Amphiphilic block copolymers of vinyl ethers by living cationic polymerization. II. Synthesis and surface activity of macromolecular amphiphiles with pendant amino groups

Amphiphilic block polymers of vinyl ethers (VEs). $\rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OCH}_{\rm 2} {\rm CH}_{\rm 2} {\rm NH}_{\rm 2} } \right)\rlap{--} ]_m \rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OR}} \right)\rlap{--} ]_n \left( {{\rm R: }n{\rm - C}_{{\rm 16}} {\rm H}_{{\rm 33}} ,{\rm }n{\rm - C}_{\rm 4} {\rm H}_{\rm 9} ;m \simeq 40,{\rm n} = 1 - 10} \right)$ were prepared, each of which consists of a hydrophilic segment with pendant primary amino groups and a hydrophobic poly(alkyl VE) segment. Their precursors were obtained by the HI/I₂-initiated sequential living cationic polymerization of an alkyl VE and a VE with a phthalimide pendant (CH₂ = CHOCH₂CH₂Im; Im; phthalimide group), where the segment molecular weights and compositions (m/n ratio) could be controlled by regulating the feed ratio of two monomers and the concentration of hydrogen iodide. Hydrazinolysis of the imide functions gave the target polymers which were readily soluble in water under neutral conditions at room temperature. These amphiphilic block polymers lowered the surface tension of their aqueous solutions (0.1 wt%, 25°C) to a minimum ? 30 dyn/cm when the hydrophobic pendant R was n-C₄H₉ (n = 4–9). The polymers with n-C₄H₉ pendants in the hydrophobic segment exhibited a higher surface activity than those with n-C₁₆ H₃₃ pendants. The surface activity of the polymers also depended on the pH of the polymer solutions; the surface activity increased in more basic solutions where the ionization of the amino group (? NH₂)2? NH₃^⊕) is suppressed.     

Optical anisotropy of polymer chains and Markov processes. II. Polyoxyethylene

A comparative study of the average molecular optical anisotropy 〈γ²〉 of the polyoxyethylene chain, \documentclass{article}\pagestyle{empty}\begin{document}${\rm R} \hbox{---} {\rm O}\rlap{--} ({\rm CH}_2 {\rm CH}_2 {\rm O}\rlap{--} )_n {\rm R}$\end{document} where R = CH₃, H and n is the degree of polymerization of the molecule, was carried out for the different internal rotational models considered in Part I of this series. In particular, the results obtained show that the condition of interdependence between internal rotational angles of nearest-neighboring bonds increases the average molecular optical anisotropy by about 4% (n ? 1), compared with the case of independent rotations. This increase is much weaker than in polyethylene chains, for which it is about 20% under analogous conditions.     

Synthesis of polyamides by the polyaddition of bissuccinimides with diamines

Polyamides which contain succinamide units, ? NHCO? (CH₂)₂? CONH? were prepared by the ring-opening polyaddition of bissuccinimides with diamines at 200°C. in bulk. Nylon 24 and nylon 64 were prepared by the reaction of N,N′-ethylenedisuccinimide with ethylenediamine and of N,N′-hexamethylenedisuccinimide with hexamethylenediamine, respectively. It was suggested that the transamidation reaction by aminolysis influenced the detailed structures of the polymers prepared from N,N′-ethylenedisuccinimide and hexamethylenediamine and from N,N′-hexamethylenedisuccinimide and ethylenediamine. The detailed structures of the polymers are discussed on the basis of their melting points and x-ray diagrams. It is concluded that the polymers contain a crystalline portion of \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--}[{\rm NH \hbox{--} (CH}_2 {\rm)}_{\rm 2} {\rm \hbox{--} NHCO \hbox{--}}({\rm CH}_2)_2 {\rm \hbox{--} CONH \hbox{--}}({\rm CH}_2)_6 {\rm \hbox{--} NHCO \hbox{--}}({\rm CH}_2)_2 {\rm \hbox{--} CO\rlap{---}]} $\end{document} sequences.     

