DNA-mediated coordinative assembly of upconversion hetero-nanostructures for targeted dual-modality imaging of cancer cells

We reported a simple and universal strategy for DNA-mediated assembly of CdTe quantum dots (QDs) and lanthanide-doped upconversion nanoparticles (UCNPs). Such DNA-QD/UCNPs heterostructures not only maintains both fluorescent properties of QDs and upconversion luminescence behaviors of UCNPs, but also offers a polyvalent DNA surface, allowing for targeted dual-modality imaging of cancer cells using an aptamer     

优化稀土上转换纳米材料发光的方法

稀土上转换纳米材料(Upconversion Nanoparticles,UCNPs)可将近红外光转换为可见光,其发光性能优异、化学性质稳定、激发光能有效避免自荧光,因此在生物医学领域应用广泛。但UCNPs的低发光效率限制了其进一步发展。本文综述了近年来研究较多的几种优化稀土上转换纳米材料发光的方法,主要包括调整基质材料和掺杂离子、过渡金属离子与镧系离子共掺杂、引入协同敏化剂减少热效应、有机染料与UCNPs协同作用以及金属表面等离子体共振增强法等。文中分别论述了上述方法的最新研究进展,并总结了这些方法目前存在的问题,指出上转换发光领域的研发重点:一是着重分析各种优化发光方法的作用机理,提出更加完备清晰的理论体系;二是探索更容易被生物体降解的UCNPs,使其副作用降到最低。     

Multicolor output and shape controlled synthesis of lanthanide-ion doped fluorides upconversion nanoparticles

A general and facile approach for tailoring the multicolor output and shapes of lanthanide-ion doped fluoride upconversion nanoparticles (UCNPs) within a given composition is presented. By adjusting the temperature and time in the thermolysis procedure, the color output and shapes of NaYF(4):20%Yb, 2%Er UCNPs can be readily manipulated. The nanoparticles were characterized through the use of transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and upconversion luminescence spectroscopy. It is shown that the relative intensities of green emissions gradually increased with the rise of temperature and prolongation of growth time under excitation of 980 nm, which resulted in multicolor output of NaYF(4):20%Yb, 2%Er UCNPs. Simultaneously, the shapes for UCNPs can also be controlled. TEM images, estimated micro-stress by Williamson-Hall methodology and a series of control experiments and analyses reveal that crystallinity is mainly responsible for the multicolor output of UCNPs. Based on the above method, the tailoring of color output is also successfully realized in Ho(3+) and Tm(3+) ions. It is expected that this method may be used to tune the physical properties of other nanoparticles, and these multicolored UCNPs are promising for applications in multiplexed bioimaging, biodetection, display, other optical technologies, etc.     

