二乙基二烯丙基氯化铵均聚及其与丙烯酰胺或丙烯酸共聚动力学研究

采用膨胀计法研究了以过硫酸铵为引发剂,二乙基二烯丙基氯化铵(DEDAAC)在水溶液中的均聚及其与丙烯酰胺(AM)和丙烯酸(AA)共聚动力学,测定了相应的聚合表观活化能;采用元素分析法测定了DEDAAC分别与AM和AA在低转化率下共聚物的组成,并采用氯离子选择性电极法测定了DEDAAC-AM共聚物中的氯离子含量,按Kelen-Tudos方法求得了相应的竞聚率.结果表明,DEDAAC均聚速率方程为RP=k[M]0.99[I]0.76,表观活化能Ea=77.00kJ/mol,说明链终止为单基终止和双基终止并存,引发过程与单体浓度无关;DEDAAC与AM在摩尔比为4∶1时,共聚动力学方程为RP=[M]2.53[I]0.90,表观活化能Ea=67.06kJ/mol,单体竞聚率为rDE=0.31±0.02、rAM=5.27±0.53;DEDAAC与AA在摩尔比为4∶1时,共聚动力学方程为RP=k[M]2.94[I]0.83,表观活化能Ea=70.07kJ/mol,竞聚率为rDE=0.28±0.03、rAA=5.15±0.28;DEDAAC与AM和AA等共聚为非理想共聚,得到的产物均为无规共聚物.     

DMDAAC/IA共聚动力学研究

采用膨胀计法研究了过硫酸钾-亚硫酸氢钠为氧化还原引发剂引发的二甲基二烯丙基氯化铵和衣康酸的水溶液共聚合动力学,测定了共聚合速率方程和表观活化能,用红外光谱和凝胶渗透色谱对共聚物进行了表征。共聚合热力学计算表明,在温度T=303~333K的试验条件范围,共聚合的活化能变化⊿G0。研究结果表明,二甲基二烯丙基氯化铵和衣康酸共聚合速率方程为Rp∝[M]1.49[I]0.53,共聚合表观活化能Ea=54.11kJ/mol。     

丙烯酰胺与二甲基二烯丙基氯化铵共聚动力学

采用膨胀计法研究了以过硫酸铵 亚硫酸氢钠为引发剂,丙烯酰胺（AM）和二甲基二烯丙基氯化铵（DMDAAC）在水溶液中的共聚反应动力学,测定了相应的聚合表观活化能、聚合速率方程和单体竞聚率。 结果表明,当AM与DMDAAC摩尔比分别为5∶5、6∶4和7∶3时,表观活化能分别为Ea1=90.61 kJ/mol、Ea2=88.88 kJ/mol和Ea3=85.15 kJ/mol;聚合反应温度为45 ℃下,聚合速率方程分别为Rp1=kc(M)2.84c(IO)0.51·c(IR)0.61,Rp2=kc(M)2.77c(IO)0.51c(IR)0.59和Rp3=kc(M)2.73c(IO)0.50c(IR)0.56;2种单体的竞聚率分别为rAM=6.11,rDMDAAC=0.14。 上述实验结果可从动力学角度为不同阳离子度共聚物Poly(DMDAAC-co-AM)（PDA）聚合反应速率差别及产物特征黏度值差异进行解释。     

对苯乙烯磺酸钠聚合动力学及与丙烯酰胺共聚合的研究

采用膨胀计法研究了对苯乙烯磺酸钠(SSS)在水溶液中聚合动力学,确定了聚合速率方程,测定了聚合表观活化能,并研究了对苯乙烯磺酸钠与丙烯酰胺(AM )在水溶液中共聚合的动力学行为,利用聚电解质———共聚物P(SSS -co -AM)与阳离子表面活性剂N ,N ,N- 三甲基十六烷基溴化铵(CTAB)的复合作用,采用电导滴定法测定了共聚物的组成,从而测得了对苯乙烯磺酸钠与丙烯酰胺的竞聚率.研究结果表明,对苯乙烯磺酸钠聚合速率方程为RP =K[M]1 .0 [I]0 .53,说明链终止为双基终止方式,引发过程与单体浓度无关;聚合表观活化能为84 . 96kJ·mol- 1 ;采用Kelen Tudos方法,求得对苯乙烯磺酸钠(SSS)和丙烯酰胺(AM)两单体的竞聚率分别为rSSS =0 . 2 7,rAM =2 . 2 1;采用Alfrey Price经验规则估算了单体苯乙烯磺酸钠的Q、e值为QSSS=0 .2 2 ,eSSS=0 .4 6 .     

