Synthesis of 1,3-dialkylpyrazolo [1,5-a]-1,3,5-triazine-2,4-diones isomers of 1,3-dialkylxanthines

The synthesis of a new series of alkylxanthine analogs containing a bridgehead nitrogen atom is reported. 1,3-Dialkylpyrazolo[1,5-a]-1,3,5-triazine-2,4-diones, were prepared by the treatment of 3-methylpyrazolo[1,5-a]-1,3,5-triazine-2,4-dione (3) with the corresponding alkyl iodide. Similarly, the reaction of 3-methyl-7-phenylpyrazolo[1,5-a]-1,3,5-dialkyl-7-phenylpyrazolo[1,5-a]-1,3,5-triazine-2,4-diones. The starting materials, 3 and 17 , were prepared via the reaction of an appropriate 3-aminopyrazole with ethoxycarbonyl isothiocyanate. Several 8-bromo derivatives were prepared by direct bromination of the 1,3-dialkylpyrazolo[1,5-a]-1,3,5-triazine-2,4-diones.     

Reaction of 5-substituted-2-amino-2-oxazolines with ethoxycarbonyl isocyanate. A route to 2,3,6,7-tetrahydro-4H-oxazolo[3,2-a]-1,3,5-triazine-2,4-diones

The reaction of 2-amino-2-oxazolines with ethoxycarbonyl isocyanate was investigated in order to access to fused 1,3,5-triazine-2,4-diones with a potential 5-HT₂ antagonist activity. The reaction leads to 2,3,6,7-tetrahydro-4H-oxazolo[3,2-a]-1,3,5-triazine-2,4-diones and to 1-carbethoxy-3-(2-iminooxazolidine)ureas. During the carbamoylation the regioselectivity seems to be related to the strong nucleophilic character of the endo nitrogen atom of 2-amino-2-oxazolines. The structures of two compounds were studied by X-ray crystallography. N-Substituted compounds have been prepared by alkylation of the 2,3,6,7-tetrahydro-7-phenoxymethyl-4H-oxazolo[3,2-a]-1,3,5-triazine-2,4-dione.     

Dispersion polymerization of acrylamide: Part II. 2,2′‐Azobisisobutyronitrile initiator

Dispersion polymerization of acrylamide in tert‐butyl alcohol (TBA)‐water media (TBA ⩾ 50 vol %) using poly(vinyl methyl ether) (PVME) as the stabilizer and 2,2′‐azobisisobutyronitrile (AIBN) as the initiator at 50°C has been studied. The conversion‐time curve shows autoacceleration taking place from the very early stage of the reaction (measured from 4% conversion level). Molecular weight increases with conversion indicating that the gel effect is operative. This suggests that a major part (if not the whole) of the polymerization occurs in the particle phase. The effects of the concentrations of the stabilizer, the initiator, the monomer, and the solvent composition on particle size have been explained on the basis of particle phase polymerization. The feeding of the particles by the monomer presumably occurs through the solvent channels of the swollen particles. The swelling data of polyacrylamide films in various TBA‐water mixtures are given. The similarity and differences between the AIBN and ammonium persulfate (APS) initiated systems (published earlier by us) have been discussed. In general, particles are more polydisperse and bigger in the former case than in the latter. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 493–499, 1999     

Preparation of polyvinylpyrrodione microspheres by dispersion polymerization

The preparation of polyvinylpyrrolidone (PVP) microspheres in ethyl acetate by dispersion polymerization with N-vinylpyrrolidone (NVP) as initial monomer, poly(N-vinylpyrrolidone-co-vinyl acetate) (P (NVP-co-VAc)) as dispersant, and 2, 2′-azobisisobutyronitrile(AIBN) as initiator is reported. The influences of monomer concentration, dispersant concentration and initiator concentration on the size of PVP microspheres as well as the monomer conversion were studied. The structure and properties of PVP microspheres were analyzed. The results show that the prepared PVP microspheres have a mean diameter of 3-4 μm. With an increase in NVP concentration, the size and the molecular weight of the PVP microspheres as well as the monomer conversion all increase. With increasing P(NVP-co-VAc) concentrations, the PVP molecular weight and monomer conversion both increase while the size of the microspheres becomes smaller. As the concentration of AIBN increases, the microsphere size and monomer conversion increase whereas the PVP molecular weight decreases. The PVP prepared by dispersion polymerization has a crystal structure, and its molecular weight is lower compared to that prepared by solution polymerization. __________ Translated from Acta Polymerica Sinica, 2007, 11 (in Chinese)     

Study on the Kinetics of Polymerization of Tributyltin Methacrylate

The kinetics of polymerization of tributyltin methacrylate (TBTM) has been studied in benzene solution in the temperature range 60–75°C in the presence of azobisisobutyronitrile (AIBN). We have obtained the following polymerization rate equation: R _p = K _p [TBTM]^1.5 [AIBN]^0.5. It shows that the dependence of the polymerization rate on the concentrations of the monomer TBTM and the initiator AIBN are 1.5 and 0.5 order, respectively. The activation energy of polymerization was found to be 18.1 kcal/mol. The activation energy for the degree of polymerization is approximately -12.3 kcal/mol.     

