Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

RAFT radical copolymerization of beta‐pinene with maleic anhydride and aggregation behaviors of their copolymer in aqueous solution

RAFT copolymerization of beta‐pinene and maleic anhydride was successfully achieved for the first time, using 1‐phenylethyl dithiobenzoate as chain transfer agent in a mixed solvent of tetrehydrofuran and 1.4‐dioxane (1:9, v/v) at a feed molar ratio of beta‐pinene to maleic anhydride as 3:7, and the alternating copolymer was prepared with predetermined molecular weight and narrow molecular weight distribution. Furthermore, using former alternating copolymer as a macro‐RAFT agent, block copolymer poly(beta‐pinene‐alt‐maleic anhydride)‐b‐polystyrene was synthesized in a chain extending with styrene. Hydrolysis of this block copolymer under acidic conditions formed a new amphiphilic block copolymers poly(beta‐pinene‐alt‐maleic acid)‐b‐polystyrene whose self‐assembly behaviors in aqueous solution at different pH were investigated through SEM and DLS. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1422–1429     

Controlled free‐radical polymerization of 2‐vinylpyridine in the presence of nitroxides

Bulk free‐radical polymerization of 2‐vinylpyridine (2VP) in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) was studied under different conditions (temperature and presence of additives). Linear poly‐(2‐vinylpyridine) with a narrow molecular weight distribution and controllable molecular weight was prepared in the presence of acetic anhydride at 95 °C up to a conversion of 66%. At higher conversions side reactions became very important (pseudoliving polymerization). By applying this procedure, well‐defined random copolymers of 2VP with styrene or tert‐butylmethacrylate as well as block copolymers of 2VP with styrene were synthesized. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2889–2895, 2001     

New polymer syntheses. CXI. Aliphatic polyesters by the ring‐opening polycondensation of glutaric anhydride with ethylene or trimethylene carbonate

Several polycondensations of ethylene carbonate with succinic anhydride or glutaric anhydride (GA) were conducted in bulk. Low molar mass polyesters were obtained with pyridine‐type catalysts and GA. Analogous polycondensations of trimethylene carbonate (TMC) and GA were successful when quinoline, 4‐(N,N‐dimethylamino)pyridine, or BF₃ · OEt₂ was used as a catalyst. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed the formation of cyclic oligoesters and polyesters by backbiting degradation. Monomer mixtures containing an excess of TMC yielded copoly(ester carbonate)s with number‐average molecular weights up to 16,000 Da. Analogous copoly(ester carbonate)s were obtained from TMC and 3,3′‐tetramethylene glutaric anhydride. Furthermore, combined polycondensation/ring‐opening polymerization reactions of TMC and GA with L ‐lactide or ?‐caprolactone were studied. All copolymers were characterized by viscosity measurements and by IR, ¹H, and ¹³C NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4357–4367, 2002     

Functionalization of a poly(vinyl alcohol) in the solid state with a swelling agent by methacrylic anhydride

Poly(vinyl alcohol‐co‐vinyl acetate) was functionalized by methacrylic anhydride to introduce functional groups by a new process that consisted of modifying a polymer directly from a powder form in the solid state. To favor the diffusion of the reagents, a swelling agent composed by a mixture of ethylene carbonate and propylene carbonate was used. N‐methylimidazole was used as a basic catalyst of the esterification reaction, adjusting the reaction times. This work presents the process and the effects of the formulation on anhydride conversion. The side reactions were also determined; they all involved N‐methylimidazole. Decarboxylation reactions of the carbonates were characterized, that is, going from ethylene carbonate to ethylene glycol, which is able to react with two anhydride molecules by esterification reactions to, respectively, form 2‐hydroxyethyl 2‐methylpropenoate and ethyl 1,2‐bis(2‐methyl propenoate). The same side reactions are possible with propylene carbonate but are less reactive than the starting ethylene carbonate. Model anhydrides such as hexanoic and heptanoic anhydrides, less reactive than methacrylic anhydride, were used to characterize a new anhydride decarboxylation reaction. The homogeneity of the grafting is also discussed, especially its dependence on the polymer properties, the diffusion modes of the reagents (carbonate mixture and the anhydride), and the competition between the diffusional and chemical kinetics of methacrylic anhydride. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1618–1629, 2004     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Formation of regioregular head‐to‐tail poly[3‐(4‐butylphenyl)thiophene] by an oxidative coupling polymerization with vanadium acetylacetonate

