Deposition of copper‐doped iron sulfide (CuxFe1−xS) thin films using aerosol‐assisted chemical vapor deposition technique

Copper‐doped iron sulfide (Cu_xFe_1?xS, x = 0.010–0.180) thin films were deposited using a single‐source precursor, Cu(LH)₂Cl₂ (LH = monoacetylferrocene thiosemicarbazone), by aerosol‐assisted chemical vapor deposition technique. The Cu‐doped FeS thin films were deposited at different substrate temperatures, i.e. 250, 300, 350, 400 and 450 °C. The deposited thin films were characterized by X‐ray diffraction (XRD) patterns, Raman spectra, scanning electron microscopy, energy dispersive X‐ray analysis (EDX) and atomic force microscopy. XRD studies of Cu‐doped FeS thin films at all the temperatures revealed formation of single‐phase FeS structure. With increasing substrate temperature from 250 to 450 °C, there was change in morphology from wafer‐like to cylindrical plate‐like. EDX analysis showed that the doping percentage of copper increased as the substrate temperature increased from 250 to 450 °C. Raman data supports the doping of copper in FeS films. Copyright © 2010 John Wiley & Sons, Ltd.     

Functionalization and Dispersion of Hexagonal Boron Nitride (h‐BN) Nanosheets Treated with Inorganic Reagents

A mixture of bulk hexagonal boron nitride (h‐BN) with hydrazine, 30 % H₂O₂, HNO₃/H₂SO₄, or oleum was heated in an autoclave at 100 °C to produce functionalized h‐BN. The product formed stable colloid solutions in water (0.26–0.32 g L ^?1) and N,N‐dimethylformamide (0.34–0.52 g L ^?1) upon mild ultrasonication. The yield of “soluble” h‐BN reached about 70 wt %. The dispersions contained few‐layered h‐BN nanosheets with lateral dimensions in the order of several hundred nanometers. The functionalized dispersible h‐BN was characterized by IR spectroscopy, X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). It is shown that h‐BN preserves its hexagonal structure throughout the functionalization procedure. Its exfoliation into thin platelets upon contact with solvents is probably owing to the attachment of hydrophilic functionalities.     

Well Oriented ZnO Nanorods Array: Negative Resistance and Optical Switching

Well‐oriented ZnO nanorods (NRs) arrays were grown on Si, alumina, quartz, and FTO substrates through a ZnO seed layer followed by low temperature wet chemical process. The influence of sputtered ZnO seed layer thickness (100, 50, 32, and 16 nm), annealing temperature and CuO_x coverage on the characteristics of ZnO NRs were investigated in this study. The crystalline structural, chemical, morphological, optical, and electrical properties of ZnO NRs arrays were studied by X‐ray diffraction (XRD), field emission‐ scanning electron microscopy equipped by energy dispersive X‐ray spectroscopy (FE‐SEM/EDX), Raman scattering, UV/Vis ‐ near IR absorption spectroscopy and current‐voltage characteristic. XRD and Raman spectra measurement revealed that the synthesize ZnO displayed hexagonal wurtzite structure. The individual rod diameter, density, and orientation can be controlled by varying the seed layer thickness. The mean diameter and maximum length of ZnO NRs are around 55–66 nm and 282 nm, respectively. ZnO NRs/ ZnO thin film structure shows optical switching and negative differential resistance behavior as applicable to ON/OFF gate and memory devices.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Synthesis of Au/Al2O3 Nanocatalyst and its Application in the Reduction of p‐Nitrophenol

Gold (Au) nanoparticles supported on alumina (Al₂O₃) were prepared at several pH levels via the deposition‐precipitation (DP) method. The effects of pH at below and above the isoelectric point (IEP) of Al₂O₃ as well as the pH adjustment before and after the addition of the support into the gold chloride solution were investigated. The results revealed the formation of cationic, clusters and metallic Au on alumina. The catalytic activity of these species was tested in the reduction of p‐nitrophenol (p‐NP) using hydrazine as a reductant. The catalytic reaction was monitored spectrophotometerically and the highest rate constant (k‐) achieved based on pseudo first order kinetic model was 12.7 × 10^‐3 s^‐1. Structural and elemental characterizations of the supported gold nanoparticles were carried out using X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy‐dispersive X‐rays (EDX), atomic absorption spectrometry (AAS), and ultraviolet‐visible spectroscopy (UV‐Vis).     

