Investigation of the reaction of some unsaturated dicarboxylic acid anhydrides with cyclic carbonates

This work reports attempts to extend to unsaturated anhydrides the rapid reaction of dicarboxylic acid anhydrides with ethylene carbonate to form polymer directly. The reaction of unsaturated diacid anhydrides with two cyclic carbonates, ethylene and propylene carbonate, leads to gelled products whenever the anhydride is capable of Michael addition, while an anhydride without such unsaturation gave linear polymer in- stead. The GC/MS results, along with efforts to trap radical reactions, support Michael addition as an explanation of gelation in these systems.     

In situ polymerization and morphology of polypyrrole obtained in water‐soluble polymer templates

Several water‐soluble polymers were used as templates for the in situ polymerization of pyrrole to determine their effect on the generation of nanosized polypyrrole (PPy) particles. The polymers used include: polyvinyl alcohol (PVA), polyethylene oxide (PEO), poly(vinyl butyral), polystyrene sulfonic acid, poly(ethylene‐alt‐maleic anhydride) (PEMA), poly(octadecene‐alt‐maleic anhydride), poly(N‐vinyl pyrrolidone), poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate), poly(N‐isopropyl acrylamide), poly(ethylene oxide‐block‐propylene oxide), hydroxypropyl methyl cellulose, and guar gum. The oxidative polymerization of pyrrole was carried out with FeCl₃ as an oxidant. The morphology of PPy particles obtained after drying the resulting aqueous dispersions was examined by optical microscopy, and selected samples were further analyzed via atomic force microscopy. Among the template polymers, PVA was the most efficient in generating stable dispersions of PPy nanospheres in water, followed by PEO and PEMA. The average size of PPy nanospheres was in the range of 160 nm and found to depend on the molecular weight and concentration of PVA. Model reactions and kinetics of the polymerization reaction of pyrrole in PVA were carried out by hydrogen ¹H NMR spectroscopy using ammonium persulfate as an oxidant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Radiochemical aging of ethylene–propylene–diene monomer elastomers. I. Mechanism of degradation under inert atmosphere

This article is devoted to the study of electron‐beam‐induced degradation under argon atmosphere of an ethylene–propylene–diene monomer (EPDM, based on 5‐ethylidene 2‐norbornene) and an ethylene–propylene rubber (EPR) containing the same molar ratio of ethylene/propylene. The chemical structure modifications of polymeric samples were analyzed by ultraviolet–visible and IR spectroscopies. Crosslinking reactions were deduced by measuring the changes in gel fraction and the degree of swelling in n‐heptane. Irradiation of EPDM and EPR created trans‐vinylene, vinyl, vinylidene, and dienic‐type unsaturations. The radiochemical yields for unsaturation formations in EPDM and EPR were similar. Degradation also involved crosslinking and the production of molecular hydrogen. The comparison between EPDM and EPR showed that the diene (in which a double bond is consumed with a high radiochemical yield) contributes to the increase in rate and intermolecular bridges density. Mechanisms are proposed to account for the main routes of EPDM degradation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1239–1248, 2004     

Synthesis of a poly(vinyl ether) containing a benzocyclobutene moiety and its reaction with dienophiles

1‐Benzocyclobutenyl vinyl ether (1) was easily prepared by the elimination reaction of hydrogen bromide from 1‐benzocyclobutenyl 1‐bromoethyl ether obtained by 1‐bromobenzocyclobutene and ethylene glycol via two steps in a good yield. Cationic polymerizations of 1 was carried out at −78°C for 2 h in toluene in the presence of BF₃OEt₂ as an initiator to give quantitatively the corresponding polymers (2) as white solids. As a model reaction of the polymer reaction of 2 with dienophiles, the Diels–Alder reactions of 1‐methoxybenzocyclobutene with maleic anhydride (MA) in toluene at 100–140°C for 3 h were carried out to obtain the corresponding Diels–Alder adduct quantitatively at 140°C. The polymer reactions of 2 with MA and N‐phenylmaleimide (MI) in toluene were carried out to yield the corresponding Diels–Alder adduct polymers in good yields. The degree of introduction of the dienophile could be controlled by temperature, and the unreacted benzocyclobutene moiety could further react with another benzocyclobutene moiety or dienophile. The properties (solubilities, T_g, and temperature of 10% weight loss) of the polymers obtained from the polymer reaction were quite different from those of 2. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 59–67, 1999     

