The preparation of copper(II) and copper(I) salts in acetonitrile using group VA and VB pentafluorides

Copper(II) fluorine reacts with the pentafluorides, TaF₅, PF₅, and AsF₅, in acetonitrile to give solvated Cu^II, hexafluoroanion salts. These react with copper metal to give the corresponding Cu^I compounds. Similar reactions occur between AsF₅ and silver(I) or thallium(I) fluorides, but silver(II) fluoride reacts with MeCN, and Ag^I hexafluoroarsenate is formed. PF₅ oxidises Cu slowly in MeCN to give Cu^I hexafluorophosphate, but AsF₅ has no oxidising ability towards metals in MeCN. Spectroscopic data for Cu(MF₆)₂·5MeCN and Cu(MF₆)·4MeCN (M = Ta or P) are discussed.     

Neue Kupfer(I,II)-Verbindungen

New Copper(I, II) Compounds Complexes of the type [Cu^II(N∩N)₂][Cu^ICl_1+x]_2x (N∩N = en, pn, 2-amino picoline) are prepared from Cu(N∩N)₂Cl₂ and copper(I) chloride. [Cu^II(enac)][Cu^ICl₂]₂ — a complex with a macrocyclic cation — is obtained, by the reaction of Cuen₂Cl₂ in aqueous acetone. Diacetyl monoxime partially reduces copper(II) of Cu(NSMe)₂Cl₂ and in this way causes the formation of [Cu(NSMe)_2][CuCl₃] (NSMe = β-aminoethyl methylsulfide). On the other hand a template reaction of this oxime with Cu(NSMe)₂ (ClO₄)₂ produces Cu^II(ONNSMe)(ClO₄) (HONNSMe?CH₃C(NOH)C(NCH₂CH₂SCH₃)CH₃), which shows a reduced paramagnetism. Basing on magnetic behaviour, i. r. and vis spectra the structure of the new compounds is discussed.     

Synthesis of Copper(I) Complexes with Ketimide and Hydrazide Ligands

Copper(I) chloride reacted with lithium ketimides to form tetrameric homoleptic copper(I) ketimide complexes, [Cu(N=CR₂)]₄, where R = t-Bu or Ph. Mesityl copper reacted with excess 1-trimethylsilylmethyl-2,2,-dimethylhydrazine to give the mixed ligand complex (2,4,6-C₆Me₃H₂)Cu₄[N(SiMe₃)NMe₂]₃. Single-crystal X-ray crystallographic studies revealed that the three complexes have eight-member ring structures in which the ring has a hinged or butterfly shape. Although an eight-member ring structure is common for copper(I) amido, alkyl, and aryl clusters, the structure of [Cu(N=C-t-Bu₂)]₄ is unusual because the hinge angle is significantly smaller than is common, resulting in short Cu···Cu contacts compared to related complexes.     

A Directed Route to Colloidal Nanoparticle Synthesis of the Copper Selenophosphate Cu3PSe4

The first colloidal nanoparticle synthesis of the copper selenophosphate Cu₃PSe₄, a promising new material for photovoltaics, is reported. Because the formation of binary copper selenide impurities seemed to form more readily, two approaches were developed to install phosphorus bonds directly: 1) the synthesis of molecular P₄Se₃ and subsequent reaction with a copper precursor, (P‐Se)+Cu, and 2) the synthesis of copper phosphide, Cu₃P, nanoparticles and subsequent reaction with a selenium precursor, (Cu‐P)+Se. The isolation and purification of Cu₃P nanoparticles and subsequent selenization yielded phase‐pure Cu₃PSe₄. Solvent effects and Se precursor reactivities were elucidated and were key to understanding the final reaction conditions.     

Copper fluoride as a low-cost sodium-ion battery cathode with high capacity

Sodium-ion batteries（SIBs） are promising alternatives to lithium-ion batteries（LIBs） for large-scale energy storage considering the abundance and low cost of Na-containing resources. However, the energy density of SIBs has been limited by the typically low specific capacities of traditional intercalation-based cathodes. Metal fluorides, in contrast, can deliver much higher capacities based on multi-electron conversion reactions. Among metal fluorides, CuF₂ presents a theoretical speci...     