上转换纳米粒子的Y(OH)CO3壳层包覆及壳层转化

Along with the promising applications of lanthanide doped upconversion nanomaterials in diverse fields such as biology, anti-counterfeiting, and lasering, the demand for multifunctional upconversion nanomaterials is increasing. One effective means of obtaining these nanomaterials is to fabricate upconversion nanomaterial-based heterostructures, which may provide superior properties as compared to the sum of the parts. However, obtaining heterostructured upconversion nanomaterials remains challenging mainly because of the crystal lattice mismatch between upconversion nanomaterials and other materials. Typically used strategies for synthesizing upconversion nanomaterial-based heterostructures are applicable only to limited types of materials. Alternatively, transformation of the intermediate layer is a promising strategy used to obtain these heterostructures. Nevertheless, this method remains in its infancy and, to date, only a few intermediate layers have been developed. New types of intermediate layers are therefore highly desirable. In this study, we show that amorphous Y(OH)CO₃ can be a promising candidate as an intermediate layer for fabricating upconversion nanoparticle-based heterostructures. As a proof-of-concept experiment, ligand-free NaGdF₄:Yb/Tm upconversion nanoparticles were first prepared as core nanoparticles. The Y(OH)CO₃ shell was then directly coated on the NaGdF₄:Yb/Tm upconversion nanoparticles in an aqueous solution using urea and Y(NO₃)₃, by a homogeneous precipitation approach. The thickness of the resulting Y(OH)CO₃ shell could be tuned by adjusting the amounts of either urea or Y(NO₃)₃. The as-coated Y(OH)CO₃ shell could be easily converted to YOF by heating at 300 ℃, yielding NaGdF₄:Yb/Tm@YOF core-shell heterostructured nanoparticles. In addition, we found that the NaGdF₄ core could be transformed to lanthanide oxide fluoride if the NaGdF₄:Yb/Tm@Y(OH)CO₃ core-shell nanoparticles were heated at 350 ℃. We also observed that treating the NaGdF₄:Yb/Tm@Y(OH)CO₃ core-shell nanoparticles at even higher temperatures (e.g., 400 ℃) produced aggregations of nanoparticles without regular morphologies. The transformation of the shell can be attributed to the decomposition of Y(OH)CO₃ and reactions between the Y(OH)CO₃ shell and NaGdF₄ core. Meanwhile, the transformation of the NaGdF₄ core at relatively high temperatures could be primarily due to the reactions between Y(OH)CO₃ and NaGdF₄. Notably, in this study, the core-shell structured nanoparticles, with either a Y(OH)CO₃ or YOF shell, maintained the photon upconversion properties of NaGdF₄:Yb/Tm upconversion nanoparticles. In addition, the method used here could be extended to the coating of other shells such as Tb(OH)CO₃ and Yb(OH)CO₃ on upconversion nanoparticles. Moreover, the NaGdF₄:Yb/Tm@Y(OH)CO₃ core-shell nanoparticles could be transformed to other nanoparticles with novel structures such as yolk-shell nanoparticles. These results can pave the way for preparing upconversion nanoparticle-based heterostructures and multifunctional composites, thus promoting new applications of upconversion nanoparticles.     

Recent Development on Controlled Synthesis of Metal Sulfides Hollow Nanostructures via Hard Template Engaged Strategy: A Mini‐Review

In this mini‐review, we highlighted the recent progresses in the controlled synthesis of metal sulfides hollow nanostructures via hard template technique. After a brief introduction about the formation mechanism of the inorganic hollow nanostructures via hard template technique, the discussions primarily focused on the emerging development of metal sulfides hollow nanostructures. Various synthetic strategies were summarized concerning the use of the hard template engaged strategies to fabricate various metal sulfides hollow nanostructures, such as hydrothermal method, solvothermal method, ion‐exchange, sulfidation or calcination etc. Finally, the perspectives and summaries have been presented to demonstrate that a facile synthetic technique would be widely used to fabricate metal sulfides hollow nanostructures with multi‐shells and components.     

