Simple Lanthanide Amides [(Me3Si)2N]3Ln(μ-Cl)Li(THF)3 as Highly Efficient Catalysts for the Nitroaldol Reaction

This contribution is to report the application of simple lanthanide amides [(Me3Si)2N]3Ln(μ-Cl)Li(THF)3 exhibiting a high activity toward catalyzing Henry reaction of aromatic aldehydes with nitroalkanes to give β-nitroalcohols or β-nitroolefins with a very good chemoselectivity by controlling the reaction temperatures and by selecting aromatic aldehydes. It was found that this catalytic system was compatible with a wide range of substrates of aldehydes.     

A Novel Divalent Ytterbium Complex Supported by a Bridged Diamide Ligand: Synthesis and Structure of [{Me2Si(NPh)2Yb(THF)2}(μ3‐Cl)(μ4‐Cl){Li(THF)}2]2·2THF

The reaction of anhydrous YbCl₃ with 1 equiv. of Li₂Me₂Si(NPh)₂ in THF, after workup, yielded a ytterbium(III) chloride [{Me₂Si(NPh)₂Yb}(μ₂‐Cl)(TMEDA)]₂·3PhMe ( 1 ) (TMEDA=tetramethylethanediamine). The same reaction followed by treatment with Na‐K alloy afforded a new ytterbium(II) complex supported by a bridged diamide with four coordinated LiCl molecules, [{Me₂Si(NPh)₂Yb(THF)₂}(μ₃‐Cl)(μ₄‐Cl){Li(THF)}₂]₂·2THF ( 2 ) in high yield. Both complexes were structurally characterized by X‐ray analysis to be dimers. Complex 1 was a chlorine‐bridged dimer with ytterbium in a distorted octahedral geometry. In complex 2 two [Me₂Si(NPh)₂Yb(THF)₂]‐(μ₃‐Cl)[Li(THF)]₂ moieties were connected with each other by two μ₄‐Cl bridges to form a "chair‐form" framework.     

Darstellung,Charakterisierung und Reaktionsverhalten von Natrium‐ und Kaliumhydridosilylamiden R2(H)Si—N(M)R′ (M = Na,K) — Kristallstruktur von [(Me3C)2(H)Si—N(K)SiMe3]2·THF

Preparation, Characterization and Reaction Behaviour of Sodium and Potassium Hydridosilylamides R₂(H)Si—N(M)R′ (M = Na, K) — Crystal Structure of [(Me₃C)₂(H)Si—N(K)SiMe₃]₂ · THF The alkali metal hydridosilylamides R₂(H)Si—N(M)R′ 1a‐Na — 1d—Na and 1a‐K — 1d‐K ( a : R = Me, R′ = CMe₃; b : R = Me, R′ = SiMe₃; c : R = Me, R′ = Si(H)Me₂; d : R = CMe₃, R′= SiMe₃) have been prepared by reaction of the corresponding hydridosilylamines 1a — 1d with alkali metal M (M = Na, K) in presence of styrene or with alkali metal hydrides MH (M = Na, K). With NaNH₂ in toluene Me₂(H)Si—NHCMe₃ ( 1a ) reacted not under metalation but under nucleophilic substitution of the H(Si) atom to give Me₂(NaNH)Si—NHCMe₃ ( 5 ). In the reaction of Me₂(H)Si—NHSiMe₃ ( 1b ) with NaNH₂ intoluene a mixture of Me₂(NaNH)Si—NHSiMe₃ and Me₂(H)Si—N(Na)SiMe₃ ( 1b‐Na ) was obtained. The hydridosilylamides have been characterized spectroscopically. The spectroscopic data of these amides and of the corresponding lithium derivatives are discussed. The ²⁹Si‐NMR‐chemical shifts and the ²⁹Si—¹H coupling constants of homologous alkali metal hydridosilylamides R₂(H)Si—N(M)R′ (M = Li, Na, K) are depending on the alkali metal. With increasing of the ionic character of the M—N bond M = K > Na > Li the ²⁹Si‐NMR‐signals are shifted upfield and the ²⁹Si—¹H coupling constants except for compounds (Me₃C)(H)Si—N(M)SiMe₃ are decreased. The reaction behaviour of the amides 1a‐Na — 1c‐Na and 1a‐K — 1c‐K was investigated toward chlorotrimethylsilane in tetrahydrofuran (THF) and in n‐pentane. In THF the amides produced just like the analogous lithium amides the corresponding N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2a — 2c ) in high yields. The reaction of the sodium amides with chlorotrimethylsilane in nonpolar solvent n‐pentane produced from 1a‐Na the cyclodisilazane [Me₂Si—NCMe₃]₂ ( 8a ), from 1b‐Na and 1‐Na mixtures of cyclodisilazane [Me₂Si—NR′]₂ ( 8b , 8c ) and N‐silylation product 2b , 2c . In contrast to 1b‐Na and 1c‐Na and to the analogous lithium amides the reaction of 1b‐K and 1c‐K with chlorotrimethylsilane afforded the N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2b , 2c ) in high yields. The amide [(Me₃C)₂(H)Si—N(K)SiMe₃]₂·THF ( 9 ) crystallizes in the space group C2/c with Z = 4. The central part of the molecule is a planar four‐membered K₂N₂ ring. One potassium atom is coordinated by two nitrogen atoms and the other one by two nitrogen atoms and one oxygen atom. Furthermore K···H(Si) and K···CH₃ contacts exist in 9 . The K—N distances in the K₂N₂ ring differ marginally.     

