High temporal resolution monitoring of enzyme reaction and inhibition using optically gated vacancy capillary electrophoresis and immobilized enzyme

A novel method for monitoring of enzyme reaction and inhibition with high temporal resolution was developed by using optically gated vacancy capillary electrophoresis (OGVCE) with laser-induced fluorescence (LIF) detection and immobilized enzyme. Trypsin cleavage reaction and inhibition were investigated by the presented OGVCE-LIF assay, using carboxyfluorescein (FAM) end-labeled Angiotensin as the substrate and commercially available immobilized trypsin. The substrate and the product were continuously loaded into the capillary by the electroosmotic flow while the immobilized enzyme remained in the sample vial. Substrate consumption and product formation were monitored simultaneously at 5 s interval during the whole reaction time. The enzymatic reaction rates obtained from the substrate and the product were highly consistent. The enzyme activity and the Michaelis constants of trypsin cleavage reaction, as well as the inhibition constant (for reversible competitive inhibitor) and the inhibition fraction (for irreversible inhibitor), were obtained. It was showed that the reported OGVCE-LIF method can perform fast, accurate, sensitive and reproducible CE enzyme assay with high temporal resolution, thus has great potential in application of the enzyme-substrate systems with fast reaction rate and the fluorescent substrate and products.     

热动力学研究L-抗坏血酸和Cu~2+对过氧化氢酶的协同抑制

在310．15K，pH=7．0的0．1mol·L~(-1)Na_2HPO_4-NaH_2PO_4缓二者同时存 在时，过氧化氢酶催化H_2O_2分解反应的动力学规律。发现L-抗坏血酸和C~(2+)单 独存在时对酶反应没有明显的抑制作用，二者共存时，对反应有非线性抑制作用。 在一定的酶和底物浓度下，L-抗坏血酸和Cu~(2+)不影响率方程的形式，只减小了一级 反应速率常数．酶活性随抑制剂浓度变化关系呈S形曲线．结合实验结果和文献，提出 了一L-抗坏血酸和Cu~(2+)协同抑制过氧化氢酶的可能机理.     

Kinetics of Inactivation of Aminoacylase I During Modification of Its Thiol Groups by DPDS and PCMB

The kinetics theory of the substrate reaction during modification of enzyme activity previously described by Tsou has been applied to a study on the kinetics of the course of inactivation of aminoacylase I by DPDS and PCMB.From the results obtained we have found that the inactivation reaction of aminoacylase I by DPDS is noncomplexing inhibition,and PCMB reaction is complexing inhibition.The microscopic constants for the reaction of the inactivator with free enzyme and the enzyme-substrate complex were determined.     

Catalase biosensor for the determination of hydrogen peroxide,fluoride and cyanide

The enzyme catalase, which catalyses the decomposition of hydrogen peroxide to oxygen and water, was immobilized in a membrane by entrapping it in polyacryl amide and contacted to a Clark-type oxygen electrode. With the resulting catalase biosensor it was possible to detect the substrate hydrogen peroxide and the inhibitors fluoride and cyanide in phosphate buffer.The sensor was integrated into a flow system. In the concentration range from 5–200 mg/l a linear dependence of the peak height on the hydrogen peroxide concentration was obtained. The average decrease in activity during 30 days of storage at 6 °C was 17%. Fluoride and cyanide could be determined by measuring the inhibition of the enzymatic reaction in the same flow system. The analysis was executed in three steps; namely determination of the original activity by pumping substrate solution, inhibition of the enzyme by pumping inhibitor solution, and determination of the activity after the inhibition.The decrease in activity correlated with the inhibitor concentration of the sample, but a linear dependence was not found. The inhibition of fluoride and cyanide was both reversible, the enzyme membrane could be reactivated completely by pumping substrate solution. The detection limit was 1 mg/l for fluoride and 1.5 mg/l for cyanide.     

