Preparation and electrorheological characteristic of CdS/Polystyrene composite particles

Cadmium sulfide/polystyrene (CdS/PS) hybrid particles were synthesized and their physical characteristics including electrorheology were examined. Monodisperse CdS/PS nanocomposite particles with diameters of 2 μm were obtained via dispersion polymerization. To form cadmium sulfide nanoparticles onto the PS surface, 2-(dimethylamino)ethyl methacrylate was used as a functional monomer for coordinating with Cd²⁺ ions. Finally, cadmium sulfide nanoparticles with size < 10 nm were formed with the release of S²⁻ ions from thioacetamide. The morphology of the as-prepared CdS/PS nanocomposite particles clearly showed that the CdS particles are present on the surface of the PS. The optical properties were also studied. In addition, their electrorheological characteristics were confirmed by using optical microscopy with applied electrical field. Recently, dielectric properties of CdS nanoparticles were already reported; however, electrorheological characteristics of CdS/PS nanocomposite particles were investigated for the first time.     

Aqueous particulate foams stabilized solely with polymer latex particles

In this article, a wide range of latexes are evaluated as possible foam stabilizers. These include near-monodisperse, poly(N-vinyl pyrrolidone)-stabilized polystyrene [PNVP-PS] latexes with diameters ranging from 170 nm to 1.62 microm, submicrometer-sized poly(ethylene glycol)-stabilized polystyrene [PEGMA-PS] latex particles, a PNVP-stabilized poly(4-bromostyrene) [PNVP-PBrS] latex with a mean diameter of 870 nm, two PNVP-stabilized poly(methyl methacrylate) [PNVP-PMMA] latexes with mean diameters of 730 nm and 1.20 microm, a PNVP-stabilized poly(2-hydroxypropyl methacrylate) [PNVP-PHPMA] latex with a mean diameter of 630 nm, and a charge-stabilized anionic PS latex of 220 nm diameter. The effect of varying the particle size, latex concentration, and latex surface composition on foam stability were studied in detail. The larger PNVP-PS latexes, the PNVP-PBrS, and the two PNVP-PMMA latexes gave highly stable foams, whereas PEGMA-PS, PNVP-PHPMA, and the charge-stabilized PS latex produced either no foams or foams with inferior long-term stabilities. Scanning electron microscopy studies revealed hexagonally close-packed latex arrays in the walls of the dried foam, which leads to localized moiré patterns being observed by optical microscopy. Moreover, these dried foams are highly iridescent in bright transmitted light.     

Electrochemical synthesis of free-standing CdS nanoparticles in ethylene glycol

A novel one-step electrochemical method for the preparation of capping-free cadmium sulfide nanoparticles is described. With gold as the working electrode, capping-free CdS nanoparticles are synthesized very conveniently at 70°C in the ethylene glycol (EG) solution of elementary sulfur, cadmium salt, and supporting electrolyte at −0.1 V. By carefully selecting the reductive potential, elementary sulfur is reduced while the reduction of Cd²⁺ is blocked by the formation of a sulfur monolayer on the gold electrode surface. The produced S²⁻ reacts with cadmium cations in the solution to produce CdS. In this method, magnetic stirring can effectively prevent the deposition of CdS on the electrode surface. XRD analysis indicates that the product is pure cubic-phase CdS. The size and morphology of the particles are studied by TEM. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 9, pp. 1060–1064. The text was submitted by the authors in English.     

Chemically binding Eu^3＋ onto CdS semiconductor nanoparticle surface

Europium ions were chemically bound to CdS nanoparticles surface by diethylenetri-aminepentaacetate (DTPA, 1) in a two-step synthetic route. First 1 was applied to chelate with cadmium on the surface of cadmium-rich CdS nanoparticles and act as a capping agent. Further, the purified 1-capped particles were used to bind with Eu~3 . The purified and redispersed particles were characterized by photoluminescence spectroscopy, TEM and SEM. It was observed that Eu~3 on the nanoparticle surface significantly increased the band gap emission and decreased the surface emission intensity of the CdS nanoparticles.     

