Thermodynamic stability and retinol binding property of β-lactoglobulin in the presence of cationic surfactants

In this work the stability parameters of bovine β-lactoglobulin, variant A (BLG-A), with regard to their transition curves induced by dodecyltrimethylammonium bromide (C₁₂TAB), tetradecyltrimethylammonium bromide (C₁₄TAB) and hexadecyltrimethylammonium bromide (C₁₆TAB) as cationic surfactants, were determined at 298 K. For each transition curve, the conventional method of analysis which assumes a linear concentration dependence of the pre- and post-transition base lines, gave the most realistic values for ΔG_D(H₂O). The results represent the increase in the denaturating power of surfactants with an increase in hydrocarbon chain length. The value of about 22.27 kJ · mol^?1 was obtained for ΔG_D(H₂O) from transition curves. Subsequently, the retinol binding property of BLG as its functional indicator was investigated in the presence of these surfactants using the spectrofluorimeter titration method. The results represent the substantial enhancement of retinol binding affinity of BLG in the presence of these surfactants.     

Biophysical analysis of partially folded state of α-lactalbumin in the presence of cationic and anionic surfactants

The role of different types of interactions and their contribution in the stabilization of bovine α-lactalbumin (α-LA) molten globule in presence of cationic surfactant, hexadecyl trimethyl ammonium bromide (HTAB) and anionic surfactant, sodium dodecyl sulphate (SDS) have been examined using a combination of spectroscopic, light scattering and calorimetric techniques. The results correlated well with each other and were used to characterize the partially folded states of the protein both qualitatively and quantitatively. At lower concentration of the surfactants, the thermodynamic parameters obtained from UV-visible spectroscopy suggested an increased exposure of non-polar groups in HTAB while a possible restructuring of non-polar groups were indicated in SDS. The fluorescence and circular dichroism spectroscopy showed the formation of an intermediate state at various concentrations of HTAB and SDS while the lifetime measurements supported the assumption of protein-surfactant complex stability in HTAB as compared to SDS. The hydrodynamic diameter and the ζ-potential were analyzed by dynamic light scattering (DLS) which also implicated the combined influence of electrostatic and hydrophobic interactions in protein unfolding in HTAB and only hydrophobic interactions in SDS. The binding parameters for ANS obtained from isothermal titration calorimetric (ITC) measurements suggested a high stability of α-LA molten globule and the role of enthalpic and entropic contribution in the binding of ANS in HTAB. It also indicated the fragility of α-LA molten globule in SDS. The possible binding sites as well as the interactions of ANS with the partially folded protein were also studied from the thermodynamic parameters obtained from the ITC.     

Effect of cationic and anionic surfactants on the addition–elimination-type interaction between o-toluidine and d-glucose

The kinetics of the o-toluidine–d-glucose reaction has been studied as a function of [o-toluidine], [d-glucose], [acetic acid], and temperature by UV–visible spectrophotometry at 630 nm in the absence and presence of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS). The reaction follows second-order kinetics, being unity in each of the reactants in both media. The effect of added surfactants has also been investigated. The model of micellar catalysis, such as the Menger–Portony model modified by Bunton, is applied to explain the catalytic role of CTAB and SDS micelles. The association/incorporation constants (K _s and K _n), the rate constant in micellar media (k _m), and the activation parameters of this system have been calculated and discussed. The value of the rate constant is found to be higher in SDS than in CTAB. Hydrophobic and electrostatic interactions are responsible for higher reaction rates in SDS. From all observed facts, a reaction mechanism involving a nucleophilic addition–elimination path has been suggested.     

A comparative study on the reactivity of cationic niobium clusters with nitrogen and oxygen

We have prepared well-resolved Nb_n⁺（n=1-10） clusters and report here an in-depth study on the essentially different reactivity with N₂ and O₂,by utilizing a multiple-ion laminar flow tube reactor in tandem with a customized triple quadrupole mass spectrometer（MIFT-TQMS）.As results,the Nb_n⁺ clusters are found to readily react with N₂ and form adsorption products Nb_nN_{2 m}⁺;in contrast,the r...     

Study on the effect of rare earth metal triflates as initiators in the cationic curing of DGEBA/γ-valerolactone mixtures and characterization of the thermosets obtained

The thermal cationic curing of mixtures in different proportions of diglycidylether of bisphenol A (DGEBA) with γ-valerolactone (γ-VL) initiated by scandium, ytterbium and lanthanum triflates or a conventional BF₃·MEA initiator was investigated. The non-isothermal differential scanning calorimetry (DSC) experiments at a controlled heating rate were used to evaluate the evolution of the reactive systems. BF₃·MEA and rare earth metal triflates initiated curing systems follow a different evolution. Among rare earth metal triflates tested, the scandium was the most active initiator. The phenomenological changes that take place during curing were studied and represented in a time-temperature-transformation (TTT) diagram. Some characteristics of the materials were also evaluated.     