Highly active bifunctional cobalt‐salen complexes for the synthesis of poly(ester‐block‐carbonate) copolymer via terpolymerization of carbon dioxide,propylene oxide,and norbornene anhydride isomer: Roles of anhydride conformation consideration

This article describes an efficient synthetic route of defined reactive polyester‐block‐polycarbonate copolymers, utilizing a bifunctional SalenCoNO₃ complex as catalyst for the single‐step terpolymerization of norbornene anhydride (NA), propylene oxide, and carbon dioxide. The geometric isomer of NA plays an important role in polymerization efficacy and the resulting polymer microstructure, including carbonate content, sequence isomer of polycarbonate moiety, and molecular weight. A hydroxyl‐functionalized polyester–polycarbonate block copolymer was synthesized by a thiol‐ene reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 789–795     

Synthesis of 1‐methoxypoly(oxyethylene)benzocyclobutene and its diels–alder reactions

A new poly(ethylene glycol) derivative, 1‐methoxypoly(oxyethylene)benzocyclobutene ( 1 ) was prepared from the reaction of 1‐benzocyclobutenyl 1‐hydroxyethyl ether with mesylate of methoxypoly(oxyethylene) in tetrahydrofuran. The degree of end‐group conversion, as determined by NMR, was 100%. The Diels–Alder reactions of 1 with maleic anhydride and N‐phenylmaleimide were carried out in refluxing toluene to obtain the corresponding adducts ( 2 and 3 , respectively) in excellent yields. NMR analyses of 2 and 3 indicated complete conversion of 1 to the corresponding products. The reaction of 2 with o‐toluidine resulted in complete conversion of the anhydride adduct to the corresponding products. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1934–1938, 2004     

Polycarbonate particles and dye‐labeled particles by miniemulsion polymerization

We describe the synthesis of several different polycarbonate particles by miniemulsion polymerization. The monomers were allylmethyl carbonate (AlMeC), di(ethylene glycol) bisallylcarbonate (DBAC), and 4‐vinyl‐1,3‐dioxan‐2‐one [vinyl ethylene carbonate (VEC)]. For these polymerizations, higher monomer conversions were obtained with oil‐soluble initiators (azobisisobutyronitrile and benzoyl peroxide) than with a water‐soluble initiator (potassium persulfate). Benzoyl peroxide was particularly effective in yielding particles with a narrow size distribution. Although increasing amounts of a surfactant (sodium dodecyl sulfate) led to smaller particles, the choice of the monomer was the major determinant. For example, in polymerization reactions carried out at 85 °C with benzoyl peroxide as the initiator and with otherwise identical recipes, we obtained particle sizes of 181 nm with AlMeC, 296 nm with VEC, and 203 nm with DBAC. Fluorescent particles were synthesized with comonomers based on the benzothioxanthene nucleus. Because the dyes had poor solubility in the monomers, it was necessary to include typically 20 wt % bromobenzene or dichlorobenzene based on the monomer in the miniemulsion reaction mixture. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1999–2009, 2004     

Synthesis of an alkali‐swellable emulsion and its effect on the rate of polymer diffusion in poly(vinyl acetate‐butyl acrylate) latex films

We describe the synthesis and characterization of a weakly cross‐linked poly(methacrylic acid‐co‐ethyl acrylate) alkali‐swellable emulsion (ASE), as well as an investigation of its influence on the rate of polymer diffusion in latex films. The films examined were formed from poly(vinyl acetate‐co‐butyl acrylate) latex particles containing a small amount of acrylic acid as a comonomer. Polymer diffusion rates were monitored by the energy transfer technique. We found that the presence of the ASE component, either in the acid form or fully neutralized by ammonia or sodium hydroxide, had very little effect on the polymer diffusion rate. However, in the presence of 2 wt % NH₄‐ASE, there was a small but significant increase in the polymer diffusion rate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5632–5642, 2005     

Polymer cyclization inhibits thermal decomposition of carbon‐dioxide‐derived poly(propylene carbonate)s

