Effect of the Support on the Nature of Metal-Promoter Interactions in Ru-Cs<Superscript>+</Superscript>/MgO and Ru-Cs<Superscript>+</Superscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Ammonia Synthesis

The Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ catalysts, which were prepared by an impregnation method using RuOHCl₃ and Cs₂CO₃ as precursor compounds and reduced with H₂ at 450°C, are characterized by X-ray diffraction, high-resolution transmission electron microscopy (with X-ray microanalysis), and X-ray photoelectron spectroscopy (XPS). The Cs⁺/MgO(Al₂O₃) systems, Ru-Cs⁺ black, and model systems prepared by cesium sputtering onto polycrystalline ruthenium foil are studied as reference samples. It is found that, in the Ru-Cs⁺/MgO sample, cesium is present as a Cs_{2 + x}O cesium suboxide, which weakly interacts with the support, localized on the surface of Ru particles or near them. In the case of Ru-Cs⁺/γ-Al₂O₃, cesium occurs as a species that is tightly bound to the support; this is likely surface cesium aluminate, which prevents promoter migration to Ru particles. The Ru-Cs⁺/MgO sample exhibits a considerable shift of the Ru3d line in the XPS spectra toward lower binding energies, as compared to the bulk metal. It is hypothesized that this shift is due to a decrease in the electron work function from the surface of ruthenium because of the polarizing effect of Cs⁺ ions in contact with Ru particles. Based on the experimental results, the great difference between the catalytic activities of the Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ systems in ammonia synthesis at 250–400°C and atmospheric pressure is explained.     

Catalytic properties of Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts in the aqueous-phase reforming of ethylene glycol: Effect of the alumina support

The influence of the alumina support on the catalytic activity of Pt/Al₂O₃ catalysts in aqueous phase reforming of ethylene glycol to hydrogen was studied. The catalysts were prepared by impregnation of γ-, δ-, and α-alumina with H₂PtCl₆. The highest rate of hydrogen production (452 μmol min⁻¹ g⁻¹) obtained with the Pt/α-Al₂O₃ catalyst can be related to the highest extent of dispersion of Pt on α-Al₂O₃. XPS, TEM-EDX and TPR-H₂ measurements showed the absence of chloride-containing surface complexes in the Pt/α-Al₂O₃ catalyst. However, chloride-containing entities were found on the surface of Pt/γ-Al₂O₃ and Pr/δ-Al₂O₃ catalysts. When chloride ions are removed chlorinated Pt species facilitate the sintering of Pt crystallites and in this way affect the extent of Pt dispersion. Moreover, depending upon the particular crystalline form, alumina atoms have different coordination and alumina surfaces contain varying amounts of OH groups of different nature which affect the interaction between Pt and the support.     

<Superscript>1</Superscript>H and <Superscript>31</Superscript>P nuclear spin-lattice relaxation in C-phosphorylated oximes

The ¹H spin-lattice relaxation times of the proton-bearing groups and the ³¹P spin-lattice relaxation times in C-phosphorylated oximes R¹C(=NOH)P(=O)R²R³ (R¹ = Ph, R² = R³ = OMe; R¹ = Ph, R² = OMe, R³ = OCH²CH²Br; R¹ = PhCH², R² = R³ = OCHMe²) and dioxime R²P(=O)C(=NOH)(CH₂)₄C(=NOH)P(=O)R² (R = OMe) in DMSO-d₆ were measured. The characteristic reorientation times of the whole molecules were estimated using the measured values of the ¹H relaxation times and the results of semiempirical PM3 quantum chemical calculations of the molecular geometries. The reorientation times were used to identify the contributions of different relaxation mechanisms to the rate of ³¹P spin-lattice relaxation. The anisotropy of the chemical shielding of ³¹P nuclei was evaluated from the difference between the ³¹P relaxation rates measured at 101.27 and 161.92 MHz.     

