同时蒸馏萃取-气相色谱/质谱法分析烟草中挥发性成分

本文对云南12种烟叶中挥发性成分进行提取分离,气相色谱/质谱测定.系统地对同时蒸馏萃取条件和色谱分离条件进行优化,结合谱库检索和匹配度定性方法鉴定149种化合物,并对其中的35种重要香气成分进行了定量分析,包括酮类7种、醇类6种、烯烃类4种、烟碱类3种、烷烃类2种、醛类2种、酯类2种、呋喃类2种等.该方法具有81.09％～97.45％的高回收率.结果表明,同时蒸馏萃取集采样、萃取、浓缩于一体,操作简单快速,适合于烟草中挥发性成分的提取,结合气相色谱/质谱联用仪(GC-MS)分离测定,能准确对挥发性成分进行定性和定量分析.     

热重-气相色谱/质谱联用方法鉴别回收油

建立了热重-气相色谱/质谱联用分析检测技术,结合主成分分析化学计量学方法,实现了回收油与正常食用油的辨别.以氧气为反应气,在50℃～400℃范围内,进行了经过确认的9个不同来源的回收油样品和大豆油、花生油、菜籽油和橄榄油等4类正常食用油的热重分析,采集300℃下氧化挥发成分进行气相色谱/质谱分析,定性确认了9种挥发性成分,分别为正庚烷、辛烯、正辛烷、正己醛、壬烷、正庚醛、癸烷、辛醛和壬醛.采用主成分分析方法,分别对热重分析数据、气相色谱/质谱分析数据和两组数据共同分析,结果表明,仅采用单独一种分析技术均不能实现回收油的有效鉴别,但是结合两组数据进行主成分分析能够实现全部9种回收油与正常食用油的区分,体现出联用技术可获取多信息的优势.本方法无需样品预处理、操作简单、样品量少、速度快,在回收油筛查中具有较好的应用前景.     

Pd/Mn/Ba/Al催化剂的NOx存储-还原性能研究

采用分步等体积浸渍法制备了Pd/Mn/Ba/Al系列催化剂,并用DRIFTS、TPD、TPSR等方法进行了表征,考察了催化剂在不同温度点NOx的存储量以及存储-还原循环中NOx的脱除率.结果表明,NO更容易在MNOx上形成亚硝酸盐,Mn的加入显著提高了Pd/Ba/Al的低温存储活性,与Pd/Ba/Al相比,Pd/Mn/...     

2-氨基-3-硝基吡啶和2-氨基-5-硝基吡啶的EI/MS/MS分析

2 氨基 3 硝基吡啶和2 氨基 5 硝基吡啶的一级质谱图接近,单纯通过一级质谱图较难区分这两种异构体,利用离子阱质谱的串联质谱技术对2 氨基 3 硝基吡啶和2 氨基 5 硝基吡啶在离子阱内以He作碰撞气进行碰撞诱导裂解,所得的二级质谱图表明,两者之间存在明显的差别,可用于2 氨基 3 硝基吡啶和2 氨基 5 硝基吡啶的鉴别。     

中国南海海绵Cinachyrella australiensis中(3E)-胆甾-4-烯-3,6-二酮-3-肟的结构鉴定

从南中国海海绵Cinachyrella australiensis的乙酸乙酯萃取部分分离出一个结构特别的甾体化合物, 应用UV, IR, MS, ¹H NMR, ¹³C NMR, DQCOSY, NOESY, TOCSY, HMQC和HMBC等光谱分析技术, 确定它为(3E)-胆甾-4-烯-3,6-二酮-3-肟(1). 化合物1为新天然甾体化合物, 通过生理活性实验表明其对乙肝病毒Hep G2细胞有较强的细胞毒活性. 本文对其波谱数据作了详细报道.     