Stabilization of the thermodynamically favored polymorph of cadmium chalcogenide nanoparticles CdX (X = S, Se, Te) in the polar mesopores of SBA-15 silica

A versatile synthetic approach to cadmium chalcogenide nanoparticles in the mesopores of SBA-15 silica as a host matrix was developed. The use of cadmium organochalcogenolates of the type Cd(XPh)(2).TMEDA (X = S, Se, Te) allowed the preparation of nanoparticles of all three cadmium chalcogenides following the same experimental protocol. Particles of CdS, CdSe, and CdTe with a particle size of 7 nm were prepared from this class of single-source precursors. The incorporation of the precursor molecules into the pores was achieved by melt infiltration at a temperature of 140 degrees C. Subsequent pyrolysis of the precursors in the mesopores yielded the semiconductor particles. Owing to the high polarity of the silanol-covered pore walls, which lower the surface energy of the particles to a large extent, the dimorphic cadmium chalcogenides are obtained in their thermodynamically favored modifications; e.g., CdS particles crystallize in the wurtzite type, CdTe particles are obtained in the zinc blende structure, and CdSe (where no unambiguous preference exists) crystallizes as a "mixture" of both structures with a rather random stacking sequence.     

钛酸四丁酯水解制备聚苯乙烯/二氧化钛核壳粒子及空心二氧化钛微球

通过无皂乳液聚合方法制备了阳离子型及阴离子型聚苯乙烯(PSt)乳胶粒,并对后者用γ-氨丙基三乙氧基硅烷(KH550)进行了表面改性制得了乳胶粒表面载正电荷的乳液.在乙醇与水的混合溶剂中,分别使用以上3种PSt乳胶粒为核加入钛酸四丁酯制备了核壳型PSt/TiO2复合粒子.结果显示,仅在使用经KH550改性的阴离子PSt乳...     

A facile method to prepare CdS/polystyrene composite particles

Nano-CdS/polystyrene composite particles were prepared via surfactant-free emulsion polymerization. 2-(Dimethylamino)ethyl methacrylate (DMEMA) was used as auxiliary monomer which co-polymerized with styrene (St) and provided the location for coordinating with Cd²⁺. By the coordination of Cd²⁺ ions to DMEMA, mono-disperse polystyrene with the Cd²⁺ ions on the particles surface were prepared successfully. With the release of S²⁻ ions from the thioacetamide (TAA), cadmium sulfide (CdS) was formed. Nano-CdS/PS composite particles could be synthesized via this facile method. The order of materials addition and the amount of initiator both are playing important roles to the final morphologies of the composite particles. In the method proposed in this study, no surfactant was used, and the stable emulsion was successfully obtained. UV–vis absorption and fluorescence measurement indicated the quantum dot effect in the resulted nano-CdS/PS composite particles. The possible composite particle formation mechanism was presented.     

Fabrication of core/shell hybrid organic–inorganic polymer microspheres via Pickering emulsion polymerization using laponite nanoparticles

Oil-in-water (o/w) emulsions of styrene, as monomer oil in water, were achieved successfully via Pickering emulsification with laponite nanoparticles as the sole inorganic stabilizers. The formed emulsions showed excellent stability not only against droplets coalescence (before polymerization) but also against microparticles coagulation (after polymerization). Generally, the number of composite polystyrene microparticles (PS) increased and their sizes decreased with the content of solid nanoparticles used in stabilizing the precursor o/w emulsions. This is consistent with the formation of rigid layer(s) of the inorganic nanoparticles around the PS microparticles thus a better stability was achieved. The composite microparticles were characterized using various techniques such as surface charge, stability, transmission electron microscope (TEM), scanning electron microscope (SEM) and Fourier transform infra-red (FT-IR). Coating films of the prepared latexes were applied to flat glass surfaces and showed reasonable adhesion compared to PS latex particles prepared with conventional surfactants. The effect of employed conditions on the features of the resulting emulsions in terms of stability and particle size has been discussed.     

