeting and fluorophore domains. A new strategy is based on the incorporation of targeting moieties into the non‐delocalized structure of pentamethine and heptamethine indocyanines. Using the known affinity of phosphonates for bone minerals in a model system, two families of bifunctional molecules that target bone without requiring a traditional bisphosphonate are synthesized. With peak fluorescence emissions at approximately 700 or 800 nm, these molecules can be used for fluorescence‐assisted resection and exploration (FLARE) dual‐channel imaging. Longitudinal FLARE studies in mice demonstrate that phosphonated near‐infrared fluorophores remain stable in bone for over five weeks, and histological analysis confirms their incorporation into the bone matrix. Taken together, a new strategy for creating ultra‐compact, targeted near‐infrared fluorophores for various bioimaging applications is described.     

Control of Circularly Polarized Luminescence by Orientation of Stacked π‐Electron Systems

Planar chiral building blocks based on 4,7,12,15‐tetrasubstituted [2.2]paracyclophanes were obtained via a synthetic route involving an optical resolution step. Planar chiral enantiomers, comprising two fluorophores that were stacked to form a V‐shaped higher‐ordered structure, were synthesized from these building blocks. The V‐shaped molecules emitted intense circularly polarized luminescence (CPL). Their chiroptical properties were compared with those of X‐shaped molecules bearing the same two fluorophores stacked together. The CPL sign of the X‐shaped molecule was opposite to that of the V‐shaped molecule, which is supported by the theoretical results, indicating that the CPL sign can be controlled by the orientation of the stacked fluorophores.     

Tunable Dual Fluorescence of 3‐(2,2′‐Bipyridyl)‐Substituted Iminocoumarin

3‐(2,2′‐Bipyridyl)‐substituted iminocoumarin molecules (compounds 1 and 2 ) exhibit dual fluorescence. Each molecule has one electron donor and two electron acceptors that are in conjugation, which leads to fluorescence from two independent charge transfer (CT) states. To account for the dual fluorescence, we subscribe to a kinetic model in which both CT states form after rapid decays from the directly accessed S₁ and S₂ excited states. Due to the slow internal conversion from S₂ to S₁, or more likely the slow interconversion between the two subsequently formed CT states, dual emission is allowed to occur. This hypothesis is supported by the following evidence: 1) the emission at short and long ends of the spectrum originates from two different excitation spectra, which eliminates the possibility that dual emission occurs after an adiabatic reaction at the S₁ level. 2) The fluorescence quantum yield of compound 2 grows with increasing excitation wavelength, which indicates that the high‐energy excitation elevates the molecule to a weakly emissive state that does not internally convert to the low‐energy, highly emissive state. The intensity of the two emission bands of 1 is tunable through the specific interactions between either of the two electron acceptors with another species, such as Zn²⁺ in the current demonstration. Therefore, the development of ratiometric fluorescent indicators based on the dual‐emitting iminocoumarin system is conceivable. Further fundamental studies on this series of compounds using time‐resolved spectroscopic techniques, and explorations of their applications will be carried out in the near future.     

Make them Blink: Probes for Super‐Resolution Microscopy

In recent years, a number of approaches have emerged that enable far‐field fluorescence imaging beyond the diffraction limit of light, namely super‐resolution microscopy. These techniques are beginning to profoundly alter our abilities to look at biological structures and dynamics and are bound to spread into conventional biological laboratories. Nowadays these approaches can be divided into two categories, one based on targeted switching and readout, and the other based on stochastic switching and readout of the fluorescence information. The main prerequisite for a successful implementation of both categories is the ability to prepare the fluorescent emitters in two distinct states, a bright and a dark state. Herein, we provide an overview of recent developments in super‐resolution microscopy techniques and outline the special requirements for the fluorescent probes used. In combination with the advances in understanding the photophysics and photochemistry of single fluorophores, we demonstrate how essentially any single‐molecule compatible fluorophore can be used for super‐resolution microscopy. We present examples for super‐resolution microscopy with standard organic fluorophores, discuss factors that influence resolution and present approaches for calibration samples for super‐resolution microscopes including AFM‐based single‐molecule assembly and DNA origami.     

