Effects of La<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> on outward potassium channels in Vicia guard cells

Effects of La³⁺ and Eu³⁺ on outward potassium channels (K_out⁺) in Vicia guard cells have been studied by patch clamping technique. Extracellular La³⁺ inhibited K_out⁺ currents with a half-inhibition concentration (IC₅₀) of 81 μmol·L⁻¹. Interestingly, intracellular La³⁺ activated K_out⁺ currents at a free concentration of 1.13 × 10⁻¹⁴ mol·L⁻¹, and inhibited K_out⁺ currents at a free concentration of 5.86 × 10⁻¹⁴ mol·L⁻¹. Extracellular Eu³⁺ also activated K_out⁺ currents at concentrations of 10 μmol·L⁻¹ and 50 μmol·L⁻¹, and inhibited K_out⁺ currents at concentrations of more than 1 mmol·L⁻¹. The effects of La³⁺ and Eu³⁺ on K_out⁺ currents may contribute to regulation of the plant water status, which may be one of the mechanisms of the biological effect of rare earth elements.     

Effect of protonation and deprotonation on surface charge density of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>

The protonation and deprotonation of the Nb₂O₅ surface has been followed in order to understand the reactions of surface of this catalyst. The simultaneous potentiometric and conductometric titrations had been carried by using 50 mL of water suspension of Nb₂O₅ 40 g L⁻¹. The oxide was entirely deprotonated when adding 0.4 mL NaOH 1 mol L⁻¹, and later titrated with 0.1 mol L⁻¹. The titration had supplied K ₁ and K ₂ and the obtained values were 3.24 × 10⁻³ and 4.17 × 10⁻⁸, respectively. The zero point charge was pH_pcz = 4.94. The thermodynamic studies were carried out by using 50 mL of a 40 g/L Nb₂O₅ aqueous suspension with the pH adjusted to pH_PZC value. The suspension was titrated with 0.5 mol/L of HNO₃ or NaOH for protonation or deprotonation studies, respectively, in an isoperibol calorimeter CSC ISC-4300. Thus, the obtained thermodynamic values of the protonation and deprotonation of Nb₂O₅ were Δ_dp G = −37.60 kJ/mol, Δ_dp H = −23.72 kJ/mol and Δ_dpS = 47 J/(mol K).     

Effects of La<Superscript>3+</Superscript> on inward K<Superscript>+</Superscript> channels at plasma membrane in guard cells

The effects of La³⁺ on inward K⁺ channels at plasma membrane in vicia guard cells are investigated using the whole-cell patch-clamp recording mode. It is shown that La³⁺ on both sides of plasma membrane blocks inward K⁺ currents in a concentration-dependent manner, indicating that La³⁺ binding sites may exist on both sides of plasma membrane in guard cells in vicia. The dose response is fitted by the Michaelis-Menten relation characterized by an inhibitor constant K _i of 2.56±0.25 μmol · L⁻¹ (outside membrane) and (1.18±0.11)×10⁻¹⁵ mol · L⁻¹ (inside membrane). Intracellular La³⁺ has much stronger inhibitory effect on inward K⁺ currents than extracellular La³⁺ does, suggesting there may exist stronger binding sites inside membrane than outside membrane. Since ion channel activities of guard cells directly affect plant stomatal movement and water status, our results imply that rare earth elements might have potential practical values in regulating plant water status and strengthening plant drought endurance.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

PuPO<Subscript>4</Subscript>(cr,hyd.) Solubility Product and Pu<Superscript>3+</Superscript> Complexes with Phosphate and Ethylenediaminetetraacetic Acid

