Surface modification of calcium sulfate whisker using thiol-ene click reaction and its application in reinforced silicone rubber

The hemihydrate calcium sulfate whisker (HCSW) was modified by γ-(methacryloxy)propyl trimethoxy silane (KH570) and trimethylolpropane tris(3-mercaptopropionate) via wet modification and thiol-ene click reaction, and then the unmodified and modified HCSW were added into α, ω-dihydroxy polysiloxane (DPS) matrix to prepare silicon rubber composites. After the dual-surface modification, the surface of HCSW was transformed to hydrophobic, the hydration of whisker was obviously improved, and the whisker dispersed more evenly in the polymer. The mechanical properties, dynamic mechanical properties, and the medium resistance of the silicone rubber composite were compared. The tensile test shows that the silicone rubber shows better mechanical properties after adding the modified whiskers, among which HCSW-KH570-SH has the most significant reinforcement effect. Moreover, DPS/HCSW-KH570-SH shows the best medium resistance in toluene, gasoline, and water. The addition of modified whiskers can improve the storage modulus of silicone rubber significantly, while DMA and DSC show that the addition of modified whiskers can reduce the glass transition temperature of silicone rubber. The bound rubber indicates that the interface interaction between HCSW-KH570-SH and silicone rubber is the best.     

氨基改性聚醚型聚硅氧烷的制备及其柔软性能研究

用含氢硅油、烯丙基缩水甘油醚、烯基聚醚的硅氢化加成产物-聚醚/环氧硅油与胺反应制得了氨基改性聚醚型聚硅氧烷（APEPS）,对其结构与性能进行了表征和研究。结果表明,含氢硅油分子量、有机胺结构、氨基改性聚醚型聚硅氧烷的硅含量对APEPS性能有影响。提高硅含量、增加氨值,可改善APEPS的柔软性与滑爽感,但对织物的吸湿性影响不大。     

The improvement of thermal stability and adhesion of silicone rubber composites modified by phenolic epoxy resin

The phenolic epoxy resin (F51) was siliconized by KH550 and the product was named as FKS. A hydroxyl-terminated polydimethylsiloxane (HTPDMS) which was modified with FKS was prepared. The siliconization reaction ensured a segment of siloxane on the side chain of F51. FT-IR and ¹H-NMR were employed to confirm the chemical structure of FKS. Morphology observations revealed that the enhancement of mechanical properties of the silicone rubber systems can be attributed to good compatibility between FKS and silicone rubber matrix. Thermogravimetric analysis showed that the residual yield at 800?°C of silicone rubber composites increased significantly when compared with that of neat HTPDMS. The mechanical properties demonstrated that tensile strength and elongation at break of silicone rubber system increased distinctly after modification, especially when 30 phr siliconized F51 were added to the silicone rubber. Shear strength was improved gradually with the addition of FKS. These above observations emphasize the vital effect of FKS on the behavior of modified HTPDMS.     

Effects of functional graphene oxide on the properties of phenyl silicone rubber composites

Graphene oxide (GO) was treated with two types of surfactants, i.e., silane coupling agent (KH550) and 4,4’-diphenylmethane diisocyanate (MDI), incorporated into phenyl silicone rubber at a low concentration (≤0.2 wt%), and cured by the room temperature vulcanized method. The effects of functional graphene oxide on the dielectric behaviour, thermal conductivity, optical transmittance and mechanical properties of the composites were investigated. The results showed that the particle size changed after modification and that the modified GO dispersed well in the phenyl silicone rubber. The composites with MDI modified GO exhibited better electrical insulation and lower light loss in the ultraviolet–visible region than the composites with KH550 modified GO. However, composites filled with KH550 modified GO present better thermal conductivity.     

Synthesis of novel silicone modified acrylic resins and their film properties

New silicone modified acrylic resins were synthesized and some of their film properties were investigated. At first, macromer (MC) was synthesized by the condensation reaction of the reactive polysiloxane intermediate (Z-6018) and 2-hydroxyethyl methacrylate (HEMA) in toluene as solvent at 110°C under nitrogen atmosphere. Then, MC was reacted with 2-dimethylaminoethyl methacrylate (DMAEMA) at different mole ratios (1:1, 1:3, 1:5) by using benzoyl peroxide as initiator in toluene to obtain novel silicone acrylic resins. These resins were characterized by Fourier Transform Infrared Spectrometry (FT-IR), and their thermal properties were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. The properties of the films prepared from these resins were determined. The results showed that these resins are thermally stable polymers and all films are flexible, semi-gloss and have excellent drying, adhesion properties. Copyright © 2007 John Wiley & Sons, Ltd.     

One-dimensional silicone nanofilaments

A decade ago one-dimensional silicone nanofilaments (1D-SNF) such as fibres and wires were described for the first time. Since then, the exploration of 1D-SNF has led to remarkable advancements with respect to material science and surface science: one-, two- and three-dimensional nanostructures of silicone were unknown before. The discovery of silicone nanostructures marks a turning point in the research on the silicone material at the nanoscale. Coatings made of 1D-SNF are among the most superhydrophobic surfaces known today. They are free of fluorine, can be applied to a large range of technologically important materials and their properties can be modified chemically. This opens the way to many interesting applications such as water harvesting, superoleophobicity, separation of oil and water, patterned wettability and storage and manipulation of data on a surface. Because of their high surface area, coatings consisting of 1D-SNF are used for protein adsorption experiments and as carrier systems for catalytically active nanoparticles.     