A Facile One‐Step Method to Prepare Three‐Dimensional Ordered Latex Particles

Three‐dimensional ordered latex particles were prepared in presence of polymerizable anionic emulsifier—sodium undec‐10‐enoate (UDNa) in emulsion polymerization. Only under a certain monomer/emulsifier ratio can we get such a result. Three‐dimensional ordered latex particles cannot be acquired with the use of conventional emulsifiers such as sodium dodecyl sulfate (SDS), etc. The double bond of polymerizable emulsifier can copolymerize with the main monomer and become covalently bound to integrate with the main polymer chains which result in stable latexes. TEM and SEM images show that whether it is diluted or not the latexes can always keep in the three‐dimensional regularly order.     

水溶性CdSe/CdS量子点的合成及其与牛血清蛋白的共轭作用

用巯基乙酸(TGA)作为稳定剂，合成了水溶性的CdSe和核壳结构的CdSe/CdS半导体量子点。吸收光谱和荧光光谱研究表明，核壳结构的CdSe/CdS半导体量子点比单一的CdSe量子点具有更优异的发光特性。用TEM、电子衍射(ED)和XPS分别表征了CdSe和CdSe/CdS纳米微粒的结构、形貌及分散性。红外光谱和核磁共振谱证实了巯基乙酸分子中的硫原子和氧原子与纳米微粒表面的金属离子发生了配位作用。在pH值为7.4的条件下，将合成的CdSe和CdSe/CdS量子点直接与牛血清白蛋白(BSA)相互作用。实验发现，两种量子点均对BSA的荧光产生较强的静态猝灭作用；而BSA对两种量子点的荧光则具有显著的荧光增敏作用，存在BSA时CdSe/CdS量子点的荧光增强是不存在BSA时体系荧光强度的3倍。     

ZnO/CdS复合材料的合成与可见光催化性能

采用喷雾辅助气相沉积法在水热法合成的ZnO纳米线上沉积CdS纳米颗粒。采用X射线衍射仪（XRD）、激光拉曼仪（Raman）、扫描电镜（SEM）、透射电镜（TEM）、X射线光电子能谱分析谱（XPS）和紫外可见漫反射光谱等测试手段对复合光催化剂进行表征。结果表明,3~10 nm的CdS纳米粒子修饰在直径约为100 nm ZnO纳米线的表面。XPS和Raman表明复合材料中ZnO和CdS之间存在化学相互作用。可见光催化降解罗丹明B实验结果表明ZnO/CdS复合材料的催化性能优于单相CdS或ZnO,沉积时间为30 s合成的ZnO/CdS速率常数分别是CdS和ZnO的2.91和4.03倍,且具有较高的稳定性。ZnO/CdS复合材料光催化性能增强的可能原因为光吸收范围的拓展和光生载流子分离效率的提高。     

Different Mixing Types CdSe‐CdS Nanocomposites

The optical properties of 2 mixing types of CdS‐CdSe nanoparticles (i.e., coprecipitated CdS‐CdSe nanoparticles, CdS‐coated CdSe (CdSe/CdS)) were studied. Results indicated that the co‐precipitated nanoparticles kept the similar optical properties of both CdS and CdSe's, while the CdS/CdSe core‐shell structure showed totally different optical properties from the simple components. We paid special attention to the core/shell structure, as the core‐shell structure showed a better passivating effect. Therefore, the XRD and TEM were tested on the core‐shell structure. XRD results showed that the diffraction patterns of core‐shell structure were roughly the same as their simple components. And the TEM indicated the core‐shell structure had a uniform dispersion in the solution.     