Crystalline cadmium dialkyl phosphorodithioate complexes: Synthesis and structural organization as probed by multinuclear <Superscript>13</Superscript>C, <Superscript>31</Superscript>P,and <Superscript>113</Superscript>Cd CP/MAS NMR and single-crystal X-ray diffraction

The cadmium O,O′-dethyl (I) and O,O′-di-sec-butyl phosphorodithioate (II) complexes have been synthesized and characterized in detail by ¹³C, ³¹P, and ¹¹³Cd CP/MAS NMR. X-ray crystallography shows that complex II has a binuclear molecular structure [Cd₂{S₂P(O-s-C₄H₉)₂}₄]. For ³¹P and ¹¹³Cd NMR signals, the chemical shift anisotropy δ_aniso and the asymmetry parameter η have been calculated. The ³¹P NMR signals are assigned to the terminal and bridging ligands in the complexes.     

Structure of binuclear platinum(III) acetamidate complexes in solutions as probed by <Superscript>195</Superscript>Pt, <Superscript>13</Superscript>C,and <Superscript>1</Superscript>H NMR spectroscopy

¹⁹⁵Pt, ¹H, and ¹³C NMR spectroscopy was used to study the structure of binuclear platinum(III) acetamidate complexes with 1,10-phenanthroline and 2,2′-bipyridine ligands [Pt₂(phen)₂(acam)₄](NO₃)₂ (1) and [Pt₂(bipy)₂(acam)₄](NO₃)₂ (2) in aqueous solutions. The ¹⁹⁵Pt NMR spectra of solutions of complexes 1 and 2 in D₂O exhibit two signals with satellites due to the ¹⁹⁵Pt–¹⁹⁵Pt spin-spin coupling (¹ J(Pt–Pt) ≈ 6345 Hz), whereas their ¹H and ¹³C NMR spectra contain four sets of signals for the protons and the carbon atoms of the heterocyclic and acetamidate ligands. The signals were assigned using the COSY, NOESY, and HSQC/ HMBC experiments and comparing the coordination shifts of the signals for the protons of heterocycles. These data allowed us to draw a conclusion that binuclear complexes 1 and 2 in solution have a head-to-head structure with nonequivalent platinum(III) atoms (coordination cores PtN₅ and PtN₃O₂), the axial-equatorial coordination of the bidentate heterocyclic molecules, and two bridging and two terminal acetamidate ligands.     

Sorption behavior of Co(II) on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the presence of humic acid

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The extent of sorption of divalent metal cations is controlled by a number of factors including cosorbing or complexing. In this work, the effects of pH, humic acid HA/Co(II) addition orders, ionic strength, concentration of HA, and foreign cations on the Co(II) sorption on γ-Al₂O₃ in the presence of HA were investigated. The sorption isotherms of Co(II) on γ-Al₂O₃ in the absence and presence HA were also studied and described by using S-type sorption model. The experimental results showed that the Co(II) sorption is strongly dependent on the pH values, concentration of HA, but independent of HA/Co(II) addition orders, ionic strength, and foreign cations in the presence of HA under our experimental conditions. The results also indicated that HA enhanced the Co(II) sorption at low pH, but reduced the Co(II) sorption at high pH. It was hypothesized that the significantly positive influence of HA at low pH on the Co(II) sorption on γ-Al₂O₃ was attributed to strong surface binding of HA on γ-Al₂O₃ and subsequently the formation of ternary surface complexes such as ≡S-OOC-R-(COO⁻) _x Co^2−x . Chemi-complexation may be the main mechanism of the Co(II) sorption on γ-Al₂O₃ in the presence of HA.     

Promoted porous Co<Subscript>3</Subscript>O<Subscript>4</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for ammonia decomposition

Transition metal catalysts have been considerably used for NH₃ decomposition because of the potential application in CO_x-free H₂ generation for fuel cells. However, most transition metal catalysts prepared via traditional synthetic approaches performed the inferior stability due to the agglomeration of active components. Here, we adopted an efficient method, aerosol-assisted self-assembly approach (AASA), to prepare the optimized cobalt-alumina (Co₃O₄-Al₂O₃) catalysts. The Co₃O₄-Al₂O₃ catalysts exhibited excellent catalytic performance in the NH3 decomposition reaction, which can reach 100% conversion at 600 °C and maintain stable for 72 h at a gaseous hourly space velocity (GHSV) of 18000 cm³ g_cat^?1 h^?1. The catalysts were characterized by various techniques including transmission electron microscope (TEM), scanning electron microscope (SEM), nitrogen sorption, temperature-programmed reduction by hydrogen (H₂-TPR), ex-situ/in-situ Raman and ex-situ/in-situ X-ray diffraction (XRD) to obtain the information about the structure and property of the catalysts. H₂-TPR and in-situ XRD results show that there is strong interaction between the cobalt and alumina species, which influences the redox properties of the catalysts. It is found that even a low content of alumina (10 at%) is able to stabilize the catalysts due to the adequate dispersion and rational interaction between different components, which ensures the high activity and superior stability of the cobalt-alumina catalysts.     