To determine the solubility product of PuPO₄(cr, hyd.) and the complexation constants of Pu(III) with phosphate and EDTA, the solubility of PuPO₄(cr, hyd.) was investigated as a function of: (1) time and pH (varied from 1.0 to 12.0), and at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration; (2) NaH₂PO₄ concentrations varying from 0.0001 mol⋅L⁻¹ to 1.0 mol⋅L⁻¹ and at a fixed pH of 2.5; (3) time and pH (varied from 1.3 to 13.0) at fixed concentrations of 0.00032 mol⋅L⁻¹ phosphate and 0.0004 mol⋅L⁻¹ or 0.002 mol⋅L⁻¹ Na₂H₂EDTA; and (4) Na₂H₂EDTA concentrations varying from 0.00005 mol⋅L⁻¹ to 0.0256 mol⋅L⁻¹ at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration and at pH values of approximately 3.5, 10.6, and 12.6. A combination of solvent extraction and spectrophotometric techniques confirmed that the use of hydroquinone and Na₂S₂O₄ helped maintain the Pu as Pu(III). The solubility data were interpreted using the Pitzer and SIT models, and both provided similar values for the solubility product of PuPO₄(cr, hyd.) and for the formation constant of PuEDTA⁻. The log ₁₀ of the solubility product of PuPO₄(cr, hyd.) [PuPO₄(cr, hyd.) \rightleftarrows\rightleftarrows Pu³⁺+PO₄^3-\mathrm{Pu}^{3+}+\mathrm{PO}_{4}^{3-}] was determined to be −(24.42±0.38). Pitzer modeling showed that phosphate interactions with Pu³⁺ were extremely weak and did not require any phosphate complexes [e.g., PuPO₄(aq), PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+}, Pu(H₂PO₄)₂⁺\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{2}^{+}, Pu(H₂PO₄)₃(aq), and Pu(H₂PO₄)₄^-\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{4}^{-}] as proposed in existing literature, to explain the experimental solubility data. SIT modeling, however, required the inclusion of PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+} to explain the data in high NaH₂PO₄ concentrations; this illustrates the differences one can expect when using these two different chemical models to interpret the data. Of the Pu(III)-EDTA species, only PuEDTA⁻ was needed to interpret the experimental data over a large range of pH values (1.3–12.9) and EDTA concentrations (0.00005–0.256 mol⋅L⁻¹). Calculations based on density functional theory support the existence of PuEDTA⁻ (with prospective stoichiometry as Pu(OH₂)₃EDTA⁻) as the chemically and structurally stable species. The log ₁₀ value of the complexation constant for the formation of PuEDTA⁻ [ Pu³⁺+EDTA^4-\rightleftarrows PuEDTA^-\mathrm{Pu}^{3+}+\mathrm{EDTA}^{4-}\rightleftarrows \mathrm{PuEDTA}^{-}] determined in this study is −20.15±0.59. The data also showed that PuHEDTA(aq), Pu(EDTA)₄^5-\mathrm{Pu(EDTA)}_{4}^{5-}, Pu(EDTA)(HEDTA)⁴⁻, Pu(EDTA)(H₂EDTA)³⁻, and Pu(EDTA)(H₃EDTA)²⁻, although reported in the literature, have no region of dominance in the experimental range of variables investigated in this study.     

Scalar-relativistic 5f-in-core pseudopotentials and core-polarization potentials for trivalent actinides: calibration calculations for Ac<Superscript>3+</Superscript>, Cm<Superscript>3+</Superscript> and Lr<Superscript>3+</Superscript> complexes

The performance of recently proposed 5f-in-core pseudopotentials for the trivalent actinides was investigated in calculations for model complexes An³⁺L ⁿ⁻ for three selected actinides (An³⁺ = Ac³⁺, Cm³⁺, Lr³⁺) and eight simple ligands with atoms from the first three periods of the table of elements (L ⁿ⁻ = F⁻, Cl⁻, OH⁻, SH⁻, CO, NH₂⁻, H₂O, H₂S, NH₃). Results of Hartree-Fock and Coupled Cluster with singles, doubles and perturbative triples calculations using basis sets of quadruple-zeta quality are compared to corresponding reference data obtained with scalar-relativistic energy-adjusted 5f-in-valence small-core pseudopotentials. The inclusion of core-polarization potentials in the 5f-in-core pseudopotential calculations and corrections of the basis set superposition error by the counterpoise correction leads to very good agreement between the 5f-in-valence and 5f-in-core pseudopotential results for bond lengths, bond angles and binding energies. Results from 5f-in-core pseudopotential calculations using different density functionals also show reasonable agreement with the more rigorous Coupled Cluster results. It is argued that the An 5f rather than the An f population is a useful criterion for the applicability of a specific An 5f-in-core pseudopotential.     