Mono‐ and dinuclear CuII complexes of the benzyldipicolylamine (BDPA) ligand: crystal structure,synthesis and characterization

The crystal structures of mono‐ and dinuclear Cu^II trifluoromethanesulfonate (triflate) complexes with benzyldipicolylamine (BDPA) are described. From equimolar amounts of Cu(triflate)₂ and BDPA, a water‐bound Cu^II mononuclear complex, aqua(benzyldipicolylamine‐κ³N ,N′ ,N ′′)bis(trifluoromethanesulfonato‐κO )copper(II) tetrahydrofuran monosolvate, [Cu(CF₃SO₃)₂(C₁₉H₁₉N₃)(H₂O)]·C₄H₈O, (I), and a triflate‐bridged Cu^II dinuclear complex, bis(μ‐trifluoromethanesulfonato‐κ²O :O ′)bis[(benzyldipicolylamine‐κ³N ,N′ ,N ′′)(trifluoromethanesulfonato‐κO )copper(II)], [Cu₂(CF₃SO₃)₄(C₁₉H₁₉N₃)₂], were synthesized. The presence of residual moisture in the reaction medium afforded water‐bound complex (I), whereas dinuclear complex (II) was synthesized from an anhydrous reaction medium. Single‐crystal X‐ray structure analysis reveals that the Cu^II centres adopt slightly distorted octahedral geometries in both complexes. The metal‐bound water molecule in (I) is involved in intermolecular O—H…O hydrogen bonds with triflate ligands and tetrahydrofuran solvent molecules. In (II), weak intermolecular C—H…F(triflate) and C—H…O(triflate) hydrogen bonds stabilize the crystal lattice. Complexes (I) and (II) were also characterized fully using FT–IR and UV–Vis spectroscopy, cyclic voltammetry and elemental analysis.     

Novel Copper(I) Clusters with 2‐(Diphenylphosphanyl)anilide Ligands. Synthesis and Crystal Structures of [Cu6X2(NHR)4] (X = Cl,Br, I; R = C6H4‐2‐PPh2)

Treatment of copper(I) halides CuX (X = Cl, Br, I) with lithium 2‐(diphenylphosphanyl)anilide [Li(HL)] in THF led to the formation of hexanuclear copper(I) complexes [Cu₆X₂(HL)₄] [X = Cl ( 1 ), Br ( 2 ), I ( 3 )]. In compounds 1 – 3 , the copper atoms are in a distorted octahedral arrangement and the amide ligands adopt a μ₃‐κP,κ²N bridging mode. Additionally there are two μ₂‐bridging halide ligands. Each of the [Cu₆X₂(HL)₄] clusters comprises two copper atoms, which are surrounded by two amide nitrogen atoms in an almost linear coordination [Cu–N: 186.2(3)–188.0(3) pm] and four copper atoms, which are connected to an amide N atom, a P atom, and a halogen atom in a distorted trigonal planar fashion [Cu–N: 199.6(3)–202.3(3) pm)].     

Relationship between the Auger parameter and the ground state valence charge of the core-ionized atom: The case of Cu(I) and Cu (II) compounds

We develop a simple semiempirical model that correlates the Auger parameter to the ground state valence charge of the core-ionized atom with closed shell electron configuration. Until now, the Auger parameter was employed to separate initial and final state effects that influence the core electron binding energy. The model is applied to Cu(I) and Cu (II) compounds with the Auger parameter defined as α' = E_b^FL (2p_3/2) + E_k^FL (L₃M₄₅M₄₅;¹G). The Auger parameter shift for Cu(I) ion in CuI, CuBr, CuFeS₂, Cu₂S, and Cu₂O compounds—with respect to the copper free atom—increases with the electronic polarizability of the nearest-neighbour ligands suggesting a nonlocal screening mechanism. This relaxation process is interpreted as due to an electron transfer from the nearest-neighbour ligands toward the spatially extended 4sp valence orbitals of the core-ionized Cu(I) ion. In agreement with our model, a linear relationship is found between the Auger parameter shift and the ground state Bader valence charge obtained by density functional theory calculations. The Auger parameter shift for the Cu (II) ion in CuF₂, CuCl₂, CuBr₂, CuSO₄, Cu (NO₃)₂•3H₂O, Cu₃(PO₄)₂, Cu (OH)₂, and CuO compounds is very close to the Auger parameter of metallic copper, and therefore, it is not related to the calculated ground state Bader valence charge. The relaxation process in the final state is dominated by the local screening mechanism, which involves an electron transfer from the nearest-neighbour ligands toward the spatially contracted 3d orbitals of the core-ionized Cu (II) ion.     