Crosslinking reaction in the cationic polymerization of 1, 3-pentadiene

The cationic polymerization of 1,3-pentadiene (PD) initiated by AlCl_3 in n-hexane was carried out. Effects of arenes, alkyl halides and ethers on the gel formation resulting from crosslinking reaction were investigated. The erosslinking was reduced by various arenes through a chain transfer mechanism. Alkyl halides such as tert-butyl chloride and allyl chloride could complex with AlCl_3 to generate an initiating system giving rise to a gel-free polymerization, while benzyl chloride reduced the formation of gel by chain transfer. Ethers exerted two effects on the polymerization system: giving a complex initiating system with AlCl_3 to produce a relatively high molecular weight polymer, or reducing crosslinking by lowering activity of carbocations.     

Phase and aggregation behaviour of double-chain cationic surfactants from the class of N-alkyl-N-alkyl′-N, N-dimethylammonium bromide surfactants

We present the phase diagrams and the properties of newly synthesised double-chain cationic N-alkyl-N-alkyl′-N,N-dimethylammonium bromide surfactants [C _x C _y DMABr (x = 12, 14 and 16; y = 10, 11, 12, 14 and 16)]. All the systems studied form liquid-crystalline lamellar phases but with different morphologies: unilamellar vesicles at low surfactant concentrations, multilamellar vesicles and tubular aggregates for surfactant concentrations between 2 and 10 wt% and at even higher concentrations planar bilayers of surfactant molecules in the classical L_α phase. The phase diagrams were determined with macroscopic and microscopic methods (polarisation microscopy, freeze-fracture transmission electron microscopy, scanning electron microscopy and differential interference contrast microscopy). The properties of the surfactant solutions were determined with differential scanning calorimetry measurements for Krafft point determination and small-angle neutron scattering measurements for interlamellar spacing and bilayer thickness. Finally, conductivity and viscosity measurements for phase characterisation were carried out. Received: 7 April 1999 Accepted in revised form: 30 April 1999     

Effect of medium on the equilibrium of cationic σ- and π-complexes: interconversion of 1-pentafluorophenylthio-1,2-dimethyl-acenaphthylenium and 1,2-dimethylacenaphtylene-1,2-S-pentafluorophenylepisulphonium ions

The equilibrium of 1-pentafluorophenylthio-1,2-dimethylacenaphthylenium and 1,2-dimethylacenaphthylene-1, 2-S-pentafluorophenylepisulphonium ions in different media has been investigated by¹H and¹³C NMR spectroscopy using isotope perturbation. It has been found that this equilibrium is weakly sensitive to variation in the medium.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1057–1060, June, 1993.     

Seed polymerization of tetraethyl ortho-silicate in the presence of rod-like colloidal particles of anionic palygorskite and cationic β-FeO(OH)

Kinetic analyses were made of the seed polymerization of tetraethyl ortho-silicate (TEOS) in the presence of rod-like colloidal particles of palygorskite and cationic -FeO(OH) by turbidity and dynamic light-scattering measurements. Transmission electron microscopic measurements supported the formation of core-shell particles. The seed polymerization of TEOS took place exclusively on the surfaces of palygorskite. The main cause of the observation is due to the fact that the main component of palygorskite is SiO₂ and the affinity between palygorskite and TEOS is high, though the electrostatic repulsion between them is not favorable for shell formation. The shell formation of silica on a -FeO(OH) particle also proceeded. The electrostatic attraction forces between the anionic polar TEOS monomers and cationic -FeO(OH) particles played an important role in shell formation. These results are consistent with a polymerization mechanism consisting of the formation of small preliminary particles followed by their coalescence on the surfaces of the seeds to give the final large particles coated with silica layers.     