On a nonelementary progress curve equation and its application in enzyme kinetics

The analytical equation describing progress curves of an enzyme catalyzed reaction acting upon the Michaelis-Menten mechanism has been known for the case in which only the free enzyme incurs a loss of its activity, either spontaneously or as a result of an irreversible inhibitor action. The solution of differential equations which defines the rates of enzyme inactivation and substrate utilization is expressed by a nonelementary function in equation of an implicit type that precludes direct calculation of the extent of reaction at any time. Previously, the implicit equations have been rearranged to the alternative formulas and solved by the Newton-Raphson method, but this procedure may fail when used upon the presented equation. For this reason the other root-finding numerical method was applied, and the enzyme kinetic parameters of such numerically solved implicit equation for the reaction mechanism of irreversibly inhibited acetylcholinesterase were fitted to the experimental data by a nonlinear regression computer program.     

Screening of aromatase inhibitors in traditional Chinese medicines by electrophoretically mediated microanalysis in a partially filled capillary

An electrophoretically mediated microanalysis method with partial filling technique was developed for screening aromatase inhibitors in traditional Chinese medicine. The in‐capillary enzymatic reaction was performed in 20 mM sodium phosphate buffer (pH 7.4), and sodium phosphate buffer (20 mM, pH 8.0) was used as a background electrolyte. A long plug of coenzyme reduced β‐nicotinamide adenine dinucleotide 2′‐phosphate hydrate dissolved in the reaction buffer was hydrodynamically injected into a fused silica capillary followed by the injection of reaction buffer, enzyme, and substrate solution. The reaction was initiated with a voltage of 5 kV applied to the capillary for 40 s. The voltage was turned off for 20 min to increase the product amount and again turned on at a constant voltage of 20 kV to separate all the components. Direct detection was performed at 260 nm. The enzyme activity was directly assayed by measuring the peak area of the produced β‐nicotinamide adenine dinucleotide phosphate and the decreased peak area indicated the aromatase inhibition. Using the Lineweaver–Burk equation, the Michaelis–Menten constant was calculated to be 50 ± 4.5 nM. The method was applied to the screening of aromatase inhibitors from 15 natural products. Seven compounds were found to have potent AR inhibitory activity.     

Kinetic study of angiotensin converting enzyme activity by capillary electrophoresis after in-line reaction at the capillary inlet

The in-capillary reaction of angiotensin converting enzyme (ACE) with the tripeptide substrate hippuryl-L-histidyl-L-leucine was studied. ACE activity was determined by the quantitation of the product, hippuric acid, at 230 nm. Reaction occurred at the capillary inlet during a predetermined waiting period, followed by the electrophoretic separation of the compounds. When the set-up was reversed, i.e. reaction at the opposite side after short-end injection of enzyme and substrate, separation was achieved in less than 5 min. Using the Lineweaver-Burk equation, an average Michaelis constant for ACE from rabbit lung was calculated to be 1.16 +/- 0.12 mM, a value consistent with previously reported data.     

Effect-directed analysis by high-performance liquid chromatography with gas-segmented enzyme inhibition

A reversed-phase high-performance liquid chromatography system with UV-detector was equipped with an on-line acetylcholinesterase inhibition assay to achieve effect-directed analysis of potentially toxic samples. The enzyme activity was detected colorimetrically using Ellman's reagent. The inhibition and substrate conversion took place in glass capillaries at a 100 microL/min flow rate. Extra-column band spreading in the reaction coils reduces the sensitivity and separation power of biochemical detectors severely. Knitted reactors exhibited no reduction of longitudinal dispersion in the tested flow range. The implementation of air-segmentation allowed an extended inhibition and substrate conversion time without a significant loss of chromatographic resolution. The limit of detection of two model compounds carbofuran (carbamate) and paraoxon-ethyl (organophosphate) was determined to be 13 ng (injected mass) and 7.4 ng, respectively, applying an isocratic chromatography method. A mixture of five insecticides was separated by a gradient elution and the inhibitory effect on the enzyme activity could be detected with high resolution. The band width at half height of the enzyme inhibition detector signal after a reaction time of about 8 min or 4.2 m of capillary, respectively, increased only by a factor of 1.4 compared to the UV-detector signal.     