Lanthanide Amide-catalyzed Aza-Henry Reaction of N-Tosyl Imines with Nitroalkanes

In the presence of 10 mol% lanthanide amide [(Me₃Si)₂N]₃Ln(µ‐Cl)Li(THF)₃, the aza‐Henry reaction of N‐tosyl imines with nitroalkanes (1:5 molar ratio) could be performed in good yields. The lanthanide amide‐catalyzed aza‐Henry reaction has the features of mild reaction conditions, tolerance of a variety of aromatic aldehyde‐derived imines and nitroalkanes, short time and good chemical yields. A catalytic mechanism for the reaction was also proposed.     

Imino‐Bridged Bisphosphaalkenes (2,4‐Diphospha‐3‐azapentadienes)

Deprotonation of aminophosphaalkenes (RMe₂Si)₂C?PN(H)(R′) (R=Me, iPr; R′=tBu, 1‐adamantyl (1‐Ada), 2,4,6‐tBu₃C₆H₂ (Mes*)) followed by reactions of the corresponding Li salts Li[(RMe₂Si)₂C?P(M)(R′)] with one equivalent of the corresponding P‐chlorophosphaalkenes (RMe₂Si)₂C?PCl provides bisphosphaalkenes (2,4‐diphospha‐3‐azapentadienes) [(RMe₂Si)₂C?P]₂NR′. The thermally unstable tert‐butyliminobisphosphaalkene [(Me₃Si)₂C?P]₂NtBu ( 4 a ) undergoes isomerisation reactions by Me₃Si‐group migration that lead to mixtures of four‐membered heterocyles, but in the presence of an excess amount of (Me₃Si)₂C?PCl, 4 a furnishes an azatriphosphabicyclohexene C₃(SiMe₃)₅P₃NtBu ( 5 ) that gave red single crystals. Compound 5 contains a diphosphirane ring condensed with an azatriphospholene system that exhibits an endocylic P?C double bond and an exocyclic ylidic P⁽⁺⁾? C^(?)(SiMe₃)₂ unit. Using the bulkier iPrMe₂Si substituents at three‐coordinated carbon leads to slightly enhanced thermal stability of 2,4‐diphospha‐3‐azapentadienes [(iPrMe₂Si)₂C?P]₂NR′ (R′=tBu: 4 b ; R′=1‐Ada: 8 ). According to a low‐temperature crystal‐structure determination, 8 adopts a non‐planar structure with two distinctly differently oriented P?C sites, but ³¹P NMR spectra in solution exhibit singlet signals. ³¹P NMR spectra also reveal that bulky Mes* groups (Mes*=2,4,6‐tBu₃C₆H₂) at the central imino function lead to mixtures of symmetric and unsymmetric rotamers, thus implying hindered rotation around the P? N bonds in persistent compounds [(RMe₂Si)₂C?P]₂NMes* ( 11 a , 11 b ). DFT calculations for the parent molecule [(H₃Si)₂C?P]₂NCH₃ suggest that the non‐planar distortion of compound 8 will have steric grounds.     