Post-Nickelation of a Crystalline Trinuclear Copper Organic Framework for Synergistic Photocatalytic Carbon Dioxide Conversion

Rational regulation of electronic structures and functionalities of framework materials still remains challenging. Herein, reaction of 4,4′,4′′-nitrilo-tribenzhydrazide with tris(μ₂-4-carboxaldehyde-pyrazolato-N,N′)-tricopper (Cu₃Py₃) generates the crystalline copper organic framework USTB-11(Cu). Post-modification with divalent nickel ions affords the heterometallic framework USTB-11(Cu,Ni). Powder X-ray diffraction and theoretical simulations reveal their two-dimensional hexagonal structure geometry. A series of advanced spectroscopic techniques disclose the mixed Cu^I/Cu^II state nature of Cu₃Py₃ in USTB-11(Cu,Ni) with a uniform bistable Cu₃⁴⁺(Cu^I₂Cu^II) : Cu₃⁵⁺(Cu^ICu^II₂) (ca. 1 : 3) oxidation state, resulting in a significantly improved formation efficiency of the charge-separation state. This endows the Ni sites with enhanced activity and USTB-11(Cu,Ni) with outstanding photocatalytic CO₂ to CO performance with a conversion rate of 22 130 μmol g⁻¹ h⁻¹ and selectivity of 98 %.     

Synthesis, Characterization and Properties of a Novel Cationic Hexanuclear Cyclic Guanidinate Copper(I) Cluster of High Solubility in Non-polar Solvents

The reaction of copper(I) tetra-acetonitrile hexaflourophosphate with LiTEhpp (the lithium salt of 3,3,7,7-tetraethyl-1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-??)pyrimidine) at low temperature (?80?°C) in THF under Schlenk conditions, produces a cluster salt tetrakis(3,3,9,9-tetraethyl-1,5,7-triazabicyclo[4.4.0]dec-4ene)bis(hexafluorophosphate)-hexa-copper(I), [Cu₆(TEhpp)₄)](PF₆)₂(1). The cation is composed of an octahedral core of six copper(I) with four TEhpp ligands, each in a tri-coordinating fashion through two N atoms. This compound shows strong luminescent properties at liquid nitrogen temperature and is soluble in non-polar solvents such as toluene and hexane. The synthesis, spectroscopic properties and crystal structure are presented and discussed. The use of CuCl for the reaction with LiTEhpp yields a solution from which, in the presence of water, two mononuclear copper structures are produced in low yield, [Cu(II){(??-O-(HTEhpp)₂}₂Cl][Cu(I)Cl₂], 2, and Cu (TEhpp)₂Cl, 3.     

π‐Complexes of Copper(I) with Terminal Alkynes. Synthesis and Crystal Structure of [(HC≡CCH2NH3)(Cu2Br3)] π‐Complex

Crystals of the zwitterionic copper(I) π‐complex [(HC≡CCH₂NH₃)Cu₂Br₃] have been synthesized by interaction of CuBr with [HC≡CCH₂NH₃]Br in aqueous solution (pH < 1) and X‐ray studied. The crystals are monoclinic: space group P2₁/n, a = 6.722(4), b = 12.818(8), c = 9.907(3) Å, β = 100.25(4)°, V = 840.0(8) ų, Z = 4, R = 0.0592 for 3015 reflections. The crystal structure of the π‐complex contains isolated [(HC≡CCH₂NH₃)⁺(Cu₂Br₃)^?]₂ units which are incorporated into a framework by strong hydrogen N–H···Br and C≡C–H···Br bonds. The length of π‐coordinated propargylammonium C≡C bond is equal 1.216(8) Å and Cu(I)–(C≡C) distance equals 1.958(5) Å.     