内嵌硫化镉与上转换纳米颗粒的二氧化钛复合纳米管用于近红外光驱动光催化

由于近红外光在太阳光谱中占44%,因此,近红外光驱动的光催化剂的研制具有十分重要的意义.上转换发光材料可将低能量的近红外光子转换为高能光子,这种高能光子可以通过构建荧光共振转移系统将能量转移并活化量子效率较高的半导体材料,对于太阳能的转化利用具有潜在的应用前景.在本文中,通过胶体化学的过程在电纺丝制备的内嵌CdS纳米颗粒以及上转换荧光纳米颗粒(UCNPs)的二氧化硅复合纳米纤维表面外延生长一层二氧化钛层,通过高温煅烧得到二氧化钛复合纳米管.我们通过二氧化硅结构将CdS纳米颗粒与上转换荧光纳米颗粒紧紧束缚在一起,实现较高的荧光共振能量转移.而且,选择β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)作为纳米能量转换器,替代以前研究工作中使用的β-NaYF4:Yb(30%),Tm(0.5%)或者β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4纳米颗粒,来进一步提高近红外光的转换效率.通过透射电子显微镜照片很清楚的观察到制备的TiO2复合纳米管内部内嵌有大量的CdS与上转换纳米颗粒.通过X-射线衍射以及X-射线光电子能谱能仪器对产物的物相以及表面的化学组成进行了细致的表征.结果显示,通过本实验方法已经成功获得了TiO2复合纳米管.用稳态与瞬态荧光仪研究了最终样品的荧光性质.研究结果揭示,与上转换纳米颗粒以及二氧化硅复合纳米纤维相比,复合二氧化钛纳米管可以将上转换荧光纳米颗粒的(UV-Vis)部分荧光完全淬灭了.特别是,铒离子的荧光(650 nm)也被有效淬灭转移,说明本研究采用β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米能量转换器,可以提高近红外光的转换效率,紫外-可见吸收光谱证实,这种二氧化钛纳米管在紫外-可见光区中的吸收光谱与β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米颗粒的荧光光谱具有较大的重叠,使得上转换荧光纳米颗粒与CdS以及二氧化钛组分之间的荧光共振转移的效率大大提高,进而会显著提高光催化的效果.以罗丹明染料作为污染物为模型,我们研究了罗丹明染料在氙灯下或者近红外光光照下的光催化分解实验.研究结果表明,90%的罗丹明染料分子在20 min内就被降解掉,效率高于其它的近红外光催化剂.上转换荧光纳米颗粒的能量转换效率可以得到大幅度提高,本研究工作中制备的光催化剂利用太阳能的效率将会得到极大提高,在未来为能源危机以及环境保护提供一种可供选择的方法与技术.     

A Long-term and Stable Surface Modification Method for Lanthanide Doped Upconversion Nanoparticles by Oxidized Alginate

Lanthanide doped upconversion luminescent nanoparticles (UCNPs) have drawn widely attention in biomedical research. The generally synthesized oleate capped UCNPs have no aqueous dispersibility so that surface modification is required to be water dispersible. Herein, we developed an easy-going but effective approach to prepare hydrophilic UCNPs based on oxidized alginate molecule (OAlg). After surface modification treatment, the OAlg modified UCNPs (UCNPs-OAlg) shows excellent dispersibility and longer stability in aqueous solution even after 180 days. After incubation with UCNPs-OAlg, the upconversion luminescent images of living Hela cells were clearly obtained. It indicated that oxidized alginate modified UCNPs can be candidate for excellent imaging probes in future.     

Upconversion nanomaterials: a platform for biosensing,theranostic and photoregulation

Upconversion nanoparticles (UCNPs) are a kind of unique optical material, that are able to emit ultraviolet (UV), visible or near infrared (NIR) luminescence upon NIR light excitation. Because of their excellent physic-chemical characters including enormous anti-Stokes spectral shift, high resistance to photobleaching, fairly long luminescent lifetime, excellent chemical stability, sharp emission band, and deep tissue penetration depth, UCNPs have become a useful tool in bioimaging, biosensing, as well as cancer therapy. In particularly, the emissions light from UCNPs can activate photosensitive molecules, which has the potential to realize the regulation of cell behaviors, including cell growth, adhesion and differentiation. This review consequently introduces the principle and achievements of UCNPs in biomedical field to the general readers for promoting both fundamental research and bio-applications of UCNPs. After the brief introduction of the physical mechanism of upconversion luminescence (UCL), we introduce several strategies to enhance the emissions brightness in detail, then discuss various biomedical applications of UCNPs.     