The mechanism for the formation of head‐to‐tail (H–T) poly[3‐(4‐butylphenyl)thiophene] by oxidative coupling polymerization with a catalytic amount of vanadium acetylacetonate was investigated. Polymerization was carried out in the presence of vanadium acetylacetonate, trifluoromethane sulfonic acid, and trifluoroacetic anhydride under an oxygen atmosphere in 1,2‐dichloroethane at room temperature. Polymers and oligomers obtained after several polymerization times were characterized by gel permeation chromatography, IR, and NMR spectroscopies. With these findings and the reactivity of monomer and dimers based on ab initio density functional theory, the polymerization was found to proceed mainly through the formation of H–T linkages due to the high spin density at the 2‐position of 3‐(4‐butylphenyl)thiophene and the calculated total energy of dimers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2287–2295, 2001     

Synthesis and characterization of new highly organosoluble poly(etherimide)s derived from 1,1‐bis{4‐[4‐(3,4‐dicarboxyphenoxy)phenyl]‐4‐phenylcyclohexane} dianhydride

A new bulky pendent bis(ether anhydride), 1,1‐bis[4‐(4‐dicarboxyphenoxy)phenyl]‐4‐phenylcyclohexane dianhydride, was prepared in three steps, starting from the nitrodisplacement of 1,1‐bis(4‐hydroxyphenyl)‐4‐phenylcyclohexane with 4‐nitrophthalonitrile to form bis(ether dinitrile), followed by alkaline hydrolysis of the bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s were prepared from the bis(ether anhydride) with various diamines by a conventional two‐stage synthesis including polyaddition and subsequent chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.50–0.73 dL g^?1. The gel permeation chromatography measurements revealed that the polymers had number‐average and weight‐average molecular weights of up to 57,000 and 130,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility in comparison with the other polyimides derived from adamantane, norbornane, cyclododecane, and methanohexahydroindane and were readily dissolved in various solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. These polymers had glass‐transition temperatures of 226–255 °C. Most of the polymers could be dissolved in chloroform in as high as a 30 wt % concentration. Thermogravimetric analysis showed that all polymers were stable up to 450 °C, with 10% weight losses recorded from 458 to 497 °C in nitrogen. These transparent, tough, and flexible polymer films could be obtained by solution casting from DMAc solutions. These polymer films had tensile strengths of 79–103 MPa and tensile moduli of 1.5–2.1 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2066–2074, 2002     

Water‐soluble fluorene‐based copolymers incorporated methoxyphenol moieties: Novel polymeric chemodosimeters for hypochlorous acid

A series of water‐soluble copolymers, named N‐PFPx (x = 10, 25, and 50), and their model compound 6,6',6'',6'''‐(2,2'‐(2‐hydroxy‐5‐methoxy‐1,4‐phenylene)bis(9H‐fluorene‐9,9,2‐triyl))tetrakis(N,N,N‐trimethylhexan‐1‐aminium) bromide (FMOPF) were synthesized by Suzuki coupling reaction of fluorene derivatives and p‐methoxyphenol. For the polymers with relatively low contents of methoxyphenol (N‐PFP10 and N‐PFP25), the absorption and fluorescence spectra could be mainly ascribed to the polyfluorene, whereas for the polymer N‐PFP50 and the model compound FMOPF, the absorption and fluorescence spectra could be assigned to the fluorene‐alt‐methoxyphenol. All the conjugated polymers (CPs), regardless of the content of methoxyphenol moieties, exhibit good sensitivity to hypochlorite/hypochlorous acid (HClO) because of the superquenching effect of CPs. On the contrary, the absorption changes of the polymers N‐PFPx on the addition of hypochlorite/HClO depend on the content of methoxyphenol moieties. As the content of methoxyphenol moieties increase, the changes of absorption spectra become more intense. Considering the sensitivity and selectivity, the polymer N‐PFP10 and N‐PFP25 have been demonstrated to be good polymeric fluorescent probes to hypochlorite under the aqueous condition. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyimides from isomeric oxydiphthalic anhydrides