Lanthanide‐Catalyzed Selective Addition of Diethyl Phosphite to Chalcones

Lanthanide‐catalyzed addition of diethyl phosphite with chalcones was achieved under mild conditions. The reaction exhibited good product selectivity using different catalysts. γ‐Oxophosphonates were obtained in high yields in the reactions catalyzed by Yb(OAr)₃(THF)₂, while those catalyzed by [(Me₃Si)₂N]₃La(μ‐Cl)Li(THF)₃ afforded 1,2‐oxaphospholane‐5‐phosphonates as the main products in moderate to good yields. This methodology provides facile and practical approaches to the corresponding organophosphorus compounds with biological interest.     

Zum Reaktionsverhalten lithiierter Aminosilane RR′ Si(H)N(Li)SiMe3

The Reaction Behaviour of Lithiated Aminosilanes RR′Si(H)N(Li)SiMe₃ The bis(trimethylsilyl)aminosubstituted silances RR′Si(H)N(SiMe₃)₂ 11 – 16 (R,R′ = Me, Me₃SiNH, (Me₃Si)₂N) are obtained by the reaction of the lithium silylamides RR′Si(H)N(Li)SiMe₃ 1 – 10 (R,R′ = Me₃SiNLi, Me, Me₃SiNH, (M₃Si)₂N) with chlorotrimethylsilane in the polar solvent tetrahydrofurane (THF). In the reaction of the lithium silylamides [(Me₃Si)₂N]₂(Me₃SiNLi)SiH 10 with chlorotrimethylsilane in THF the rearranged product 1,1,3-tris[bis(trimethylsilyl)amino]-3-methyl-1,3-disila-butane [(Me₃Si)₂N]₂Si(H)CH₂SiMe₂N(SiMe₃)₂ 17 is formed. The reaction of the lithium silyamides RR′ Si(H)N(Li)SiMe₃ 1 – 3 (1: R = R′ = Me; 2: R = Me, R′ = Me₃SiNH; 3: R = Me, R′ = Me₃SiNLi) with chlorotrimethylsilane in the nonpolar solvent n-hexane gives the cyclodisilazanes [RR′ Si? NSiMe₃]₂ 18 – 22 (R = Me, Me₃SiNH, (Me₃Si)₂N; R′ = Me, Me₃SiNH, (Me₃Si)₂N, N(SiMe₃)Si · Me(NHSiMe₃)₂) and trimethylsilane. The lithium silylamides 4 , 5 , 6 , 9 , 10 (4: R = R′ = Me₃SiNH; 5: R = Me₃SiNH, R′ = Me₃SiNLi; 6: R = R′ = Me₃SiNLi; 9: R = (Me₃Si)₂N, R ′ = Me₃SiNLi; 10: R = R′ = (Me₃Si)₂N) shows with chlorotrimethylsilane in n-hexane no reaction. The crystal structure of 17 and 21 are reported.     

Chirale Halbsandwich‐Pentamethylcyclopentadienyl‐Rhodium(III)‐ und Iridium(III)‐Komplexe mit Schiff‐Basen aus Salicylaldehyd und α‐Aminosäureestern [1]

Chiral Half‐sandwich Pentamethylcyclopentadienyl Rhodium(III) and Iridium(III) Complexes with Schiff Bases from Salicylaldehyde and α‐Amino Acid Esters [1] A series of diastereoisomeric half‐sandwich complexes with Schiff bases from salicylaldehyde and L‐α‐amino acid esters including chiral metal atoms, [(η⁵‐C₅H₅)(Cl)M(N,O‐Schiff base)], has been obtained from chloro bridged complexes [(η⁵‐C₅Me₅)(Cl)M(μ‐Cl)]₂ (M = Rh, Ir). Abstraction of chloride from these complexes with Ag[BF₄] or Ag[SO₃CF₃] affords the highly sensitive compounds [(η⁵‐C₅Me₅)M(N,O‐Schiff base]⁺X^? (M = Rh, Ir; X = BF₄, CF₃SO₃) to which PPh₃ can be added under formation of [(η⁵‐C₅Me₅)M(PPh₃)(N,O‐Schiff base)]⁺X^?. The diastereoisomeric ratio of the complexes ( 1 ‐ 7 and 11 ‐ 12 ) has been determined from NMR spectra.     