Boosting the Efficiency of Dye-Sensitized Solar Cells by a Multifunctional Composite Photoanode to 14.13 %

We report a new strategy to fabricate a multifunctional composite photoanode containing TiO₂ hollow spheres (TiO₂-HSs), Au nanoparticles (AuNPs) and novel NaYF₄ : Yb,Er@NaLuF₄ : Eu@SiO₂ upconversion nanoparticles (UCNPs). The AuNPs are grown on the photoanode film including TiO₂-HSs and UCNPs by a simple in situ plasmonic treatment. As a result, an impressive power conversion efficiency of 14.13 % is obtained, which is a record for N719 dye-based dye-sensitized solar cells, demonstrating great potential for the solar cells toward commercialization. This obvious enhancement is ascribed to a collaborative mechanism of the TiO₂-HSs exhibiting excellent light-scattering ability, of the UCNPs converting near-infrared photons into visible photons and of the AuNPs presenting outstanding surface plasmon resonance effect. Notably, a steady-state experiment further reveals that the champion cell exhibits 95.33 % retainment in efficiency even after 180 h of measurements, showing good device stability.     

Effects of Surface Modification of Upconversion Nanoparticles on Cellular Uptake and Cytotoxicity

Lanthanide-doped upconversion nanoparticles(UCNPs) are great promising to apply to biomedical imaging and therapy. We prepared NaYF₄:Yb³⁺,Er³⁺ nanoparticles with different surface ligands, i.e., without any ligands(bare), coordinated with 2-aminoethyl dihydrogen phosphate(AEP), polyacrylic acid(PAA) or polyallylamine (PAAm), via a simple two-step ligand exchange of oleic acid capped NaYF₄:Yb³⁺,Er³⁺ nanoparticles. Although the surface modification retained the crystal structure and transimission electron microscope(TEM) size distribution of the nanoparticles, and good dispersibility in aqueous solution and did not significantly change the upconversion luminescence, distinct differences were observed in the surface charge and hydrodynamic diameter. The cellular uptake and cytotoxicity of the nanoparticles were studied on two different cell lines, breast cancer MCF-7 and fibroblast 3T3. Confocal microscopy images demonstrate that PAAm-coordinated UCNPs can enhance the cellular uptake and endocytosis, whereas AEP- and PAA-coordinated UCNPs show a very low level of nonspecific adsorption. Biocompatibility studies based on 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide(MTT) assay, however, indicate that PAAm-coordinated UCNPs are more toxic than the other two, and thus need further modifiaction(like PEG coordinating) to improve their biocompatibility. These results are important to the knowledge base required for the biomedical application of the UCNPs.     

Upconversion nanoparticle-based fluorescence resonance energy transfer assay for Cr(III) ions in urine

A novel assay of chromium(III) ion based on upconversion fluorescence resonance energy transfer was designed and established. Lysine-capped NaYF₄:Yb/Er upconversion nanoparticles (UCNPs) and dimercaptosuccinic acid-capped gold nanoparticles (AuNPs) were used as the energy donor and acceptor, respectively. They were bound together via electrostatic interaction, resulting in the quenching of the fluorescence of UCNPs by AuNPs. Chromium(III) ions can specifically and strongly interact with dimercaptosuccinic acid that was modified on the surface of AuNPs, leading to the separation of AuNPs from UCNPs and the recovery of fluorescence of UCNPs. The fluorescence recovery of UCNPs showed a good linear response to Cr³⁺ concentration in the range of 2–500 nM with a detection limit of 0.8 nM. This method was further applied to determine the levels of Cr³⁺ in urine. Compared with other fluorescence methods, current method displayed very high sensitivity and signal-to-noise ratio because of the excitation of near-infrared that can eliminate autofluorescence, providing a promising examination of biological samples for the diagnostic purposes.     