表面活性单体DMBAC光聚合动力学研究

采用偶氮二异丁脒盐酸盐(AIBA)作为光引发剂,光引发聚合并研究了阳离子表面活性单体——甲基丙烯酰氧乙基二甲基苄基氯化铵(DMBAC)的均聚及其与丙烯酰胺(AM)共聚合反应的动力学行为,聚合反应均在高于DMBAC临界胶束浓度(CMC)的条件下进行.研究结果显示DMBAC均聚合反应速率与引发剂浓度的0.29次方以及单体浓度的0.89次方成正比,均聚合反应的表观活化能约为13.74 kJ/mo1;DMBAC与AM共聚合反应速率与引发剂浓度的0.82次方以及单体总浓度的0.83次方成正比,共聚合反应的表观活化能约为10.97 kJ/mo1;同时测得DMBAC与AM共聚合反应的单体竞聚率为r₁=0.27(AM)、r₂=2.00(DMBAC),说明AM趋向于形成共聚物,而DMBAC更趋向于形成均聚物.     

表面活性单体AMC14AB在水溶液中的聚合动力学研究

采用溴酸钾-溴化钾法研究了阳离子型表面活性单体(2-丙烯酰胺基)乙基十四烷基二甲基溴化铵(AMC14AB)在水溶液中的聚合动力学,分别考察了引发剂浓度与单体浓度对聚合速率的影响,确定了聚合速率方程,分析了聚合机理,考察了温度对聚合反应的影响,测定了聚合表观活化能。研究结果表明,由于AMC14AB在水溶液中的胶束化行为,使其具有较快的聚合速率,于60℃下聚合,40min内转化率即可达到80%以上;AMC14AB的聚合速率方程为Rp=k[M]0.92[I]0.48,说明链终止为双基终止方式,引发过程与单体无关;聚合表观活化能为80.72kJ/mol。     

(2-甲基丙烯酰氧乙基)三甲基氯化铵-丙烯酰胺双水相共聚合

将(2-甲基丙烯酰氧乙基)三甲基氯化铵(DMMC)与丙烯酰胺(AM)在聚乙二醇(PEG)水溶液中进行双水相共聚合(ATPC),并与DMMC/AM均相水溶液共聚合(HASC)进行比较.在均相水溶液共聚合体系中得到了DMMC/AM共聚体系的竞聚率分别为rDMMC=1.77、rAM=0.32,并给出了竞聚率的95%,99%联合置信区域.比较了两种共聚合体系的转化率-时间曲线和共聚组成,表明双水相共聚合体系初期反应速率高于均相水溶液共聚合体系,但最终转化率相似;两种共聚合体系得到的共聚物组成有较大差别.测得了DMMC、AM以及DMMC-AM共聚物(CPAM)在65℃、反应条件下的相分配系数为K1=0.035、K2=0.125和Kp=0.011.结合双水相聚合的本质以及单体和共聚物在两相的分配系数,提出了一个计算双水相共聚组成的新方法,用该方法计算的双水相共聚合体系的共聚组成与实验点吻合较好.     

阳离子型共聚物AM/DMBAC疏水微嵌段结构的分析

利用表面张力法对甲基丙烯酰氧乙基二甲基苄基氯化铵(简称DMBAC)在水溶液中的表面活性进行了测试并确定了其CMC值.研究了丙烯酰胺(AM)和DMBAC在水溶液中的共聚合反应行为,测定了AM与DMBAC共聚反应的竞聚率;IR,1H-NMR对共聚物的结构进行了表征;13C-NMR和DSC分析了单体DMBAC浓度对共聚产物微结构的影响;芘作为荧光探针测定了共聚物水溶液的疏水缔合性质.实验结果表明当共聚单体DMBAC浓度大于CMC时DMBAC倾向于均聚,DMBAC在共聚产物主链上呈微嵌段的形式分布.当共聚单体DMBAC浓度小于CMC时,DMBAC与AM倾向于无规共聚.     