Quinine‐Derived Imidazolidin‐2‐imine Ligands: Synthesis,Coordination Chemistry,and Application in Catalytic Transfer Hydrogenation

Two new optically active bidentate N,N‐ligands, DMIQCI ( 3a ) and DMIQCD ( 3b ), containing a quinuclidine core and an imidazolidin‐2‐imine unit, were synthesized. The reaction of these ligands with [(η⁵‐C₅Me₅)RuCl]₄ afforded the brick‐red ruthenium(II) complexes [(η⁵‐C₅Me₅)Ru(DMIQCI)Cl] ( 4 ) and [(η⁵‐C₅Me₅)Ru(DMIQCD)Cl] ( 5 ), which were used as catalysts in the transfer hydrogenation of acetophenone in boiling 2‐propanol. The reactions of 3a and 3b with [(COD)PdCl₂] (COD = 1,5‐cycloocta‐diene) and with [(DME)NiBr₂] (DME = 1,2‐dimethoxyethane) afforded the square‐planar palladium(II) complexes [(DMIQCI)PdCl₂] ( 7 ) and [(DMIQCD)PdCl₂] ( 8 ) or the tetrahedral nickel(II) complexes [(DMIQCI)NiBr₂] ( 9 ) and [(DMIQCD)NiBr₂] ( 10 ), respectively. The X‐ray crystal structures of 4 , 7 , 9· THF, and 10 are reported.     

[μ‐(Me3SiCH2Sb)5–Sb1,Sb3–{W(CO)5}2] und [{(Me3Si)2CHSb}3Fe(CO)4] – zwei cyclische Komplexe mit Antimon‐Liganden

Syntheses and Crystal Structures of [μ‐(Me₃SiCH₂Sb)₅–Sb¹,Sb³–{W(CO)₅}₂] and [{(Me₃Si)₂CHSb}₃Fe(CO)₄] – Two Cyclic Complexes with Antimony Ligands cyclo‐(Me₃SiCH₂Sb)₅ reacts with [(THF)W(CO)₅] (THF = tetrahydrofuran) to form cyclo‐[μ‐(Me₃SiCH₂Sb)₅–Sb¹,Sb³–{W(CO)₅}₂] ( 1 ). The heterocycle cyclo‐ [{(Me₃Si)₂CHSb}₃Fe(CO)₄] ( 2 ) is formed by an insertion reaction of cyclo‐[(Me₃Si)₂CHSb]₃ and [Fe₂(CO)₉]. The crystal structures of 1 and 2 are reported.     

[{(CH3)3Si}3C–Li–C{Si(CH3)3}3][Li · 3(OC4H8)] und {(CH3)3Si}3C–Li · O=C(Si(CH3)3)2, zwei neue Addukte des Lithium‐trisylmethanids

[{(CH₃)₃Si}₃C–Li–C{Si(CH₃)₃}₃][Li · 3(OC₄H₈)] and {(CH₃)₃Si}₃C–Li · O=C(Si(CH₃)₃)₂, two New Adducts of Lithium Trisylmethanide Sublimation of (Tsi–Li) · 2 THF (Tsi = –C(Si(CH₃)₃)₃) at 180 °C and 10^–4 hPa gives (Tsi–Li) · 1.5 THF in very low yield. The X‐ray structure determination shows an almost linear [Tsi–Li–Tsi]^– anion connected by short agostic Li…C contacts with the threefold THF‐coordinated Li‐cation. Base‐free Tsi–Li, solved in toluene is decomposed by oxygen, forming the strawberry‐colored ketone O=C(SiMe₃)₂, which forms an 1 : 1 adduct with undecomposed Tsi–Li. The X‐ray structure elucidation of this compound is also discussed.     