掺杂比例和光敏剂对上转换纳米材料性能的影响

以NaYF_4材料为基质的上转换纳米颗粒(UCNPs)是最早报道的、应用范围最广的上转换材料之一。掺杂了稀土离子的颗粒不但可以在不同激发条件下发射出不同波长和强度的荧光,而且可以与多种光敏分子搭配使用,通过荧光共振能量转移产生单线态氧,实现生物医学成像或诊疗方面的应用。但是其形貌和荧光性能均受制备方法和工艺条件的影响较大。本文通过水热法合成了两类掺杂不同稀土离子的十种NaYF_4 UCNPs,在保持掺杂离子的终浓度不变的条件下,探究离子类型与比例对纳米材料的结构和上转换发光性能的影响。在此基础上,探索了多种卟啉类光敏剂分子与NaYF_4 UCNPs发生能量转换及单线态氧的产生能力。本工作可为基于NaYF_4材料的上转换颗粒的规模化制备和工艺升级提供数据支撑和理论参考。     

Rational design and biomedical applications of DNA-functionalized upconversion nanoparticles

In this review, we mainly introduced recent progress of DNA-functionalized upconversion materials, providing an overview of the design and applications in biosensing, bioimaging and disease therapy. The challenges and future perspectives are also discussed, aiming to promote their applications in materials science and biomedicine.     

Enhanced red emission from GdF3:Yb3+,Er3+ upconversion nanocrystals by Li+ doping and their application for bioimaging

Under 980?nm near-infrared (NIR) excitation, upconversion luminescent (UCL) emission of GdF(3):Yb,Er upconversion nanoparticles (UCNPs) synthesized by a simple and green hydrothermal process can be tuned from yellow to red by varying the concentration of dopant Li(+) ions. A possible mechanism for enhanced red upconverted radiation is proposed. A layer of silica was coated onto the surface of GdF(3):Yb,Er,Li UCNPs to improve their biocompatibility. The silica-coated GdF(3):Yb,Er,Li UCNPs show great advantages in cell labeling and in vivo optical imaging. Moreover, GdF(3) UCNPs also exhibited a positive contrast effect in T(1)-weighted magnetic resonance imaging (MRI). These results suggest that the GdF(3) UCNPs could act as dual-modality biolabels for optical imaging and MRI.     

Unveiling the origin of performance enhancement of photovoltaic devices by upconversion nanoparticles

To better utilize the infrared(IR)region in sunlight for photovoltaic devices(PVs),upconversion nanoparticles(UCNPs)have been proposed to improve power conversion efficiency(PCE).However,researchers recently have found that the upconversion(UC)effect is negligible in PVs performance improvement for their ultra-low UC photoluminescence quantum yields of UCNPs solid film,while the real mechanism of UCNPs in PVs has not been clearly studied.Herein,based on the material inorganic perovskitesγ-CsPbI₃,NaYF₄:20%Yb³⁺,2%Er³⁺UCNPs were integrated into different transport layer to optimize device performance.Compared with reference device,the short-circuit current density and PCE of optimized device reached 20.87 mA/cm²(20.39 mA/cm²)and 18.34%(17.72%),respectively,without sacrificing open-circuit voltage and filling factor.Further experimental characterizations verified that the improved performance was attributable to enhanced visible light absorption instead of IR.To theoretically explain the statement,the light field distribution in device was simulated and the absorption in different layers was calculated.The results revealed that the introduction of UCNPs with different refractive index from other layers caused light field disturbance,and improved visible light captured by γ-CsPbI₃.Importantly,through experiments and theoretical calculation,the research deeply explored the potential mechanism of UCNPs in optimizing PVs performance.     

Significant Enhancement of the Upconversion Emission in Highly Er3+-Doped Nanoparticles at Cryogenic Temperatures

Relatively low efficiency is the bottleneck for the application of lanthanide-doped upconversion nanoparticles (UCNPs). The high-level doping strategy realized in recent years has not improved the efficiency as much as expected. It is argued that cross relaxation (CR) is not detrimental to upconversion. Here we combine theoretical simulation and spectroscopy to elucidate the role of CR in upconversion process of Er³⁺ highly doped (HD) UCNPs. It is found that if CR is purposively suppressed, upconversion efficiency can be significantly improved. Specifically, we demonstrate experimentally that inhibition of CR by introducing cryogenic environment (40 K) enhances upconversion emission by more than two orders of magnitude. This work not only elucidates the nature of CR and its non-negligible adverse effects, but also provides a new perspective for improving upconversion efficiency. The result can be directly applied to cryogenic imaging and wide range temperature sensing.     