Structure and formation of gaseous [C4H5O]+ Ions. II–Ions of the type HCC?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}(OH)(CH3)

Loss of an alkyl group X? from acetylenic alcohols HC?C? CX(OH)(CH₃) and gas phase protonation of HC?C? CO? CH₃ are both shown to yield stable HC?C? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}(OH)(CH₃) ions. Ions of this structure are unique among all other [C₄H₅O]⁺ isomers by having m/z 43 [C₂H₃O]⁺ as base peak in both the metastable ion and collisional activation spectra. It is concluded that the composite metastable peak for formation of m/z 43 corresponds to two distinct reaction profiles which lead to the same product ion, CH₃\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O, and neutral, HC?CH. It is further shown that the [C₄H₅O]⁺ ions from related alcohols (like HC?C? CH(OH)(CH₃)) which have an α-H atom available for isomerization into energy rich allenyl type molecular ions, consist of a second stable structure, H₂C?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? C(OH)?CH₂.     

Alternating copolymerization of dienes with α-olefins

Alternating copolymerization of butadiene with several α-olefins and of isoprene with propylene were investigated by using a mixture of VO(Acac)₂, Et₃Al, and Et₂AlCl as catalyst. The alternating copolymerization ability of the olefins decreases in the order, propylene > 1-butene > 4-methyl-1-pentene > 3-methyl-1-butene. The study on the sequence of the copolymer of isoprene with propylene by ozonolysis reveals that the polymer chain is reasonably expressed by the sequence \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}_{\rm 2} \hbox{--} {\rm CH} \hbox{=\hskip-1pt=} {\rm C(CH}_{\rm 3}) \hbox{--} {\rm CH}_{\rm 2} \hbox{--} {\rm CH(CH}_{\rm 3}) \hbox{--} {\rm CH}_{\rm 2} \rlap{--}]_n $\end{document}. NMR and infrared spectra indicate that the chain is terminated with propylene unit, forming a structure of ?C(CH₃)? CH₂? C(CH₃)?CH₂ involving a vinylene group.     

Polymerization of σ-bonded organo-transition metal derivatives of styrene

Five new monomers of transition metal complexes containing a styryl group, trans-\documentclass{article}\pagestyle{empty}\begin{document}$ {\rm Pd}({\rm PBu}_{\rm 3})_2 \rlap{--} ({\rm C}_6 {\rm H}_4 {\rm CH} \hbox{=\hskip-2pt=} {\rm CH}_2 ){\rm X\ X \hbox{=\hskip-2pt=} Cl(Ia),\ X \hbox{=\hskip-2pt=} Br(Ib)},\ {\rm X \hbox{=\hskip-2pt=} CN(Ic),\ X \hbox{=\hskip-2pt=} Ph(Id)} $\end{document} and trans-\documentclass{article}\pagestyle{empty}\begin{document}${\rm Pt(PBu}_{\rm 3} {\rm )}_{\rm 2} \rlap{--} ({\rm C}_{\rm 6} {\rm H}_{\rm 4} {\rm CH} \hbox{=\hskip-2pt=} {\rm CH}_2 ){\rm Cl}({\rm II})$\end{document}, were synthesized. The monomers were readily homopolymerized in benzene with the use of AIBN or BBu₃–oxygen as the initiator. Copolymerization of Ia with styrene was carried out by using AIBN. From the Cl content of the copolymers by analysis, monomer reactivity ratios and Q–e values were obtained as follows: r₁ = 1.49, r₂ = 0.45; Q₂ = 0.41, e₂ = ?1.4 (M₁ = styrene, M₂ = Ia). Based on the above data, the σ-bonded palladium moiety at para position of styrene acts as a strongly electron-donating group to the phenyl ring. This is also supported by the olefinic β-carbon chemical shift of ¹³C NMR for Ia.     