Copper(I) Complexes of Bithiazoles

Several new copper(I) complexes of a group of bidentate bithiazole ligands have been isolated. The compounds prepared are bis(2,2′-dimethyl-4,4′-bithiazole)copper(I) perchlorate ([Cu(me-b)₂]ClO₄), bis(4,4′-dimethyl-2,2′-bithiazole)copper(I) perchlorate ([Cu(me-i)₂]ClO₄), bis(2,2′-diphenyl-4,4′-bithiazole) copper(I) perchlorate ([Cu(ph-b)₂]ClO₄), bis(4,4′-diphenyl-2,2′-bithiazole)copper(I) perchlorate ([Cu(ph-i)₂]ClO₄), bis(4,4′,5,5′-tetraphenyl-2,2′-bithiazole)-copper(I) perchlorate ([Cu(ph₄-i)₂]ClO₄, bis(2,2′-bithiazole)copper(l) perchlorate ([Cu(i)₂]CIO₄), 2,2′-bithiazolecopper(I) perchlorate ([Cu(i)ClO₄), (2,2′-bithiazole)bis(triphenylphosphinesulfide)copper(I) perchlorate ([Cu(i)(SPph₃)₂]ClO₄,(2,2′-bithiazole)bis-( triphenylphosphine)copper(I) perchlorate ([Cu(i)(Pph₃)₂]ClO₄), and (4,4′-bithiazole)bis(triphenylphosphine) copper(I) perchlorate ([Cu(b)(Pph₃)₂]ClO₄). Several synthetic techniques were required including one developed in this work which involved the conversion of [Cu(Pph₃)₄]ClO₄ into the thiophosphine complex by reaction with sulfur and subsequent use of this as a labile precursor complex. Optical spectra of the complexes indicate extensive solution dissociation. Several of the complexes ([Cu(ph-b)₂]ClO₄, [Cu(ph-i)₂]CIO₄, and [Cu(i)(Pph₃]ClO₄) were photoluminescent in the solid; one ([Cu(ph-b)₂]ClO₄) showed extensive loss of emission during irradiation. Most of the complexes prepared here appear to bind through the thiazole nitrogen atoms. However, infrared evidence suggests that in two of the complexes thiazole sulfur atoms participate in the bonding.     

Hydroxylammonium fluorometalates: Synthesis and characterisation of a new fluorocuprate and fluorocobaltate

The first layered hydroxylammonium fluorometalates, (NH₃OH)₂CuF₄ and (NH₃OH)₂CoF₄, were prepared by the reaction of solid NH₃OHF and the aqueous solution of copper or cobalt in HF. Both compounds crystallize in monoclinic, P2₁/c, unit cell with parameters: a = 7.9617(2) Å, b = 5.9527(2) Å, c = 5.8060(2) Å, β = 95.226(2)° for (NH₃OH)₂CuF₄ and a = 8.1764(3) Å, b = 5.8571(2) Å, c = 5.6662(2) Å, β = 94.675(3)° for (NH₃OH)₂CoF₄, respectively. Magnetic susceptibility was measured between 2 K and 300 K giving the effective Bohr magneton number of 2.1 for Cu and 5.2 BM for Co. At low temperatures both complexes undergo a transition to magnetically ordered phase. The thermal decomposition of both compounds was studied by TG, DSC and X-ray powder diffraction. The thermal decomposition of (NH₃OH)₂CuF₄ is a complex process, yielding NH₄CuF₃ as an intermediate product and impure Cu₂O as the final residue, while (NH₃OH)₂CoF₄ decomposes in two steps, obtaining CoF₂ after the first step and CoO as the final product.     

Copper(II) coordination chemistry of 2-methyl-2-(2-pyridyl)-1,3-propan-diol: Syntheses and structures of mono-, di-, and tricopper complexes

Six copper(II) complexes with N,O-donor ligand 2-methyl-2-(2-pyridyl)-1,3-propan-diol (H₂ppdo) were synthesized and characterized. Treatment of CuCl₂ or Cu(OTf)₂ with H₂ppdo led to the formation of bis(H₂ppdo) monomers [Cu(H₂ppdo)₂][CuCl₄] (1) and [Cu(H₂ppdo)₂](OTf)₂ (2), respectively. Both 1 and 2 are comprised of the copper atom coordinated by two ligands in an axially-compressed tetragonal geometry with the pyridyl N atoms in the axial positions and the alcohol O atoms in the equatorial plane. The treatment of 1 or 2 with Et₃N produced copper(II) complexes of varying nuclearity. Treatment of 1 with excess Et₃N generated two binuclear Cu(II) clusters [Cu₂(Hppdo)₂Cl₂] (3) and [Cu₂(Hppdo)₂Cl₂(CH₃OH)₂] (4), where only one alcohol OH group per ligand has been deprotonated, while similar treatment of 2 with excess Et₃N afforded the trimeric copper(II) species [Cu₃(Hppdo)₄](OTf)₂ (5). The structures of 3 and 4 are similar, with alkoxo-O ligand atoms bridging between two square pyramidal copper atoms, and the alcohol-O ligand atoms either coordinating in the axial position in 3, or uncoordinated in 4. Treatment of CuCl₂ with H₂ppdo and Et₃N afforded the trinuclear Cu(II) complex, [Cu₃(Hppdo)₄]Cl₂ (6). Complexes 5 and 6 are made up of one square-planar copper sandwiched between two tetragonally distorted six-coordinate Cu(Hppdo)₂ moieties, where the bridging alkoxo-O atoms link the copper atoms.     