顶空固相微萃取-气相色谱-质谱分析发酵香肠挥发性成分

采用固相微萃取-气相色谱-质谱(SPME-GC-MS)联用分析技术对发酵香肠挥发性成分进行了分析。共鉴定了33种化合物。结果表明，发酵香肠的挥发性成分主要为醇类、酮类、酯类、有机酸类、酚类及醛类等。     

艾叶挥发性成分的提取及其化学成分的气相色谱/质谱分析

采用常温下氮气吹扫－固体吸附剂吸附和水蒸汽蒸饱辆途中方法,提慑富集区叶的近轨必成分,经气相色谱－质谱联机分析,鉴定出３９种化合物,主要是１,８－桉树脑、异蒿属（甲）酮、２－莰酮、２－莰酮、石竹烯、α－荜澄茄烯等。     

顶空固相微萃取-气相色谱/质谱联用法结合化学计量学分析白肋烟烘焙前后挥发性、半挥发性成分

采用顶空固相微萃取-气相色谱/质谱法（HS-SPME-GC/MS）分析了白肋烟烟叶中挥发性、半挥发性成分。20 mg烟粉在60℃条件下孵化8 min,采用聚二甲基硅氧烷/二乙烯基苯（PDMS/DVB）65 μm纤维头萃取40 min,然后在250℃解吸3 min,通过与标准品和质谱数据库进行比对,初步定性了白肋烟烟叶中122种挥发性、半挥发性成分,并采用内标法进行半定量分析。通过主成分分析（PCA）和偏最小二乘-判别分析（PLS-DA）等化学计量学方法,直观反映了白肋烟烘焙前后挥发性、半挥发性成分的变化。该方法具有样品用量小、前处理简单、灵敏度高等特点,结合化学计量学方法可用于白肋烟烘焙前后化学成分变化分析,为白肋烟烘焙条件的优化提供了科学的检测方法。     

Ag/AgCl/铁-海泡石异相可见光Fenton催化降解双酚A

光-Fenton技术是高级氧化技术中的一种,常用于难降解废水处理,由于其反应速度快、毒性低、反应条件温和而受到广泛关注.然而,传统的光-Fenton体系具有可见光利用率低、回收困难等缺点.为了解决这些问题,本文采用廉价易得、无污染、吸附能力强的天然矿物海泡石作为催化剂载体,并利用Ag/AgCl能够吸收可见光的表面等离子响应这一光学性质,合成了一种有潜力的非均相等离子体光催化剂Ag/AgCl/铁-海泡石催化剂(Ag/AgCl/Fe-S),并对该催化剂的形貌结构、性能和机理等进行了系统研究.通过XRD,SEM,XPS,BET,UV-vis等表征手段对催化剂形貌、结构和可见光性能进行了分析.其中,XRD和SEM结果显示,Ag/AgCl粒子已经成功负载在Fe-海泡石上;XPS结果显示,铁氧化物的组成主要为FeOOH和Fe2O3;UV-vis结果显示,催化剂有较好的可见光吸收性能.以双酚A为目标污染物,分别考察了Ag/AgCl/Fe-S,Ag/AgCl和Fe-海泡石的光-Fenton催化性能.结果显示,Ag/AgCl/Fe-S降解双酚A的效果明显优于另外两种催化剂,在H2O2浓度为6mmol/L,pH为4,光照强度500W,Ag/AgCl/Fe-S催化剂量为1.0 g/L,双酚A初始浓度为10 mg/L的条件下,1 h时,双酚A基本被完全降解,且3 h时,其矿化率达到61.2%;而Ag/AgCl和Fe-海泡石催化剂在同样的条件下完全降解双酚A至少要3 h,且其矿化率分别只有46.61%和28.85%.另外,还分别探讨了H2O2浓度、pH值、光照强度和催化剂剂量对双酚A降解的影响.最后,通过活性物种捕获、ESR、电化学和PL实验对该体系的反应机理进行了探讨.活性物种捕获实验和ESR实验结果表明,羟基自由基(?OH)和空穴(h+)是该体系中的主要活性物种,且Ag/AgCl/Fe-S+H2O2+vis体系产生的?OH明显多于Fe-S+H2O2+vis体系.为了探讨?OH增多的原因,我们进行了电化学实验和PL实验.电化学实验结果显示,Ag/AgCl/Fe-S催化剂具有更低的阻抗,因此有利于电子-空穴分离.PL结果显示,Ag/AgCl/Fe-S催化剂的电子-空穴复合率更低.结合以上实验,我们提出了Ag/AgCl/Fe-S+H2O2+vis体系对双酚A的降解机理,即一方面催化剂能够发生Fenton反应而产生?OH,另一方面,催化剂中的Ag/AgCl在可见光下由于表面等离子响应而产生电子-空穴,空穴本身可作为活性物种降解双酚A.同时,产生的电子被体系中的Fe3+捕获生成Fe2+,从而促进了铁循环,有利于体系中产生更多的?OH.最后,空穴和羟基自由基发生协同作用共同促进污染物降解.     