KINETICS OF THE IRREVERSIBLE MODIFICATION OF ENZYME ACTIVITY IN A SYSTEM OF COUPLED ENZYME ASSAY (Ⅰ)——ONLY PRIMARY ENZYME MODIFIED BY REAGENT Y

Kinetic equations are derived for the substrate reaction during simultaneous irreversible modification of enzyme activity for systems using coupled enzyme assay. It has been shown that the method proposed previously by Tsou for determining the irreversible inhibition constants can also be used in the present situation. Moreover, the criteria proposed to distinguish between different inhibition types are also applicable.     

Kinetics of Enzymatic Synthesis of Cinnamyl Butyrate by Immobilized Lipase

This work illustrates the enzymatic synthesis of cinnamyl butyrate by esterification of butyric acid and cinnamyl alcohol. Experiments were performed to study the various operating parameters such as molar ratio, enzyme concentration, temperature, and speed of agitation. Also, the suitable kinetic model for esterification reaction was predicted and the various kinetic parameters were determined. It has been observed that the experimental results agree well with the simulated results obtained by following the ping-pong bi-bi mechanism with dead-end inhibition by both the substrate acid and alcohol. The highest 90% conversion of butyric acid was observed after 12 h at the following reaction conditions: substrate molar ratio 1:2 (butyric acid/cinnamyl alcohol), temperature 50 °C, enzyme loading 2% (with respect to the weight of the substrates), and agitation speed 250 rpm. Diffusional mass transfer limitations between substrate and enzyme surface do not show significant effect on reaction kinetics. Enzyme reusability study reveals that it retains 85% of its catalytic activity after five consecutive cycles.     

On‐plate enzyme and inhibition assay of glucose‐6‐phosphate dehydrogenase using thin‐layer chromatography

We performed on‐plate enzyme and inhibition assays of glucose 6‐phosphate dehydrogenase using thin‐layer chromatography. The assays were accomplished based on different retardation factors of the substrates, enzyme, and products. All the necessary steps were integrated on‐plate in one developing process, including substrate/enzyme mixing, reaction starting, and quenching as well as product separation. In order to quantitatively measure the enzyme reaction, the developed plate was then densitometrically evaluated to determine the peak area of the product. Rapid and high‐throughput assays were achieved by loading different substrate spots and/or enzyme (and inhibition) spots in different tracks on the plate. The on‐plate enzyme assay could be finished in a developing time of only 4 min, with good track‐to‐track and plate‐to‐plate repeatability. Moreover, we determined the K_m values of the enzyme reaction and K_i values of the inhibition (Pb²⁺ Cd²⁺ and Cu²⁺ as inhibitors), as well as the corresponding kinetics using the on‐plate assay. Taken together, our method expanded the application of thin‐layer chromatography in enzyme assays, and it could be potentially used in research fields for rapid and quantitative measurement of enzyme activity and inhibition.     

Electrochemical pesticide sensitivity test using acetylcholinesterase biosensor based on colloidal gold nanoparticle modified sol-gel interface

Based on the change in electrochemical behavior of enzymatic activity induced by pesticide, a novel electrochemical method for investigation of pesticide sensitivity using acetylcholinesterase (AChE) biosensor was developed. The sol-gel-derived silicate network assembling gold nanoparticles (AuNPs-SiSG) provided a biocompatible microenvironment around the enzyme molecule to stabilize its biological activity and prevented them from leaking out of the interface. The composite was characterized using atomic force microscopy and proved to be chemically clean, porous and homogeneous. AuNPs promoted a conductive pathway for electron transfer and improved electrochemical reactions at a lower potential. Typical pesticides such as monocrotophos, methyl parathion and carbaryl were selected for pesticide sensitivity tests. Due to the inhibitions of pesticides, the electrochemical responses of substrate on AChE-sensors decreased greatly. The inhibition curves showed good correspondence with the results by UV spectrophotometry assay. The proposed electrochemical pesticide sensitivity test exhibited high sensitivity, desirable accuracy, low cost and simplified procedures. This method could be developed as a conventional method to select efficient enzyme inhibitors and investigate toxic compounds against to enzyme.     

