Molecular behavior and synergistic effects between sodium dodecylbenzene sulfonate and Triton X-100 at oil/water interface

Significant synergistic effects between sodium dodecylbenzene sulfonate (SDBS) and nonionic nonylphenol polyethylene oxyether, Triton X-100 (TX-100), at the oil/water interface have been investigated by experimental methods and computer simulation. The influences of surfactant concentration, salinity, and the ratio of the two surfactants on the interfacial tension were investigated by conventional interfacial tension methods. A dissipative particle dynamics (DPD) method was used to simulate the adsorption properties of SDBS and TX-100 at the oil/water interface. The experiment and simulation results indicate that ultralow (lower than 10(-3) mN m(-1)) interfacial tension can be obtained at high salinity and very low surfactant concentration. Different distributions of surfactants in the interface and the bulk solution corresponding to the change of salinity have been demonstrated by simulation. Also by computer simulation, we have observed that either SDBS or TX-100 is not distributed uniformly over the interface. Rather, the interfacial layer contains large cavities between SDBS clusters filled with TX-100 clusters. This inhomogeneous distribution helps to enhancing our understanding of the synergistic interaction of the different surfactants. The simulation conclusions are consistent with the experimental results.     

烷基苯磺酸盐在油水界面行为的介观模拟

采用耗散颗粒动力学(DPD)方法在介观层次上模拟了表面活性剂烷基苯磺酸盐在油/水界面的排布行为, 考察了分子结构、浓度、盐度、油相等因素对表面活性剂界面密度和界面效率的影响, 并探讨了利用表面活性剂复配协同效应提高界面活性的理论机制. 分子模拟给出的分子水平的微观信息为强化采油技术中配方筛选和表面活性剂的有效应用提供指导.     

Dilational viscoelasticity of anionic polyelectrolyte/surfactant adsorption films at the water–octane interface

In this article, the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water–octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. Polystyrene sulfonate sodium (PSS)/cationic surfactant hexadecanetrimethyl–ammonium bromide systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be explained well by electrostatic interaction. In the case of PSS/anionic surfactant sodium dodecyl sulfate (SDS) systems, the coadsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational elasticity. For PSS/nonionic surfactant TX100 systems, PSS may form a sub-layer contiguous to the aqueous phase with partly hydrophobic polyoxyethylene chain of TX100, which has little effect on the TX100 adsorption film and interfacial tension.     

Study of surfactant-polymer system containing a novel ternary sulfonated polyacrylamide on the oil-water interface properties

A novel ternary sulfonated polyacrylamide was synthesized using 2,2′-azobis[2- methylpropionamidine] dihydrochloride and redox initiation system as initiator, respectively. The competitive adsorption of the ternary sulfonated polyacrylamide (TSPAM) and sodium dodecyl benzene sulfonate (SDBS) on the oil-water interface was investigated by equilibrium interfacial tension, interfacial viscoelasticity, zeta potendial and interfacial film strength. The SDBS molecules in the surfactant-polymer (SP) system preferentially adsorb on the oil-water interface due to the amphiphilic structure of the SDBS molecules. Electrostatic force between the charged groups of the polyacrylamide and the head groups of surfactant adsorbed on the interface in the SP system leads to the formation of the complex interface film, which is helpful to enhance the stability of the oil-water interface. The ternary sulfonated polyacrylamide (TSPAM) has a similar influence on the other interface properties with SDBS except the interfacial tension. The interfacial tension decreases and then increases with increasing of the TSPAM concentration due to the competitive adsorption of the TSPAM molecules and the SDBS molecules on the oil-water interface. Moreover, TSPAM has the more influence on the stability of oil-water interface than partially hydrolyzed polyacrylamide (HPAM) in the SP system, and the addition of TSPAM is better to improve the stability of emulsion in the SP flooding.     