EHP引发AM/DMMC反相微乳液聚合的研究

以油酸失水山梨醇酯Span80和壬基酚聚氧乙烯醚OP-10为乳化剂，白油为连续介质，过氧化二碳酸（2-乙基已酯）（EHP）为引发剂，进行丙烯酰胺/（2-甲基丙烯酰氧乙基）三甲基氯化铵（AM/DMMC）反相微乳液共聚合反应。研究了ωM=0.25-0.50范围内单体总浓度[M]、引发剂浓度[I]、乳化剂浓度[E]对聚合速率Rp和共聚物分子量M^-V的影响，得到Rp∝[M]^2.47[I]^0.76[E]^0.19,M^-v∝[M]^2.05[I]^-0.37[E]^-0.47。测定了AM/DMMC反相微乳液共聚合中单体的竞聚率，得到rAM=0.44,rDMMC=1.31。     

AM-DMDAAC共聚物的合成

研究了丙烯酰胺(AM)与阳离子单体二甲基二烯丙基氯化铵(DMDAAC)的水溶液聚合，考察了引发剂用量、单体总浓度，pH值，n(AM)：n(DMDAAC)对聚合物阳离子度和特性粘度的影响。并对产物进行了IR和热分析。     

Topotactic Solid-State Polymerization of Acenaphtylene by Radiation

ABSTRACT

The radiation-induced solid-state polymerization of acenaphthylene was carried out under vacuum at room temperature. The monomer and obtained polymer samples were investigated by UV, FTIR, DSC, TG, and powder X-ray diffraction methods to characterize the polymer and elucidate the polymerization mechanism. The polymer samples were crystalline with melting points ranging in 380-390°C interval. Polymerization takes place through vinyl groups by a radical mechanism and crystal structure of monomer and polymer studied by powder X-ray diffraction were quite similar. The space group for both were P22 ₁ 2 and cell parameters: a = 784.2 (6), b = 798.1(6), c = 1417.0(1) pm for monomer, and a = 791.7(8), b = 803.8(7), c =1431.0(1) pm for polymer. The similarity of crystal structures shows a topotactic polymerization of monomer.     

Trends in Radiation Polymerization

Previously it was generally assumed that high energy radiation could only initiate radical polymerization in solutions of monomers. However, examples of radiation-induced polymerization have recently become known that proceed via an ionic mechanism. Thus, solutions of a monomer can be polymerized ionically, preferably in the presence of a solid, at low temperatures. Suprisingly, this may also be accomplished with ultra-pure, mainly anhydrous systems, even at room temperature. The nature of the ions has not yet been fully elucidated.     

Mechanism-Guided Design of Chain-Growth Click Polymerization Based on a Thiol-Michael Reaction

The development of chain-growth click polymerization is challenging yet desirable in modern polymer chemistry. In this work, we reported a novel chain-growth click polymerization based on the thiol-Michael reaction. This polymerization could be performed efficiently under ambient conditions and spatiotemporally regulated by ultraviolet light, allowing the synthesis of sulfur-containing polymers in excellent yields and high molecular weights. Density functional theory calculations indicated that the thiolate addition to the Michael acceptor is the rate-determining step, and introducing the phenyl group could facilitate the chain-growth process. This polymerization is a new type of chain-growth click polymerization, which will provide a unique approach to creating functional polymers.     

