罗丹明-B及其烷基衍生物在表面活性剂溶液中探针功能的研究

近十年来,人们除对高度有序的分子晶体进行持续的深入研究外,对另一类有组织的分子集合体的研究也得到了蓬勃发展,特别是利用各种荧光化合物作为探针来研究微组织集合体(micro-organized assembly)的各种特性,更引起人们的光趣。用作荧光探针的化合物有一系列不同的类型,分别适用于不同的研究目的。某些对环境极性、粘度变化非常敏感的分子内电荷转移化合物探针的研究报道较多,对另一类探针化合物,其分子单体与聚集体有不同荧光特征,环境改变能影响探针分子单体与聚集体形成的条件,因此就可通过体系发光特性的变化来推断体系环境的改变,但对这类探针化合物的研究报道不多。已知罗丹明类染料的单体分子与其聚集体的发光行为有较大差别,将亲水性罗丹明化合物联以脂肪长链使之成为具有两亲性质的探针化合物已引起人们的注意,并在某些方面如研究细胞融合过程等取得了成功的应用,然而这类化合物某些基本物化性质的研究尚不够充分。本工作是在这样的背景下对几种带不同脂肪链的罗丹明化合物用作探针时的发光行为进行了比较研究。     

基于有机硼化合物的氟离子化学探针

本文综述了有机硼化合物在氟离子探针领域的研究进展.介绍了基于三芳基硼化合物、硼酸和硼酸酯的有机硼化合物在氟离子检测中的应用,评述了这些化合物的结构和检测性能之间的关系,讨论了检测机理,即有机硼化合物中硼原子空的pπ轨道使其作为路易斯酸能够选择性地结合氟离子,硼原子与氟离子的结合破坏了硼中心与芳香取代基的pπ-π共轭,引起有机硼化合物光物理性质的变化,从而实现对氟离子的高选择性检测.最后提出了有机硼化合物作为氟离子探针存在的一些问题,并展望了有机硼化合物在氟离子探针领域的研究和发展方向.     

萘酰亚胺类荧光分子探针的研究进展

荧光分子探针作为一种有效的金属离子检测手段,不仅使用方便,而且具有高灵敏度,高选择性等突出的优点.作者综述了萘酰亚胺类荧光分子探针的最新研究进展;指出萘酰亚胺化合物具有独特的荧光化学性质(如荧光量子产率高、荧光发射波长适中、斯托克斯位移大、光稳定性好、结构易于修饰等),因此被广泛应用于荧光探针研究领域,并且在合成、离子识别、检测及细胞成像等方面不断取得新的应用.     

选择性识别果糖的二硼酸荧光探针的合成及初步活性研究

通过以2-(4-二羟基硼烷)苯基喹啉-4-羧酸(PBAQA)和羧酸苯硼酸作为功能单体,哌嗪作为连接片,在甲醇溶液中经过进行两次酰胺缩合,得到具有双结合位点的新型水溶性二硼酸化合物.初步的荧光活性实验证明,果糖能够显著性地增强化合物11,12的荧光强度,结合常数显著高于其他糖类.加入75 mmol·L~(-1)果糖后,荧光强度增加12倍.因此,化合物11,12适合用作果糖选择性识别和检测的荧光探针.本文合成具有双结合位点的新型二硼酸化合物水溶性好,这对寻找新型水溶性硼酸荧光探针,提高探针分子在食品和医药中对果糖识别能力具有重要意义.     

通过自由基反应合成聚甲基丙烯酸甲酯大分子单体

大分子单体是一类具有聚合反应活性的聚合物,分子量在几千到数万不等,聚合反应活性点一般是大分子的端基,聚苯乙烯大分子单体是此类化合物的一种［１,２］．若改变聚合物化学结构（ａ）,可制成具有不同性能的大分子单体;若改变端基（ｂ）,则可使大分子单体具有不同...     

新型单体——丙烯酰二甲基对苯二胺(DMAPAA)及其聚合物溶液的荧光光谱的研究

本工作对一种新型单体——丙烯酰二甲基对苯二胺(DMAPAA)及其聚合物溶液的荧光光谱进行了研究。研究结果表明:由于该单体分子内同时存在着电子给体和电子受体两个部分,在光的激发下可发生分子间电子转移,该单体化合物和相应高聚物相比,前者只有较弱的荧光发生。在光的作用下该单体分子可发生光聚合反应生成聚合物。     

生物小分子巯基化合物荧光探针研究进展

细胞内的小分子巯基化合物在诸多生理过程中扮演重要角色.分子荧光探针具有灵敏度高、选择性好、生物相容性好、实时原位监测等优点.因此,构建可以选择性检测巯基化合物的荧光探针具有重要的生物学和医学意义.根据荧光探针与巯基化合物的反应类型总结了近几年来小分子巯基化合物荧光探针的设计策略和研究进展.     