4,5‐Imidazoledicarboxylic acid immobilized on Fe3O4 magnetic nanoparticles: Preparation,characterization, and application as a recyclable and efficient nanocatalyst in the sonochemical condensation reaction

A green synthesis of benzimidazole derivatives using recyclable magnetic 4,5‐imidazoledicarboxylic is described. The magnetic 4,5‐imidazoledicarboxylic (Fe₃O₄@ImDCA) nanocatalyst was characterized completely by infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD), and benzimidazoles were characterized by their melting points, FT‐IR, and ¹H NMR. The current approach provides a number of advantages in terms of high yields, low reaction times, the use of green media, and easy work‐up.     

Facile Chan‐Lam coupling using ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene

Ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene ([GrFemImi]NHC@Cu complex) has been synthesized by covalent grafting of ferrocenyl ionic liquid in the matrix of graphene followed by metallation with copper (I) iodide. The [GrFemImi]NHC@Cu complex has been characterized by fourier transform infrared (FT‐IR), fourier transform Raman (FT‐Raman), CP‐MAS ¹³C NMR spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), energy dispersive X‐ray (EDX) analysis, X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis and X‐ray diffractometer (XRD) analysis. This novel complex served as a robust heterogeneous catalyst for the synthesis of bioactive N‐aryl sulfonamides from variety of aryl boronic acids and sulfonyl azides in ethanol by Chan‐Lam coupling. Recyclability experiments were executed successfully for six consecutive runs.     

Nanotubes Made from Deeply Undercooled Cryolite/Alumina Melts

The rapid‐solidification processing (by a cooling rate of 10⁵–10⁶ K/s) was used for the preparation of deeply undercooled cryolite/alumina (Na₃AlF₆/Al₂O₃) melts. We found a mass of nanotubes on the surface of these undercooled melts. The nanotubes were preferentially located on the defect places of the surface with the following approximate dimensions: base≈100×100 nm, length≈1000 nm. The solidified samples with the nanotubes on the surface were analyzed by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), and infrared spectroscopy (IR).     

Development and Properties of Surfactant‐Free Water‐Dispersible Cu2ZnSnS4 Nanocrystals: A Material for Low‐Cost Photovoltaics

A simple, yet novel hydrothermal method has been developed to synthesize surfactant‐free Cu₂ZnSnS₄ nanocrystal ink in water. The environmentally friendly, 2–4 nm ultrafine particles are stable in water for several weeks. Detailed X‐ray diffraction (XRD) and high‐resolution transmission electron microscopy revealed the formation of single‐crystalline‐kesterite‐phase Cu₂ZnSnS₄. Elemental mapping by scanning electron microscopy/energy dispersive spectrometry corroborated the presence of all four elements in a stoichiometric ratio with minor sulfur deficiency. Finally, Raman spectroscopy ruled out the possible presence of impurities of ZnS, Cu₂SnS₃, SnS, SnS₂, Cu_2?xS, or Sn₂S₃, which often interfere with the XRD and optical spectra of Cu₂ZnSnS₄. X‐ray photoelectron spectroscopic studies of the as‐synthesized samples confirmed that the oxidation states of the four elements match those of the bulk sample. Optical absorption analyses of thin film and solution samples showed high absorption efficiency (>10⁴ cm^?1) across the visible and near‐infrared spectral regions and a band gap E_g of 1.75 eV for the as‐synthesized sample. A non‐ohmic asymmetric rectifying response was observed in the I–V measurement at room temperature. The nonlinearity was more pronounced for this p‐type semiconductor when the resistance was measured against temperature in the range 180–400 K, which was detected in the hot‐point probe measurement.     

Improving the Photocatalytic Activity of Modified Anatase TiO2 with Different Concentrations of Aluminum under Visible Light: Mechanistic Survey