2,2′,3,3′‐Oxydiphthalic dianhydride (2,2′,3,3′‐ODPA) and 2,3,3′,4′‐ODPA were synthesized from 3‐chlorophthalic anhydride with 2,3‐xylenol and 3,4‐xylenol, respectively. Their structures were determined via single‐crystal X‐ray diffraction. A series of polyimides derived from isomeric ODPAs with several diamines were prepared in dimethylacetamide (DMAc) with the conventional two‐step method. Matrix‐assisted laser desorption/ionization time‐of‐flight spectra showed that the polymerization of 2,2′,3,3′‐ODPA with 4,4′‐oxydianiline (ODA) has a greater trend to form cyclic oligomers than that of 2,3,3′,4′‐ODPA. Both 2,2′,3,3′‐ODPA and 2,3,3′,4′‐ODPA based polyimides have good solubility in polar aprotic solvents such as DMAc, dimethylformamide, and N‐methylpyrrolidone. The 5% weight‐loss temperatures of all polyimides were obtained near 500 °C in air. Their glass‐transition temperatures measured by dynamic mechanical thermal analysis or differential scanning calorimetry decreased according to the order of polyimides on the basis of 2,2′,3,3′‐ODPA, 2,3,3′,4′‐ODPA, and 3,3′,4,4′‐ODPA. The wide‐angle X‐ray diffraction of all polyimide films from isomeric ODPAs and ODA showed some certain extent of crystallization after stretching. Rheological properties revealed that polyimide (2,3,3′,4′‐ODPA/ODA) has a comparatively lower melt viscosity than its isomers, which indicated its better melt processability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3249–3260, 2003     

3‐Phenylethynyl phthalimide end‐capped imide oligomers and the cured polymers

In the past decades, 4‐phenylethynyl phthalic anhydride (4‐PEPA) has been the most important endcapper used for thermoset polyimide. As the isomer of4‐PEPA, 3‐phenylethynyl phthalic anhydride (3‐PEPA) has attracted our interest. In this article, 3‐PEPA was synthesized and a comparative study with 4‐PEPA on curing temperature, curing rate, thermal and mechanical properties of oligomers and cured polymers was presented. The new phenylethynyl endcapped model compound, N‐phenyl‐3‐phenylethynyl phthalimide, was synthesized and characterized. The molecular structure of model compound was determined via single‐crystal X‐ray diffraction and the thermal curing process was investigated by Fourier transform infrared. Differential scanning calorimetry clearly showed that the model compound from 3‐PEPA had about 20 °C higher curing onset and peak temperature than the 4‐PEPA analog. This result was further proved by the dynamic rheological analysis that the temperature of minimum viscosity for oligomers end‐capped with 3‐PEPA was above 20 °C higher than that of the corresponding 4‐PEPA endcapped oligomers with the same calculated number average molecular weight. The cured polymer from 3‐PEPA displayed slightly higher thermal oxidative stability than those from 4‐PEPA by thermogravimetric analysis. The thermal curing kinetics of 3‐PEPA endcapped oligomer (OI‐5) and 4‐PEPA endcapped oligomer (OI‐6) fitted a first‐order rate law quite well and revealed a similar rate acceleration trend. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4227–4235, 2008     

Synthesis of 1‐methoxypoly(oxyethylene)benzocyclobutene and its diels–alder reactions