<Emphasis Type="Italic">S,S,S</Emphasis>-Tris(2-ethylhexyl) phosphorotrithioate as an effective solvent mediator for a mexiletine-sensitive membrane electrode

S,S,S-Tris(2-ethylhexyl) phosphorotrithioate proved to be an effective solvent mediator for constructing a mexiletine-sensitive membrane electrode in combination with an ion-exchanger, sodium tetrakis[3,5-bis(2-methoxyhexafluoro-2-propyl)phenyl]borate. Among a series of phosphorus compounds containing phosphoryl (P=O) groups, this solvent mediator showed the highest sensitivity to mexiletine in phosphate-buffered physiological saline containing 0.15 mol L⁻¹ NaCl and 0.01 mol L⁻¹ NaH₂PO₄/Na₂HPO₄ (pH 7.4), giving a detection limit of 2 × 10⁻⁶ mol L⁻¹ with a slope of 58.8 mV decade⁻¹. This is the best reported detection limit of any mexiletine-sensitive electrode developed to date. Owing to its high selectivity toward inorganic cations, the electrode was used to determine the level of mexiletine in saliva, the monitoring of which is quite effective for controlling the dose of this drug noninvasively. The mexiletine concentrations determined with the mexiletine-sensitive electrode compared favorably with those determined by high-performance liquid chromatography.     

[1-B<Subscript>10</Subscript>H<Subscript>9</Subscript>N<Subscript>2</Subscript>]<Superscript>−</Superscript> and [1-CB<Subscript>9</Subscript>H<Subscript>10</Subscript>]<Superscript>−</Superscript> anions: an attempt of quantum chemical calculations

Comparative quantum chemical calculations of structural parameters, chemical shifts of ¹¹B NMR spectra, and atomic charges in 10-vertex boron hydride anions [1-CB₉H₁₀]⁻ and [1-B₁₀H₉N₂]⁻ were performed using the restricted Hartree-Fock method with the 6-31++G(D,P) basis set. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1853–1855, September, 2007.     

Electrochemical study of Meldola's blue,methylene blue and toluidine blue immobilized on a SiO<Subscript>2</Subscript>/Sb<Subscript>2</Subscript>O3 binary oxide matrix obtained by the sol-gel processing method

SiO₂/Sb₂O₃ (SiSb), having a specific surface area, S _BET, of 788 m² g⁻¹, an average pore diameter of 1.9 nm and 4.7 wt% of Sb, was prepared by the sol-gel processing method. Meldola's blue (MeB), methylene blue (MB) and toluidine blue (TB) were immobilized on SiSb by an ion exchange reaction. The amounts of the dyes bonded to the substrate surface were 12.49, 14.26 and 22.78 μmol g⁻¹ for MeB, MB and TB, respectively. These materials were used to modify carbon paste electrodes. The midpoint potentials (E _m) of the immobilized dyes were −0.059, −0.17 and −0.18 V vs. SCE for SiSb/MeB, SiSb/MB and SiSb/TB modified carbon paste electrodes, respectively. A solution pH between 3 and 7 practically did not affect the midpoint potential of the immobilized dyes. The electrodes presented reproducible responses and were chemically stable under various oxidation-reduction cycles. Among the immobilized dyes, MeB was the most efficient to mediate the electron transfer for NADH oxidation in aqueous solution at pH 7. In this case, amperometric detection of NADH at an applied potential of 0 mV vs. SCE gives linear responses over the concentration range of 0.1–0.6 mmol L⁻¹, with a detection limit of 7 μmol L⁻¹.     

Synthesis of pyridyl derivatives for the future functionalization of biomolecules labeled with the fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> precursor

In this paper, we investigated three ligand systems, symmetric and asymmetric pyridyl-containing tridentate ligands (L¹NH₂ = (bis(2-pyridylmethyl)-amino)-ethylamine, L²H = (bis(2-pyridylmethyl)-amino)-acetic acid, L³NH₂ = [(6-amino-hexyl)-pyridyl-2-methyl-amino]-acetic acid) as bifunctional chelating agents for labeling biomolecules. These ligands reacted with the precursor fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and yielded the radioactive complexes fac-[¹⁸⁸Re(CO)₃L] (L = three ligands), which were identified by RP-HPLC. The corresponding stable rhenium tricarbonyl complexes (1–3) were allowed for macroscopic identification of the radiochemical compounds. ¹⁸⁸Re tricarbonyl complexes, with log P _o/w values ranging from −1.36 to −0.32, were obtained with yields of ≥90% using ligand concentrations within the 10⁻⁶−10⁻⁴M range. Challenge studies with cysteine and histidine revealed the high stability properties of these radioactive complexes, and biodistribution studies in normal mice indicated a fast rate of blood clearance and high rate of total radioactivity excretion, primarily through the renal-urinary pathway. In summary, these asymmetric and symmetric pyridyl-containing tridentate ligands are potent bifunctional chelators for the future biomolecules labeling of fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Solubility and hydrolysis of lutetium at different [Lu<Superscript>3+</Superscript>]<Subscript>initial</Subscript>

