基于荧光硅球的克伦特罗快速定量免疫层析试纸条的研制

采用荧光硅球为标记物制备了快速定量检测克伦特罗(CLE)的荧光硅球免疫层析试纸条。通过正交实验得到最优荧光硅球抗体标记量、硅球垫抗体标记物用量以及检测线抗原浓度。在最优条件下,试纸条线性范围为0.28~3.3 mg/L。猪尿样品CLE加标回收率为81.7%~101%,表明此试纸条可实现猪尿中CLE残留的快速定量检测。     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

水溶性的高荧光CdTe/CdSeⅡ型核壳量子点的合成与表征

用L-半胱氨酸(L-cysteine)作为稳定剂,以制备的CdTe量子点为核模板,水相合成了具有近红外发光的Ⅱ型核壳CdTe/CdSe半导体量子点。实验考察了合成温度,核模板的尺寸和组分比等因素对合成高质量的CdTe/CdSe量子点的影响。用紫外-可见吸收和荧光光谱研究了合成的量子点的光学性质。在优化的合成条件下,荧光发射光谱在586～753nm范围连续可调,荧光量子产率高达68%;通过X-射线衍射(XRD),X射线光电子能谱(XPS)和透射电镜(TEM)对合成的Ⅱ型核壳CdTe/CdSe量子点进行了结构和形貌表征。     

基于新型量子点荧光微球的氯霉素免疫层析试纸条的制备和应用

以羧基化CdTe/ZnSe量子点荧光微球为标记物,通过1-乙基-(3-二甲基氨基丙基)碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)活化法将氯霉素(CAP)单克隆抗体与量子点荧光微球偶联制备荧光探针.氯霉素全抗原(CAP-HS-BSA)及羊抗鼠二抗分别喷涂硝酸纤维素膜,形成检测线(T线)和质控线(C线),组装成新型氯霉素量子点荧光微球免疫层析试纸条,建立了快速、定量检测牛奶中CAP的方法.本研究开发的量子点荧光微球试纸条可在15 min内完成牛奶样品中CAP的定量检测,线性范围为0.1~100.0μg/L,检出限为0.1μg/L.牛奶样品CAP的加标回收率为93.3%~97.9%,相对标准偏差在4.9%~6.9%之间.     

石墨烯/CdTe量子点复合物的合成及在克伦特罗检测方面的应用（英文）

成功地合成了石墨烯/CdTe量子点复合物,并采用透射电镜、紫外吸收光谱、荧光发射光谱、荧光衰减曲线和X射线光电子能谱对产物进行了表征。透射电镜结果显示CdTe量子点被修饰于石墨烯的表面;X射线光电子能谱结果表示石墨烯在合成过程中被还原,还表明在所合材料的表面具有羧基和羟基;荧光发射光谱和荧光衰减曲线的结果显示将CdTe量子点修饰于石墨烯表面显著提高了CdTe量子点的荧光性能。此外,基于克伦特罗和石墨烯/CdTe量子点复合物之间形成的氢键,所合成材料可用于定量分析克伦特罗。克伦特罗对石墨烯/CdTe量子点复合物具有显著的猝灭作用,荧光强度的降低(F0/F)与克伦特罗之间存在良好的线性关系,线性范围为7.22~108.30μmol·L-1,检出限为4μmol·L-1。     