Preparation and characterization of supports with a synthesized layer of catalytic filamentous carbon: IV. Synthesis of carbon nanofibers on a Co/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst

A comparative study of the synthesis of carbon layers, including catalytic filamentous carbon, on the surface of various alumina modifications was made. The synthesis was performed by the pyrolysis of alkanes (a propane-butane mixture) on Co/Al₂O₃ supported catalysts. The texture characteristics (specific surface area and pore structure) of the starting supports and adsorbents with a synthesized carbon layer were studied. The surface morphology of Co/Al₂O₃ catalysts and the synthesized carbon deposits was studied by scanning electron microscopy. It was found that carbon nanofibers were formed only on the catalysts prepared by the homogeneous precipitation of Co compounds onto the surface of macroporous α-Al₂O₃, whereas carbon deposits on mesoporous aluminum oxides did not exhibit a pronounced fibrous structure. The applicability of C/Co/Al₂O₃ carbon-containing adsorbents to the immobilization of the nitrile hydratase enzyme and the preparation of a biocatalyst for acrylonitrile hydration to acrylamide was considered.     

Untersuchungen an Metallkatalysatoren. XI. Untersuchungen an eisen-, kobalt- und nickelmodifizierten Pt-η-Al2O3-Katalysatoren

Investigations on Metal Catalysts. XI. Investigations on Pt? η-Al₂O₃ Catalysts Modifieded by Iron, Cobalt, and Nickel Pt? Me? η-Al₂O₃ catalysts (M: Fe, Co, Ni) were characterized by magnetic investigations, reflectance spectra and determination of dispersity (chemisorption of CO, oxygen-hydrogen titration), respectively. The phase structure of platinum-rich catalysts is composed of a high degree by Pt₃Fe super-structure. All the Pt? Fe? η-Al₂O₃ catalysts contained Fe^III ions in octahedral symmetry. The dispersity of the metallic components is determined essentially by their phase structure.     

A comparative screening of the catalytic activity of nanocrystalline M<Superscript>II</Superscript>Zr<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>6</Subscript> ceramics in the one-pot synthesis of 1,6-diamino-4-aryl-2-oxo-1,2-dihydropyridine-3,5-dicarbonitrile derivatives

A four-component reaction of hydrazine hydrate, ethyl cyanoacetate, malononitrile, and aromatic aldehydes was achieved in the presence of nanocrystalline M^IIZr₄(PO₄)₆ ceramics (M^II: Mn, Fe, Co, Ni, Cu, Zn, Cd) as heterogeneous catalysts to produce N-amino-2-pyridones. The reactions were performed in the presence of different catalysts, and it is observed that CdZr₄(PO₄)₆ nanocrystallines are the best catalysts among those examined. Atom economy, excellent yields in short times, high catalytic activity, recycling of catalyst, and environmental benignity are some of the important features of this protocol.     

Effect of phenyl group on the structure and formation of transitional alumina from Al (OPh)<Subscript>3</Subscript>