Effect of sodium dodecyl benzene sulfonate to the displacement performance of hyperbranched polymer

Experimental studies were conducted to realize displacement performance effect of anionic surfactant sodium dodecyl benzene sulfonate (SDBS) on hyperbranched poly(AM/AA/AMPS/GA), which was successfully synthesized via free radical polymerization using modified dendritic functional monomer (GA), acrylamide (AM), acrylate (AA), and 2-acrylamido-2-methyl propane sulfonic acid (AMPS). Compared with individual polymer, SP (surfactant polymer) binary systems showed lower apparent viscosity, interfacial tension, and hydrodynamic radius as the result of the electrostatic repulsion between the tail end of hydrophilic polymer branched chain and the head of the surfactant. It was found from abundant static adsorption and dynamic retention tests that the values of static adsorption and dynamics retention of SDBS which is mixed with hyperbranched polymer decrease due to the competitive interaction. However, unlike this phenomenon, SDBS would heighten the dynamic retention value of poly(AM/AA/AMPS/GA), resulting in addition of residual resistance factor. Oil displacement experiment indicated that SP solutions have greater capability of enhance oil recovery than individual polymer under same conditions.     

油/水界面表面活性剂的复配协同机制

采用耗散颗粒动力学(DPD)方法模拟了椰油酸二乙醇酰胺(6501)分别与十二烷基-α-烯烃磺酸钠(DAOS)、椰油酰胺丙基二甲基甜菜碱(CAB)和十二烷基苯磺酸钠(SDBS)复配体系中表面活性剂在油/水界面的排布行为, 探讨了盐度及分子结构对单一和复配表面活性剂界面活性的影响, 从界面效率、界面密度和分子排布等角度讨论了油水界面表面活性剂混合体系的复配协同增效机制.     

Effect of Molecular Weight on the Interfacial Dilational Viscoelasticity of Anionic Polyelectrolyte/Surfactant Systems

In this article, the effect of molecular weight on the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water-octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. PSS/cationic surfactant CTAB systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be well explained by electrostatic interaction. Molecular weight of PSS plays a crucial role in the nature of adsorption film. The complex formed by CTAB and higher molecular weight PSS, which has larger dimension and stronger interaction, results in higher dilational modulus at lower surfactant bulk concentration. In the case of PSS/anionic surfactant SDS systems, the co-adsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational modulus at lower surfactant bulk concentration. For PSS/nonionic surfactant T × 100 systems, PSS may form a sublayer contiguous to the aqueous phase, which has little effect on interfacial tension but slightly decreases dilational modulus.     

表面活性剂对驱油聚合物界面剪切流变性质的影响

利用双锥法研究了表面活性剂十二烷基苯磺酸钠(SDBS)和十六烷基三甲基溴化铵(CTAB)对油田现场用部分水解聚丙烯酰胺(PHPAM)和疏水改性聚丙烯酰胺(HMPAM)溶液的界面剪切流变性质的影响,实验结果表明:HMPAM分子通过疏水作用形成界面网络结构,界面剪切复合模量明显高于PHPAM.SDBS和CTAB通过疏水相互作用与HMPAM分子中的疏水嵌段形成聚集体,破坏界面网络结构,剪切模量随表面活性剂浓度增大明显降低.同时,界面膜从粘性膜向弹性膜转变.低SDBS浓度时,少量SDBS分子与PHPAM形成混合吸附膜,界面膜强度略有升高;SDBS浓度较高时,界面层中PHPAM分子被顶替,吸附膜强度开始减弱.阳离子表面活性剂CTAB通过静电相互作用中和PHPAM分子的负电性,造成聚合物链的部分卷曲,从而降低界面膜强度.弛豫实验结果证实了表面活性剂破坏HMPAM网络结构的机理.     