Polymerization of 1,3,5-Tri(1,3,5,7-tetra)-methyl-1,3,5-tri(1,3,5,7-tetra)-10-carbomethoxydecylctri(tetra)siloxane

The cationic and anionic polymerization of 1,3,5-tri(1,3,5,7-tetra)methyl-1,3,5-tri (1,3,5,7-tetra)-10-carbomethoxydecylcyclotri (tetra) siloxane, catalyzed by sulfuric acid and alkali metal naphthalenes, respectively, was studied. With sulfuric acid the polymer yield increased with increasing catalyst concentration, while the molecular weights decreased. With potassium naphthalene the polymerization reaction was first order to monomer, and the molecular weights increased linearly with increasing the percent conversion in accordance with a “living” polymerization. In both cases the polymerization was an equilibrium reaction and the conversion was about 85%. Only low molecular weight polymers were obtained due to steric effects of the bulky long-chain substituents.     

Preparation and Free-Radical Polymerization of 2,4-Dichloro-6-(p-Vinylphenyl)-1,3,5-triazine as a Reactive Monomer Containing Two Replaceable Groups

Abstract

A new monomer containing two replaceable groups, 2,4-dichloro-6-(p-vinylphenyl)-1,3,5-triazine (DCVT) was prepared by the reaction of p-vinylphenylmagnesium chloride with cyanuric chloride. This monomer was polymerized readily in benzene by AIBN at 60°C. From the copolymerization with styrene, Q and e values of DCVT were obtained as Q = 2.42 and e = 0.08. An insoluble terpolymer prepared from DCVT, styrene, and divinylbenzene was treated with several nucleophilic reagents, including sodium methoxide, sodium methylmercaptide, dimethylamine, and triethylphosphite, to afford the corresponding polymers in high conversions.     

New polynitrogen hyperbranched polymers

A method for the preparation of new representatives of polynitrogen hyperbranched polymers of heterocyclic series was developed involving polymerization of monomeric 2,4-diazido-6-propynyloxy-1,3,5-triazine by 1,3-dipolar cycloaddition. Kinetics of polymerization of diazidoacetylene monomer was compared with the kinetic data of polymerization of its closest analog, 2-azido-4,6-bis(propynyloxy)-1,3,5-triazine monomer. Properties of hyperbranched poly(1,2,3-triazole-1,3,5-triazine)s with terminal azide groups and terminal triple bonds were compared, as well.     

2,4-双(三氯甲基)-6-(4-甲氧基-1-苯乙烯基)-s-三嗪光引发剂的合成与聚合动力学研究

本研究以4-甲氧基苯甲醛和2,4-双(三氯甲基)-6-甲-基1,3,5-三嗪为原料合成了一种引发剂2,4-双(三氯甲基)-6-(4-甲氧基-1-苯乙烯基)-s-三嗪(BMT),并利用红外光谱、紫外光谱、核磁共振等手段对其结构进行表征.利用实时红外光谱研究其光聚合动力学性能,结果表明,不同引发剂浓度,不同单体和不同光强对单体双键转化率都有一定的影响.     

Isomerism in metal complexes of 1,3,5-diazaphosphorinanes. Synthesis,crystal and molecular structure of conformers ofcis-bis(1,3,5-triphenyl-1,3,5-triazaphosphorinane)dichloroplatinum(II)

The crystal and molecular structures were determined for two individual conformers ofcis-bis(1,3,5-triphenyl-1,3,5-diazaphosphorinane)dichloroplatinum(II) differing in the rotation of the heterocyclic ligand planes around the P-Pt bond and in the orientation of the substituents at the phosphorus atoms in the ligands.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1650–1655, September, 1993.     

Synthesis of bicyclic 1,3,5-triazine-2,4(3H)-diones: Reaction of amidines with diphenyl iminodicarboxylate

The preparation of bicyclic 1,3,5-triazine-2,4(3H)-diones 3 has been investigated. Diphenyl iminodicarboxylate ( 2 ) reacted smoothly with cyclic amidines to give bicyclic triazinediones in good yields.     