Additions and intramolecular migrations of nucleophiles in cationic diruthenium μ-allenyl complexes

The diruthenium μ-allenyl complex [Ru₂(CO)(NCMe)(μ-CO){μ-η¹:η²-C(H)CC(Me)(Ph)}(Cp)₂][BF₄], 3b, reacts with halide anions to yield the neutral derivatives [Ru₂(CO)₂(X){μ-η¹:η²-C(H)CC(Me)(Ph)}(Cp)₂] [X = Cl, 4b; X = Br, 4c; X = I, 4d]. Complex 4b undergoes isomerization to the unprecedented bridging vinyl-chlorocarbene species [Ru₂(CO)(μ-CO){μ-η¹:η³- C(Cl)C(H)C(Me)(Ph)}(Cp)₂], 10, upon filtration of a CH₂Cl₂ solution through an alumina column.Complex 3b reacts with an excess of NaBH₄ to give five products: the allene complex [Ru₂(CO)₂{μ-η²:η²- CH₂CC(Me)(Ph)}(Cp)₂], 5; the hydride species trans-[Ru₂(CO)₂(μ-H){μ-η¹:η²-CHCC(Me)(Ph)}(Cp)₂], 6, and cis-[Ru₂(CO)₂(μ-H){μ-η¹:η²-CHCC(Me)(Ph)}(Cp)₂], 8; the vinyl-alkylidene [Ru₂(CO)(μ-CO){μ-η¹:η³- C(H)C(H)C(Me)(Ph)}(Cp)₂], 9; and the cluster [Ru₃(CO)₃(μ-H)₃(Cp)₃], 7.Studies on the thermal stabilities of 5, 6, 8 and 9 have suggested a plausible mechanism for the formation of these complexes and for the synthesis of 10.     

Synthesis and reactivity of cationic niobium and tantalum methyl complexes supported by imido and β-diketiminato ligands

The synthesis and reactivity of the cationic niobium and tantalum monomethyl complexes [(BDI)MeM(N(t)Bu)][X] (BDI = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-(i)Pr(2)C(6)H(3); M = Nb, Ta; X = MeB(C(6)F(5))(3), B(C(6)F(5))(4)] was investigated. The cationic alkyl complexes failed to irreversibly bind CO but formed phosphine-trapped acyl complexes [(BDI)(R(3)PC(O)Me)M(N(t)Bu)][B(C(6)F(5))(4)] (R = Et, Cy) in the presence of a combination of trialkylphosphines and CO. Treatment of the monoalkyl cationic Nb complex with XylNC (Xyl = 2,6-Me(2)-C(6)H(3)) resulted in irreversible formation of the iminoacyl complex [(BDI)(XylN[double bond, length as m-dash]C(Me))Nb(N(t)Bu)][B(C(6)F(5))(4)], which did not bind phosphines but would add a methide group to the iminoacyl carbon to provide the known ketimine complex (BDI)(XylNCMe(2))Nb(N(t)Bu). Further stoichiometric chemistry explored i) migratory insertion reactions to form new alkoxide, amidinate, and ketimide complexes; ii) protonolysis reactions with Ph(3)SiOH to form thermally robust cationic siloxide complexes; and iii) catalytic high-density polyethylene formation mediated by the cationic Nb methyl complex.     

Electrochemical studies of cationic drug inclusion complexes with α- andβ-cyclodextrins

Drug membrane selective electrodes have been constructed for the cationic drug propranolol hydrochloride, diphenhydramine hydrochloride, diphenylpyraline hydrochloride and also chlorcyclizine hydrochloride. The characteristics of these drug selective electrodes have been evaluated and the electrodes used to measure equilibrium constants of the inclusion compounds involving the drugs with both - and-cyclodextrins. The enthalpies and entropies associated with the formation of the inclusion complexes have also been estimated from the temperature dependence of the equilibrium constants.     

Study on the effect of chain-length compatibility of mixed anionic–cationic surfactants on the cloud-point extraction of selected organophosphorus pesticides

The chain-length compatibility of mixed anionic-cationic surfactants was investigated for the extraction of organophosphorus pesticides (OPPs). Cationic surfactants with different chain lengths (n = 12 and 16) were mixed with sodium dodecyl sulfate (SDS; n = 12) for the mixed anionic-cationic surfactants-based extraction. Six OPPs were studied including azinphos-methyl, parathion-methyl, fenitrothion, diazinon, chlorpyrifos, and prothiophos. Reversed-phase high-performance liquid chromatography was used for the determination of the studied OPPs. The extraction was performed using mixtures of SDS and cationic surfactants including dodecyltrimethyl ammonium bromide or dodecyltrimethylammonium bromide (DTAB; n = 12) and cetyltrimethyl ammonium bromide or cetyltrimethyl ammonium bromide (CTAB; n = 16). The parameters affecting the extraction efficiencies of two extraction systems were studied and discussed. The optimum condition for SDS-DTAB was 15 mmol L(-1) SDS and 1 mmol L(-1) DTAB in the presence of 15% (w/v) sodium chloride (NaCl). Meanwhile, the condition for SDS-CTAB was 10 mmol L(-1) SDS and 1.0 mmol L(-1) CTAB with 10% (w/v) NaCl. Under the optimum conditions, the extraction efficiency of SDS-DTAB (66-85%) was slightly higher than that of SDS-CTAB (61-82%). In addition, the SDS-DTAB system also gave greater enrichment factor than SDS-CTAB for all the studied OPPs. This result may be due to the compatibility of chain length between SDS and DTAB. The extraction using SDS-DTAB was successfully applied to determine OPPs in fruit samples (i.e., pomelo, apple, and pineapple). No contamination by the studied OPPs in samples was observed. Good accuracy with recoveries ranging from 77 to 105% was obtained. Low limits of detection were in the range of 0.003-0.01 mg kg(-1) which are below the MRLs established by EU-MRLs for the OPPs residues in fruit samples.     