Polymerization of silicon-containing acetylenes. 5. Polymerization of 1-silyl-1-propynes by TaCl5-based catalysts

Polymerization of homologues of 1-(trimethylsilyl)-1-propyne [CH₃C?CSi(CH₃)₃] was studied. CH₃C?CSi(CH₃)₂(n-C₆H₁₃) ( I ) polymerized with 1 : 1 mixtures of TaCl₅ and organometallic cocatalysts (e.g., Ph₄Sn and Ph₃Bi) to produce in good yields a polymer having a weight-average molecular weight (M _w) over 1 × 10⁶. CH₃C?CSi(CH₃)₂ Ph ( II ) and CH₃C?CSi(C₂H₅)₃ ( III ) formed polymers having M _w's of ～ 5 × 10⁵ in moderate yields in the presence of TaCl₅-based catalysts. In contrast, none of CH₃C?CSi(CH₃)₂(i-C₃H₇), CH₃C? CSi(CH₃)₂(t,-C₄H₉), C₂H₅C?CSi(CH₃)₃, and n,-C₄H₉C?CSi(CH₃)₃ polymerized, which is attributed to the steric effect of the monomers. Some other 1-silyl-1-propynes also failed to polymerize. The three new polymers formed from ( I )–( III ) had the structure \documentclass{article}\pagestyle{empty}\begin{document}$\rlap{--} [{\rm CCH}_{\rm 3} \hbox{=\hskip-2pt=} {\rm C(SiRR'R''}\rlap{--} ]_n$\end{document} according to IR and ¹³C-NMR spectra. They were white solids, soluble in low-polarity solvents (e.g., toluene and chloroform) and stable enough in air at room temperature.     

Structural study of alternating copolymerization of aziridines with cyclic imide

The structures of copolymers of aziridines with cyclic imides were determined by means of infrared spectrometry, paper electrophoresis of the hydrolyzate, and NMR spectrometry. The structure of the repeating unit in the copolymer of ethylenimine with succinimide was \documentclass{article}\pagestyle{empty}\begin{document}$\rlap{--} ({\rm CH}_2 {\rm CH}_2 {\rm NHCOCH}_2 {\rm CH}_2 {\rm CONH}\rlap{--} ) $\end{document}. The endgroups of the copolymer were N-acylethylenimine ring, N-substituted succinimide ring, and primary amide group. The copolymer of ethylenimine with N-ethylsuccinimide had the repeating unit of \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}_2 {\rm CH}_2 {\rm NHCOCH}_2 {\rm CH}_2 {\rm CON}({\rm C}_2 {\rm H}_5 )\rlap{--} ] $\end{document} and the endgroups of N-acylethylenimine and N-substituted succinimide ring. N-Ethylethylenimine did not copolymerize with succinimide, but in the presence of water, the reaction occurred to give an amorphous polymer. This copolymer had the repeating unit \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}_2 {\rm CH}_2 {\rm NHCOCH}_2 {\rm CH}_2 {\rm CON}({\rm C}_2 {\rm H}_5 )\rlap{--} ] $\end{document} and the endgroups were N-substituted succinimide ring and amine group but not N-acylethylenimine ring. On the basis of this structural information, the initiation reaction was discussed.     

Polyfluoroethers from 2,2,3,3,4,4-hexafluoropentanediol and bis(chloromethyl) ether and bishalomethyl-substituted aromatic compounds

The polyfluoroethers \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm \rlap{--}[OCH}_{\rm 2} {\rm XCH}_{\rm 2} {\rm OCH}_{\rm 2} ({\rm CF}_{\rm 2} )_3 {\rm CH}_{\rm 2} \rlap{--} ]_n $\end{document} (X = O, 1,3-C₆H₄, 1,4-C₆H₄ or 4,4′-C₆H₄OC₆H₄) and copolymers (X = 1,3- and 1,4-C₆H₄) having inherent viscosities in acetone >0.5 dl/g were prepared in good yields by treatment of the mixture of sodium salts obtained from 2,2,3,3,4,4-hexafluoropentanediol and an excess of sodium hydride in tetramethylene sulfone (TMS)-tetrahydrofuran or TMS-petroleum ether with the appropriate bishalomethyl compound. The polymers varied from highly extensile elastomeric gums when X = O or 1,3-C₆H₄ to a leathery material when X = 4,4′-C₆H_4?OC₆H₄. Glass transition temperatures ranged from -43°C when X = 0 to 6°C when X = 4,4′-C₆H₄OC₆H₄. The polymers started to lose weight (by thermogravimetry) at 220–250°C in oxygen and at 250–290°C in nitrogen. However, the xylylene polymers underwent structural changes even at room temperature, as reflected by changes in solution viscosity. Attempts to cure the polymer when X = O with peroxides were unsuccessful.     