Synthetic and Structural Studies on Copper 1 H‐[1,10]‐Phenanthrolin‐2‐one Coordination Complexes: Isolation of a Novel Intermediate During 1,10‐Phenanthroline Hydroxylation

The synthesis and crystal structure elucidation of a novel dinuclear heteroleptic copper(II) complex has led to an alternative mechanism in the formation of covalent hydrates. During further studies on the synthesis and properties of [Cu₂(ophen)₂] ( 1 ), a dinuclear complex of copper(I) with 1 H‐[1,10]‐phenanthrolin‐2‐one (Hophen), two intermediates/alternative products 2 and 3 were isolated. The dinuclear, antiferromagnetic complex [Cu₂(ophen)₂(phen)₂] ? (NO₃)₂ ? 9H₂O ( 3 , phen=1,10‐phenanthroline) contains two five‐coordinate copper(II) ions, both with trigonal‐bipyramidal coordination, which are bridged together through deprotonated hydroxyl groups with a Cu? Cu non‐bonding distance of 3.100 Å. Complex [Cu(phen)₂(H₂O)] ? (NO₃)₂ ( 2 ) is a polymorph of a previously reported material. The occurrence of 2 and 3 has led us to propose a variation to the Gillard mechanism for the formation of covalent hydrates in bidentate N‐heterocycles in which the attacking nucleophile may be the deprotonated form of 2 , [Cu(phen)₂(OH)]^?, rather than free OH^?.     

Electrochemiluminescence of Supramolecular Nanorods and Their Application in the “On–Off–On” Detection of Copper Ions

In this work, an “on–off–on” switch system has been successfully applied through the construction of an electrochemiluminscent biosensor for copper ion (Cu²⁺) detection based on a new electrochemiluminescence (ECL) emitter of supramolecular nanorods, which was achieved through supramolecular interactions between 3,4,9,10‐perylenetetracarboxylic acid (PTCA) and aniline. The initial “signal‐on” state with strong and stable ECL emission was obtained by use of the supramolecular nanorods with a new signal amplification strategy involving a co‐reaction accelerator. In addition, ECL quencher probes (Fc‐NH₂/Cu‐Sub/nano‐Au) were fabricated by immobilizing aminoferrocene (Fc‐NH₂) on Cu‐substrate strand modified Au nanoparticles. The quencher probes were hybridized with the immobilized Cu‐enzyme strand to form Cu²⁺‐specific DNAzyme. Similarly, the “signal‐off” state was obtained by the high quenching effect of Fc‐NH₂ on the ECL of the excited‐state PTCA (¹PTCA*). As expected, the second “switch‐on” state could achieved by incubating with the target Cu²⁺, owing to the Cu²⁺‐specific DNAzyme, which was irreversibly cleaved, resulting in the release of the quencher probes from the sensor interface. Herein, on the basis of the ECL intensity changes (ΔI_ECL) before and after incubating with the target Cu²⁺, the prepared Cu²⁺‐specific DNAzyme‐based biosensor was used for the determination of Cu²⁺ concentrations with high sensitivity, excellent selectivity, and good regeneration.     

Copper(I) and copper(II) complexes of an ethylene cross‐bridged cyclam

The preparation and crystal structures of (4,11‐di­benzyl‐1,4,8,11‐tetra­aza­bi­cyclo­[6.6.2]­hexa­decane‐κ⁴N)copper(I) hexa‐fluorophosphate, [Cu(C₂₆H₃₈N₄)]PF₆, and acetonitrile(4,11‐dibenzyl‐1,4,8,11‐tetraazabicyclo[6.6.2]hexadecane‐κ⁴N)‐copper(II) bis(hexafluorophosphate), [Cu(C₂H₃N)(C₂₆H₃₈‐N₄)](PF₆)₂, are described. The Cu^I ion is tetracoordinated in a very distorted tetrahedron, while the Cu^II analogue is pentacoordinated in a square pyramid.     