Remarkable enhancement of CO₂‐derived poly(propylene carbonate) (PPC) against thermal decomposition was achieved by cyclization of linear PPCs. Thus, a CO₂‐derived linear vinyl‐telechelic PPC was synthesized by CO₂–propylene oxide alternating copolymerization initiated from H₂O followed by an end‐capping esterification with 4‐pentenoic acid. Cyclic PPC was synthesized by the end‐to‐end intramolecular reaction of the vinyl‐telechelic linear PPC by metathesis condensation. Comparison of the thermal decomposition temperature (T_d) with linear and cyclic PPCs confirms surprisingly enhanced T_ds of cyclic PPCs. The elimination of chain ends through cyclization is indeed valuable for enhancing T_d of CO₂‐derived PPCs and thus turn the spotlight on the materials design utilizing CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3336–3342     

Synthesis and characterization of novel degradable photocrosslinked poly(ether‐anhydride) networks

New degradable poly(ether‐anhydride) networks were synthesized by UV photopolymerization. Dicarboxylated poly(ethylene glycol) (PEG) or poly(tetramethylene glycol) (PTMG) was reacted with an excess of methacrylic anhydride to form dimethacrylated macromers containing anhydride linkages. The percent of conversion for the macromer formation was more than 80% at 60 °C after 24 h. ¹H NMR and IR spectroscopies show the presence of anhydride linkages in the macromer. In vitro degradation studies were carried out at 37 °C in PBS with crosslinked polymer networks formed by UV irradiation. All PEG‐based polymers degraded within 2 days, while PTMG‐based polymers degraded by 50% of the initial weight after 14 days. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1277–1282, 2000     

Synthesis and characterization of poly(ethylene oxide‐co‐ethylene carbonate) macromonomers and their use in the preparation of crosslinked polymer electrolytes

Methacrylate‐functionalized poly(ethylene oxide‐co‐ethylene carbonate) macromonomers were prepared in two steps by the anionic ring‐opening polymerization of ethylene carbonate at 180 °C, with potassium methoxide as the initiator, followed by the reaction of the terminal hydroxyl groups of the polymers with methacryloyl chloride. The molecular weight of the polymer went through a maximum after approximately 45 min of polymerization, and the content of ethylene carbonate units in the polymer decreased with the reaction time. A polymer having a number‐average molecular weight of 2650 g mol^?1 and an ethylene carbonate content of 28 mol % was selected and used to prepare a macromonomer, which was subsequently polymerized by UV irradiation in the presence of different concentrations of lithium bis(trifluoromethanesulfonyl)imide salt. The resulting self‐supportive crosslinked polymer electrolyte membranes reached ionic conductivities of 6.3 × 10^?6 S cm^?1 at 20 °C. The coordination of the lithium ions by both the ether and carbonate oxygens in the polymer structure was indicated by Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2195–2205, 2006     

Activated Monomers and Nucleophilic Reagents in Addition and Polymerization Reactions

A number of examples of addition and polymerization reactions is presented with special emphasis on the chemical behaviors of activated monomers and/or activated nucleophilic reagents. Lithium alkoxyethanolate forms a complex with lithium alkyl. Spectroscopic studies showed this complex to possess agent-separated ion pairs. The nature of the complex is characterized by the enhanced reactivity of styrene in the copolymerization reaction with butadiene initiated by the complex. Magnesium alkyl can be sufficiently activated by magnesium alkoxyethanolate to polymerize styrene and diene. Aluminum alkyl and zinc alkyl are able to induce the anionic polymerization of vinyl ketones, but not of unsaturated esters or nitriles. Aluminum or zinc alkoxyethanolates fail to activate their corresponding metal alkyls. Bipyridyl, sparteine, triphenylphosphine, HMPT, and related Lewis bases, however, activate aluminum alkyl enough to react with carbon-carbon double bonds of the unsaturated esters and nitriles. Crotononitrile can be polymerized by the AIR₃-HMPT system to form a colorless polymer, where possible side reactions between CN and AIR₃ are prevented by HMPT. Mutual activation through complex formation is confirmed by a model system of a vinyl ketone with organozinc compounds. AIR₃-HMPT does not polymerize vinyl ketones because of a lack of complex formation. N-Carboxy-α-alanine anhydride (NCA) can be polymerized with zinc alkyl as initiator. The formation of activated NCA by proton abstraction from the NH group is shown to be the essential stage for polymerization. Zinc alkyl is also activated by conventional acid anhydrides. The propylene oxide ring can be cleaved with the ZnR₂-phthalic anhydride system, which is the initiation step in the alternate copolymerization between propylene oxide and the acid anhydride. The propagation mechanism of the CO₂-epoxide copolymerization is also discussed.     