Efficient, “one-pot” synthesis of silylene–acetylene and disilylene–acetylene preceramic polymers from trichloroethylene

An extremely efficient process has been developed for the synthesis of linear silylene-acetylene and disilylene-acetylene polymers. Trichloroethylene is quantitatively converted by n-butyllithium to dilithioacetylene. Quenching with dialkyl-or diaryldichlorosilanes affords high yields of the polymers, $ \rlap{--} [{\rm SiR}_{\rm 2} \hbox{---} {\rm C} \equiv {\rm C\rlap{--} ]}_n ,{\rm and }\rlap{--} [{\rm SiMe}_{\rm 2} {\rm SiMe}_{\rm 2} - {\rm C} \equiv {\rm C\rlap{--} ]}_n $ if ClMe₂SiSiMe₂Cl is employed. Molecular weights are much higher with this route than when acetylene is used as the dilithio- or dimagnesium acetylide precursor. Some of these polymers can be pulled into continuous fibers, and all can be cast into coherent films and thermally converted into silicon carbide.     

The mass spectra of six fluorinated β-diketones and their monothio analogues

The mass spectra of the fluorinated β-diketones RCOCH₂COCF₃ (R = Ph, p-FC₆H₄, p-ClC₆H₄, p-BrC₆H₄, p-MeC₆H₄ and 2-thienyl) and their monothio analogues RC(SH)?CHCOCF₃ have been obtained. The replacement of one oxygen by sulphur in the β-diketones brings about a greater complexity in the mass spectra. The β-diketones fragment by first losing a ·CF₃ radical and then successively lose CH₂?C?O and CO to yield \documentclass{article}\pagestyle{empty}\begin{document}${\rm [R}\mathop {\rm C}\limits^{\rm + } {\rm = O]} $\end{document} and [R]⁺. The monothio-β-diketones also fragment by an analogous reaction pathway: viz. the initial loss of ·CF₃ is followed by the successive loss of CH₂?C?O and CS to yield \documentclass{article}\pagestyle{empty}\begin{document}${\rm [R}\mathop {\rm C}\limits^{\rm + } {\rm = S]} $\end{document} and [R]⁺. However, they also fragment by two other pathways involving the initial loss of ·H and ·X (X=F, Cl, Br, Me), the latter occurring only with those monothio-β-diketones having R=p-XC₆H₄.     

Applications of NMR spectroscopy of chiral association complexes 5. Stereodynamics and diastereotopism in chiral 1,3-dienes \documentclass{article}\pagestyle{empty}\begin{document}${\rm HOCMe}_{\rm 2} \rlap{--} ({\rm CCl =\!= CCl\rlap{--})}_{\rm 2} {\rm X}$\end{document}

The barriers to partial rotation around the central single bond in chiral dienes \documentclass{article}\pagestyle{empty}\begin{document}${\rm HOCMe}_{\rm 2} \rlap{--} ({\rm CCl =\!= CCl\rlap{--})}_{\rm 2} {\rm X}$\end{document} have been determined by coalescence of either ¹H NMR signals (X = CH₂OCH₃) or ¹³C NMR signals (X = H). In the presence of the optically active shift reagent (+) ? Eu(hfbc)₃ all ¹H signals were split at temperatures where the interconversion of enantiomers is slow. The temperature dependence of these spectra also yielded free activation enthalpies for the enantiomerizations which were in agreement with the ones obtained without Eu(hfbc)₃. The assignment of the four methyl resonances appearing in the presence of (+) ? Eu(hfbc)₃ at low temperature was possible by gradually increasing the rate of enantiomerization or gradually replacing the optically active auxiliary compound by the racemic one.     