Synthesis,structure, and catalytic activity of rare-earth metal amides with a neutral pyrrolyl-functionalized indolyl ligand

<正>1 Representation of complexes and selected bond distances and bond angles Figure S1 Structure of complex 4. Hydrogen atoms were omitted for clarity, ellipsoids set at the 30% probability level. Selected bond distances() and angles(°): Er(1)–Cl(1) 2.6180(18), Er(1)–N(1) 2.301(6), Er(1)–N(4) 2.232(6), Er(1)–N(5) 2.229(6), N(1)–Er(1)–Cl(1) 87.41(14), N(4)–Er(1)–Cl(1) 101.16(14), N(5)–Er(1)–Cl(1) 118.60(16), N(4)–Er(1)–N(1) 114.1(2), N(5)–Er(1)–N(1) 108.7(2), N(5)–Er(1)–N(4) 121.9(2).Figure S2 Structure of complex 5. Hydrogen atoms were omitted for clarity, ellipsoids set at the 30% probability level. Selected bond distances(o) and angles(°): Y(1)–Cl(1) 2.6212(12), Y(1)–N(1) 2.280(3), Y(1)–N(4) 2.214(3), Y(1)–N(5) 2.228(3), N(1)–Y(1)–Cl(1) 87.67(8), N(4)–Y(1)–Cl(1) 121.32(8), N(5)–Y(1)–Cl(1) 102.88(8), N(4)–Y(1)–N(1) 107.75(11), N(5)–Y(1)–N(1) 111.64(11), N(4)–Y(1)–N(5) 120.78(10).     

Experimental Charge Density Studies of Cyclotetrasilazane and Metal Complexes Containing the Di‐ and Tetraanion

The homologous series of parent octamethylcyclotetrasilazane (c‐NH‐SiMe₂‐)₄, ( 1 ), the lithium complex [(THF)₂Li₂(c‐N‐SiMe₂‐NH‐SiMe₂‐)₂]₂, ( 2 ), containing the cyclic dianion, and [(THF)₂LiAl(c‐N‐SiMe₂‐)₄]₂, ( 3 ), accommodating the unprecedented tetraanion [Me₂SiN]^4‐ was synthesized to investigate the nature of the covalent Si‐N single bond in the presence of various metals. These model compounds show a wide diversity of Si‐N(H), Si‐N(M), Si‐N(H, M) and M‐N bonds and serve as bench‐mark systems to study polar bonds by high‐resolution low‐temperature X‐ray structure analysis. Experimental charge density studies reveal highly polar Si‐N bonds with remarkable ionic contribution, even in the non‐metallated starting material 1 . The Li‐N and Li‐O bonds have to be classified as almost purely ionic bonds with topological properties not far from those determined for NaCl.     

Synthese und Struktur der Komplexe [(n‐Bu)4N]2[{(THF)Cl4Re≡N}2PdCl2], [Ph4P]2[(THF)Cl4Re≡N‐PdCl(μ‐Cl)]2 und [(n‐Bu)4N]2[Pd3Cl8]

Synthesis and Crystal Structure of the Complexes [(n‐Bu)₄N]₂[{(THF)Cl₄Re≡N}₂PdCl₂], [Ph₄P]₂[(THF)Cl₄Re≡N‐PdCl(μ‐Cl)]₂ and [(n‐Bu)₄N]₂[Pd₃Cl₈] The threenuclear complex [(n‐Bu)₄N]₂[{(THF)Cl₄Re≡N}₂ PdCl₂] ( 1 ) is obtained in THF by the reaction of PdCl₂(NCC₆H₅)₂ with [(n‐Bu)₄N][ReNCl₄] in the molar ration 1:2. It forms orange crystals with the composition 1· THF crystallizing in the monoclinic space group C2/c with a = 2973.3(2); b = 1486.63(7); c = 1662.67(8)pm; β = 120.036(5)° and Z = 4. If the reaction is carried out with PdCl₂ instead of PdCl₂(NCC₆H₅)₂, orange crystals of hitherto unknown [(n‐Bu)₄N]₂[Pd₃Cl₈] ( 3 ) are obtained besides some crystals of 1· THF. 3 crystallizes with the space group P1¯ and a = 1141.50(8), b = 1401.2(1), c = 1665.9(1)pm, α = 67.529(8)°, β = 81.960(9)°, γ = 66.813(8)° and Z = 2. In the centrosymmetric complex anion [{(THF)Cl₄Re≡N}₂PdCl₂]^2— a linear PdCl₂ moiety is connected in trans arrangement with two complex fragments [(THF)Cl₄Re≡N]^— via asymmetric nitrido bridges Re≡N‐Pd. For Pd(II) thereby results a square‐planar coordination PdCl₂N₂. The linear nitrido bridges are characterized by distances Re‐N = 163.8(7)pm and Pd‐N = 194.1(7)pm. The crystal structure of 3 contains two symmetry independent, planar complexes [Pd₃Cl₈]^2— with the symmetry 1¯, in which the Pd atoms are connected by slightly asymmetric chloro bridges. By the reaction of equimolar amounts of [Ph₄P][ReNCl₄] and PdCl₂(NCC₆H₅)₂ in THF brown crystals of the heterometallic complex, [Ph₄P]₂[(THF)Cl₄Re≡N‐PdCl(μ‐Cl)]₂ ( 2 ) result. 2 crystallizes in the monoclinic space group P2₁/n with a = 979.55(9); b = 2221.5(1); c = 1523.1(2)pm; β = 100.33(1)° and Z = 2. In the central unit ClPd(μ‐Cl)₂PdCl of the centrosymmetric anionic complex [(THF)Cl₄Re≡N‐PdCl(μ‐Cl)]₂^2— the coordination of the Pd atoms is completed by two nitrido bridges Re≡N‐Pd to nitrido complex fragments [(THF)Cl₄Re≡N]^— forming a square‐planar arrangement for Pd(II). The distances in the linear nitrido bridges are Re‐N = 163.8(9)pm and Pd‐N = 191.5(9)pm.     