谷胱甘肽稳定的高性能CdTe/CdS核壳型量子点制备及应用于荧光免疫检测米醋中痕量黄曲霉毒素B1

谷胱甘肽作稳定剂水相合成CdTe/CdS核壳型量子点,以EDC/NHS为活化剂对黄曲霉毒素B1(AFB1)抗体进行量子点标记,然后用牛血清蛋白封闭抗体。通过对量子点和标记抗体性能的研究发现,CdTe/CdS核壳型量子点荧光的强度和稳定性较裸壳的CdTe量子点分别提高了4倍和2倍以上。由于谷胱甘肽碳链较长,量子点对抗体尤其是活性位点处的空间构型影响减少,从而改善了量子点标记抗体的稳定性和活性,CdTe/CdS标记的AFB1抗体与AFB1免疫前后荧光强度变化显示抗体至少可以稳定6 d。基于谷胱甘肽稳定的高性能CdTe/CdS量子点,建立了一种荧光免疫检测黄曲霉毒素B1的新方法。AFB1浓度在0.68～40 pmol/L之间荧光强度与浓度呈线性关系,相关系数(R2)为0.9914,检出限为0.3 pmol/L。方法已成功应用于米醋样品中痕量黄曲霉毒素B1的测定。     

高性能CdTe/CdS核壳型量子点的制备及应用于小麦面粉中呕吐毒素的荧光免疫检测研究

量子点荧光免疫法的广泛应用迫切需要提高量子点的发光强度和抗体的稳定性. 分别采用巯基乙酸和谷胱甘肽作稳定剂, 水相合成CdTe量子点, 再包覆CdS制备核壳型CdTe/CdS量子点. 以EDC/NHS作交联剂将CdTe/CdS量子点标记到呕吐毒素抗体上, 然后用牛血清蛋白封闭抗体. 研究发现, 谷胱甘肽稳定剂优于巯基乙酸. 与CdTe量子点相比, 谷胱甘肽修饰的CdTe/CdS量子点其荧光的强度和稳定性分别提高6倍和2倍以上. 谷胱甘肽碳链较长, 减少了量子点对抗体尤其是活性位点处的空间构型影响, 从而大大提高抗体的稳定性. 监测不同储藏时间(4 ℃)的CdTe/CdS量子点-抗体偶联复合物与呕吐毒素免疫反应前后荧光强度变化值, 结果显示抗体至少可以稳定7 d. 基于谷胱甘肽稳定的高性能CdTe/CdS量子点, 我们建立了一种新的呕吐毒素荧光免疫检测方法. 呕吐毒素浓度在0～0.9 ng•mL^－1之间相对荧光强度呈线性关系, 相关系数(R²)为0.9992, 检出限是0.038 ng•mL^－1. 方法的灵敏度高于文献报道的其它方法, 如GC-ECD, HPLC和HPLC-MS, 已成功应用于小麦面粉样品中痕量呕吐毒素的测定.     

谷胱甘肽稳定水溶性CdTe/ZnTe量子点的制备与表征

用还原型谷胱甘肽(GSH)作为稳定剂, 合成了水溶性的CdTe/ZnTe核壳结构的半导体量子点. 考察了Zn/Cd反应物配比及GSH用量对CdTe/ZnTe量子点的性能影响. 用高分辨透射电子显微镜(HRTEM)和X射线粉末衍射(XRD)光谱对CdTe和CdTe/ZnTe的形貌和晶体结构进行了表征. 荧光光谱结果表明, 核壳结构的CdTe/ZnTe量子点比单一的CdTe量子点具有更高的荧光量子产率和更好的光活化性能.     

CdTe量子点与蛋白质相互作用的荧光猝灭效应

本文在水热法合成水溶性CdTe及核壳结构CdTe/CdS量子点的基础上,分别研究了细胞色素c对CdTe量子点及CdTe/CdS核壳量子点荧光的猝灭效应和CdTe量子点对牛血清白蛋白荧光的猝灭效应,并阐述了猝灭机理。结果显示,细胞色素c对CdTe量子点的荧光猝灭效应具有一定的粒径依赖性,粒径越小,猝灭效应越强;细胞色素c对CdTe/CdS核壳量子点的猝灭效应比对CdTe量子点的更强,揭示了受激电子的表面传递机理。CdTe量子点通过松散牛血清白蛋白的螺旋结构而猝灭其荧光。     

CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

Rapid Screening for Potential Epitopes Reactive with a Polycolonal Antibody by Solution-Phase H/D Exchange Monitored by FT-ICR Mass Spectrometry

The potential epitopes of a recombinant food allergen protein, cashew Ana o 2, reactive to polyclonal antibodies, were mapped by solution-phase amide backbone H/D exchange (HDX) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Ana o 2 polyclonal antibodies were purified in the serum from a goat immunized with cashew nut extract. Antibodies were incubated with recombinant Ana o 2 (rAna o 2) to form antigen:polyclonal antibody (Ag:pAb) complexes. Complexed and uncomplexed (free) rAna o 2 were then subjected to HDX-MS analysis. Four regions protected from H/D exchange upon pAb binding are identified as potential epitopes and mapped onto a homologous model.