浅谈自由基聚合动力学的教学与学习

自由基聚合动力学是高分子化学教学和学习中的重要内容。本文讨论了建立自由基聚合微观动力学模型的三个简化条件和三个基本假设,三个简化条件和三个基本假设是微观动力学研究聚合速率和聚合度的基础;同时也较为深入地探讨了动力学链长的物理意义、利用动力学链长概念建立起来的平均聚合度计算通用公式以及该公式的使用条件。     

The Highly Controlled and Efficient Polymerization of Ethylene

The highly controlled and efficient polymerization of ethylene is a very attractive but challenging target. Herein we report on a Coordinative Chain Transfer Polymerization catalyst, which combines a high degree of control and very high activity in ethylene oligo- or polymerization with extremely high chain transfer agent (triethylaluminum) to catalyst ratios (catalyst economy). Our Zr catalyst is long living and temperature stable. The chain length of the polyethylene products increases over time under constant ethylene feed or until a certain volume of ethylene is completely consumed to reach the expected molecular weight. Very high activities are observed if the catalyst elongates 60 000 or more alkyl chains and the polydispersity of the strictly linear polyethylene materials obtained are very low. The key for the combination of high control and efficiency seems to be a catalyst stabilized by only one strongly bound monoanionic N-ligand.     

MONOMETALLIC SOLVENT STABILIZED TRANSITION METAL CATIONS AS INITIATORS FOR CYCLOPENTADIENE POLYMERIZATION

Several mononuclear transition metal cations stabilized by acetonitrile molecules act as initiators for the polymerization of cyclopentadiene. The highest yield is reached with Cr, Mn, Fe, and Zn complexes, all of them in the oxidation state +II. The analogous V and Ni complexes, however, are completely or nearly inactive. In general, the observed activity of the examined monomeric complexes correlates well with the ligand field stabilization energy as a function of the number of d electrons for octahedrally coordinated transition metals in the oxidation state +II. The counter ions have a pronounced influence on the catalytic activity: the less coordinating they are, the higher is the activity of the cations. The reaction temperature also has a significant influence: above 50°C the complex activity is on decline, possibly due to initiator decomposition or com-petitive inhibition by dicyclopentadiene.     

Mechanistic Insight into Anion-Binding Catalytic Living Cationic Polymerization

Exploiting non-covalent interactions to catalyze challenging ionic polymerizations is an ambitious goal but is in its infancy. We recently demonstrated non-covalent anion-binding catalysis as an effective methodology to enable living cationic polymerization (LCP) of vinyl ethers in an environmentally benign manner. Here, we further elucidate the structure-reactivity relationships of the elaborately designed seleno-cyclodiphosph(V)azanes catalysts and the roles of anion-binding interactions by a combined theoretical DFT study and experimental study. The investigation suggests that the distinct cis-cyclodiphosph(V)azane framework combined with “selenium effect” and electron-withdrawing 3,5-(CF₃)₂-Phenyl substitution pattern in catalyst enables a critical contribution to accessing excellent stability, anion affinity and solubility under polymerization conditions. Thus, the catalyst could leverage anion-binding interactions to precisely control reversible and transient dormant-active species equilibrium, allowing it to dynamically bind, recognize and pre-organize propagating ionic species and monomer, thereby facilitating efficient chain propagation and minimizing irreversible chain transfer events under mild conditions. The more in-depth understanding of the mechanism for anion-binding catalytic LCP reported herein should help to guide future catalyst design and to extend this concept to broader polymerization systems where ionic species serve as crucial intermediates.     

工业丙烯聚合过程的模型化研究进展

基于我国聚丙烯生产状况,指出我国在聚丙烯合成技术上的研究缺陷.针对国内缺陷并遵循"聚丙烯合成过程模型化"主线,本文从聚丙烯生产工艺、丙烯聚合机理、丙烯聚合动力学以及聚合反应器模型四方面对丙烯聚合过程模型化的近期研究进展进行综述,重点简述我国科研工作者在相关方面的研究进展.     

嵌段共聚物在乳液聚合和分散聚合中的应用

综述了嵌段共聚物在乳液聚合和分散聚合中作为稳定剂应用的进展，主要讨论了共聚物化学组成，比例，分子量，浓度以及胶束形成等因素对聚合体系的影响。     

New Ring-Opening Polymerization of Phosphorus-Containing Cyclic Monomers

A living cationic ring-opening polymerization of a six-membered cyclic phosphonite initiated with a new catalyst system of a halobenzene with NiBr 2 is disclosed. Furthermore, we report a cationic ring-opening polymerization of a three-membered cyclic phosphine, giving rise directly to the polyphosphine derivative.