Pyrolysis of dimethyl peroxide

By using isobutane (t-BuH) as a radical trapit has been possible to study the initial step in the decomposition of dimethyl peroxide (DMP) over the temperature range of 110–140°C in a static system. For low concentrations of DMP (2.5 × 10^?5?10^?4M) and high pressures of t?BuH (～0.9 atm) the first-order homogeneous rate of formation of methanol (MeOH) is a direct measure of reaction (1): \documentclass{article}\pagestyle{empty}\begin{document}${\rm DMP}\mathop \to \limits^1 2{\rm Me}\mathop {\rm O}\limits^{\rm .},{\rm Me}\mathop {\rm O}\limits^{\rm .} + t{\rm - BuH}\mathop \to \limits^4 {\rm MeOH} + t{\rm -}\mathop {\rm B}\limits^{\rm .} {\rm u}$\end{document}. For complete decomposition of DMP in t-BuH, virtually all of the DMP is converted to MeOH. Thus DMP is a clean thermal source of Me\documentclass{article}\pagestyle{empty}\begin{document}$\mathop {\rm O}\limits^{\rm .}$\end{document}. In the decomposition of pure DMP complications arise due to the H-abstraction reactions of Me\documentclass{article}\pagestyle{empty}\begin{document}$\mathop {\rm O}\limits^{\rm .}$\end{document} from DMP and the product CH₂O. The rate constant for reaction (1) is given by k₁ = 10^15.5?37.0/θ sec^?1, very similar to other dialkyl peroxides. The thermochemistry leads to the result D(MeO? OMe) = 37.6 ± 0.2 kcal/mole and /H(Me\documentclass{article}\pagestyle{empty}\begin{document}$\mathop {\rm O}\limits^{\rm .}$\end{document}) = 3.8 ± 0.2 kcal/mole. It is concluded that D(RO? OR) and D(RO? H) are unaffected by the nature of R. From ΔS and A₁, k₂ is calculated to be 10^10.3±0.5 M^?1· sec^?1: \documentclass{article}\pagestyle{empty}\begin{document}$2{\rm Me}\mathop {\rm O}\limits^{\rm .} \mathop \to \limits^2 {\rm DMP}$\end{document}. For complete reaction, trace amounts of t-BuOMe lead to the result k₂ ～ 10⁹ M^?1 ·sec^?1: \documentclass{article}\pagestyle{empty}\begin{document}$2t{\rm - Bu}\mathop \to \limits^5$\end{document} products. From the relationship k₆ = 2(k₂k_5a)^1/2 and with k_5a = 10^8.4 M^?1 · sec^?1, we arrive at the result k₆ = 10^9.7 M^?1 · sec^?1: \documentclass{article}\pagestyle{empty}\begin{document}$2t{\rm - u}\mathop {\rm B}\limits^{\rm .} \to (t{\rm - Bu)}_{\rm 2}{\rm,}t{\rm -}\mathop {\rm B}\limits^{\rm .} {\rm u} + {\rm Me}\mathop {\rm O}\limits^{\rm .} \mathop \to \limits^6 t{\rm - BuOMe}$\end{document}.     

Méthodes chimiques d'analyse des polyacroléines linéaires

Linear polyacroleins prepared by anionic polymerization give the structural repeat units of the types \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--}[{\rm CH}\left( {{\rm CHO}} \right)\hbox{--} {\rm CH}_{\rm 2} {\rm \rlap{--} ], \rlap{--} [CH}_{\rm 2} \hbox{--} {\rm CH}\left( {{\rm CHO}} \right)\rlap{--} ], $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}\left( {{\rm CH}\hbox {\rm CH}_2 } \right)\hbox{\rm O\rlap{--} ]} $\end{document} without any cyclization. Analysis of these polymers by several methods reveal the nature and amount of each structural species, and an estimation of their distribution along the polymeric chain.     