Deprotonation of a Seemingly Hydridic Diborane(6) To Build a B−B Bond

Deprotonation of the doubly arylene‐bridged diborane(6) derivative 1 H₂ with (Me₃Si)₃CLi or (Me₃Si)₂NK gives the B−B σ‐bonded species M[ 1 H] in essentially quantitative yields (THF, room temperature; M=Li, K, arylene=4,4′‐di‐tert‐butyl‐2,2′‐biphenylylene). With nBuLi as the base, the yield of Li[ 1 H] drops to 20 % and the 1,1‐bis(9‐borafluorenyl)butane Li[ 2 H] is formed as a side product (30 %). In addition to the 1,1‐butanediyl fragment, the two boron atoms of Li[ 2 H] are linked by a μ‐H bridge. In the closely related molecule Li[ 3 H], the corresponding μ‐H atom can be abstracted with (Me₃Si)₃CLi to afford the B−B‐bonded conjugated base Li₂[ 3 ] (THF, 150 °C; 15 %). Li[ 1 H] and Li[ 2 H] were characterized by NMR spectroscopy and X‐ray crystallography.     

Synthesis and Structure of the Tetrameric [Cp*V(μ‐F)2]4 (Cp* = C5Me5); Preparation of the Imido Molybdenum Fluoride [(2,6‐i‐Pr2C6H3N)2MoF2] · THF and the Structural Investigation of [(2,6‐i‐Pr2C6H3N)6Mo4(μ3‐F)2Me2(μ‐O)4]

Treating [Cp*V(μ‐Cl)₂]₃ (Cp* = C₅Me₅) and [(2,6‐i‐Pr₂C₆H₃N)₂MoMe₂], respectively, with Me₃SnF afforded the title compounds [Cp*V(μ‐F)₂]₄ ( 1 ) and [(2,6‐i‐Pr₂C₆H₃N)₂MoF₂] · THF ( 2 ). 1 has a tetrameric structure, in which four V atoms can be regarded as being arranged at the vertices of a distorted tetrahedron, with four long edges bridged by one F atom and each of the other two short edges bridged by two F atoms with a mean V–F bond length of 2.00 Å. A hydrolyzed product of 2 , [(2,6‐i‐Pr₂C₆H₃N)₆Mo₄(μ₃‐F)₂Me₂(μ‐O)₄] ( 3 ) was characterized by elemental analyses and X‐ray single crystal study. The X‐ray diffraction analysis reveals that 3 has a unique tetranuclear structure, containing two five and two six coordinated Mo atoms connecting each other by four μ‐O and two μ₃‐F atoms. The geometries around the two Mo atoms can be described having distorted trigonal bipyramidal and distorted octahedral coordination spheres, respectively. The Mo–(μ‐O) bond lengths are 1.813 Å (average) for five coordinated Mo atoms and 2.030 Å (average) for those of six coordinated, respectively, indicating an additional π bonding between five coordinated Mo atoms and the μ‐O atoms. The Mo–(μ₃‐F) distances range from 2.291 to 2.352 Å.     