Existing and emerging strategies for the synthesis of nanoscale heterostructures

Development of new multifunctional nanostructures relies on the ability to make new materials at the nanoscale with control over size, shape and composition. While this control is extremely important to tune several properties, an alternative strategy is to create active interfaces between two or more nanostructures to form nanoscale heterostructures. In these heterostructures, the interfaces play a key role in stabilizing and enhancing the efficiency of the individual components for various applications. In this article, we discuss synthesis methods of different types of nanoscale heterostructures and the role of interfaces in various applications. We present the current state-of-the-art in designing heterostructures and possible upcoming synthetic strategies with their advantages and disadvantages. We present how such heterostructures are highly efficient for catalytic, photovoltaic and nanoelectronic applications drawing several examples from our own studies and from the literature.     

核酸适配体功能化的稀土上转换纳米材料在生物检测中的应用

稀土上转换纳米材料可以吸收近红外光并发射出可见光或紫外光,在生物传感领域得到了广泛研究。核酸适配体能高特异性和高亲和性地与靶标物结合,被广泛应用于生物传感、疾病诊断等领域。将稀土上转换纳米材料与核酸适配体结合构建的检测体系,可实现对目标物灵敏、高选择性的检测。本文介绍了近几年核酸适配体功能化的稀土上转换纳米材料在生物小分子、蛋白质、核酸、病原微生物、细胞等方面的应用,并展望了其在分析检测领域的发展前景。     

Luminescent Ink Based on Upconversion of NaYF4:Er,Yb@MA Nanoparticles: Environmental Friendly Synthesis and Structural and Spectroscopic Assessment

NaYF₄:Er,Yb upconversion luminescent nanoparticles (UCNPs) were prepared by hydrothermal methods at 180 °C for 24 h. The X-ray diffraction (XRD) and TEM (transmission electron microscopy) images show that the resulting 60 nm UCNPs possess a hexagonal structure. In this work, maleic anhydride (MA) was grafted on the surface of UCNPs to induce hydrophilic properties. The photoluminescence spectra (PL) show upconversion emissions centered around 545 nm and 660 nm under excitation at 980 nm. The luminescent inks, including UCNPs@MA, polyvinyl alcohol (PVA), deionized water (DI), and ethylene glycol (EG), exhibit suitable properties for screen printing, such as high stability, emission intensity, and tunable dynamic viscosity. The printed patterns with a height of 5 mm and a width of 1.5 mm were clearly observed under the irradiation of a 980 nm laser. Our strategy provides a new route for the controlled synthesis of hydrophilic UCNPs, and shows that the UCNPs@MAs have great potential in applications of anti-counterfeiting packing.     

Sequence-Dependent DNA Functionalization of Upconversion Nanoparticles and Their Programmable Assemblies

DNA-modified lanthanide-doped upconversion nanoparticles (DNA-UCNPs) that combine the functions of DNA and the optical features of UCNPs have shown great promise in a wide range of fields. However, challenges remain in precisely tethering and orienting the DNA strands on the UCNP surface. Herein, we systematically investigate the sequence dependence of DNAs in their interactions with UCNPs, and reveal that poly-cytosine (poly-C) has high affinity for the UCNP surface. A general approach to synthesize monodispersed DNA-UCNP conjugates is developed using poly-C-containing diblock DNA strands. The poly-C segment of the DNA strand binds to the surfaces of UCNPs and the second segment is oriented perpendicularly on the UCNP surface, making the DNA-UCNPs highly stable and monodispersed in aqueous solution. The dense layer of DNA on the UCNP surface enables the programmable assembly of UCNPs with other DNA-functionalized nanoparticles or DNA origamis through hybridization, resulting in the formation of well-organized complex structures.