Photoactivatable Aggregation‐Induced Emission Fluorophores with Multiple‐Color Fluorescence and Wavelength‐Selective Activation

Photoactivatable (caged) fluorophores are widely used in chemistry, materials, and biology. However, the development of such molecules exhibiting photoactivable solid‐state fluorescence is still challenging due to the aggregation‐caused quenching (ACQ) effect of most fluorophores in their aggregate or solid states. In this work, we developed caged salicylaldehyde hydrazone derivatives, which are of aggregation‐induced emission (AIE) characteristics upon light irradiation, as efficient photoactivatable solid‐state fluorophores. These compounds displayed multiple‐color emissions and ratiometric (photochromic) fluorescence switches upon wavelength‐selective photoactivation, and were successfully applied for photopatterning and photoactivatable cell imaging in a multiple‐color and stepwise manner.     

Single‐Molecule Spectroscopy,Imaging, and Photocontrol: Foundations for Super‐Resolution Microscopy (Nobel Lecture)

The initial steps toward optical detection and spectroscopy of single molecules in condensed matter arose out of the study of inhomogeneously broadened optical absorption profiles of molecular impurities in solids at low temperatures. Spectral signatures relating to the fluctuations of the number of molecules in resonance led to the attainment of the single‐molecule limit in 1989 using frequency‐modulation laser spectroscopy. In the early 90s, many fascinating physical effects were observed for individual molecules, and the imaging of single molecules as well as observations of spectral diffusion, optical switching and the ability to select different single molecules in the same focal volume simply by tuning the pumping laser frequency provided important forerunners of the later super‐resolution microscopy with single molecules. In the room temperature regime, imaging of single copies of the green fluorescent protein also uncovered surprises, especially the blinking and photoinduced recovery of emitters, which stimulated further development of photoswitchable fluorescent protein labels. Because each single fluorophore acts a light source roughly 1 nm in size, microscopic observation and localization of individual fluorophores is a key ingredient to imaging beyond the optical diffraction limit. Combining this with active control of the number of emitting molecules in the pumped volume led to the super‐resolution imaging of Eric Betzig and others, a new frontier for optical microscopy beyond the diffraction limit. The background leading up to these observations is described and current developments are summarized.     

Efficient NIR‐Light Emission from Solid‐State Complexes of Boron Difluoride with 2′‐Hydroxychalcone Derivatives

This article describes a series of nine complexes of boron difluoride with 2′‐hydroxychacone derivatives. These dyes were synthesized very simply and exhibited intense NIR emission in the solid state. Complexation with boron was shown to impart very strong donor–acceptor character into the excited state of these dyes, which further shifted their emission towards the NIR region (up to 855 nm for dye 5 b , which contained the strongly donating triphenylamine group). Strikingly, these optical features were obtained for crystalline solids, which are characterized by high molecular order and tight packing, two features that are conventionally believed to be detrimental to luminescence in organic crystals. Remarkably, the emission of light from the π‐stacked molecules did not occur at the expense of the emission quantum yield. Indeed, in the case of pyrene‐containing dye 4 , for example, a fluorescence quantum yield of about 15 % with a fluorescence emission maximum at 755 nm were obtained in the solid state. Moreover, dye 3 a and acetonaphthone‐based compounds 1 b , 2 b , and 3 b showed no evidence of degradation as solutions in CH₂Cl₂ that contained EtOH. In particular, solutions of brightly fluorescent compound 3 a (brightness: ε×Φ_f=45 000 M ^?1 cm^?1) could be stored for long periods without any detectable changes in its optical properties. All together, these new dyes possess a set of very interesting properties that make them promising solid‐state NIR fluorophores for applications in materials science.     

Single‐Molecule Visualization of the Activity of a Zn2+‐Dependent DNAzyme

We demonstrate the single‐molecule imaging of the catalytic reaction of a Zn²⁺‐dependent DNAzyme in a DNA origami nanostructure. The single‐molecule catalytic activity of the DNAzyme was examined in the designed nanostructure, a DNA frame. The DNAzyme and a substrate strand attached to two supported dsDNA molecules were assembled in the DNA frame in two different configurations. The reaction was monitored by observing the configurational changes of the incorporated DNA strands in the DNA frame. This configurational changes were clearly observed in accordance with the progress of the reaction. The separation processes of the dsDNA molecules, as induced by the cleavage by the DNAzyme, were directly visualized by high‐speed atomic force microscopy (AFM). This nanostructure‐based AFM imaging technique is suitable for the monitoring of various chemical and biochemical catalytic reactions at the single‐molecule level.     