Loss of methyl radical from some small immonium ions: Unusual violation of the even-electron rule

Several small immonium ions of general formula \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm R}^{\rm 1} {\rm R}^{\rm 2} {\rm C = }\mathop {\rm N}\limits^{\rm + } {\rm R}^{\rm 3} {\rm CH}_{\rm 3} $\end{document} (R¹, R², R³ = H or alkyl) eliminate ^.CH₃; this reaction occurs in the mass spectrometer in both fast (source) and slow (metastable) dissociations. Such behaviour violates the even-electron rule, which states that closed-shell cations usually decompose to give closed-shell daughter ions and neutral molecules. The heats of formation of the observed product ions (for example, [(CH₃)₂C?NH]^+.) can be bracketed using arguments based on energy data. Deuterium labelling results reveal that the methyl group originally bound to nitrogen is not necessarily lost in the course of dissociation. Thus, for instance, \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm{(CH}}_{\rm{3}})_2 = \mathop {\rm{N}}\limits^{\rm{ + }} {\rm{HCD}}_{\rm{3}} $\end{document} eliminates both CH₃^. and CD₃^., via different mechanisms, but very little CH₂D^. or CHD₂^. loss occurs.     

Zur Kenntnis der Organophosphorverbindungen. XV. Darstellung und Reaktionen von Trimethylsilylestern der Phosphinsäuren

On Organophosphorus Compounds. XV. Preparation and Reactions of Trimethylsilyl Esters of Phosphinic Acids Trimethylsilylesters of Phosphinic acids R₂P(X)YSi(CH₃)₃ (R ? CH₃, C₂H₅, C₃H₇, t?C₄H₉, C₆H₅; X, Y ? O, S) were prepared by 7 different methods as in some cases easily hydrolysable but thermally remarkably stable compounds. The properties and some reactions of these substances are reported, their structures confirmed by IR? as well as ¹H- and ³¹P-NMR-spectroscopy. Dimethylsilylen-bis(phosphinic acid esters) were obtained according to \documentclass{article}\pagestyle{empty}\begin{document}$ 2{\rm R}_{2} {\rm P(\rm X)\rm ONH}_{4} + {\rm R}_{\rm 2} {\rm SiCl}_{2} \to 2{\rm E NH}_{4} {\rm Cl + R}_{2} {\rm P(X) - O - SiR}_{2} - {\rm O - P(X)R}_{2} ({\rm R = CH}_{3};{\rm X = O,S}) $\end{document}.     

Three new isomers of [C2H6O]+˙: The radical cations [CH3O(H)CH2]+˙, [CH3CHOH2]+˙ and a low-energy isomer of unassigned structure

Three new [C₂H₆O]⁺˙ ions have been generated in the gas phase by appropriate dissociative ionizations and characterized by means of their metastable and collisionally induced fragmentations. The heats of formation, ΔH_f⁰, of the two ions which were assigned the structures [CH₃O(H)CH₂]⁺˙ and [CH₃CHOH₂]⁺˙ could not be measured. The third isomer, to which the structure \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 2} = \mathop {\rm C}\limits^{\rm .} {\rm H} \cdot \cdot \cdot \mathop {\rm H}\limits^ + \cdot \cdot \cdot {\rm OH}_{\rm 2} $\end{document} is tentatively assigned, was measured to have ΔH_f⁰ = 732±5 kJ mol^?1, making it the [C₂H₆O]⁺˙ isomer of lowest experimental heat of formation. It was found that the exothermic ion–radical recombinations [CH₂OH]⁺+CH₃˙→[CH₃O(H)CH₂]⁺˙ and \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} \mathop {\rm C}\limits^{\rm + } {\rm HOH + H}^{\rm .} $\end{document}→[CH₃CHOH₂]⁺˙ have large energy barriers, 1.4 and ?0.9 eV, respectively, whereas the recombinations yielding [CH₃CH₂OH]⁺˙ have little or none.     

The gas phase ion chemistry of the acetyl cation and isomeric [C2H3O]+ ions. On the structure of the [C2H3O]+ daughter ions generated from the enol of acetone radical cation

