共查询到20条相似文献,搜索用时 93 毫秒
1.
酚醛树脂/蒙脱土纳米复合材料的制备及固化反应动力学研究 总被引:23,自引:0,他引:23
利用自制的有机蒙脱土 ,采用浇模固化成型法制备酚醛树脂 /六次甲基四胺 /蒙脱土纳米复合材料 ,并用XRD观察有机蒙脱土分别在热塑性和热固性酚醛树脂中复合行为 .研究发现 ,由于两种树脂的固化反应机理不同 ,热固性酚醛树脂与蒙脱土复合 ,可得插层型纳米复合材料 ;而采用热塑性酚醛树脂进行固化 ,则得到部分剥离的纳米复合材料 .通过DSC进一步研究热塑性酚醛树脂 /蒙脱土复合体系的固化反应动力学 .运用Kissinger ,Flynn Wall Ozawa ,Crane方法求出活化能和反应级数等动力学参数 .结果发现 ,加入蒙脱土使固化反应活化能下降 ,反应级数减小 ,从而有利于固化工艺的实现 ,便于纳米复合材料实际应用 . 相似文献
2.
提出采用三组份改性酚醛树脂和混杂纤维冷压工艺制备离合器摩擦材料.三组份酚醛树脂为硼改性腰果壳油液体树脂、三聚氰胺改性酚醛液体树脂和芳烷基改性酚醛固体树脂.混杂纤维由玻璃纤维和复合包芯纱混杂构成.结果表明,采用三组份酚醛树脂和混杂纤维可以制备出摩擦性能良好,350℃不发生热衰退的离合器摩擦材料,且材料具有合适的孔隙率. 相似文献
3.
静电纺丝是一种简单有效的制备聚合物纳米纤维的技术,在组织工程、药物控释和传感器等方面具有广泛的应用。采用静电纺丝技术制备得到的纳米纤维膜具有比表面积大、孔隙率高和易于分离回收等优点,可以作为一种优良的酶固定化载体,目前在酶固定化领域受到了广泛的关注。本文综述了近年来静电纺丝纳米纤维膜固定化酶的研究进展,在阐述静电纺丝纳米纤维膜制备技术的基础上,详细介绍了纳米纤维膜表面担载法和包埋法固定化酶的原理和方法,分析了不同固定化方法的优缺点,并讨论了静电纺丝纳米纤维膜固定化酶的应用前景,对静电纺丝纳米纤维膜固定化酶的发展方向进行了展望。 相似文献
4.
纤维素是一种天然存在于有机物或植物中储量巨大的可再生资源。醋酸纤维素是在催化剂的作用下,将纤维素的羟基酯化而得到的一种热塑性树脂。由于其具有稳定,易于加工,不易燃烧,生物可降解性等特点,常用来替代天然纤维素作为静电纺丝的原料。静电纺丝技术作为目前制备纳米纤维材料的一种简单有效的方法,近些年来一直备受关注。本文系统介绍了以醋酸纤维素为静电纺丝的基体材料, 通过添加纳米粒子、聚合物溶液、表面改性、同轴电纺等物理改性方法以及再生纤维处理和硝化反应等化学改性方法制备改性醋酸纤维素纤维, 讨论了改性后的新材料结构和性能等多方面的变化。综述了近几年来国内外关于以静电纺丝法制备改性醋酸纤维素纤维的研究进展以及其在生物医药、组织工程支架、过滤膜以及功能性织物等方面的应用前景。 相似文献
5.
6.
7.
纤维素纳米纤维很好的结合了纤维素的重要属性和纳米材料的各项特性,但纤维素大分子之间存在大量氢键,使得纤维素较难溶于普通溶剂,导致通过静电纺丝法直接制备纤维素纳米纤维具有一定的难度.而先采用静电纺丝法制备纤维素衍生物纳米纤维,再对纤维素衍生物纳米纤维进行水解也是制备纤维素纳米纤维的一种有效方法.本文对近年来这两种纤维素纳米纤维制备方法的研究进行了综述,并对静电纺制备纤维素纳米纤维的发展前景做出了展望. 相似文献
8.
核/壳结构纳米纤维是一种兼具核层与壳层优异性能的功能化复合纤维, 通常具有优于核层和壳层自身的性能, 如可控的机械强度和较好的热传导系数等。其特殊的结构极大地提高了纤维的使用价值, 拓宽了纤维的应用领域, 因此, 核/壳结构纳米纤维成为纤维领域的研究热点之一。静电纺丝技术因其简单有效的特点, 近些年来在众多纳米纤维制备技术中一直备受关注, 制备结构和形貌可控的核/壳结构纤维的方法对于指导其在实际中的应用尤为重要。本文系统介绍了以静电纺丝技术制备核/壳结构纳米纤维的方法, 主要包括单喷头相分离法、同轴静电纺丝法、乳液静电纺丝法以及模板法, 重点讨论了影响核/壳结构的主要因素以及核/壳结构对纤维性能的影响。综述了近几年来国内外关于可控核/壳结构电纺纤维制备的研究新进展及其在药物缓释体系、组织工程支架、多功能敷料、污水处理材料、疏水性材料等领域的潜在应用价值。 相似文献
9.