Kinetic substrate quantification by fitting the enzyme reaction curve to the integrated Michaelis–Menten equation

The reliability of kinetic substrate quantification by nonlinear fitting of the enzyme reaction curve to the integrated Michaelis-Menten equation was investigated by both simulation and preliminary experimentation. For simulation, product absorptivity epsilon was 3.00 mmol(-1) L cm(-1) and K(m) was 0.10 mmol L(-1), and uniform absorbance error sigma was randomly inserted into the error-free reaction curve of product absorbance A(i) versus reaction time t(i) calculated according to the integrated Michaelis-Menten equation. The experimental reaction curve of arylesterase acting on phenyl acetate was monitored by phenol absorbance at 270 nm. Maximal product absorbance A(m) was predicted by nonlinear fitting of the reaction curve to Eq. (1) with K(m) as constant. There were unique A(m) for best fitting of both the simulated and experimental reaction curves. Neither the error in reaction origin nor the variation of enzyme activity changed the background-corrected value of A(m). But the range of data under analysis, the background absorbance, and absorbance error sigma had an effect. By simulation, A(m) from 0.150 to 3.600 was predicted with reliability and linear response to substrate concentration when there was 80% consumption of substrate at sigma of 0.001. Restriction of absorbance to 0.700 enabled A(m) up to 1.800 to be predicted at sigma of 0.001. Detection limit reached A(m) of 0.090 at sigma of 0.001. By experimentation, the reproducibility was 4.6% at substrate concentration twice the K(m), and A(m) linearly responded to phenyl acetate with consistent absorptivity for phenol, and upper limit about twice the maximum of experimental absorbance. These results supported the reliability of this new kinetic method for enzymatic analysis with enhanced upper limit and precision.     

Cyclic voltammetric simulation of electrochemically mediated enzyme reaction and elucidation of biosensor behaviors

A cyclic voltammetric simulation that can be applied to an electrochemically mediated enzyme reaction involving any substrate and mediator concentration was developed. Concentration polarization of the substrate in the vicinity of an electrode was considered as well as mediator concentration. Reversible electrochemical reaction with one electron followed by an enzyme reaction with two electrons was modeled. The differential equations for the mediator and substrate were solved using digital simulation techniques. The calculated cyclic voltammograms showed prepeaks when there was a low substrate concentration, high mediator concentration, and high enzyme activity. The prepeak was experimentally observed in the case of an enzyme electrode co-immobilized with a redox polymer. The enzyme electrode loaded at high redox polymer and high enzyme content showed a prepeak at low substrate concentration in the cyclic voltammogram.     

Versatile synthesis of probes for high-throughput enzyme activity screening

Mass spectrometry based technologies are promising as generalizable high-throughput assays for enzymatic activity. In one such technology, a specialized enzyme substrate probe is presented to a biological mixture potentially exhibiting enzymatic activity, followed by an in situ enrichment step using fluorous interactions and nanostructure-initiator mass spectrometry. This technology, known as Nimzyme, shows great potential but is limited by the need to synthesize custom substrate analogs. We describe a synthetic route that simplifies the production of these probes by fashioning their perfluorinated invariant portion as an alkylating agent. This way, a wide variety of compounds can be effectively transformed into enzyme activity probes. As a proof of principle, a chloramphenicol analog synthesized according to this methodology was used to detect chloramphenicol acetyltransferase activity in cell lysate. This verifies the validity of the synthetic strategy employed and constitutes the first reported application of Nimzyme to a non-carbohydrate-active enzyme. The simplified synthetic approach presented here may help advance the application of mass spectrometry to high-throughput enzyme activity determination.

Characterisation of inhibitors of acetylcholinesterase by an automated amperometric flow-injection system

Acetylcholinesterase was immobilised on magnetic particles and integrated in a flow-injection system via a magnetic reactor. Enzyme activity was determined amperometrically using acetylthiocholine chloride as enzyme substrate. This system was applied to enzyme inhibition tests. Inhibition constants and lower detection limits were determined for carbofuran, paraoxon, malaoxon and paraoxon-methyl. The resulting data were compared to those obtained with a photometric test, i.e. the determination of thiocholine via its reaction with the Ellman's reagent 5,5'-dithio-bis-2-nitrobenzoic acid using the same flow system. As they correlated well to those reported for the native enzyme the flow-injection analysis device can be applied to automated determination and characterisation of enzyme inhibitors.     

Capillary electrophoretic analysis of alkaline phosphatase inhibition by theophylline

An analytical method for studying enzyme inhibition has been developed using capillary electrophoresis with laser-induced fluorescence detection. This technique is based on electrophoretic mixing of zones of enzyme and inhibitor in substrate-filled capillaries. Enzyme catalytic activity is measured by detecting the fluorescent reaction product as it migrates past the detector. Reversible enzyme inhibition is indicated by a transient decrease in product formation. The enzyme, alkaline phosphatase, has been studied using the fluorogenic substrate AttoPhos ([2,2'-bibenzothiazol]-6-hydroxy-benzthiazole phosphate). This assay has been used to quantify theophylline, a noncompetitive, reversible inhibitor of alkaline phosphatase. The detection limit for theophylline is estimated at 3 microM, and 8.6 amole of alkaline phosphatase are required for each assay. The calculated K(i) for theophylline is 90 microM for the capillary electrophoretic enzyme-inhibitor assays.     

Kinetic Parameters of Choline Esterase-Catalyzed Hydrolysis in the Presence of the Antigen-Antibody Immune Complex

The influence of antigen-antibody immune complexes (with the immune pairs of Candida albicans and Phytophtora infestans antigens and the corresponding antibodies) on the catalytic activity of immobilized choline esterase in the enzyme immunosensor was studied. The antigen-antibody immune complex can act as effector of choline esterase, suppressing or enhancing its catalytic activity depending on the ratio of the components of the biospecific interaction (antibodies, antigen, enzyme, and substrate). The kinetic parameters of hydrolysis of butyryl thiocholine iodide, a specific substrate of choline esterase (apparent Michaelis constants, maximal reaction rates, activation and inhibition constants) were calculated at various concentrations of the substrate and antigen and at various dilutions of the antibodies. The types and kinds of the observed effects were determined. The effect of pH on the kinetic parameters of the enzymatic reaction was studied. Various pathways, depending on conditions, were suggested for choline esterase-catalyzed hydrolysis of butyryl thiocholine iodide in the presence of the antigen-antibody immune complex.     

Extraction and Detection of Pesticides by Cholinesterase Inhibition in a Two‐Phase System: a Strategy to Avoid Heavy Metal Interference

Abstract

A novel method of extraction has been developed to avoid the presence of heavy metals during the measurement of pesticides based on acetylcholinesterase (AchE) inhibition. Heavy metals have been in fact demonstrated in this article to interfere when the assay is performed by using the classic spectrophotometric Ellman's method. We present the results obtained with an assay system using two different phases, one organic and the other aqueous, in which the pesticide and the enzyme are, respectively, solubilized. In a first step, the concentration of the substrate acetylthiocholine (1 mM), of the enzyme (7 mU mL^?1), and the reaction time (20 min) for measurement of enzyme activity were optimized in aqueous solution. Next, the effect of an organic phase on the enzyme activity was studied by the addition of various solvents with the activity being evaluated after 10 min of mixing. It was found that by using hexane, the enzyme retained almost 100% of its activity, and this solvent was chosen for further development of the pesticide assay. Hexane was spiked with different concentrations of pesticides and then added to the enzyme aqueous phase. The pesticides were shown to be able to inhibit the enzyme by interaction at the interface between the two solutions. The degree of inhibition obtained with increasing amounts of pesticide was evaluated. A 50% inhibition was observed for a paraoxon solution of 9×10^?7 M.     

Synthesis of simplified hybrid inhibitors of type 1 17beta-hydroxysteroid dehydrogenase via cross-metathesis and sonogashira coupling Reactions

[structure: see text] The inhibitor of type 1 17beta-hydroxysteroid dehydrogenase EM-1745 (1) exhibits affinity for both the substrate (estrone or estradiol) and the cofactor (NAD(P)H) binding domains. However, to increase its bioavailability, this compound needs to be simplified. The efficient and convergent synthesis of simplified substrate/cofactor hybrid inhibitors (compounds 2) involving a cross-metathesis and a Sonogashira coupling reaction as key steps is described. Compounds 2a-c were also tested as enzyme inhibitors and compared to EM-1745.