环境友好的可控自由基聚合*

近年来,我们以环境友好、简便快捷、活泼可控、单体普适性强的光活化室温RAFT聚合为主攻目标,针对长波紫外或可见光活化室温RAFT聚合反应特征及其应用展开了深入探讨。研究表明,作为RAFT聚合链转移剂的硫酯化合物具有分别在紫外光和可见光波段的双波段光吸收特征。短波紫外光强吸收,导致硫酯键的光解。然而,可见光波段弱的光吸收则活化其自由基加成产物的断裂反应,加速室温RAFT过程并确保聚合反应的活性特征。高效光引发,可显著缩短RAFT聚合引发期。通过光开关,可实时启动或终止聚合。与常规热聚合不同,室温以下这类聚合反应不存在明显的热活化效应。由此,我们创建了环境友好、单体普适性强、快速可控、通过光开关可实时控制聚合反应启动或终止的光活化室温RAFT聚合,将其成功拓展到太阳光和水溶液聚合体系,并运用于温和条件下新兴水溶性温敏高分子、仿生光响应高分子的快捷可控合成。     

半茂钛催化乙烯与降冰片烯共聚的理论研究

运用密度泛函方法对含酚-膦配体的半茂钛化合物催化乙烯与降冰片烯共聚合反应的详细机理进行了理论研究.计算结果表明,虽然由于配体的不同,此系列钛化合物具有两种典型结构,但其在助催化剂作用下形成的催化活性种均为相似的P-Ti成键的阳离子物种.在烯烃聚合反应中,烯烃单体的配位插入反应易于从阳离子活性种中氧原子的对位发生.由乙烯及降冰片烯聚合反应各步骤的比较可知,乙烯单体插入Ti-Me结构的初始插入步骤较插入Ti-Et结构困难得多,因而链引发步骤为乙烯均聚的决速步骤.而降冰片烯单体插入Ti-Me结构较之乙烯单体容易得多,但由于降冰片烯单体位阻较大,其连续插入十分困难.在共聚反应过程中,NBE单体的引入可以使得Et插入反应容易越过较难的插入Ti-Me结构步骤,这是NBE与Et共聚反应的反应活性远大于催化Et均聚反应的最主要原因.     

用重氮盐引发N-乙烯咔唑之光聚合研究

<正> 聚N-乙烯咔唑[P(N-VCz)]是典型的有机光导体,已被广泛应用于静电照相和光导热塑全息记录中。 N-乙烯咔唑是一种聚合活性较大的单体,聚合反应可通过自由基、阳离子、Zeigler-Natta型催化剂和电荷转移引发等途径进行。 已有报道,芳香族重氮盐可作为光聚合引发剂。如对环氧化合物、丙烯腈等单体的聚     

荧光探针法研究核壳结构有机硅-丙烯酸酯乳液的聚合行为

以芘为荧光探针,探讨了有机硅-丙烯酸酯核壳乳液聚合过程中,芘的第一振动峰(373 nm处)与第三振动峰(384 nm处)荧光强度的比值I1/I3与乳化剂、有机硅单体(D4)和引发剂(KPS)用量之间的关系,并结合聚合过程中探针芘的I1/I3峰值与单体转化率及乳胶粒形态演变之间的关系,研究了核壳结构有机硅-丙烯酸酯乳液的聚合行为.研究结果表明,探针芘的I1/I3峰值随乳化剂用量,D4用量,KPS用量不同发生相应的变化,随单体转化率的增加而增大.当乳化剂用量、D4用量、KPS与总单体的质量比依次为2 g、8 g、0.7%时,得到的乳液具有优良的综合性能.聚合反应过程中,当种子乳胶粒转变为核壳乳胶粒时,芘的I1/I3峰值仍呈现出明显的转变,说明有机硅-丙烯酸酯核壳乳液具有互穿聚合物网络结构.因此,荧光探针可用于研究有机硅-丙烯酸酯核壳乳液聚合反应进程.     