Solid polymer electrolytes I,preparation, characterization,and ionic conductivity of gelled polymer electrolytes based on novel crosslinked siloxane/poly(ethylene glycol) polymers

A series of crosslinked siloxane/poly(ethylene glycol) (Si–PEG) copolymers were synthesized from the reactive methoxy‐functional silicone resin (Si resin) and PEGs with different molecular weights via two kinds of crosslinking reactions during an in situ curing stage. One of the crosslinking reactions is the self‐condensation between two methoxy groups in the Si resin, and another one is an alkoxy‐exchange reaction between the methoxy group in the Si resin and the OH group in PEG. The synthesized crosslinked copolymers were characterized by Fourier transform infrared spectroscopy, DSC, and ¹³C NMR. The crosslinked copolymers were stable in a moisture‐free environment, but the Si? O? C linkages were hydrolyzed in humid conditions. The gel‐like solid polymer electrolytes (SPEs) were prepared by impregnating these crosslinked Si–PEG copolymers in a propylene carbonate (LiClO₄/PC) solution. The highest conductivity reached 2.4 × 10^?4 S cm^?1 at 25 °C and increased to 8.7 × 10^?4 S cm^?1 at 85 °C. The conductivities of these gel‐type SPEs were affected by the content of LiClO₄/PC, the molecular weights of PEGs, and the weight fraction of the Si resin. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2051–2059, 2004     

Stabilization of water/n‐hexane emulsions by amphiphilic copolymers based on vinyl ethers and their polycomplexes with poly(acrylic acid)

Amphiphilic random copolymers based on vinyl ether of ethylene glycol and vinyl butyl ether as well as their polycomplexes with poly(acrylic acid) were studied as polymeric reagents for the stabilization of water/n‐hexane emulsions. The emulsion stability strongly depended on the content of vinyl butyl ether in the copolymers as well as their concentration in solution. The more hydrophobic copolymers stabilized emulsions more efficiently. An increase in the temperature and the addition of inorganic salts reduced the emulsion lifetime. The formation of interpolymer complexes between the copolymers and poly(acrylic acid) significantly influenced the stability of the emulsions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2625–2632, 2004     

Alternating Copolymerization of Propylene Oxide with Biorenewable Terpene‐Based Cyclic Anhydrides: A Sustainable Route to Aliphatic Polyesters with High Glass Transition Temperatures

The alternating copolymerization of propylene oxide with terpene‐based cyclic anhydrides catalyzed by chromium, cobalt, and aluminum salen complexes is reported. The use of the Diels–Alder adduct of α‐terpinene and maleic anhydride as the cyclic anhydride comonomer results in amorphous polyesters that exhibit glass transition temperatures (T_g) of up to 109 °C. The polymerization conditions and choice of catalyst have a dramatic impact on the molecular weight distribution, the relative stereochemistry of the diester units along the polymer chain, and ultimately the T_g of the resulting polymer. The aluminum salen complex exhibits exceptional selectivity for copolymerization without transesterification or epimerization side reactions. The resulting polyesters are highly alternating and have high molecular weights and narrow polydispersities.     

Polymerization of alkenes with a post‐metallocene catalyst containing a titanium complex with an oxyquinolinyl ligand

Polymerization reactions of ethylene, propylene, higher 1‐alkenes (1‐hexene, 1‐octene, 1‐decene, vinyl cyclohexane, 3‐methyl‐1‐butene), and copolymerization reactions of ethylene with 1‐octene with a post‐metallocene catalyst containing an oxyquinolinyl complex of Ti and a combination of Al(C₂H₅)₂Cl and Mg(C₄H₉)₂ as a cocatalyst were studied. The catalyst is highly active and, judging by the broad molecular weight distribution of the polymers, contains several active center populations. The active centers differ not only in their kinetic parameters but also in stereospecificity. Most of the active centers produce essentially atactic polypropylene but a small fraction of the centers produces polypropylene of moderate isotacticity degree. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1844–1854     

Anionic bulk oligomerization of ethylene and propylene carbonate initiated by bisphenol‐A/base systems