Experimental Study of the Effect of Strong Alkali on Lowering the Interfacial Tension of Oil/Heavy Alkylbenzene Sulfonates System

Experimental studies were conducted to explore the fundamental mechanisms of alkali to lower the interfacial tension of oil/heavy alkylbenzene sulfonates (HABS) system. Sodium hydroxide was used as the strong alkali chemical to investigate the interfacial tension (IFT) of oil/HABS system. The influences of salt and alkali on the interfacial activity were studied by the measurement of interfacial tension and partition coefficient. Moreover, the alkali/surfactant solutions were measured by dynamic laser scattering. The results showed that compared with the salt, the function of alkali to lower the interfacial tension and improve partition coefficient is more significant. The micelles formed by surfactants could be disaggregated because of adding alkali, so the size of micelles decreases and the number of mono‐surfactants increases, then more surfactant molecules move to the interface of oil/surfactant system and the adsorption of surfactants at oil‐water interfaces increases, which can lead to the decrease of IFT.     

A critical and comprehensive assessment of interfacial and bulk properties of aqueous binary mixtures of anionic surfactants, sodium dodecylsulfate, and sodium dodecylbenzenesulfonate

The micellization of mixed binary surfactant systems of sodium dodecylsulfate (SDS) and sodium dodecylbenzenesulfonate (SDBS) has been studied by conductometry, tensiometry, fluorimetry, and microcalorimetry at different mole fractional compositions. The counter-ion binding of micelles, micellar aggregation number, thermodynamics of micellization, interaction of components in the mixed micelles, and their compositions therein and amphiphile packing in micelles have been examined. The adsorption features of the surfactants at the air/solution interface have also been estimated. Correlation of the results and explanations of the findings have been presented. The difference in the head groups of SDS and SDBS has manifested interesting solution and interfacial behaviors.     

阴离子表面活性剂在油水界面聚集的分子动力学模拟

用分子动力学方法模拟了油、水和阴离子表面活性剂组成的混合溶液从初始“均相”到“油水两相”分离的动力学过程, 研究了十二烷基苯磺酸钠(SDBS)在界面分离过程中的作用. 模拟发现, 油水两相能够在短时间内分离达到平衡, 形成一个明显的油水界面; 在SDBS存在情况下, 油水界面的分离时间随着SDBS浓度的增加逐渐增加, 达到平衡时SDBS会在界面处形成一个明显的界面膜, 并对油水界面处的水分子有限制作用. 模拟表明, 分子动力学方法可以作为实验的一种补充, 为实验提供必要的微观分子结构信息.     

多元体系油水界面上常见表面活性剂行为的分子动力学模拟

采用分子动力学模拟研究了以十二烷基苯磺酸钠(SDBS)为代表的阴离子型表面活性剂,以十二烷基三甲基溴化铵(DTAB)为代表的阳离子型表面活性剂,以壬基酚聚氧乙烯醚(NPE)为代表的非离子型表面活性剂,以十二烷基二甲基甜菜碱(Betaine)为代表的两性表面活性剂及空白实验.模拟了表面活性剂在油水界面上的行为,考察了表面活性剂分子与石油分子之间的径向分布函数(RDF)、石油分子在竖直方向的均方位移(MSD)、油水界面张力(IFT)、石油层与岩石层之间的相互作用能、石油层的相对浓度在竖直方向的分布及石油分子质心位置随模拟时间的变化关系等,讨论了不同表面活性剂的洗油性能.结果表明:(1)SDBS,NPE和Betaine分子初始状态下呈近似的规律排列,非极性端部分插入油相中,极性端延伸进入水相中;随后表面活性剂的极性端表现出聚集趋势,逐渐形成一个外部亲油内部亲水的一个胶束状粒子,粒子随模拟的进行逐渐融入到油层当中;DTAB从开始的近似规则排列逐渐变为无规排列,但是始终保持亲油端插入到油相中,亲水端位于油水界面上.(2)表面活性剂分子与石油分子之间的相互作用强弱顺序为Betaine≈DTABSDBSNPE.(3)由质心高度和动力过程中的图像截图分析,表面活性剂洗油效果的顺序为BetaineSDBSNPEDTABNone.模拟结果与实际的驱油结果一致,从分子层面上解释了不同表面活性剂洗油的规律.     