The structure of freshly prepared Al(OPh)₃, its decomposition product, the hydrolyzed products and their structural evolution were investigated employing ²⁷Al MAS NMR spectroscopy, PXRD, TGA/DTA/DSC/FTIR techniques. In the ²⁷Al MAS NMR spectrum of the aluminium phenoxide, three signals with the chemical shift at 3.78, 21 and 45 ppm were observed. The chemical shift at 3.78 and 45 ppm revealed the presence of four and sixfold coordinated aluminum. The signal at 21 ppm corresponded to fivefold coordinated aluminium. When the aluminium phenoxide was directly decomposed in air at 600 °C, it resulted in amorphous product as evidenced from the PXRD pattern. The observed signals with chemical shifts at 10.1, 42, 73.6 ppm in the ²⁷Al MAS NMR spectrum indicated the presence of 6, 5 and 4 coordination for the aluminium atoms suggesting disordered transitional γ-alumina to be the product. The hydrolysis studies of Al(OPh)₃ with excess of water at 70 °C yielded bohemite (γ-AlOOH). The alumina obtained after dehydration at 600 °C was X-ray amorphous. The dehydrated product at 600 °C showed the presence of four and six coordinated aluminium atoms in the ²⁷Al MAS NMR spectrum confirming it to be ordered γ-Al₂O₃. Crystalline γ-Al₂O₃ was obtained on further heating at 800 °C.     

Promotional effect of cobalt addition on catalytic performance of Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> mixed oxide for diesel soot combustion

A series of Co-modified Ce_0.5Zr_0.5O₂ catalysts with different concentrations of Co (mass %: 0, 2, 4, 6, 8, 10) was investigated for diesel soot combustion. Ce_0.5Zr_0.5O₂ was prepared using the coprecipitation method and Co was loaded onto the oxide using the incipient wetness impregnation method. The activities of the catalysts were evaluated by thermogravimetric (TG) analysis and temperature-programmed oxidation (TPO) experiments. The results showed the soot combustion activities of the catalysts to be effectively improved by the addition of Co, 6 % Co/Ce_0.5Zr_0.5O₂ and that the 8 % Co/Ce_0.5Zr_0.5O₂ catalysts exhibited the best catalytic performance in terms of lower soot ignition temperature (T_i at 349°C) and maximal soot oxidation rate temperature (T_m at 358°C). The reasons for the improved activity were investigated by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), H₂ temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). These results revealed that the presence of Co could lower the reduction temperature due to the synergistic effect between Co and Ce, thereby improving the activity of the catalysts in soot combustion. The 6 % Co catalyst exhibited the best catalytic performance, which could be attributed to the greater amounts of Co³⁺ and surface oxygen species on the catalyst.     

First-principles simulations of the <Superscript>27</Superscript>Al and <Superscript>17</Superscript>O solid-state NMR spectra of the CaAl<Subscript>2</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript> glass

The local and medium-range structure of the 20CaO·20Al₂O₃·60SiO₂ glass generated by classical molecular dynamics simulations has been compared to NMR experiments by computing the ²⁷Al and ¹⁷O NMR parameters and NMR spectra from first-principles simulations. The calculation of the NMR parameters (chemical shielding and quadrupolar parameters), which are then used to simulate solid-state MAS and 3QMAS NMR spectra, is achieved by the gauge including projector augmented-wave and the projector augmented-wave methods on the DFT-PBE relaxed structure. The NMR spectra calculated with the present approach are found to be in excellent agreement with the experimental data, providing an unambiguous view of the local and medium-range structure of aluminosilicate glasses.     

Application of <Superscript>31</Superscript>P NMR for added polyphosphate determination in pork meat

Application of ³¹P NMR for qualitative and quantitative determination of added phosphorus compounds in meat samples is described. Furthermore, usefulness of the proposed method for monitoring of poly- and pyrophosphates hydrolysis in meat is discussed. Calibration curves based on the ³¹P resonance line areas were elaborated for Na₃P₃O₉, Na₅P₃O₁₀, Na₂H₂P₂O₇, and K₄P₂O₇ resulting in linearity (R ² = 0.9976, 0.9953, 0.9974, and 0.9524, respectively), detection limits (DL from 0.0018 mol L⁻¹ for Na₃P₃O₉ to 0.0070 mol L⁻¹ for K₄P₂O₇), and quantification limits (QL from 0.0060 mol L⁻¹ for Na₃P₃O₉ to 0.0234 mol L⁻¹ for K₄P₂O₇). The developed procedure was applied for laboratory prepared meat samples and compared with the standard UV-VIS method. The minimal sample pretreatment, obtained within-day precision (CV ≤ 2.0 %) and accuracy (as recovery ≥ 95 %) suggest ³¹P NMR as an alternative method of phosphorus determination in food analysis.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