A new poly(ethylene glycol) derivative, 1‐methoxypoly(oxyethylene)benzocyclobutene ( 1 ) was prepared from the reaction of 1‐benzocyclobutenyl 1‐hydroxyethyl ether with mesylate of methoxypoly(oxyethylene) in tetrahydrofuran. The degree of end‐group conversion, as determined by NMR, was 100%. The Diels–Alder reactions of 1 with maleic anhydride and N‐phenylmaleimide were carried out in refluxing toluene to obtain the corresponding adducts ( 2 and 3 , respectively) in excellent yields. NMR analyses of 2 and 3 indicated complete conversion of 1 to the corresponding products. The reaction of 2 with o‐toluidine resulted in complete conversion of the anhydride adduct to the corresponding products. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1934–1938, 2004     

Synthesis of highly refractive and transparent polyimides derived from 4,4′‐thiobis[2″,6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline]

New sulfur‐containing aromatic diamines with methyl groups at the ortho position of amino groups have been developed to prepare highly refractive and transparent aromatic polyimides (PIs) in the visible region. All aromatic PIs derived from 4,4′‐thiobis[2″‐methyl‐4″‐(p‐phenylenesulfanyl)aniline ( 2 ), 4,4′‐thiobis[2,″6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline ( 5 ), and aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride ( 6 ) were prepared via a two‐step polycondensation. All PIs showed good thermal properties, such as 10% weight loss temperature in the range of 497–500 °C and glass transition temperatures above 196 °C. In addition, the PIs showed good optical properties, such as optical transparency above 75% at 450 nm with a 10‐μm film thickness, high refractive indices ranging from 1.7135 to 1.7301, and small in‐plane/out‐of‐plane birefringences between 0.0066 and 0.0076. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 656–662, 2010     

Synthesis and characterization of soluble polyimides derived from 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride

A novel bis(ether anhydride) monomer, 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide ion of 2′,5′‐dihydroxy‐p‐terphenyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and cyclodehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s bearing laterally attached p‐terphenyl groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal or chemical imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were in the range of 0.62–1.26 dL/g. Most of the poly(ether imide)s obtained from both routes were soluble in polar organic solvents, such as N,N‐dimethylacetamide. All the poly(ether imide)s could afford transparent, flexible, and strong films with high tensile strengths. The glass‐transition temperatures of these poly(ether imide)s were recorded as between 214 and 276 °C by DSC. The softening temperatures of all the poly(ether imide) films stayed in the 207–265 °C range according to thermomechanical analysis. For all the polymers significant decomposition did not occur below 500 °C in nitrogen or air atmosphere. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1008–1017, 2004     

Synthesis of well‐defined copolymer of acrylonitrile and maleic anhydride via RAFT polymerization

Well‐defined copolymer of acrylonitrile (AN) and maleic anhydride (MAn) has been successfully synthesized via reversible addition‐fragmentation chain transfer polymerization. The polymerization kinetics and “living”/controlled features were thoroughly studied and confirmed. The thermal properties and spinnability of the prepared copolymers were investigated via differential scanning calorimetry, thermogravimetric analyzer, and electrospinning subsequently. When PAN‐co‐PMAn was used as precursors, nonwoven with “crosslinked” structures was obtained during electrospinning. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5263–5269     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Synthesis and characterization of new highly organosoluble poly(ether imide)s based on 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride

A new bis(ether anhydride), 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride ( 3 ), was prepared in three steps: the nitro displacement of 4‐nitrophthalonitrile with 2,2‐bis(4‐hydroxy‐3,5‐dimethylphenyl)propane, the alkaline hydrolysis of the intermediate bis(ether dinitrile), and the subsequent dehydration of the resulting bis(ether diacid). A series of new highly soluble poly(ether imide)s with tetramethyl and isopropylidene groups were prepared from the bis(ether anhydride) 3 with various diamines by a conventional two‐stage synthesis including polyaddition and chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.54–0.73 dL g^?1. Gel permeation chromatography measurements revealed that the polymers had number‐average and weight‐average molecular weights of up to 54,000 and 124,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility and were readily dissolved in various solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. Most of the polymers could be dissolved with chloroform concentrations as high as 30 wt %. These polymers had glass‐transition temperatures of 244–282 °C. Thermogravimetric analysis showed that all polymers were stable, with 10% weight losses recorded above 463 °C in nitrogen. These transparent, tough, and flexible polymer films were obtained through solution casting from N,N‐dimethylacetamide solutions. These polymer films had tensile strengths of 81–102 MPa and tensile moduli of 1.8–2.0 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2556–2563, 2002     