Study on triazine thiols. VI. Selective graft copolymerization of MMA on modified copper plates

Graft copolymerization of MMA on copper surface which is initiated by Na₂S₂O₈ in an aqueous solution proceeded selectively when copper plates are modified by 6-unsaturated group-1,3,5-triazine-2,4-dithiol monosodium salts (UTD) and 6-dimethylamino-1,3,5-triazine-2,4-dithiol monosodium salt (DMTD). Grafting weight was influenced by the molar ratio of UTD to DMTD in the aqueous solution that copper plates are treated. The former on copper surface is a coupling component of MMA radicals and initiator radicals. The latter is a catalyst which accelerates the formation of radicals acting with Na₂S₂O₈. Selective graft copolymerization is due to the reason that radicals generate selectively in the neighborhood of copper surface and in this place there are monomers such as MMA and UTD.     

Dispersion copolymerization of styrene with vinylbenzyl-terminated polyoxyethylene macromonomer

Macromonomer with styrenic polymerizable group was synthetized by anionic polymerization of ethylene oxide initiated by potassium vinylbenzyl alcoholate. p-Vinylbenzyl-terminated polyoxyethylene macromonomer (PEO-VB) was then copolymerised with styrene in water/alcohol continuous phase. The resulting polymer is chiefly non soluble in that medium, and the final state is polymer particles in the range 500-1000 nm in diameter stabilized by a macromonomer-rich copolymer. The conversion time curve consists of three regions. The length of nucleation period was inversely proportional to the volume ratio ethanol/water (E/W). The dependence of the polymerization rate (R_p) vs. conversion is described by a curve with two-rate intervals. The rate of polymerization increased with increasing PEO-VB and initiator AIBN concentration but was nearly independent of the volume ratio E/W. The particle number slightly increased with increasing PEO-VB and AIBN concentration. The molecular weight of graft copolymer increased with increasing the volume fraction of water, PEO-VB and AIBN concentration.     

可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征     

Liposome formation of selectively-polymerized diene-containing phospholipids and their postpolymerization

Small and large unilamellar liposomes composed of 1,2-bis(2,4-octadecadienoyl)-sn-glycero-3-phosphorylcholine (DODPC) are prepared by sonication and extrusion, respectively. They are polymerized with water-insoluble radical initiator, azobis(isobutyronitrile) (AIBN) which can selectively polymerize diene groups in 1-acyl chains of the lipids. Polymerized liposomes are freeze-dried to obtain the polymerized liposome powder. There are two methods to redisperse lyophilized liposomes into water. The extrusion is an effective method to disperse them because the energy at extrusion is necessary only for redispersion, whereas the excess energy at sonication gives damage on liposome structure. There is no difference in stability between polymerized liposomes before and after redispersion with extrusion. DODPC polymers, obtained from free radical-initiated polymerization with AIBN, are linear and have polymerizable diene groups in 2-acyl chains. The liposome powder is therefore soluble in organic solvents. Reconstruction of polymerized liposomes is performed with lipid polymers having low or high molecular weight. The lipid polymers having high molecular weight provide stable large unilamellar liposomes by ethanol injection, but unstable small unilamellar liposomes are formed by sonication. The liposomes reconstructed from lipid polymers having low molecular weight are unstable regardless of their size. After reconstruction of liposomes selectively polymerized by AIBN, diene groups in 2-acyl chains are polymerized by water-soluble radical initiator or UV-irradiation to yield highly crosslinked structure. Their stability is improved remarkably by this postpolymerization.     

Effect of thiourea on the radical polymerization of vinyl monomers. Part II. Effect of diphenyl thiourea on the polymerization of methyl methacrylate with benzoyl peroxide as initiator

The polymerization of methyl methacrylate (MMA) initiated by benzoyl peroxide (BPO) in the presence of diphenyl thiourea (DPTU) has been studied. It was found that the BPO–DPTU catalyst system was not an effective accelerating system but showed a relatively strong retarding effect. With DPTU derivatives, the polymerization rate was found to decrease with the increase in the electron-attracting forces of substituents attached to the phenyl groups of DPTU. In the polymerization of MMA initiated by AIBN, the addition of DPTU to the reaction systems affected neither the polymerization rate nor the degree of polymerization. From this fact, it might be concluded that DPTU itself serves as a radical scavenger. It seems most probable from the results of kinetic studies, iodometric titration, and from the effect of an oxidation product of DPTU (diphenyl formamidine disulfide) that the retardation effect observed is attributable to the action of the disulfide (DPFDS). By extending the Alfrey-Price scheme for the copolymerization reactions to the chain-transfer reactions, the Q and e values of DPFDS were determined. The apparent chain-transfer constants for DPTU and its derivatives were calculated by means of rate measurements and were correlated with substituent constants. The mechanism of the polymerization is discussed on the basis of these results.     