Visible light‐driven Al‐doped TiO₂ with different aluminum contents (2, 5 and 10 mol%) were synthesized via a facile sol–gel method. Fourier transform infrared (FTIR), UV‐visible diffuse reflectance, energy dispersive X‐ray (EDX) spectroscopy as well as X‐ray diffraction (XRD), X‐ray fluorescence (XRF) and scanning electron microscopy (SEM) methods were used for the characterization of the obtained nanoparticles. The photocatalytic performance of the samples was evaluated by the degradation of rhodamine B (RhB) under visible light irradiation. The yield of the degradation RhB was estimated to be 71%, 89%, 65% and 56%, for the bare TiO₂, 2%, 5% and 10% Al‐doped TiO₂, respectively. It was found that 2 mol% of Al‐doped TiO₂ shows the best photocatalytic performance. In low concentration of dopant, separation of photogenerated electron–hole pairs promoted, and subsequently, the degradation efficiency increased. It was proposed that the degradation of RhB by 2 mol% Al‐doped TiO₂ photocatalyst follows both N‐deethylation and chromophore cleavage mechanisms, while the N‐deethylation still predominated over cleavage of dye chromophore structure. The key role of hydroxyl radicals in RhB degradation was verified by the effects of scavengers. In addition, the photocatalyst can be reused for three runs without any significant loss of its catalytic activity.     

Electrochemical Fabrication and Properties of Highly Ordered Fe‐Doped TiO2 Nanotubes

Highly‐ordered Fe‐doped TiO₂ nanotubes (TiO₂nts) were fabricated by anodization of co‐sputtered Ti–Fe thin films in a glycerol electrolyte containing NH₄F. The as‐sputtered Ti–Fe thin films correspond to a solid solution of Ti and Fe according to X‐ray diffraction. The Fe‐doped TiO₂nts were studied in terms of composition, morphology and structure. The characterization included scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, UV/Vis spectroscopy, X‐ray photoelectron spectroscopy and Mott–Schottky analysis. As a result of the Fe doping, an indirect bandgap of 3.0 eV was estimated using Tauc’s plot, and this substantial red‐shift extends its photoresponse to visible light. From the Mott–Schottky analysis, the flat‐band potential (E_fb) and the charge carrier concentration (N_D) were determined to be ?0.95 V vs Ag/AgCl and 5.0 ×10¹⁹ cm^?3 respectively for the Fe‐doped TiO₂nts, whilst for the undoped TiO₂nts, E_fb of ?0.85 V vs Ag/AgCl and N_D of 6.5×10¹⁹ cm^?3 were obtained.     

Spinel copper ferrite nanoparticles: Preparation,characterization and catalytic activity

The magnetic CuFe₂O₄ nanoparticles have been synthesized and characterized by various spectroscopic methods, including X‐ray diffraction (XRD), O K, Cu and Fe K ‐edge X‐ray absorption near edge structure (XANES), energy dispersive X‐ray analysis (EDX), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The azide‐alkyne cycloaddition by the reaction of various phenylacetylenes with a mixture of benzyl halides and NaN₃ and also three component (A³) coupling reaction of aldehyde, alkyne and amine catalyzed by CuFe₂O₄ nanoparticles under aerobic conditions led to the formation of the 1,4‐disubstituted‐1,2,3‐triazoles and propargylamines in excellent yields. The catalyst can be recovered by applying an external magnetic field for the subsequent cycloaddition reactions and reused without any tangible loss in catalytic efficiency.     

CuI/Fe3O4 NPs@Biimidazole IL‐KCC‐1 as a leach proof nanocatalyst for the synthesis of imidazo[1,2‐a]pyridines in aqueous medium

In the present work, an innovative leach proof nanocatalyst based on dendritic fibrous nanosilica (DFNS) modified with ionic liquid loaded Fe₃O₄ NPs and CuI salts was designed and applied for the rapid synthesis of imidazo[1,2‐a]pyridines from the reaction of phenyl acetylene, 2‐aminopyridine, and aldehydes in aqueous medium. The structure of the synthesized nanocatalyst was studied by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR), flame atomic absorption spectroscopy (FAAS), energy‐dispersive X‐ray (EDX), and X‐ray diffraction (XRD), vapor–liquid–solid (VLS), and adsorption/desorption analysis (Brunauer–Emmett–Teller [BET] equation) instrumental techniques. CuI/Fe₃O₄NPs@IL‐KCC‐1 with high surface area (225 m² g^?1) and porous structure not only exhibited excellent catalytic activity in aqueous media but also, with its good stability, simply recovered by an external magnet and recycled for eight cycles without significant loss in its intrinsic activity. Higher catalytic activity of CuI/Fe₃O₄NPs@IL‐KCC‐1 is due to exceptional dendritic fibrous structure of KCC‐1 and the ionic liquid groups that perform as strong anchors to the loaded magnetic nanoparticles (MNPs) and avoid leaching them from the pore of the nanocatalyst. Green reaction media, shorter reaction times, higher yields (71–97%), easy workup, and no need to use the chromatographic column are the advantages of the reported synthetic method.     

Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation,characterization, and first catalytic application in the multi‐component synthesis of tetrahydrobenzo[a]xanthene‐11‐ones

New Schiff base (SB) functionalized graphene oxide (GO) nanosheets containing phosphomolybdic counter‐anion H₂PMo₁₂O₄₀^¯ (H₂PMo) were successfully prepared by grafting of 3‐aminopropyltriethoxysilane (APTS) on GO nanosheets followed by condensation with benzil and finally reaction with phosphomolybdic acid (H₃PMo₁₂O₄₀, denoted as H₃PMo) and characterized using Fourier transform infrared (FT‐IR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size distribution, energy‐dispersive X‐ray (EDX) analysis, EDX elemental mapping, and inductively coupled plasma optical emission spectrometry (ICP‐OES). The prepared new nanomaterial, denoted as GO‐SB‐H₂PMo, was shown to be an efficient heterogeneous catalyst in one‐pot, three‐component reaction of β‐naphthol, aldehydes, and dimedone, giving high yields of tetrahydrobenzo[a]xanthene‐11‐ones within short reaction times. The catalyst is readily recovered by simple filtration and can be recycled and reused several times with no significant loss of catalytic activity.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

High Performance Non‐enzymatic Glucose Sensor Based on One‐Step Electrodeposited Nickel Sulfide

Nanostructured NiS thin film was prepared by a one‐step electrodeposition method and the structural, morphological characteristics of the as‐prepared films were analyzed by X‐ray diffractometry (XRD), field emission scanning electron microscopy (FESEM) and energy dispersive X‐ray analysis (EDAX). The electrocatalytic activity of NiS thin film towards glucose oxidation was investigated by fabricating a non‐enzymatic glucose sensor and the sensor performance was studied by cyclic voltammetry (CV) and amperometry. The fabricated sensor showed excellent sensitivity and low detection limit with values of 7.43 μA μM ^?1 cm^?2 and 0.32 μM , respectively, and a response time of <8 s.     

Synthesis,characterization and application of 3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate as nanostructured catalyst for the tandem reaction of β‐naphthol with aromatic aldehydes and amide derivatives

3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate {[Msim]FeCl₄} was prepared and fully characterized by fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDX) and vibrating sample magnetometer (VSM) and used, as an efficient catalyst, for the tandem reaction of β‐naphthol with aromatic aldehydes and benzamide at 110 °C under solvent‐free conditions to give 1‐amidoalkyl‐2‐naphthols in high yields and very short reaction times.     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).     

Synthesis,characterization and application of nano‐CoAl2O4 as an efficient catalyst in the preparation of hexahydroquinolines

In this work, nano‐CoAl₂O₄ was prepared and characterized by FT‐IR, energy dispersive X‐ray analysis (EDX), X‐ray diffraction patterns (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and transmission electron microscopy (TEM). Nano‐CoAl₂O₄ was applied for the synthesis of hexahydroquinoline derivatives by the condensation reaction between ethyl acetoacetate, dimedone and various aldehydes. These reactions were carried out at 80 °C under solvent‐free conditions.     

Chloromethylated polystyrene supported copper (II) bis–thiazole complex: Preparation,characterization and its application as a heterogeneous catalyst for chemoselective and homoselective synthesis of aryl azides

This work deals the synthesis of aryl azides catalyzed by heterogeneous copper (II) complex of 3,5–bis (2–benzothiazolyl) pyridine, [Cu (II)(BTP)(OTf)₂], immobilized on chloromethylated polystyrene, [Cu (II)(BTP)(OTf)₂]@CMP. The prepared catalyst was characterized by different analytical techniques such as X‐ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (SEM), energy dispersive X–ray spectroscopy (EDX), elemental analysis, and FT‐IR and UV–Vis spectroscopic methods. This catalytic system showed excellent activity in the synthesis of aryl azides by the reaction of aryl halides with sodium azide in the presence of catalytic amounts of [Cu (II)(BTP)(OTf)₂]@CMP. Moreover, this unique catalyst could be recovered easily and reused several times without any considerable loss of its catalytic activity.