When the bulk oligomerization of 1,3‐dioxolan‐2‐one (ethylene carbonate, EC) and 4‐methyl‐1,3‐dioxolan‐2‐one (propylene carbonate, PC) with the 2,2‐bis(4‐hydroxyphenyl)propane (bisphenol‐A, BPA)/base system (bases such as KHCO₃, K₂CO₃, KOH, Li₂CO₃, and t‐BuOK) was investigated at elevated temperature, significant differences were observed. Oligomerization of EC initiated by BPA/base readily takes place, but the oligomerization of PC is inhibited. The very first propylene carbonate/propylene oxide unit readily forms a phenolic ether bond with the functional groups of BPA phenolate, but the addition of the second monomer unit is rather slow. The oligomerization of EC yields symmetrical oligo(ethylene oxide) side chains. According to IR studies the oligomeric chains formed from PC with BPA contain not only ether but also carbonate bonds. The in situ step oligomerization of the BPA dipropoxylate was also identified by SEC, and a possible reaction mechanism is proposed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 545–550, 1999     

Copolymerization of propylene with 1,3‐butadiene using isospecific zirconocene catalysts

Poly(propylene‐ran‐1,3‐butadiene) was synthesized using isospecific zirconocene catalysts and converted to telechelic isotactic polypropylene by metathesis degradation with ethylene. The copolymers obtained with isospecific C₂‐symmetric zirconocene catalysts activated with modified methylaluminoxane (MMAO) had 1,4‐inserted butadiene units ( 1,4‐BD ) and 1,2‐inserted units ( 1,2‐BD ) in the isotactic polypropylene chain. The selectivity of butadiene towards 1,4‐BD incorporation was high up to 95% using rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride (Cat‐A)/MMAO. The molar ratio of propylene to butadiene in the feed regulated the number‐average molecular weight (M_n) and the butadiene contents of the polymer produced. Metathesis degradations of the copolymer with ethylene were conducted with a WCI₆/SnMe₄/propyl acetate catalyst system. The ¹H NMR spectra before and after the degradation indicated that the polymers degraded by ethylene had vinyl groups at both chain ends in high selectivity. The analysis of the chain scission products clarified the chain end structures of the poly(propylene‐ran‐1,3‐butadiene). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5731–5740, 2007     

New polymer syntheses. CXI. Aliphatic polyesters by the ring‐opening polycondensation of glutaric anhydride with ethylene or trimethylene carbonate

Several polycondensations of ethylene carbonate with succinic anhydride or glutaric anhydride (GA) were conducted in bulk. Low molar mass polyesters were obtained with pyridine‐type catalysts and GA. Analogous polycondensations of trimethylene carbonate (TMC) and GA were successful when quinoline, 4‐(N,N‐dimethylamino)pyridine, or BF₃ · OEt₂ was used as a catalyst. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed the formation of cyclic oligoesters and polyesters by backbiting degradation. Monomer mixtures containing an excess of TMC yielded copoly(ester carbonate)s with number‐average molecular weights up to 16,000 Da. Analogous copoly(ester carbonate)s were obtained from TMC and 3,3′‐tetramethylene glutaric anhydride. Furthermore, combined polycondensation/ring‐opening polymerization reactions of TMC and GA with L ‐lactide or ?‐caprolactone were studied. All copolymers were characterized by viscosity measurements and by IR, ¹H, and ¹³C NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4357–4367, 2002     

Characterization,morphology, thermal and mechanical properties of conductive polyaniline‐functionalized EPDM elastomers obtained by casting

Conductive elastomeric blends based on ethylene–propylene–5‐ethylidene–2‐norbornene terpolymer (EPDM) and polyaniline doped with 4‐dodecylbenzenesulfonic acid [PAni(DBSA)] were cast from organic solvents. Functionalization of the elastomer was promoted by grafting with maleic anhydride. Vulcanization conditions were optimized with an oscillating disk rheometer. The conductivity, morphology, thermal stability, compatibility, and mechanical behavior of the obtained mixtures were analyzed by in situ direct current conductivity measurements, atomic force microscopy, transmission electron microscopy, wide‐angle X‐ray scattering, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical thermal analysis, stress–strain and hysteresis tests. The vulcanization process was affected by temperature, the PAni content, and maleic anhydride. A reinforcement effect was promoted by the vulcanizing agent. The formation of links between the high‐molar‐mass phases and oligomers of PAni(DBSA) in the elastomeric matrix enhanced the thermal stability and ultimate properties of the blends. By the appropriate control of the polymer blends' composition, it was possible to produce elastomeric materials with conductivities in the range of 10^?5–10^?4 S · cm^?1 and excellent mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1767–1782, 2004