Cadmium sulphide quantum dots in morphologically tunable triblock copolymer aggregates

Cadmium sulfide (CdS) quantum dots (QDs) are formed within poly(ethylene oxide)-block-polystyrene-block-poly (acrylic acid) (PEO-b-PS-b-PAA) triblock copolymer aggregates of different architectures. These structures are obtained starting with the same ionically cross-linked primary micelles consisting of a cadmium acrylate core, a PS shell, and a PEO corona. One morphology is a worm-shaped micelle prepared in tetrahydrofuran (THF) in which the CdS QDs are surrounded by the PAA and aligned as a loose necklace in the PS matrix. The PEO serves as a corona around the PS rod. Another structure is a multicore spherical (ca. 50 nm) water soluble PS micelle, surrounded by PEO chains. The CdS particles within these two latter structures are formed by the reaction of cadmium ions present in the acrylate cores with hydrogen sulfide. In a third structure, the CdS QDs are located on the surface of PS micelles. A fourth spherical single-core micelle structure is postulated to exist in dilute THF solutions. The dimensions in all the aggregates can be controlled by the block length.     

Is latex surface charge an important parameter for foam stabilization?

We describe the facile production of highly stable foams stabilized solely by cationic polystyrene latex particles. Three model polystyrene latexes were synthesized using either a cationic 2,2'-azobis(2-diisobutyramidine) dihydrochloride (AIBA) or an anionic ammonium persulfate (APS) radical initiator: a 724 +/- 81 nm charge-stabilized cationic polystyrene latex [AIBA-PS], an 800 +/- 138 nm sterically stabilized cationic latex prepared using a poly(ethylene glycol) monomethacrylate macromonomer [PEGMA-AIBA-PS], and a 904 +/- 131 nm charge-stabilized anionic polystyrene latex [APS-PS], respectively. The effect of particle surface charge, latex concentration, and solution pH on foam stability was studied in detail. The PEGMA-AIBA-PS latex proved to be the best foam stabilizer even at relatively low latex concentrations (3.0 wt %), with long-term foam stabilities being obtained after drying. The AIBA-PS latex also produced stable foams, albeit only at higher latex concentrations. However, the APS-PS latex proved to be an ineffective foam stabilizer. This is believed to be primarily due to the anionic surface character of this latter latex, which prevents its adsorption at the anionic air-water interface. This hypothesis is supported by the observation that the AIBA-PS latex no longer acts as an effective foam stabilizer above its isoelectric point (pH 7.04). Scanning electron microscopy studies revealed the formation of well-defined latex bilayers within dried foams, which indicates that the wet air bubbles are stabilized by latex monolayers prior to drying. However, little or no long-range ordering of the latex particles was observed on the surface of the bubbles, which is presumably related to the latex polydispersity.     

水热法合成CdS/ZnO核壳结构纳米微粒

以半胱氨酸镉配合物为前驱体,采用水热法合成CdS纳米微粒,并以ZnO对其进行表面修饰,形成具有核／壳结构的CdS／ZnO半导体纳米微粒,CdS纳米微粒表面经ZnO修饰后,其带边发射大大增强,透射电镜显示,110℃下反应4h所得的CdS／ZnO颗粒尺寸约为20nm,电子衍射表明其结构为六方相。     

水溶性的CdSe/CdS/ZnS量子点的合成及表征

用L-半胱氨酸盐(Cys)作为稳定剂,合成了水溶性的双壳结构的CdSe/CdS/ZnS半导体量子点。吸收光谱和荧光光谱结果表明,双壳结构的CdSe/CdS/ZnS纳米微粒比单一的CdSe核纳米粒子和单核壳结构的CdSe/CdS纳米粒子具有更优异的发光特性。用透射电子显微镜(TEM)、ED、XRD、XPS和FTIR等方法对CdSe核和双壳层的CdSe/CdS/ZnS纳米微粒的结构、分散性及形貌分别进行了表征。     