Studies of the dissociation and the protonation of TB-chlorosulphophenol

The dissociation constant of each step for TB-chlorosulphophenol has been determined by potentiometric method, and the thermodynamic constants, △G°, △H° and △S°, of the dissociation process have been calculated. The protonation constants were measured by the spectrophotometric method. The pH values of various forms of anions of the chromogenic reagent at their concentrations were also calculated.     

Synthesis and cationic selectivity studies of novel calix[4]arene derivatives containing heteroatom at the lower rim

A series of calixarene derivatives 2―5 containing heteroatom at the lower rim have been synthesized. 1H NMR studies and crystallographic structures demonstrated that the calix[4]arene derivatives adopted cone conformations. Their cationic binding abilities and selectivities towards heavy and tran- sition metal ions have been evaluated by solvent extraction of aqueous metal picrates. The obtained results indicated that the introduction of nitrogen, sulfur, and/or phosphor atoms to the calix[4]arene framework could effectively enhance their binding ability and selectivity for heavy and transition metal ions, such as Pb2 or Ag .     

Synthesis and X-ray structure of cationic β-diimine palladium complexes containing π-methallyl ligand

High yield of cationic palladium β-diimine complexes [(CH₂(MeCNAr)₂)Pd(η³-C₄H₇)][Y] (Ar = C₆H₅, Y = PF₆ (8); 2-Me-C₆H₄, Y = PF₆ (9); 2,6-Me₂-C₆H₃, Y = PF₆ (10); 2,6-iPr₂-C₆H₃, Y = PF₆ (11), Y = B(3,5-(CF₃)₂-C₆H₃)₄ (12)) have been obtained by an oxidative addition of the methallyloxyphosphonium salts (5, 6) to a preformed complex Pd(dba)₂ (7) in the presence of the β-iminoamine ligands (1-4).These complexes are thermally stable and have been characterized by ¹H and ¹³C{¹H} NMR as well as IR spectroscopy. The structure of the cationic allyl palladium complex (12) has been solved by X-ray crystallography.     

Synthesis of polymerizable oligomers via cationic polymerization of α-oxides

A series of new polymerizable oligomers of the general formula , where R = CH₃, CH₂Cl, n = 5?40, was synthesized via cationic polymerization of propylene oxide and epichlorohydrin in the presence of tin tetrachloride and methacrylic acid or its anhydride as chain transfer agents. It was shown that the chain length of oligomers is determined by the initial monomer/regulator ratio, a relation that makes it possible to prepare oligomers with the desired molecular mass. The synthesized oligomers readily dissolve in organic solvents and polymerize and copolymerize with unsaturated monomers to give networks or branched polymers.     

Analysis of the hyperfine structures and

From the theories of the nuclear hyperfine structure (HFS) and Λ doubling of diatomic molecules, several brief algebraic equations for interpretation of HFS and Λ doubling of transitions of diatomic molecule have been developed. A few important parameters of HFS and Λ doubling of¹⁵N¹⁶O have been efficiently and accurately obtained from the analysis of the high resolution spectra of¹⁵N¹⁶O (X²∏) observed in our experiments with these equations. This method can provide an effective approach to obtain important hyperfine parameters of novel radicals from their high resolution laser magnetic resonance spectra. Liu Yu-yan, Guo Yuan-qing, Assignments of FIR-LMR spectra of CF X²∏(υ= 1) and MIR-LMR spectra of NO X²∏ (υ =1←0), Spectroscopy and Spectral Analysis (in press).     

Double-chain cationic surfactant and n-pentanol: an L3 phase in the rich-water domain?

A ternary system containing water, pentanol and a quaternary cationic surfactant, dioctadecyldimethylammonium bromide (DODAB) was investigated. We present the phase diagram and ESR studies that demonstrate the existence of the well-known L3 or sponge phase in the water-rich domain of the diagram. The remarkable fact is the existence of some kind of order in such diluted conditions.