Perfluorocyclobutyl-containing Amphiphilic Block Copolymers Synthesized by RAFT Polymerization

Amphiphilic block copolymers containing hydrophobic perfluorocyclobutyl‐based (PFCB) polyacrylate and hydrophilic poly(ethylene glycol) (PEG) segments were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The PFCB‐containing acrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)‐phenyl acrylate, was first synthesized from commercially available compounds in good yields, and this kind of acrylate monomer can be homopolymerized by free radical polymerization or RAFT polymerization. Kinetic study showed the 2,2′‐azobis(isobutyronitrile) (AIBN) initiated and cumyl dithiobenzoate (CDB) mediated RAFT polymerization was in a living fashion, as suggested by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer, while the polydispersity indices kept less than 1.10. The block polymers with narrow molecular weight distributions (M_w/M_n≦1.21) were prepared through RAFT polymerization using PEG monomethyl ether capped with 4‐cyanopentanoic acid dithiobenzoate end group as the macro chain transfer agent (mPEG‐CTA). The length of the hydrophobic segment can be tuned by the feed ratio of the PFCB‐based acrylate monomer and the extending of the polymerization time. The micellization behavior of the block copolymers in aqueous media was investigated by the fluorescence probe technique.     

Amphiphilic copolymers with increased affinity for substrates

The copolymers of methyl quaternized 2-dimethylaminoethyl acrylate and styrene, 2-vinyl naphthalene, acrylic acid iso-octyl ester, or acrylic acid n-butyl ester have been prepared. Studies were made of the binding of a “binding probe,” methyl orange, by the copolymers in aqueous solution. The first binding constants and the thermodynamic parameters in the course of the binding were evaluated. Furthermore, the intensity of fluorescence of a hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate, in the presence of these polymers was investigated. In addition, the fluorescence spectra of monomer and excimer emissions of the polymers with aromatic residues were measured. The excimer/monomer fluorescence intensity ratio was studied in the presence of various additives such as methyl orange, urea, methanol, and NaCl to gain an insight into the nature of microdomains in the polymer. The nature and phenomena of dye binding and hydrophobic fluorescent probe binding with the polymers are discussed. © 1993 John Wiley & Sons, Inc.     

单电子转移活性自由基聚合制备支化聚丙烯酸甲酯的研究

以丙烯酸2-(2-溴异丁酰氧基)乙酯(BIEA)为引发剂单体(inimer),丙烯酸甲酯(MA)为单体,Cu0/CuBr2和N,N,N',N″,N″-五甲基二亚乙基三胺(PMDETA)为催化体系,二甲亚砜(DMSO)为溶剂,在常温(25℃)下通过单电子转移活性自由基聚合(SET-LRP)合成支化聚丙烯酸甲酯.聚合反应过程中,采用气相色谱(GC)、核磁共振(1H-NMR)和三检测体积排除色谱(TD-SEC)等测试手段跟踪分析和表征支化聚合物的结构.研究结果表明,采用SET-LRP方法,铜粉作为催化剂,常温下聚合反应就能快速进行,130 min之内MA的转化率已达99%以上,制备出高分子量支化聚合物.随着反应的不断进行,聚合物支化程度不断提高,相比较同分子量下的线型聚合物其黏度不断下降,Mark-Houwink特征常数α最小可达0.290.此外,低分子量聚合物组分随着反应不断减少,在高单体转化率下,聚合体系中以高支化度的聚丙烯酸甲酯为主.     

PEGDA‐based luminescent polymers prepared by frontal polymerization

Frontal polymerization (FP) of poly(ethylene glycol) diacrylate (PEGDA) was carried out using benzoyl peroxide (BPO) as radical initiator. In addition, a pyrene containing monomer, 1‐pyrenebutyl acrylate (PyBuAc), was incorporated as a fluorescent probe in order to obtain luminescent materials with different chromophore contents. The resulting polymers were characterized by FT‐IR spectroscopy in the solid state and their thermal properties were determined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Moreover, the optical properties of these materials were studied by absorption and fluorescence spectroscopy. The maximum amount of the incorporated pyrene‐containing monomer into the polymer matrix was limited to 1 wt % by the polymerization process. The obtained labeled polymers poly(PEGDA‐co‐PyBuAc) exhibited a broad absorption band at 345 nm. The fluorescence spectra of these polymers exhibited mainly “monomer emission” so that no excimer emission was observed. It is possible to tune the color of the emitted light by varying the pyrene content in the samples. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2890–2897     

Solid‐state polymerization of 2,3,6,7,10,11‐hexa(methacrylate) triphenylene

A new monomer, 2,3,6,7,10,11‐hexa(methacrylate) triphenylene (HMTP), and its crystals have been successfully synthesized, and the solid‐state polymerization under UV irradiation has been investigated. The photo polymerization of HMTP in solid was confirmed by the reduction of vinyl bonds in the FT‐IR and UV spectra of PHMTP in comparison with the corresponding spectra of its precursor. Thus, IR spectroscope was used to follow the polymerization of HMTP crystals under UV irradiation, and kinetic studies show a first‐order reaction with rate constant of 6.12 × 10^?3 min^?1. This value is slightly larger than that measured by the weight method. The polarizing optical microscope and X‐ray diffraction were used to study the crystal structure difference between the polymers and its monomer. The results show that the polymers' crystals obtained from photo polymerization kept the monomer crystal lattice. Because of strong overlap between the π‐electron of the triphenylene, the monomer and polymer crystals showed different fluorescence properties. All these results proved that the photo polymerization of HMTP crystals is governed by the packing structure of monomer molecules; in other words, this reaction is just lattice controlled polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1526–1534, 2005     