First Dinuclear Copper/Gallium Complexes: Supporting Cu0 and CuI Centres by Low‐Valent Organogallium Ligands

The synthesis and structural characterisation of low‐valent dinuclear copper(I) and copper(0) complexes supported by organogallium ligands has been accomplished for the first time by the reductive coordination reaction of [GaCp*] (Cp*=pentamethylcyclopentadienyl) and [Ga(ddp)] (ddp=HC(CMeNC₆H₃‐2,6‐iPr₂)₂ 2‐diisopropylphenylamino‐4‐diisopropylphenylimino‐2‐pentene) with readily available copper(II) and copper(I) precursors. The treatment of CuBr₂ and Cu(OTf)₂ (OTf=CF₃SO₃) with [Ga(ddp)] under mild conditions resulted in elimination of [Ga(L)₂(ddp)] (L=Br, OTf) and afforded the novel gallium(I)/copper(I) compounds [{(ddp)GaCu(L)}₂] (L=Br ( 1 ), OTf ( 2 )). The single‐crystal X‐ray structure determinations of 1 and 2 reveal that these molecules are composed of {(ddp)GaCu(L)} dimeric units, with planar Cu^I? Ga^I four‐membered rings and short Cu^I???Cu^I distances, with 2 exhibiting the shortest Cu^I???Cu^I contact reported to date of 2.277(3) Å. The all‐gallium coordinated dinuclear [Cu₂(GaCp*)(μ‐GaCp*)₃Ga(OTf)₃] ( 3 ) is formed when Cu(OTf)₂ is combined with [GaCp*] instead of [Ga(ddp)]. Notably, in the course of this redox reaction Lewis acidic Ga(OTf)₃ is formed, which coordinates to one of the electron‐rich copper(0) centres. Compound 3 is suggested as the first case of a structurally characterised complex of copper(0). By changing the copper(II) to a copper(I) source, that is, [Cu(cod)₂][OTf] (cod=1,5‐cyclooctadiene), the salt [Cu₂(GaCp*)₃(μ‐GaCp*)₂][OTf]₂ ( 4 ) is formed, the cationic part of which is related to previously described isoelectronic dinuclear d¹⁰ complexes of the type [M₂(GaCp*)₅] (M=Pd, Pt).     

Solution Characteristics for Adsorption of Copper Ion with Iron(III) Hydroxide from Aqueous Ammonia Solution

The distribution of copper ion species in aqueous ammonia solution is evaluated as a function of pH by a numerical approach. Adsorption of copper on colloidal iron(III) hydroxide in solutions of total ammonia (0.14-1.2 M) are performed at various values of pH. The maximum efficiency of adsorption occurs when the sum of the fractions of the species Cu(NH₃)²⁺, Cu(NH₃)₂²⁺ and Cu(NH₃)₃²⁺ in the solution reaches its maximum. With varied solution pH, the distribution of copper species is the determining factor for maximum adsorption, whereas the surface properties of the adsorbing particles show smaller effects under the test conditions.     

In Situ Generation of ArCu from CuF2 Makes Coupling of Bulky Aryl Silanes Feasible and Highly Efficient

A bimetallic system of Pd/CuF₂, catalytic in Pd and stoichiometric in Cu, is very efficient and selective for the coupling of fairly hindered aryl silanes with aryl, anisyl, phenylaldehyde, p‐cyanophenyl, p‐nitrophenyl, or pyridyl iodides of conventional size. The reaction involves the activation of the silane by Cu^II, followed by disproportionation and transmetalation from the Cu^I(aryl) to Pd^II, upon which coupling takes place. Cu^III formed during disproportionation is reduced to Cu^I(aryl) by excess aryl silane, so that the CuF₂ system is fully converted into Cu^I(aryl) and used in the coupling. Moreover, no extra source of fluoride is needed. Interesting size selectivity towards coupling is found in competitive reactions of hindered aryl silanes. Easily accessible [PdCl₂(IDM)(AsPh₃)] (IDM = 1,3‐dimethylimidazol‐2‐ylidene) is by far the best catalyst, and the isolated products are essentially free from As or Pd (<1 ppm). The mechanistic aspects of the process have been experimentally examined and discussed.