Methods are described for the unequivocal identification of the acetyl, [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document} ?O] (a), 1-hydroxyvinyl, [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH] (b), and oxiranyl, (d), cations. They involve the careful examination of metastable peak intensities and shapes and collision induced processes at very low, high and intermediate collision gas pressures. It will be shown that each [C₂H₃O]⁺ ion produces a unique metastable peak for the fragmentation [C₂H₃O]⁺ → [CH₃]⁺+CO, each appropriately relating to different [C₂H₃O]⁺ structures. [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] ions do not interconvert with any of the other [C₂H₃O]⁺ ions prior to loss of CO, but deuterium and ¹³C labelling experiments established that [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH] (b) rearranges via a 1,2-H shift into energy-rich leading to the loss of positional identity of the carbon atoms in ions (b). Fragmentation of b to [CH₃]⁺+CO has a high activation energy, c. 400 kJ mol^?1. On the other hand, , generated at its threshold from a suitable precursor molecule, does not rearrange into [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH], but undergoes a slow isomerization into [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] via [CH₂\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}HO]. Interpretation of results rests in part upon recent ab initio calculations. The methods described in this paper permit the identification of reactions that have hitherto lain unsuspected: for example, many of the ionized molecules of type CH₃COR examined in this work produce [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH] ions in addition to [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] showing that some enolization takes place prior to fragmentation. Furthermore, ionized ethanol generates a, b and d ions. We have also applied the methods for identification of daughter ions in systems of current interest. The loss of OH^˙ from [CH₃COOD]^+˙ generates only [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OD]. Elimination of CH₃^˙ from the enol of acetone radical cation most probably generates only [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] ions, confirming the earlier proposal for non-ergodic behaviour of this system. We stress, however, that until all stable isomeric species (such as [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm O}\limits^{\rm + } $\end{document}?C:]) have been experimentally identified, the hypothesis of incompletely randomized energy should be used with reserve.     

α,ω-Disubstituted polymethylpolyphosphonates and polyphenylpolyphosphonates from condensation polymerization

Condensation polymerization of phosphonates through formation of P? O? P linkages has been achieved by (1) volatilization of methyl chloride from mixtures of CH₃P(O)Cl₂ with CH₃P(O)(OCH₃)₂; (2) volatilization or chemical removal of water from CH₃P(O)(OH)₂; and (3) volatilization of HCl from mixtures of CH₃P(O)Cl₂ with CH₃P(O)(OH)₂ or C₆H₅P(O)Cl₂ with C₆H₅P(O)(OH)₂. Depending on the proportions of the reagents, the polymerization products consist of various mixtures of chain molecules of the type \documentclass{article}\pagestyle{empty}\begin{document}${\rm X \hbox{--} P}({\rm O})({\rm R})\rlap{--}[{\rm O \hbox{--} P}({\rm O})({\rm R})\rlap{--}]_n {\rm X}$\end{document} for R = CH₃ and X = OCH₃, Cl, or OH, or for R = C₆H₅, x = Cl or OH. ³¹P nuclear magnetic resonance (NMR) was used to investigate both the polymethylpolyphosphonates and the polyphenylpolyphosphonates; and ¹H NMR of the CH₃P and CH₃O moieties was also used to study the polymethylpolyphosphonates. In the methoxyl-terminated polymethylpolyphosphonates, which was the system studied most extensively, no detectable amounts of cyclic molecules were found at equilibrium, but a crystalline methylphosphonic anhydride, CH₃PO₂, exhibited some ring structures. The equilibrium size distributions gave evidence that the sorting of the mono- and difunctional phosphorus-based units making up the oligomeric chains is affected by neighboring units. Kinetic measurements demonstrated that the condensation polymerization is a complicated process involving considerable scrambling of terminal groups with bridging oxygen atoms.     

Structure and formation of gaseous [C4H5O]+ ions. IV—Ions derived from the cyclopropenium ion [C3H3]+

Characterization of [C₄H₅O]⁺ ions in the gas phase using their metastable ion and collisional activation spectra shows that the three isomeric ions HC?C? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}H? OCH₃, CH₃O? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?C?CH₂ and ? OCH₃ related to the two stable [C₃H₃]⁺ cations [HC?C? CH₂]⁺ and are stable for ≥ 10^?5s. In contrast to the formation of cyclopropenium ions, it is found that the methoxy cyclopropenium ion is not generated from acyclic precursor molecules. The small but significant intensity differences found in the collisional activation spectra of [C₃H₃]⁺ ions generated from HC?C? CH₂I and HC?C? CH₂Cl possibly indicate the presence of [C₃H₃]⁺ ions of different structures.