荧光探针法研究乳化剂对硅/丙核壳乳液聚合行为的影响

用荧光探针(芘)法测定了十二烷基硫酸钠(SDS)、烷基酚聚氧乙烯醚(OP-10),以及复配乳化剂的临界胶束浓度(CMC),并首次把荧光探针技术应用到硅/丙核壳乳液聚合反应的研究中.利用芘的I₁/I₃值,结合胶束微环境的极性变化规律和乳液聚合机理,探讨了乳化剂对聚合反应的影响.结果表明,荧光探针(芘)法可用于研究硅/丙乳液的聚合行为和确定乳化剂配比.通过粒径分析、透射电镜(TEM)对产品的结构进行了表征.     

规整链球型含C_(60)聚(丙烯酸β-羟乙酯)的合成及其在水中的自组装

Ｃ60 由于其独特的物理化学性质 ,在生命科学中引起了人们的广泛兴趣 .例如 :水溶性Ｃ60 的羧酸衍生物 ,羟基取代Ｃ60 ,Ｃ60 的氨基酸水溶性衍生的合成已有报道[1～ 3] ,并被用来研究Ｃ60 的生物化学及医学活性 .Ｔｏｋｕｙａｍａ[4 ] 等合成了酶功能化Ｃ60及与核酸连接的Ｃ60 ,研究并证明了它的细胞毒性及Ｇ 选择ＤＮＡ切割能力等生化活性 .Ｆｒｉｅｄｍａｎ[5]等合成了水溶性Ｃ60 的羧酸衍生物 ,研究了它对ＨＩＶ 1艾滋病毒的抑制作用 ,此外 ,关于不同Ｃ60含量的Ｃ60 蛋白质衍生物的合成及性质的研究也有报道[6] .Ｃ60 是一个直径为 0 71…     

Synthesis and photopolymerization of novel multifunctional vinyl esters

Novel mono‐ and multifunctional vinyl ester monomers containing thioether groups were synthesized via an amine‐catalyzed Michael addition reaction between vinyl acrylate and multifunctional thiols. Using photo‐differential scanning calorimetry and real‐time Fourier transform infrared (RTIR) spectroscopy, the polymerization kinetics and oxygen inhibition of the homopolymerizations of the vinyl ester monomers were investigated. The effect of the vinyl ester and thioether group on acrylate/vinyl ester and thiol/vinyl ester copolymerizations was determined using real‐time IR spectroscopy to monitor polymerization rates of acrylate, vinyl, and thiol groups simultaneously. Polymerization of the vinyl esters used was found to be relatively insensitive to oxygen inhibition. We propose that the thioether group is responsible for reducing oxygen inhibition by a series of chain transfer/oxygen‐scavenging reactions. In polymerization of a acrylate/vinyl ester mixture both in nitrogen and in air, the vinyl ester monomer significantly enhances the polymerization rates and the conversion of the acrylate double bonds via plasticization of the crosslinked matrix and reduction of inhibition by oxygen. Ultimately, the vinyl ester monomer is incorporated into the polymer network. Thiol/vinyl ester free‐radical copolymerization is much faster than either thiol/allylether copolymerization or vinyl ester homopolymerization. The electron‐rich vinyl ester double bonds ensure rapid copolymerization with thiol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4424–4436, 2004     

On the copolymerization of acrylates in the modified microemulsion process

Copolymerization of methyl methacrylate, methyl acrylate, butyl methacrylate, and butyl acrylate in turn was performed in the modified microemulsion polymerization process, i.e., continuous addition of monomer to a preemulsified system. It was found that the particle size of the copolymer microlatex did not change distinctly with the monomer composition. The estimation of emulsifier coverage on the microlatex particles indicated that the process switched from a traditional microemulsion to a normal seeded emulsion polymerization very soon after monomer dropping began. Therefore, a longer dropping time is needed to produce a microlatex with narrow dispersed particle size. Besides, in the modified microemulsion polymerization less emulsifier is needed to produce a stable microlatex. This behavior is related to the mechanism of normal seeded emulsion polymerization during monomer dropping.