DCDHF Fluorophores for Single‐Molecule Imaging in Cells

There is a persistent need for small‐molecule fluorescent labels optimized for single‐molecule imaging in the cellular environment. Application of these labels comes with a set of strict requirements: strong absorption, efficient and stable emission, water solubility and membrane permeability, low background emission, and red‐shifted absorption to avoid cell autofluorescence. We have designed and characterized several fluorophores, termed “DCDHF” fluorophores, for use in live‐cell imaging based on the push–pull design: an amine donor group and a 2‐dicyanomethylene‐3‐cyano‐2,5‐dihydrofuran (DCDHF) acceptor group, separated by a π‐rich conjugated network. In general, the DCDHF fluorophores are comparatively photostable, sensitive to local environment, and their chemistries and photophysics are tunable to optimize absorption wavelength, membrane affinity, and solubility. Especially valuable are fluorophores with sophisticated photophysics for applications requiring additional facets of control, such as photoactivation. For example, we have reengineered a red‐emitting DCDHF fluorophore so that it is dark until photoactivated with a short burst of low‐intensity violet light. This molecule and its relatives provide a new class of bright photoactivatable small‐molecule fluorophores, which are needed for super‐resolution imaging schemes that require active control (here turning‐on) of single‐molecule emission.     

Crystal‐State Photochromism and Dual‐Mode Mechanochromism of an Organic Molecule with Fluorescence,Room‐Temperature Phosphorescence,and Delayed Fluorescence

A D‐A‐D′ type pure organic molecule, named ODFRCZ, has unique triple‐emission character covering fluorescence, phosphorescence, and delayed fluorescence (DF). The phosphorescence of ODFRCZ has a rather long lifetime of about 350 ms at room temperature. One dimer of ODFRCZ with enhanced parallel molecular packing acts more effectively to prompt ISC processes, which further generates room‐temperature phosphorescence (RTP), owing to the larger transition dipole moment and closer energy level between S₁ and T_n. ODFRCZ is a rare example of an organic RTP molecule that shows dual‐stimuli responsiveness of dual‐mode mechanochromism (fluorescence red‐shift and RTP/DF on‐off switch) and reversible crystal‐state photochromism. This work may broaden the knowledge for stimuli‐responsive RTP organic molecules and lay the foundation for their wide‐scale applications.     

High‐Resolution Single‐Molecule Fluorescence Imaging of Zeolite Aggregates within Real‐Life Fluid Catalytic Cracking Particles

Fluid catalytic cracking (FCC) is a major process in oil refineries to produce gasoline and base chemicals from crude oil fractions. The spatial distribution and acidity of zeolite aggregates embedded within the 50–150 μm‐sized FCC spheres heavily influence their catalytic performance. Single‐molecule fluorescence‐based imaging methods, namely nanometer accuracy by stochastic chemical reactions (NASCA) and super‐resolution optical fluctuation imaging (SOFI) were used to study the catalytic activity of sub‐micrometer zeolite ZSM‐5 domains within real‐life FCC catalyst particles. The formation of fluorescent product molecules taking place at Brønsted acid sites was monitored with single turnover sensitivity and high spatiotemporal resolution, providing detailed insight in dispersion and catalytic activity of zeolite ZSM‐5 aggregates. The results point towards substantial differences in turnover frequencies between the zeolite aggregates, revealing significant intraparticle heterogeneities in Brønsted reactivity.     

Crystal‐State Photochromism and Dual‐Mode Mechanochromism of an Organic Molecule with Fluorescence,Room‐Temperature Phosphorescence,and Delayed Fluorescence

A D‐A‐D′ type pure organic molecule, named ODFRCZ, has unique triple‐emission character covering fluorescence, phosphorescence, and delayed fluorescence (DF). The phosphorescence of ODFRCZ has a rather long lifetime of about 350 ms at room temperature. One dimer of ODFRCZ with enhanced parallel molecular packing acts more effectively to prompt ISC processes, which further generates room‐temperature phosphorescence (RTP), owing to the larger transition dipole moment and closer energy level between S₁ and T_n. ODFRCZ is a rare example of an organic RTP molecule that shows dual‐stimuli responsiveness of dual‐mode mechanochromism (fluorescence red‐shift and RTP/DF on‐off switch) and reversible crystal‐state photochromism. This work may broaden the knowledge for stimuli‐responsive RTP organic molecules and lay the foundation for their wide‐scale applications.     