10.
用红外光谱法对热固性酚醛树脂固化过程的研究 总被引:4,自引:0,他引:4
用红外光谱法研究了四种热固性酚醛树脂在固化过程中的化学变化。结果表明热固性酚醛树脂的固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要的。热固性酚醛树脂在进一步固化时(150—200°)出现了羰基,它的出现不是亚甲基氧化所致,而是部分醚键断裂形成了醛羰基。对热固性酚醛树脂的固化过程的机理进行了讨论。 相似文献
11.
12.
13.
Compounds with bifunctional benzoxazine groups in their molecular structures form crosslinked structures characteristic of phenolic materials through a ring-opening reaction mechanism. This family of compounds offers greater flexibility than conventional novolac or resole resins in terms of molecular design. It is also superior to conventional phenolic resin in process control since it releases no by-product during curing reactions. The materials thus obtained exhibit excellent mechanical integrity with glass transition temperatures over 200°C. The synthesis, composition, and structural analysis of precursors based on bisphenol-A are discussed herein. © 1994 John Wiley & Sons, Inc. 相似文献
14.
Surplus lignin, which is inefficiently used, is generated in the forestry industry. Currently, most studies use lignin instead of phenol to synthesize thermosetting resins which cannot be reprocessed, thus affecting its application field. Thermoplastic phenolic resin has an orderly structure and excellent molding performance, which can greatly improve its application field and economic value. Herein, phenol was partially replaced with enzymolysis lignin (without treatment), generating lignin-based high-ortho thermoplastic phenolic resins (LPRs), and then lignin-based phenolic fibers (LPFs) were prepared by melt spinning. FTIR, 13C-NMR and GPC were used to characterize the ortho–para position ratio (O/P value), molecular weight and its distribution (PDI), and rheological properties of the resin. TG, XRD, SEM and tensile property studies were used to determine the thermal stability, orientation, and surface morphology of the fiber. Lignin addition resulted in the decline of the O/P value and molecular weight of the resin. For the 10% LPR, the O/P value, Mw, and PDI were 1.28, 4263, and 2.74, respectively, with the fiber exhibiting relatively good spinnability. The tensile strength and elongation at break of the 10% LPF were 160.9 MPa and 1.9%, respectively. The addition of lignin effectively improved the thermal properties of the fiber, and the carbon yields of 20% LPF before and after curing were 39.7% and 53.6%, respectively, which were 22.2% and 13.7% higher than that of the unmodified fiber, respectively. 相似文献
15.
新型阻溶促溶酚树脂用于热敏CTP版的性能研究 总被引:2,自引:0,他引:2
使酚树脂与乙烯基醚发生反应,合成出一种新型醚化物,作为新型阻溶促溶剂.将它与产酸剂、背景染料、红外染料、成膜树脂、其它助剂及有机溶剂作为热敏CTP组合物.研究了该热敏CTP组合物的化学性能和热敏成像性能,发现在热敏CTP组合物中适量的新型阻溶促溶剂能够使热敏CTP版的热敏性、显影性、抗碱性及耐异丙醇性都得到了较大的改善. 相似文献
16.
17.
Transformation
of dynamic DSC results into isothermal data for the curing kinetics study
of the resol resins 总被引:1,自引:0,他引:1
M. V. Alonso M. Oliet J. García F. Rodríguez J. Echeverría 《Journal of Thermal Analysis and Calorimetry》2006,86(3):797-802
Kinetics of thermosetting polymers curing is difficult to study by isothermal
methods based on the differential scanning calorimetry (DSC) technique. The
difficulty is due to the low sensitivity of the equipment for total reaction
heat measurements during high temperature process. The aim of this paper is
to display the equivalence between a dynamic model, the Ozawa method, and
an isothermal isoconversional fit, which allows predicting the isothermal
behavior of the resol resins cure through dynamic runs by DSC. In this work,
lignin–phenol–formaldehyde and commercial phenol–formaldehyde
resol resins were employed. In addition, the isothermal kinetic parameters
for both resins were performed by means of transformation of the data obtained
from the dynamic Ozawa method. 相似文献
18.
通过6-氯-5,12-萘并萘醌(1)与酚醛树脂经亲棱取代,一步合成制备具有光致变色性的酚醛树脂(3)。在苯溶液中,光致变色聚合物(3)与光致变色化合物6-{4-[2-(4-羟基苯基)异丙基]苯氧基}-5,12-萘并萘醌(2)有相似的光致变色行为。但是,在聚合物(3)中,由于苯基处于聚合物骨架中不易迁移,使聚合物(3)的变色速度较化合物(2)明显减慢,化合物(2)的光异构化速度常数是聚合物(3)的3倍。同时发现溶剂对聚合物(3)的光诱导trans-ana异构化反应速度有明显影响,在氯仿中的反应速度常数约为在苯中的2倍。 相似文献
19.