室温水相合成CdTe/CdS核/壳结构量子点

开发了一种以聚乙烯吡咯烷酮为分散剂和稳定剂经条件温和的室温水相合成光谱可调的水溶性CdTe/CdS核/壳结构量子点的方法:向新鲜制备的CdTe量子点溶液中加入硫源,继续反应即可生成CdS壳层,通过控制硫源的浓度即可控制CdS壳层厚度,从而调节光谱性质和增强稳定性.采用XRD、TEM、HRTEM、荧光光谱以及紫外-可见光...     

CdTe/CdS核壳量子点与蛋白质荧光标记

利用连续离子层吸附技术合成了水溶性的CdTe／CdS核壳量子点．通过CdS壳层的包覆,量子点的量子效率由原来的15％（裸核）提高到38％（核壳）,这种核壳结构量子点的化学和光学性质具有更好的稳定性,可以用于生物标记．本文采取共价连接与静电吸附两种方法,实现了量子点的生物标记,电泳技术已证明,应用这种量子点成功地实现了对蛋白质分子的生物标记．通过对量子点与蛋白质偶联前后的荧光光谱分析,发现量子点与蛋白质作用后荧光增强是由于蛋白质对量子点进行了表面修饰,从而降低了表面缺陷引起的非辐射跃迁几率所致．通过共价连接量子点的荧光峰位红移,主要是由于偶极-偶极相互作用引起的;量子点与蛋白质静电吸附作用引起的荧光峰位蓝移主要起因于量子点表面电荷量的降低．     

Synthesis of CdTe/SiO_2 Composites and Their Fluorescence Properties

Thioglycolic acid(TGA)-stabilized CdTe nanocrystals(NCs) were prepared with sodium tellurite as tellurium source,which avoids the cumbersome processes associated with H2Te or NaHTe sources.Fluorescent CdTe/SiO2 composites were synthesized by a sol-gel method without the exchange of surface ligands.The phase structure of CdTe NCs was investigated by X-ray diffractometry.For comparison,some characterizations were done for both the CdTe NCs and the composites.CdTe NCs and CdTe/SiO2 composites were characterize...     

Enhanced chemiluminescence from reactions between CdTe/CdS/ZnS quantum dots and periodate

A novel chemiluminescence (CL) performance of CdTe/CdS/ZnS quantum dots (QDs) with periodate (KIO₄) was studied. Effects of concentration and pH on the CL system were investigated. Electron spin resonance (ESR) and the effects of radical scavenger analysis were employed for identification of intermediate species. The CL spectra for this system showed only one maximum emission peak centered around 620 nm, which was similar with photoluminescence (PL) spectra of CdTe/CdS/ZnS QDs. The CL of CdTe/CdS/ZnS QDs was induced by direct chemical oxidation and the possible mechanism could be explained by radiative recombination of injected holes and electrons. This investigation not only provided new sight into the optical characteristics of CdTe/CdS/ZnS QDs, but also broadened their potential optical utilizations.     