A Red‐Emissive Sextuple Hydrogen‐Bonding Self‐Assembly Molecular Duplex Bearing Perylene Diimide Fluorophores for Warm‐White Organic Light‐Emitting Diode Application

A novel sextuple hydrogen‐bonding (HB) self‐assembly molecular duplex bearing red‐emitting perylene diimide (PDI) fluorophores, namely PDIHB , was synthesized, and its molecular structure was confirmed by ¹H NMR, ¹³C NMR, TOF‐MS and 2D NMR. Compared with the small molecular reference compound PDI , PDIHB shows one time enhanced fluorescence efficiency in solid state (4.1% vs. 2.1%). More importantly, the presence of bulky HB oligoamide strands in PDIHB could trigger effective spatial separation between guest and host fluorophores in thin solid film state, hence inefficient energy transfer occurs between the blue‐emitting host 2TPhNIHB and red guest PDIHB in the 2 wt% guest/host blending film. As a result, a solution‐processed organic light‐emitting diode (OLED) with quite simple device structure of ITO/PEDOT:PSS (40 nm)/PVK (40 nm)/ PDIHB (2 wt%): 2TPhNIHB (50 nm)/LiF (0.8 nm)/Al (100 nm) could emit bias‐independent warm‐white electroluminescence with stable Commission Internationale de L'Eclairage coordinates of (0.42, 0.33), and the maximum brightness and current efficiency of this device are 260 cd·m^?2 and 0.49 cd·A^?1, respectively. All these results indicated that HB self‐assembly supramolecular fluorophores could act as prospective materials for white OLED application.     

Subdiffraction‐Resolution Fluorescence Microscopy of Myosin–Actin Motility

Subdiffraction‐resolution imaging by subsequent localization of single photoswitchable molecules can achieve a spatial resolution in the range of ～20 nm with moderate excitation intensities, but have so far been too slow for imaging faster dynamics in biology. Herein, we introduce a novel approach for video‐like subdiffraction microscopy based on rapid and reversible photoswitching of commercially available organic carbocyanine fluorophores. With the present concept, we demonstrate in vitro studies on the motility of fluorophore‐labeled actin filaments along myosin II. Actin filaments were densely labeled with carbocyanine fluorophores, and the gliding velocity adjusted by the concentration of ATP. At imaging frame rates of ～100 Hz, only 100 consecutive frames are sufficient to generate a single high‐resolution image of moving actin filaments with a lateral resolution of ～30 nm. A video‐like sequence is generated from individual reconstructed images by additionally applying a sliding window algorithm. We measured velocities of individual actin filaments of up to ～0.18 μm s^?1, observed strong bending and disruption of filaments as well as locally immobile fragments.     

Highly Water‐Dispersible Surface‐Modified Gd2O3 Nanoparticles for Potential Dual‐Modal Bioimaging

Water‐dispersible and luminescent gadolinium oxide (GO) nanoparticles (NPs) were designed and synthesized for potential dual‐modal biological imaging. They were obtained by capping gadolinium oxide nanoparticles with a fluorescent glycol‐based conjugated carboxylate (H L ). The obtained nanoparticles (GO‐ L ) show long‐term colloidal stability and intense blue fluorescence. In addition, L can sensitize the luminescence of europium(III) through the so‐called antenna effect. Thus, to extend the spectral ranges of emission, europium was introduced into L‐ modified gadolinium oxide nanoparticles. The obtained Eu^III‐doped particles (Eu:GO‐ L ) can provide visible red emission, which is more intensive than that without L capping. The average diameter of the monodisperse modified oxide cores is about 4 nm. The average hydrodynamic diameter of the L ‐modified nanoparticles was estimated to be about 13 nm. The nanoparticles show effective longitudinal water proton relaxivity. The relaxivity values obtained for GO‐ L and Eu:GO‐ L were r₁=6.4 and 6.3 s^?1 mM ^?1 with r₂/r₁ ratios close to unity at 1.4 T. Longitudinal proton relaxivities of these nanoparticles are higher than those of positive contrast agents based on gadolinium complexes such as Gd‐DOTA, which are commonly used for clinical magnetic resonance imaging. Moreover, these particles are suitable for cellular imaging and show good biocompatibility.     