STUDY OF DEMULSIFICATION OF WATER-IN-CRUDE OIL EMULSION

Demulsification of water-in-crude oil emulsion was studied at two different salinities, 0.5% and 10% sodium chloride, using five different nonionic surfactants. Equilibrium crude oil-water interfacial tension was measured with drop volume method. Low molecular weight surfactants were found to be completely ineffective as demulsifiers. Three surfactants which were effective demulsifiers, exhibited good interfacial activity, surface adsorption and surface pressure. The performance of the demulsifiers changed with change in salinity of aqueous phase. Surfactants effective as demulsifiers reduced surface tension of water by more than 25 dynes-cm^-1. For a given crude oil-water system, the surfactant which developed surface pressure in excess of 15 dynes-cm^-1 was found to be good demulsifier for that system. Based upon these studies, a physical model of demulsification has been proposed     

Effect of solid walls on spontaneous wave formation at water/oil interfaces

The regulation of spontaneous waves at water/oil interfaces was investigated, focusing on effects of materials and sizes of containers. Trimethylstearylammonium chloride was dissolved in an aqueous phase. Nitrobenzene with potassium iodide and iodine was used as an organic phase. Rotation of interfacial waves with almost triangular shape was observed only in containers made of glass. The nature of interfacial waves is sensitive to container size. There was no interfacial wave in PFA (Teflon) containers. However, when a glass plate was soaked vertically to the interface, oscillation of contact angles of water/oil interfaces to glass plates was observed. The oscillation generated wave propagation along the plate. Dynamic interfacial tension was measured by Wilhelmy method and the pendant drop technique. Results with the Wilhelmy method in small glass containers exhibited spontaneous oscillation. However, oscillations in dynamic interfacial tension were not observed for other cases, i.e., the Wilhelmy method for large glass containers, for PFA containers, and for the pendant drop technique. It was concluded that all nonlinear behavior such as wave generation and apparent tension oscillation could be attributed to the effect of the sidewalls of container on the adsorption/desorption kinetics of the surfactant. We propose a possible scenario which can explain all of the qualitative features of the present experimental findings.     

Interfacial dilational behaviour of adsorbed β-lactoglobulin layers at the different fluid interfaces

β-Lactoglobulin adsorption layers at the interfaces solution/air, /tetradecan and /sunflower oil were characterised by dynamic interfacial tension measurements and harmonic drop oscillation experiments in a time scale of some seconds. Axialsymmetric drop shape analysis (ADSA) was used to calculate drop volume, area and interfacial tension. Within a definite range of drop volume amplitude, the oscillation of the surface tension is harmonic and interfacial dilation parameters can be determined. Dependence of the dilational parameters on the amplitude and frequency of drop volume oscillation were determined and methodical demands are given for this special kind of ADSA application. The concentration of interfacial saturation is minimal at the interface with sunflower oil. Interfacial dilational elasticities, and viscosities are maximal at the saturation concentration of all systems investigated. The dilational viscosities are maximal in the frequency range 0.007–0.011 Hz and characterise molecular rearrangement processes in the adsorption layer. Interfacial dilational elasticity and viscosity are the largest at the interface with air. They are the smallest at the interface with sunflower oil. Similarities and differences of the systems investigated are discussed by taking into account the adsorption behaviour and the solvatation of different apolar and polar parts of the protein molecules in the neighbouring phase.     

Modeling of the adsorption kinetics of surfactants at the liquid-fluid interface of a pendant drop

This paper presents a theoretical model for simulating the adsorption kinetics of a surfactant at the liquid-fluid interface of a pendant drop. The diffusion equation is solved numerically by applying the semidiscrete Galerkin finite element method to obtain the time-dependent surfactant concentration distributions inside the pendant drop and inside the syringe needle that is used to form the pendant drop. With the obtained bulk surfactant concentration distributions, the adsorption at the interface is determined by using the conservation law of mass. It should be noted that the theoretical model developed in this study considers the actual geometry of the pendant drop, the depletion process of the surfactant inside the pendant drop, and the mass transfer of the surfactant from the syringe needle to the pendant drop. The present pendant-drop model is applied to study the adsorption kinetics of surfactant C10E8 (octaethylene glycol mono n-decyl ether) at the water-air interface of a pendant drop. The numerical results show that the Ward and Tordai equation, which was derived for adsorption from a semi-infinite surfactant solution to a planar interface, is unsuitable for interpreting the dynamic surface or interfacial tension data measured by using the pendant-drop-shape techniques, especially at low initial surfactant concentrations. The spherical-drop model, which assumes the pendant drop to be a perfectly spherical drop with the same drop volume, can be used to interpret the dynamic surface or interfacial tension data for pendant drops either with high initial surfactant concentrations or with low initial surfactant concentrations in short adsorption durations only. For pendant drops with low initial surfactant concentrations in long adsorption durations, the theoretical model developed in this study is strongly recommended.     