含改性硅微粉硅橡胶阻燃抑烟研究

为进一步提升硅橡胶(SR)的阻燃性能,利用硅烷偶联剂对硅微粉(SF)进行表面改性,以改性后的SF为阻燃剂,制备出SR样品。通过扫描电子显微镜(SEM)对改性前后SF表面形貌进行表征,通过极限氧指数(LOI)、水平垂直测试、锥形量热仪(CCT)、烟密度测试(SDT)等手段研究SR复合材料力学性能、阻燃性能、抑烟性能。研究表明:添加相同质量的SF和改性SF时,含改性SF的SR力学性能明显提升。其中,含21%(wt)改性SF/SR复合材料的力学、阻燃性能综合最佳。与纯SR相比,改性SF/SR复合材料的LOI增加了15%,热释放速率峰值降低86%,火灾增长指数降低了58%,最大烟密度降低43%。     

Effects of functional groups on surface pressure-area isotherms of hydrophilic silicone polymers

Organic/inorganic hybrid silicone polymers are increasingly used in cosmetics, inks and paints, and fabric care applications owing to their special Si-O bond characteristics. Because of the presence of organic as well as inorganic groups, they show the properties of both, and the presence of hydrophobic as well as hydrophilic character makes them behave like a hybrid polymer. Though they are widely used, the utilization of hydrophilically modified silicones on a large scale has mainly been empirical due to lack of fundamental knowledge about variation in their properties with systematic change in their structure. The choice of moieties for hydrophilic modification of silicones in most of the earlier works has been nonionic based on ethylene oxide and propylene oxide groups, however, very little is known about their ionic counterparts. The current work focuses on understanding the behavior of functionally grafted silicone polymers with respect to the variation in the hydrophilic part of the grafting chain. Hydrophilically grafted silicone polymers form monolayers at the air-water interface, which are stabilized by interactions of functional groups with water. The present work examined the effects of functional group modifications on the conformational behavior of chains at the interface. It was observed that the shape of the chain depends on the available area at the interface (or surface pressure), and there are conformational changes with an increase in the number of molecules per unit area. While a poly(dimethylsiloxanes) (PDMS) chain may undergo stretched to helix transition as predicted earlier, this may not be the case for hydrophilically grafted chains. On the basis of the shape of the surface pressure-area isotherm and correlation with the scaling theory, a gradation in hydrophilicity of functional groups and hence modified silicone chains at the air-water interface is predicted.     

有机硅弹性体表面生物相容性的研究进展

生物材料表面的生物相容性一直是生物材料研究领域倍受关注的问题.本文综述了对有机硅弹性体进行改性以提高其表面生物相容性的研究进展,介绍了各种常用的化学改性方法如本体接枝、等离子体处理、光化学诱导接枝、臭氧活化接枝以及硅氢加成反应、原子转移自由基聚合反应在有机硅弹性体表面改性中的应用.对改性后的有机硅弹性体表面抗非特异性蛋白质和血小板的能力等方面进行了评述,并进一步分析了有机硅弹性体表面化学改性的发展趋势和研究重点.     

聚苯基硅氧烷与聚甲基苯基硅氧烷改性环氧树脂的合成与性能比较

热熔法制备了一系列聚苯基甲氧基硅氧烷(PPMS)、聚甲基苯基甲氧基硅氧烷(PMPS)改性环氧树脂,通过环氧值、红外光谱(IR)分析表明聚硅氧烷接枝了E-20环氧树脂且环氧基保持不变.探讨了有机硅含量对改性树脂固化体系耐热性能及韧性的影响.实验表明,当E-20环氧树脂与PPMS、PMPS的质量比为7∶3时,改性树脂固化体系的耐热性能明显提高,玻璃化转变温度(Tg)为95.8、88.3℃,分别比改性前提高了9.0℃和1.5℃;质量损失50%时的热分解温度(Td)为476.5、487.8℃,分别比改性前提高了58.3℃和69.5℃.与ED-30固化体系相比,EPMS-30固化物的耐热性能,韧性等力学性能提高的更加明显,并且还具有优良的涂膜性能.     

有机硅改性苯丙乳液的研究进展

综述了有机硅改性苯丙乳液的机理、方法和聚合技术研究进展.介绍了物理共混法和化学改性法,重点阐述了化学改性法的最新研究进展,并展望了有机硅改性苯丙乳液的发展趋势.     

Study of properties of modified silicones at solid-liquid interface: fabric-silicone interactions

Silicones are special reagents that impart desired surface properties such as softness, bounciness and antiwrinkle properties to fabrics and related materials. Although these finishing processes have been practiced routinely, very little is known about the mechanisms involved in modification so that they could be improved. The current study was undertaken to develop basic understanding of the mechanisms responsible for surface modification of fibers using silicones. PDMS based amino silicone emulsions, quaternized to various degrees using dimethyl sulphate, were used in the present study. The electrokinetic properties of the modified silicones were studied as a function of pH. It was expected that the silicone emulsions would show a steady positive zeta potential throughout the pH range due to the quaternization by dimethyl sulphate. Surprisingly, a sudden drop in the zeta potential was observed around pH 8 with the samples turning hazy in the pH range of 8-10. Turbidimetric studies also showed a sudden increase in the turbidity in the pH range 8-10 where commercial processes also encounter problems. It was concluded that the emulsions were destabilized at pH 8-10 thus rendering them ineffective for surface treatment. In order to identify reason for the improvement in fabric properties, fiber structure was monitored using atomic force microscopy. It was observed that the treated fibers were far smoother, relaxed and uniform as compared to the untreated fibers. