Biotechnological storage and utilization of entrapped solar energy

Our laboratory has recently developed a device employing immobilized F₀F₁ adenosine triphosphatase (ATPase) that allows synthesis of adenosine triphosphate (ATP) from adenosine 5′-diphosphate and inorganic phosphate using solar energy. We present estimates of total solar energy received by Earth’s land area and demonstrate that its efficient capture may allow conversion of solar energy and storage into bonds of biochemicals using devices harboring either immobilized ATPase or NADH dehydrogenase. Capture and storage of solar energy into biochemicals may also enable fixation of CO₂ emanating from polluting units. The cofactors ATP and NADH synthesized using solar energy could be used for regeneration of acceptor d-ribulose-1,5-bisphosphate from 3-phosphoglycerate formed during CO₂ fixation.     

Ab initio and density functional theory study of the enthalpies of formation of F2SOx and FClSOx (x=1, 2)

Enthalpies of formation of F₂SO, F₂SO₂, FClSO and FClSO₂ molecules have been determined using ab initio molecular orbital theory and density functional theory (DFT) calculations. Different DFT approaches and levels of the Gaussian-3 and the complete basis set (CBS) ab initio model chemistries have been employed to calculate enthalpies of formation from both total atomization energies and isodesmic reaction schemes. The best values at 298 K for F₂SO, F₂SO₂, FClSO and FClSO₂ as derived from an average of G3, G3B3, CBS-Q and CBS-QB3 isodesmic energies are −140.6, −181.1, −92.6 and −132.3 kcal mol⁻¹, respectively. The results obtained suggest that the accumulated small component errors found in the DFT-based methods are significantly reduced at the ab initio levels employed. Structural properties, harmonic vibrational frequencies, mode assignations and infrared intensities derived from B3LYP and mPW1PW91 functional with the 6-311+G(3df) basis set are presented.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by Ti(IV) complexes of C2-symmetrical chiral BINOL derivatives

Enantioselective addition of diethylzinc to a series of aromatic aldehydes is developed using new chiral C₂-symmetric ligand (S)-2,2′-(1,1′-binaphthyl-2,2′-diylbis(oxy))bis(methylene)bis(4-nitrophenol) (S)-2b. The catalytic system employing 10 mol % of (S)-2b and 120 mol % of Ti(OiPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes with electron-donating and electron-withdrawing substituents, giving up to 89% ee and up to 95% yield of the corresponding secondary alcohol under mild conditions.     

Calculation of chromatographic properties of barbiturates by molecular topology

Summary A study has been made of the relationship between the R_F values obtained by thin layer chromatography for a group of barbiturates and the connectivity indices proposed by Kier and Hall. By using multivariable regression we obtained the corresponding connectivity functions, which were selected on the basis of their respective statistics parameters. The regression analysis of the connectivity functions shows a correct prediction of the experimental elution sequence for this group of molecules on silicagel with two mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, demonstrating good stability and null randomness in all cases. The results also demonstrated that different structural features determine the R_F values in TLC of barbiturates.     

Oxidation of Thiols Using K 2 S 2 O 8 in Ionic Liquid

A green, straightforward, and novel method for oxidation of thiols to the corresponding disulfides is reported using K ₂ S ₂ O₈ in the ionic liquid 1-butyl-3-methylimidazolium bromide [(bmim)Br] at 65–70°C. The corresponding disulfides were obtained in excellent yield and short reaction time.     

A novel reduction reaction for the conversion of aldehydes, ketones and primary, secondary and tertiary alcohols into their corresponding alkanes

A novel one-pot reaction has been developed for the reduction of aldehydes, ketones and primary, secondary and tertiary alcohols into their corresponding alkyl function. This is also the first reported method which can efficiently reduce primary, secondary, or tertiary alcohols, without affecting carbon-carbon double bonds, into their corresponding alkyl function in high yields. The reduction utilises either diethylsilane or n-butylsilane as the reducing agent in the presence of the Lewis acid catalyst tris(pentafluorophenyl)borane.     

Mapping vortex-like hydrodynamic flow in microfluidic networks using fluorescence correlation spectroscopy

The ability to quickly measure flow parameters in microfluidic devices is critical for micro total analysis system (μTAS) applications. Macrofluidic methods to assess flow suffer from limitations that have made conventional methods unsuitable for the flow behavior profiling. Single molecule fluorescence correlation spectroscopy (FCS) has been employed in our study to characterize the fluidic vortex generating at a T-shape junction of microscale channels. Due to its high spatial and temporal resolution, the corresponding magnitudes relative to different flow rates in the main channel can be quantitatively differentiated using flow time (τ_F) measurements of dye molecules traversing the detection volume in buffer solution. Despite the parabolic flow in the channel upstream, a heterogeneous distribution of flow has been detected across the channel intersection. In addition, our current observations also confirmed the aspect of vortex-shaped flow in low-shear design that was developed previously for cell culture. This approach not only overcomes many technical barriers for examining hydrodynamic vortices and movements in miniature structures without physically integrating any probes, but it is also especially useful for the hydrodynamic studies in polymer-glass based micro -reactor and -mixer.     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

Effects of precipitant on microstructure and luminescent properties of Lu2O3:Eu3+ nanopowders and ceramics

Nanocrystalline Lu(2)O(3):Eu(3+) was prepared by co-precipitation method using ammonium hydrogen carbonate and ammonium oxalic acid as precipitants, respectively. The crystal structure and morphology were analyzed by means of XRD and TEM. The resultant powders were sintered into transparent ceramics in vacuum and then in nitrogen without any additive. The surface morphology of the unpolished sintered specimens was characterized using SEM. The effect of different precipitants on microstructure of the nanopowders and transparency of the ceramics are compared. The excitation and emission spectra of Lu(2)O(3):Eu(3+) powders and ceramics were measured at room temperature by using synchrotron radiation as the light source. The fluorescence decay times of all specimens were analyzed. Luminescence of the ceramics decays faster than the corresponding nanopowders.     

Synthesis of 1-fluoroindan-1-carboxylic acid (FICA) and its properties as a chiral derivatizing agent

1-Fluoroindan-1-carboxylic acid (FICA) (1) was designed and synthesized as its methyl ester (FICA Me ester) (4) in order to develop an efficient chiral derivatizing agent (CDA) which excels α-methoxy-α-(trifluoromethyl)phenylacetic acid (MTPA) in capability. FICA Me ester (4) was prepared by fluorination of methyl 1-hydroxyindan-1-carboxylate (3) with (diethylamino)sulfur trifluoride (DAST) and derived to the esters of racemic secondary alcohols by ester exchange reaction. The resulting Δδ_F value was large in the case of 2-butyl ester of FICA (5a), whereas not detectable in the case of the corresponding MTPA ester (6a). The magnitude of the Δδ_H values was similar to that of MTPA esters. The diastereomers of (R)-(−)-8-phenylmenthyl ester of FICA (5i) was separated and their ¹H NMR analyses revealed that the concept of the modified Mosher's method was successfully applied to 5i.     

Simple and Efficient One-Step Synthesis of a Highly Enantioselective Catalyst 3,3′-Di(pyrrolidinylmethyl)-H8BINOL

A concise one-step synthetic method was developed to prepare (S)-3,3′-di(pyrrolidinylmethyl)-H₈BINOL via Mannich-type reaction. Under the optimal reaction conditions, the yield reached 83% (by recrystallization) and 93% (by column chromatography). This new procedure has reduced the molar ratio of pyrrolidine/paraformaldehyde/(S)-H₈BINOL from 58:58:1 to 3:3:1, which simplified the previously reported two-step reaction to a one-step reaction with no need for laborious operations such as cooling and solvent degassing, and avoided discharging a large amount of dioxane-containing waste water.     

A simple reduction of methyl aromatic esters to alcohols using sodium borohydride-methanol system

Several aromatic esters were reduced to the corresponding alcohol by using sodium borohydride-methanol system. The reduction was completed within 2.0-4.0 h after refluxing in THF. The alcohol products were isolated after aqueous workup in good yields (88-97%).     

Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor's F and Student's t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

Brønsted acid-mediated ring-opening reactions of methylenecyclopropanes: a dramatic counter ion effect

We report herein two different ring-opening patterns of methylenecyclopropanes (MCPs) in the presence of two Brønsted acids heptadecafluorooctane-1-sulfonic acid (C₈F₁₇SO₃H) and toluene p-sulfonic acid (TsOH) under mild conditions: (a) the ring-opening of MCPs by H₂O and subsequent etherification give the corresponding homoallylic ethers in the presence of heptadecafluorooctane-1-sulfonic acid; (b) the direct ring-opening of MCPs by the Brønsted acid gives the corresponding homoallylic alcohol derivatives in the presence of toluene p-sulfonic acid.     

Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor’s F and Student’s t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

The fluorination of scheelite with ammonium bifluoride

The interaction of scheelite with ammonium bifluoride was studied. It was shown that sheelite reacts with NH₄HF₂ at room temperature, in contrast with tungstic oxide and other tungsten compounds. Two complexes are formed (NH₄)₃WO₃F₃ and the previously unknown (NH₄)₂WO₃F₂. The compounds obtained were fluorinated to (NH₄)₃WO₂F₅ (endothermic peaks at 170° and 90°C, respectively).Cubic monocrystals of (NH₄)₃WO₂F₅ were obtained. The cubic form is unstable and underwent a lattice transformation at room temperature to the more stable tetragonal form, which was transformed reversibly into the cubic form at 140°C. The thermal decomposition of (NH₄)₂WO₃F₂ was studied.

---

Zusammenfassung Es wird die Wechselwirkung von Scheelit und Ammoniumhydrogenfluorid untersucht. Im Gegensatz zu Wolframoxid und anderen Wolframverbindungen geht Scheelit mit Ammoniumhydrogenfluorid bei Raumtemperatur eine chemische Reaktion ein, wobei zwei verschiedene Komplexe gebildet werden: (NH₄)WO₃F₃ und der bisher unbekannte Komplex (NH₄)₂WO₃F₂. Die erhaltenen Verbindungen werden zu (NH₄)₃WO₂F₅ fluoriert (endotherme Peaks bei 170° bzw. 90°C).Man erhält die kubischen Einkristalle (NH₄)₃WO₂F₅. Die unstabile kubische Form wandelte sich bei Raumtemperatur in die stabilere tetragonale Form um, die bei 140°C reversibel wieder in die kubische Form überführt werden kann.Es wird weiterhin die thermische Zersetzung von (NH₄)₂WO₃F₂. untersucht.

     

Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

NH_4Y_3F_(10)多孔纳米晶的制备及其在MALDI-TOF-MS中的应用(英文)

利用水热法合成出NH4Y3F10多孔纳米晶。由于Y3+离子的激发态能量可以转移给具有较高振动能的有机分子,因此这些多孔纳米晶可以作为基质辅助激光解析电离飞行时间质谱的基体材料,用于检测小分子和聚乙二醇。通过与商品化的基体材料(CHCA、DHB)对比,证明NH4Y3F10多孔纳米晶是一种性能优异的基体材料。这种新型基体材料已经成功应用于有机分子、小肽、C60、缺氧诱导因子(HIFs)和聚乙二醇的分子量的检测,显示出这种基体材料具有广泛的应用前景。     

Synthesis and green up-conversion fluorescence of colloidal La0.78Yb0.20Er0.02F3/SiO2 core/shell nanocrystals

Water-soluble PVP-stabilized hexagonal-phase La_0.78Yb_0.20Er_0.02F₃ nanocrystals (NCs) were synthesized by hydrothermal method. The NCs were coated with a very thin silica shell, and amino groups were introduced to the surface of silica shells by copolymerization of 3-aminopropyl(triethoxy)silane. The core/shell NCs can be dispersed in ethanol and water to form stable colloidal solution. The transmission electron microscopy (TEM), selected area electron diffraction (SAED), powder X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR) were used to characterize the core/shell materials. In addition, the green up-conversion fluorescence mechanism of La_0.78Yb_0.20Er_0.02F₃/SiO₂ NCs was studied with a 980-nm diode laser as excitation source. The water solubility, small core/shell particles size, and well colloidal stability mean the green up-conversion fluorescence NCs have potential applications in bioassay.     

Hydrated ferric sulfate catalyzed synthesis of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives through one-pot reaction

A wide variety of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives (4a–z) were synthesized through a one-pot three-component reaction from indoles, aromatic aldehydes, and thiols at room temperature using hydrated ferric sulfate as a Lewis acid catalyst. The key features of the present protocol are mild and simple reaction procedure, moderate to good yields, requirement of inexpensive and reusable catalyst, no formation of dithioacetals derivatives from the corresponding aldehydes as well as bis-(indolyl) methane derivatives.