Interfacial tension in phase-separated aqueous cationic/anionic surfactant mixtures

Interfacial tensions in two aqueous phase-separated cationic/anionic surfactant mixtures, CTAB/AS and 12-3-12/AS, without and with NaBr added were determined by the spinning drop method at 318.15 K. CTAB, 12-3-12 and AS are the abbreviations for cetyltrimethylammonium bromide, 1,3-propanediyl-bis(dodecyldimethylammonium bromide) and sodium dodecyl sulfonate, respectively. The interfacial tension sigma was found to be in the range of 0.06-21 microNm(-1). Toward a better understanding of the influence of the concentration difference between the separated phases in aqueous two-phase systems (ATPS) to interfacial tension, compositions of equilibrium phases were determined by elemental analysis coupled with material balance and electroneutrality. The investigation indicates that the concentration differences of surfactant ions between the separated phases and the adsorption of surfactant ions at the interface are the decisive factors determining the magnitude of interfacial tension.     

阴离子表面活性剂在水/正烷烃界面的分子动力学模拟(英文)

利用分子动力学模拟方法研究了阴离子表面活性剂在水/正烷烃(壬烷,癸烷和十一碳烷)界面的结构和动力学特点.十六烷基苯磺酸钠作为研究对象,其中苯磺酸基团在十六碳烷的第4号碳原子上,记作4-C16.分析了不同油相和特定盐度条件下正烷烃-表面活性剂-水体系的界面特点(如密度剖面图、界面张力和径向分布函数).模拟结果表明平衡模型体系展现了一个很好的水/正烷烃界面.当加氯化钠到水溶液中,正烷烃-表面活性剂-水体系的界面张力有微小的变化,有趣的是表面活性剂二面角的反式结构分数的变化联系着界面张力的微小变化.可见,表面活性剂在界面处的结构对降低界面张力起到重要的作用.此外,还发现表面活性剂的极性头与钠离子和水分子存在较强的相互作用.     

Effect of Cationic and Zwitterionic Surfactants on Contact Angle of Quartz–Water–Crude Oil System

The influences of four cationic surfactants hexadecyl glycidyl ether ammonium chloride and four zwitterionic surfactants hexadecyl glycidyl ether glycine Betaine solutions on contact angle of crude oil on a quartz surface were investigated using a captive drop method. The effects of surfactant type, structure, and concentration on contact angle were expounded. From obtained results it appears that the adsorbed surfactant at oil–water interface reduces the interfacial tension and the adsorption at quartz–water interface improves interfacial free energy, which results in reducing the stable value of contact angle and weakening dynamic behavior. At high concentration, the zwitterionic surfactant with branched-chain may form semi-micelle at quartz surface. As a result, the stable value of contact angle passes through a sharp minimum with the increasing concentration.     

Triton X-100/甲苯/水三元体系界面张力的耗散颗粒动力学模拟

采用耗散颗粒动力学方法在介观层次上模拟了非离子表面活性剂Triton X-100 在油/水界面上的分布行为, 并把用于油/水二元体系界面张力的计算方法拓展到含表面活性剂的三元体系. 利用该方法可以得到与实验数值吻合的界面张力数据. 另外, 模拟结果直观展示了表面活性剂界面张力与界面密度的关系, 为表面活性剂复配增效理论提供了依据. 该模拟方法给出的微观信息可以为驱油体系配方筛选和表面活性剂有效应用提供指导.