Ultrasound/Optical Dual‐Modality Imaging for Evaluation of Vulnerable Atherosclerotic Plaques with Osteopontin Targeted Nanoparticles

Because of the high mortality of coronary atherosclerotic heart diseases, it is necessary to develop novel early detection methods for vulnerable atherosclerotic plaques. Phenotype transformation of vascular smooth muscle cells (VSMCs) plays a vital role in progressed atherosclerotic plaques. Osteopontin (OPN) is one of the biomarkers for phenotypic conversion of VSMCs. Significant higher OPN expression is found in foam cells along with the aggravating capacity of macrophage recruitment due to its arginine‐glycine‐aspartate sequence and interaction with CD44. Herein, a dual‐modality imaging probe, OPN targeted nanoparticles (Cy5.5‐anti‐OPN‐PEG‐PLA‐PFOB, denoted as COP‐NPs), is constructed to identify the molecular characteristics of high‐risk atherosclerosis by ultrasound and optical imaging. Characterization, biocompatibility, good binding sensibility, and specificity are evaluated in vitro. For in vivo study, apolipoprotein E deficien (ApoE^?/?) mice fed with high fat diet for 20–24 weeks are used as atherosclerotic model. Ultrasound and optical imaging reveal that the nanoparticles are accumulated in the vulnerable atherosclerotic plaques. OPN targeted nanoparticles are demonstrated to be a good contrast agent in molecular imaging of synthetic VSMCs and foam cells, which can be a promising tool to identify the vulnerable atherosclerotic plaques.     

Dual‐Targeting Dual‐Action Platinum(IV) Platform for Enhanced Anticancer Activity and Reduced Nephrotoxicity

A novel and highly efficient dual‐targeting platform was designed to ensure targeted in vivo delivery of dual‐action Pt^IV prodrugs. The dual targeting was established by liposomal encapsulation of Pt^IV complexes, thereby utilizing the enhanced permeability and retention (EPR) effect as the first stage of targeting to attain a high accumulation of the drug‐loaded liposomes in the tumor. After the release of the Pt^IV prodrug inside cancer cells, a second stage of targeting directed a portion of the Pt^IV prodrugs to the mitochondria. Upon intracellular reduction, these Pt^IV prodrugs released two bioactive molecules, acting both on the mitochondrial and on the nuclear DNA. Our Pt^IV system showed excellent activity in vitro and in vivo, characterized by a cytotoxicity in a low micromolar range and complete tumor remission, respectively. Notably, marked in vivo activity was accompanied by reduced kidney toxicity, highlighting the unique therapeutic potential of our novel dual‐targeting dual‐action platform.     

Fluorescence Quenching over Short Range in a Donor‐DNA‐Acceptor System

A new donor‐DNA‐acceptor system has been synthesized containing Nile red‐modified 2′‐deoxyuridine as charge donor and 6‐N,N‐dimethylaminopyrene‐modified 2′‐deoxyuridine as acceptor to investigate the charge transfer in DNA duplexes using fluorescence spectroscopy and time‐resolved femtosecond pump‐probe techniques. Fluorescence quenching experiments revealed that the quenching efficiency of Nile red depends on two components: 1) the presence of a charge acceptor and 2) the number of intervening CG and AT base pairs between donor and acceptor. Surprisingly, the quenching efficiency of two base pairs (73 % for CG and the same for AT) is higher than that for one base pair (68 % for CG and 37 % for AT), while at a separation of three base pairs less than 10 % quenching is observed. A comparison with the results of time‐resolved measurements revealed a correlation between quenching efficiency and the first ultrafast time constant suggesting that quenching proceeds via a charge transfer from the donor to the acceptor. All transients are satisfactorily described with two decays: a rapid charge transfer with 600 fs (～10¹² s^?1) that depends strongly and in a non‐linear fashion on the distance between donor and acceptor, and a slower time constant of a few picoseconds (～10¹¹ s^?1) with weak distance dependence. A third time constant on a nanosecond time scale represents the fluorescence lifetime of the donor molecule. According to these results and time‐dependent density functional theory (TDDFT) calculations a combination of single‐step superexchange and multistep hopping mechanisms can be proposed for this short‐range charge transfer. Furthermore, significantly less quenching efficiency and slower charge transfer rates at very short distances indicate that the direct interaction between donor and acceptor leads to a local structural distortion of DNA duplexes which may provide some uncertainty in identifying the charge transfer rates in short‐range systems.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.