Synthesis and properties of alternating copolyamide‐imides based on 2,6‐bis(4‐aminophenoxy)naphthalene and comparison with its related isomeric polymers

A series of novel polyamide‐imides III containing 2,6‐bis(phenoxy)naphthalene units were synthesized by 2,6‐bis(4‐aminophenoxy)naphthalene and various bis(trimellitimide)s in N‐methyl‐2‐pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents through direct polycondensation. The polymers were obtained in quantitative yield with inherent viscosities up to 1.53 dL/g. Most of the polymers showed good solubility in NMP, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide and could be solution‐cast into transparent, flexible, and tough films. The films had tensile strengths of 84–111 MPa, elongations at break of 8–33%, and initial moduli of 2.2–2.8 GPa. Wide‐angle X‐ray diffraction revealed that most polymers III were amorphous. The glass‐transition temperatures of some of the polymers could be determined by differential scanning calorimetry traces, recorded at 247–290 °C. The polyamide‐imides exhibited excellent thermal stabilities and had 10% weight loss at temperatures in the range of 501–575 °C under nitrogen atmosphere. They left more than 57% residue even at 800 °C in nitrogen. A comparative study of some corresponding polyamide‐imides is also presented. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2591–2601, 2001     

Synthesis of cyclic poly(l‐lactide) catalyzed by Bismuth Salicylates—A combination of two drugs

l ‐lactide was polymerized in bulk at 160 or 180°C with mixtures of bismuth subsalicylate (BiSub) and salicylic (SA) as catalysts. The SA/Bi ratio and the monomer/Bi ratio were varied. The highest molecular weights (weight average, Mw) were achieved at a SA/Bi ratio of 1/1 (Mw up to 92 000 g mol^?1). l ‐Lactide was also polymerized with combinations of BiSub and silylated SA, and Mw values up to 120 000 g mol^?1 were achieved at 180°C. MALDI‐TOF mass spectrometry and Mark‐Houwink‐Sakurada measurements proved that under optimized reaction conditions the resulting polylactides consist of cycles. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2056–2063     

Synthesis of alkaline‐developable,photosensitive hyperbranched polyimides through the reaction of carboxylic acid dianhydrides and trisamines

Hyperbranched polyimides (HBPI)s with high glass‐transition temperatures and excellent thermal stability were synthesized through the reaction of commercially available carboxylic acid dianhydrides with tris[4‐(4‐aminophenoxy)phenyl]ethane (TAPE). In particular, hyperbranched polyimide HBPI(TAPE‐DSDA), prepared through the reaction of TAPE with 3,3′,4,4′‐diphenylsulfonetetracarboxylic dianhydride (DSDA), showed higher thermal stability and good solubility. Furthermore, alkaline‐developable, photosensitive HBPI(TAPE‐DSDA)‐MA‐CA was prepared through the reaction of HBPI(TAPE‐DSDA) with glycidyl methacrylate with tetrabutylammonium bromide as a catalyst in N‐methyl‐2‐pyrrolidinone (NMP) followed by the addition reaction of cis‐1,2,3,6‐tetrahydrophthalic anhydride with triphenylphosphine as a catalyst in NMP. The glass‐transition temperatures of HBPI(TAPE‐DSDA)‐MA‐CA were greater than 300 °C. A resist composed of 74 wt % HBPI(TAPE‐DSDA)‐MA‐CA, 22.2 wt % trimethylpropane triacrylate, and 3.8 wt % Irgacure 907 as a photoinitiator achieved a resolution of a 55‐μm line pattern and a 275‐μm space pattern by UV irradiation (1000 mJ/cm²). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3697–3707, 2004