Solubility product (Lu(OH)_3(s)⇆Lu³⁺+3OH⁻) and first hydrolysis (Lu³⁺+H₂O⇆Lu(OH)²⁺+H⁺) constants were determined for an initial lutetium concentration range from 3.72·10⁻⁵ mol·dm⁻³ to 2.09·10⁻³ mol·dm⁻³. Measurements were made in 2 mol·dm⁻³ NaClO₄ ionic strength, under CO₂-free conditions and temperature was controlled at 303 K. Solubility diagrams (pLu_aq vs. pC _H) were determined by means of a radiochemical method using ¹⁷⁷Lu. The pC _H for the beginning of precipitation and solubility product constant were determined from these diagrams and both the first hydrolysis and solubility product constants were calculated by fitting the diagrams to the solubility equation. The pC _H values of precipitation increases inversely to [Lu³⁺]_initial and the values for the first hydrolysis and solubility product constants were log₁₀ β* _Lu,H = −7.92±0.07 and log₁₀ K*_sp,Lu(OH)3 = −23.37±0.14. Individual solubility values for pC _H range between the beginning of precipitation and 8.5 were S _Lu3+ = 3.5·10⁻⁷ mol·dm⁻³, S _Lu(OH)2+ = 6.2·10⁻⁷ mol·dm⁻³, and then total solubility was 9.7·10⁻⁷ mol·dm⁻³.     

Atmospheric deposition fluxes of <Superscript>7</Superscript>Be, <Superscript>210</Superscript>Pb and <Superscript>210</Superscript>Po at Xiamen,China

The atmospheric deposition fluxes of ⁷Be, ²¹⁰Pb and ²¹⁰Po at Xiamen were measured. The samples were collected from March 2004 to April 2005 and the sampling period was one month. The ⁷Be and ²¹⁰Pb activity were measured using HPGe γ-spectrometer after concentration using Fe(OH)₃ co-precipitation method. The ²¹⁰Po was counted with an α-spectrometer after the sample was digested and spontaneous plated onto a silver planchet. At Xiamen, the atmospheric deposition fluxes of ⁷Be varied between 0.11 and 2.93 Bq·m⁻²·d⁻¹ and the average was 1.64 Bq·m⁻²·d⁻¹; ²¹⁰Pb fluxes varied between 0.04 and 0.85 Bq·m⁻²·d⁻¹, and the average was 0.51 Bq·m⁻²·d⁻¹; ²¹⁰Po fluxes varied between 0.002 and 0.133 Bq·m⁻²·d⁻¹, and the average was 0.061 Bq·m⁻²·d⁻¹. There were positive correlations between the deposition fluxes of ⁷Be, ²¹⁰Pb or ²¹⁰Po and the amount of precipitation. The residence time of aerosols varied between 6.0 and 54.0 days with a mean of 27.1 days, which were calculated by ²¹⁰Po/²¹⁰Pb fluxes ratios.     

X-ray fluorescence determination of the FeO/Fe<Subscript>2</Subscript>O<Stack><Subscript>3</Subscript><Superscript>tot</Superscript></Stack> ratio in rocks

Chances for estimating the FeO/Fe₂O₃^tot ratio in rocks by the K and L series of X-ray fluorescence spectra are studied. The errors in the determination of FeO/Fe₂O₃^tot by the intensity ratio of the Kβ_2,5/Kβ_1,3 and Lβ/Lα_1,2 lines are compared. The relative standard deviation of determining FeO using a set of 49 standard samples of eruptive rocks varies in the range 5–16%, depending on the ratio FeO/Fe₂O₃^tot and the concentration of FeO. The better precision is attainable for a ratio above 0.45 at a FeO concentration in the range 5–15%. For samples of andesites and basalts, the relative standard deviation is better than 4%, for rocks of the granite family it is 23% at FeO concentrations below 3%. For samples of metamorphic and sedimentary rocks, the error of FeO determination is higher than that for the eruptive ones. For samples with the ratio FeO/Fe/Fe₂O₃^tot < 0.25, the deviation may exceed 30 rel %. In contrast to chemical analysis, the X-ray fluorescence method appears advantageous in time and cost of sample preparation and can be used for routine analysis in geochemical research.     