部分水解法制备高分子量水溶性(丙烯酰胺/丙烯酸/2-丙烯酰胺-2-甲基丙磺酸)三元共聚物

系列的高分子量水溶性丙烯酰胺 /丙烯酸 /2 丙烯酰胺 2 甲基丙磺酸 (AM/AA/AMPS)三元共聚物(P3A)由相应的 (AM/AMPS)二元共聚物通过部分水解方法制得 .聚合物的结构和组成使用电位滴定和13 C NMR谱测定 ,得到的结果指出 ,在设定的试验条件下 ,水解过程中 ,高分子链上AMPS单元具有充分的稳定性 ,而丙烯酰胺基平稳地转变为丙烯酸 .在所有不同聚合物 (P2A)情况下 ,由于阴离子基团和OH-离子的静电相斥作用 ,酰胺基的水解反应均遵循自动减缓动力学的模式 ,同时 ,最后反应转化率趋向极限 ,AM剩余值位于 3 0mol%左右 ,另外对各种三元共聚物 (P3A)的溶液特性粘数和组成的关系亦作了详细的研究 .     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Oxygen defect K2NiF4-type oxides: The compounds La2−xSrxCuO4−x2+δ

Oxygen defect K₂NiF₄-type oxides $\text{La}{}_{\mathrm{2?x}}\text{Sr}{}_{\mathrm{x}}\text{CuO}{}_{\mathrm{<mtext>4?</mtext><mtext>x</mtext><mtext>2</mtext><mtext>+\delta </mtext>}}$ have been synthesized for a wide composition range: 0 ≤ x ≤ 1.34. From the X-ray and electron diffraction study three domains have been characterized: orthorhombic compounds with La₂CuO₄ structure for 0 ≤ x < 0.10, tetragonal oxides similar to LaSrCuO₄ for 0.10 ≤ x < 1 and several superstructures derived from the tetragonal cell ( with n = 3, 4, 4.5, 5, 6) for 1 ≤ x ≤ 1.34. The compounds corresponding to 0 < x < 1 differ from the other oxides in that they are characterized by the presence of copper with two oxidation states: + 2 and + 3. A model structure for La_0.8Sr_1.2CuλO_3.4, in which copper has only the + 2 oxidation state, and for which the actual cell is tegragonal—a = 18.80₄ Å and c = 12.94 Å—has been established. The particular structural evolution of these compounds is discussed in terms of a competition between the capability of Cu(II) to be oxidized to Cu(III) and the ordering of oxygen vacancies.     

A study of the spinel materials LiTi2O4 and Li43Ti53O4 by photoelectron spectroscopy

HeI-excited valence-band ultraviolet photoelectron spectra and MgKα-excited Ti-2p X-ray photoelectron spectra are reported for the spinel materials LiTi₂O₄ and $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4$. The presence of a Fermi edge in the ultraviolet photoelectron spectrum of LiTi₂O₄ confirms the metallic nature of this material, although the measured density of states at the Fermi energy is much lower than that expected from an independent-electron interpretation of the magnetic susceptibility. This difference is attributed to a strong interaction of the conduction electrons with the lattice vibrations. The localization of conduction electrons that occurs in the final state in the Ti-2p X-ray photoelectron spectrum of LiTi₂O₄ is attributed to a Coulomb interaction with a core hole.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.