Physicochemical aspects of microbial adhesion — Influence of antibody adsorption on the deposition ofStreptococcus sobrinus in a parallel-plate flow chamber

Deposition of the oral bacteriumStreptococcus sobrinus HG977 onto glass (water contact angle 0°) and onto FEP-Teflon (fluoroethylenepropylene; water contact angle 110°) was studied in a parallel-plate flow chamber in the presence and absence of polyclonal antibodies (pAb) and monoclonal antibodies (mAbs) adsorbed onto the cells. The zeta potentials of the bacteria ranged from −7.1 to −8.5 mV at pH 6.8 and were not affected by the presence of pAb or mAbs. Hydrophobicity (by water contact angles) increased from 30° (no antibodies) to 88° in the presence of pAb adsorbed onto the bacterial cell surface. The untreatedS. sobrinus had a greater tendency to adhere to glass (44.5 × 10⁶ cm⁻²) than to FEP-Teflon (18.3 × 10⁶ cm⁻²), in accordance with thermodynamic modelling. After preincubation ofS. sobrinus with pAb, its clear preference for adhesion to glass disappeared as expected from its increased hydrophobicity. Although forS. sobrinus preincubated with OMVU10 no difference was found in hydrophobicity in comparison to the untreated bacteria, the number of bacteria adhering to glass decreased to 10.2 ¢ 10⁶ cm⁻². Formation of bacterial aggregates was found whenS. sobrinus, preincubated with pAb or OMVU10, adhered to glass and FEP. This was also observed when untreated bacteria adhered to glass coated with OMVU10, or to FEP coaled with OMVU10 or pAb. Adhesion in these experiments is therefore thought to occur via near-neighbour collection induced by the presence of pAb or mAbs. Low numbers of bacteria were removed from glass after draining the flow cell, whereas high numbers of untreated bacteria and bacteria preincubated with OMVU10 were removed from FEP.S. sobrinus cells preincubated with pAb were not removed but piled up. It was concluded that the adhesion of untreatedS. sobrinus andS. sobrinus preincubated with pAb is in accordance with thermodynamic modelling, based on the overall wettability of the cell surfaces, whereas the adhesion ofS. sobrinus preincubated with OMVU10 may be through localized interactions, not expressed in overall surface properties.     

Interaction of CdTe/CdS quantum dots with antibodies

In the study,we observed the strong adsorption of CdTe/CdS QDs to antibodies and the formation of QDs-antibodies conjugates. Capillary electrophoresis with laser-induced fluorescence detection(CE-LIF),fluorescence spectrometry and fluorescence correlation spectroscopy(FCS) were used to characterize the QDs conjugates with antibody.We found that the QDs-antibody conjugates possessed high fluorescence,small hydrodynamic radii and good stability in aqueous solution.     

具有光谱可调、高量子产率和稳定性的水溶性CdTe/Cd(OH)2核壳结构纳米粒子的可控水相合成

建立了一种简便的、以易得的无机盐为反应前体的水相法制备水溶性、高量子产率以及良好稳定性的CdTe/Cd(OH)2核壳结构量子点。本方法可以通过控制Cd(OH)2 壳层结构的厚度,使不同粒径量子点的荧光发射光谱由蓝绿色渐变到橙红色。利用透射电镜、X射线粉末衍射光谱、荧光光谱以及紫外可见光谱对该CdTe/Cd(OH)2核壳结构量子点进行了表征。CdTe/Cd(OH)2核壳结构量子点所具备的良好的水溶性可望应用于生物标记。本方法简便、反应条件温和并且容易操作,为无机金属化物包覆量子点提供了一种简便的途径。     

紫外-可见吸收光谱和荧光光谱研究壳核型 CdTe/CdS量子点与盐酸巴马汀的相互作用及其分析应用

合成了巯基乙酸(TGA)修饰的壳核型CdTe/CdS量子点(TGA-CdTe/CdS QDs), 利用紫外-可见光谱和荧光光谱研究了TGA-CdTe/CdS QDs与盐酸巴马汀(PC)的相互作用机理. 结果表明, 在pH=7.4的Tris-HCl缓冲液中, QDs与PC相互作用后使QDs的荧光呈线性猝灭, 并有良好的线性关系(r=0.997), 线性范围为25~1×10⁴ ng/mL, 检出限(3σ)为7.7 ng/mL. 建立了一种快速简便、 可定量测定PC的新方法.