Initiation of ethylene polymerization on organoelement cations L<Subscript>2</Subscript>MMe<Superscript>+</Superscript> (M = Ge,Sn) with intramolecular coordination bonds: a theoretical study

The initiation of ethylene polymerization on L₂MMe⁺ cations (M = Ge, Sn; L = alkoxy, alkyl, phenoxyiminate, β-diketonate) was studied by the PBE/TZ2P density functional method. It was found that ethylene insertion into the M—C bond of the L₂MMe⁺ cations is energetically favorable (ΔG ⁰ = −7.6—−13.6 kcal mol⁻¹). The calculated energy barriers to reactions lie in a wide range 39.8 to 75.6 kcal mol⁻¹. The lowest energy barriers were obtained for tin cations bearing hexa- and heptafluoroacetylacetonate substituents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1338–1347, July, 2008.     

Complexes of Zr<Superscript>IV</Superscript> and Hf<Superscript>IV</Superscript> with monolacunary Keggin-and Dawson-type anions

The reactions of the tetranuclear hydroxo complexes [M₄(μ₂-OH)₈(H₂O)₁₆]⁸⁺ (M = Zr or Hf) with the lacunary Keggin-type ([α-PW₁₁O₃₉]⁷⁻) and Dawson-type ([α ₂-P₂W₁₇O₆₁]¹⁰⁻) phosphotungstates in aqueous solutions produce the sandwich polyoxometalate complexes [M(α-PW₁₁O₃₉)₂]¹⁰⁻ (M = Zr (1) or Hf (2)) and [M(α ₂-P₂W₁₇O₆₁)₂]¹⁶⁻ (M = Zr (3) and Hf (4)). The complexes were isolated and structurally characterized as salts with potassium and dimethylammonium cations. The zirconium and hafnium atoms have a square antiprismatic coordination environment (coordination number is 8). In all complexes, the mutual arrangement of the ligands corresponds to the syn isomer. Hafnium complexes 2 and 4 are the first structurally characterized polyoxometalate complexes of this metal. The structures of the resulting compounds were confirmed also by ³¹P NMR spectroscopy in solution. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 214–218, February, 2007.     

IR and <Superscript>31</Superscript>P NMR spectroscopic study of complexation of carbamoyl methyl phosphinates with U<Superscript>VI</Superscript> and Th<Superscript>IV</Superscript> in nitric acid solutions

The composition of complexes formed upon the extraction of U^VI and Th^IV nitrates with O-n-nonyl(N,N-dibutylcarbamoylmethyl) methyl phosphinate (L) from solutions of nitric acid without additional solvent was determined by ³¹P NMR spectroscopy. The structures of the complexes formed were studied by IR spectroscopy. Uranium(VI) is extracted from 3 and 5 M solutions of HNO₃ as the [UO₂(L)₂(NO₃)₂] complex, while thorium(IV) is extracted from 5 M HNO₃ as the [Th(L)₃(NO₃)₃]⁺·NO ₃ ⁻ complex. In both cases, ligand L has bidentate coordination. Ligand L contacts with 3 and 5 M nitric acid to form adducts L·HNO₃ and L· (HNO₃)₂, respectively. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2460–2464, November, 2005.     

Radiosynthesis and biodistribution of <Superscript>99m</Superscript>Tc-tricarbonyl complex of temafloxacin dithiocarbamate: a potential <Emphasis Type="Italic">Streptococci pneumoniae</Emphasis> infection radiotracer

Extraction of microamounts of cesium by nitrobenzene solutions of sodium dicarbollylcobaltate (Na⁺B⁻), potassium dicarbollylcobaltate (K⁺B⁻) and rubidium dicarbollylcobaltate (Rb⁺B⁻) in the presence of polypropylene glycol PPG 425 (L) has been investigated. The equilibrium data have been explained assuming that the complex species ML⁺ (M⁺ = Na⁺, K⁺, Rb⁺, Cs⁺; L = PPG 425) are present in the organic phase. The stability constants of the cationic complex species ML⁺ (M⁺ = Na⁺, K⁺, Rb⁺) in nitrobenzene saturated with water have been determined; they were found to increase in the series of Rb⁺ < K⁺ < Na⁺.