Ethenolysis of C<Superscript>5+</Superscript> Alkenes as a Method for Synthesis of Propylene

Thermodynamic calculations demonstrated that, when any C⁵⁺ alkene is subjected to ethenolysis in an excess of ethylene on a catalyst providing the occurrence of a metathesis and positional isomerization, the main reaction product is propylene. The results of the calculations were confirmed experimentally for the cases of ethenolysis of hexene-1 and heptene-1 on Re₂O₇/SO₄^2-/ZrO₂–Al₂O₃ and Re₂O₇/B₂O₃–Al₂O₃ catalysts.     

Manifestation of electron-nuclear dynamics in <Superscript>59</Superscript>Co NQR spectra of a series of cobaltocenium derivatives

A coupling equation relating the quadrupole coupling constant (e² Qq _zz ) to the asymmetry parameter (η) of the electric field gradient for a series of cobaltocenium derivatives (⁵⁹Co NQR) is derived. The estimates of the correlation times of “slow” modulations of electron motions by tunneling processes lie in the range from 10⁻¹² to 10⁻¹⁴ s. This corresponds to the interval of the characteristic times of nuclear motions. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1919–1923, October, 2007.     

Catalytic Activity for Ammonia Synthesis of Iron Supported Catalysts Prepared from an Acid-modified λ-Al2O3 Method

Iron supported catalysts were prepared by impregnation of several acid-modified λ-Al₂O₃ samples with a K₄[Fe(CN)₆] aqueous solution. A concentration range between 0–20 mmole H⁺ added · g^?1λ-Al₂O₃ was used. The quantitative determination of the acid site and iron contents of the modified λ-Al₂O₃ samples was followed by UV spectrometry and F.A.A.S., respectively. An increasing final iron content of the catalysts with increasing acid site content of the support is observed. The catalytic activity for ammonia synthesis was followed at atmospheric pressure and 593 K (N₂/H₂ = 1/3). An increasing ammonia production per gram of catalyst with increasing protonation of the support was observed in the range 0–8 mmole H⁺ added · g^?1λ-Al₂O₃. The catalytic activity of iron supported catalysts prepared by this method was higher (up to twofold) that of a catalyst prepared by the incipient wetness method.     

Synthesis of high surface area transitional alumina from Al(OPh)<Subscript>3</Subscript>

Al(OPh)₃ involving sterically hindered phenyl groups on ultrasonic assisted micro hydrolysis yielded a mixture of boehmite and bayerite as deduced from the FTIR and powder X-ray diffraction pattern. In the thermogravimetric trace, the complete removal of decomposable moieties of the hydrolyzed gel occurred around 530 °C. Calcining the gel at temperatures 600, 700, 800 and 900 °C showed crystalline tetragonal δ-Al₂O₃ to be the product at 900 °C as deduced from FTIR, ²⁷Al NMR and PXRD techniques. δ-Al₂O₃ showed a surface area of 135 m²/g with rectangular bar like morphology with the sizes below 50 nm in the TEM images.     

Synthesis,Structure, and Magnetic Properties of a Twist Linear Tetranuclear Co<Stack><Subscript>2</Subscript><Superscript>III</Superscript></Stack>Ln<Stack><Subscript>2</Subscript><Superscript>III</Superscript></Stack> Complexes

A series of twist linear tetranuclear 3d–4f Co ₂ ^III Ln ₂ ^III [Ln = Gd (1), Tb (2), Dy (3), Ho (4), Er (5)] complexes have been prepared under solvothermal conditions and structurally characterized with Schiff-base ligand 2-(((2-hydroxy-3-methoxyphenyl)methylene)amino)-2-(hydroxymethyl)-1,3-propanediol (H₄L). The two central Co ions are linked by two alkoxyl oxygen atoms, and one Ln ion lying above and the other below the Co–Co dimer, form a twist linear array. The magnetic susceptibility studies reveal antiferromagnetic or ferromagnetic behaviour, whilst dynamic magnetic studies indicate no slow magnetic relaxation for these complexes.