On the low-lying excited states of sym-triazine-based herbicides.

We report a joint computational and luminescence study on the low-lying excited states of sym-triazines, namely, 1,3,5-triazine (1) and the ubiquitous herbicides atrazine [6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine (2)] and ametryn [6-methylthio-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine (3)]. Geometrical structures, energetics, and transition and state properties of I and 2 were computed at the TD-DFT, CASSCF, and CASPT2 levels of theory. The fluorescence and phosphorescence emission spectra, lifetimes, and fluorescence quantum yields were measured for the three compounds, and from these, the energies of the lowest excited states and their corresponding radiative rates were determined. The predictions from CASPT2 calculations are in good agreement with the experimental results obtained from the luminescence studies and allow the interpretation of different absorption and emission features.     

Studies on graft copolymerization onto cellulose derivatives. XXIX. Photo-induced graft copolymerization of methyl methacrylate onto chitin and oxychitin

Graft copolymerization of methyl methacrylate (MMA) onto chitin and oxidized chitin was carried out by a noncatalytic photo-induced and a photo-sensitized method. The isolation method of grafted chains without a decrease in their degree of polymerization (DP) by sulfuric acid hydrolysis and the effects of some factors on the conversion and the grafted chain length have been studied. In case of the photo-induced graft copolymerization, if a small amount of dimethylformaldehyde (DMF) is added in the polymerization system, the induction period is shortened and the degree of grafting and the apparent number of grafted chains increase. The degree of grafting and the apparent number of grafted chains of the oxidized chitin containing a small amount of C?O groups are greater than those of the untreated chitin, but a further increase in C?O groups decreases these values. In the presence of this two species of the chitin samples, the polymerization reaction was carried out as functions of monomer and chitin concentrations. From these results, the mechanisms of the photo-induced graft copolymerization were discussed. It is also clear that the conversion and the apparent number of grafted chains by the noncatalytic photo-induced method are generally larger than those by the photo-sensitized method, and the grafting activity with hydrogen peroxide (HPO) is higher than that with azobisisobutyronitrile (AIBN).     

Functional twin monomers and twin macro monomers as components for the synthesis of hierarchically nanostructured hybrid materials*

Internal polymeric soft templates are used for the polymerization of twin monomers (TM) to achieve nanostructured hybrid materials of desired morphology. For this purpose, oligomeric groups such as oligo(ethylene glycol) (OEG) or polymerizable ethenyl‐substituents were covalently linked to the silicon atom of TMs of the 4H‐benzo‐1,3,2‐dioxasiline type. These functionalized TMs are used in simultaneous twin polymerization in combination with the ideal TM 2,2'‐spirobi[4H‐1,3,2‐benzodioxasiline]. Nanostructure dimension can be adjusted in the range from 2 to 20 nm by the composition of the components used in hybrid material synthesis. Inorganic/organic hybrid material disks of interpenetrating networks with hierarchical nanostructures are available by polymerization in the melt which are potentially suitable as membrane devices. Physical properties such as brittleness, transparency, electrolytic stability, and barrier properties of the hybrid material could potentially be adjusted by changing both monomer composition and monomer structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2312–2320     

乙醇或乙醇-水为新的溶剂体系沉淀聚合制备单分散聚合物微球

以三羟甲基丙烷三丙烯酸酯(TMPTA)作交联剂,, 苯乙烯 (St) 作共聚单体,, 偶氮二异丁腈(AIBN)作引发剂,, 在低毒性乙醇和乙醇-水混合物这一新的溶剂体系中沉淀聚合反应4 h制备了单分散交联微球. 通过提高交联剂用量、引发剂用量和改变反应介质中水的用量探讨了提高单体转化率的方法. 结果表明,, 提高引发剂用量和增加溶剂中水的用量都能有效提高单体转化率并制得粒径均匀的微球. 保持其他条件不变,, 在乙醇中使用2 wt% AIBN仅能得到79%的单体转化率,, 提高AIBN用量至6 wt%或在介质中增加水的用量至28 vol%,, 在制得单分散微球的同时单体转化率可以达到95%以上. 文中对微球的形成机理和提高单体转化率的方法给出了理论解释.