Optical properties of core/shell typed PMMA/CdS nanoparticles prepared by in situ and ex situ surfactant-free emulsion polymerization

Core/shell poly(methyl methacrylate)/cadmium sulfide (PMMA/CdS) nanoparticles were prepared by surfactant-free emulsion copolymerization with 2-(dimethylamino)ethyl methacrylate (DMAEMA) auxiliary monomer. According to the addition time of Cd²⁺ ions, the synthesis of the hybrid nanoparticles was conducted in in situ and ex situ techniques. The core/shell PMMA/CdS nanoparticles synthesized by the post-addition (ex situ) of Cd²⁺ ions showed a wide size distribution and interference fringes in the photoluminescence (PL) spectrum. However, these results were improved when the PMMA/CdS nanoparticles were synthesized in the presence of Cd²⁺ ions (in situ method). The in situ method made it possible to obtain monodisperse hybrid nanoparticles and fairly narrow band-gap emission.     

A novel ultrasound-assisted approach to the synthesis of CdSe and CdS nanoparticles

Hexagonal CdSe and hexagonal CdS nanoparticles have been prepared using Cd(Ac)₂ and less hazardous elemental Se or S as precursors, respectively, with the aid of ultrasound irradiation under an atmosphere of H₂/Ar (5/95, V/V). The products consist of 7-10 nm nanocrystallites which aggregated in the form of polydispersive nanoclusters with sizes in the range 30-40 nm in the case of CdSe, and near monodispersive nanoclusters with a mean size of about 40 nm in the case of CdS. X-ray diffraction, high-resolution TEM and SAED patterns (selected area electron diffraction patterns) show that the as-prepared particles are well crystallized. X-ray photoelectron spectroscopy (XPS) measurements further confirm the formation of CdSe and CdS. Diffuse reflection spectra indicate that both the CdSe and the CdS nanocryslallites are direct band-gap semiconductors with band-gap values of about 1.83 and 2.62 eV, respectively. Control experiments demonstrate that the hydrogen is the reducing agent, and the extreme high temperature induced by the collapse of the bubble accelerates the reduction of elemental Se or S by hydrogen. An ultrasound assisted in situ reduction/combination mechanism is proposed.     

SiO_2/PVAc无机-有机复合微球的合成及其膜性能研究

以纳米二氧化硅粒子(SiO2)为稳定剂,在少量反应型阴离子乳化剂——烯丙氧基羟丙磺酸钠(HAPS)作助稳定剂的情况下,制备了具有草莓型结构的二氧化硅/聚醋酸乙烯酯(SiO2/PVAc)无机-有机纳米复合微球.研究表明,纳米SiO2与PVAc的氢键作用是形成这种单分散草莓型SiO2/PVAc无机-有机纳米复合微球的关键.透射电镜(TEM)观察显示,纳米SiO2吸附在PVAc表面,形成草莓型结构.讨论了纳米二氧化硅溶胶的种类和用量、乳化剂种类对复合微球形态及其膜性能的影响,并讨论了复合微球的形成机理.     

Synthesis and electrophoretic concentration of nanoparticles of CdS in reversed micellar solutions

Stable organosols of cadmium sulfide are obtained via the ion exchange reaction of cadmium nitrate with sodium sulfide in reversed micellar solutions of Brij-30 in n-decane and are characterized by means of spectrophotometry, luminescence, photon correlation spectroscopy (PCS), and transmission electron microscopy (TEM). It is established that adding anionic surfactant AOT to organosols produces double electric layers on the surfaces of nanoparticles and contributes to an additional 50-fold electrophoretic concentration. Electrophoretic concentrates of cadmium sulfide nanoparticles (0.5 M) are obtained in cells with vertical orientation of the electrodes and periodic changes in polarity. The average diameter of the nanoparticles according to TEM data is 5 nm, considerably less than the hydrodynamic diameter found by PCS (70 nm), testifying to the complex structure of a mixed adsorption layer surrounding a nanoparticle.