Syntheses and Characterization of Organotin(IV) Complexes Derived from 2‐Mercapto‐1,3,4‐thiadiazole

Four organotin complexes of the types [(Ph₃Sn)(C₂HN₂S₂)] ( 1 ), [(CH₃)₃Sn(C₂HN₂S₂)]_n ( 2 ), [(Bu₂Sn)(C₂HN₂S₂)₂] ( 3 ), and [(Me₂Sn)₄(C₂HN₂S₂)₂(µ ₃‐O)₂(C₂H₅O)₂] ( 4 ) have been obtained by 2‐mercapto‐1,3,4‐thiadiazole and triorganotin chloride or diorganotin dichloride. All the complexes were characterized by elemental analysis, IR and NMR spectroscopy, and X‐ray diffraction analyses, which revealed that complexes 1 and 3 are mononuclear structures, complex 1 can further form a one‐dimensional (1D) helical chain, and complex 3 can further form a 22‐membered macrocycle through the intermolecular C–H·N hydrogen bond; complex 2 is a 1D infinite chain linked by intermolecular N→Sn and S→Sn bonding interactions; complex 4 is a typical ladder structure. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 00:1–8, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21046     

Synthese und Strukturen neuer Ringverbindungen des Bismuts mit Tris(trimethylsilyl)silyl und ‐stannylresten – [(Me3Si)3Si]4Bi4 und [(Me3Si)3Sn]6Bi8

Synthesis and Structures of Novel Ring Compounds of Bismuth with Tris(trimethylsilyl)silyl and ‐stannyl Substituents – [(Me₃Si)₃Si]₄Bi₄ and [(Me₃Si)₃Sn]₆Bi₈ A bicyclo[3.3.0]octane‐like core consisting of eight bismuth atoms is found in the novel octabismuthane Bi₈[Sn(SiMe₃)₃]₆. It is prepared like Bi₄[Si(SiMe₃)₃]₄ by reduction of BiBr₃ with Li(thf)₃E(SiMe₃)₃ (E = Si, Sn) together with (Me₃Si)₆E₂. Both bismuth ring compounds have been characterized by single crystal X‐ray crystallography.     

Neue Synthesen von Me2SbX (X = Cl,I) und Kristallstrukturen von Me2SbI und [(Me3Si)2CH]2SbCl

Novel Syntheses of Me₂SbX (X = Cl, I) and Crystal Structures of Me₂SbI and [(Me₃Si)₂CH]₂SbCl The crystal structures of Me₂SbI (Me = CH₃) and [(Me₃Si)₂CH]₂SbCl have been determined by X‐ray methods. Both molecules are pyramidal. The Me₂SbI molecules are associated to chains through short intermolecular Sb…I distances (366,7(1) pm) with linear I–Sb…I units (171,87(4)°) and bent Sb–I…Sb bridges (116,83(3)°).     

Synthesis of ferrocene‐containing N‐aryloxo β‐ketoiminate lanthanide complexes and polymerization of ε‐caprolactone

The synthesis, characterization and ε‐caprolactone polymerization behavior of lanthanide amido complexes stabilized by ferrocene‐containing N‐aryloxo functionalized β‐ketoiminate ligand FcCOCH₂C(Me)N(2‐HO‐5‐Bu^t‐C₆H₃) (LH₂, Fc = ferrocenyl) are described. The lanthanide amido complexes [LLnN(SiMe₃)₂(THF)]₂ [Ln = Nd ( 1 ), Sm ( 2 ), Yb ( 3 ), Y ( 4 )] were synthesized in good yields by the amine elimination reactions of LH₂ with Ln[N(SiMe₃)₂]₃(µ‐Cl)Li(THF)₃ in a 1:1 molar ratio in THF. These complexes were characterized by IR spectroscopy and elemental analysis, and ¹H NMR spectroscopy was added for the analysis of complex 4 . The definitive molecular structures of complexes 1 and 3 were determined by X‐ray diffraction studies. Complexes 1 – 4 can initiate the ring‐opening polymerization of ε‐caprolactone with moderate activity. Copyright © 2011 John Wiley & Sons, Ltd.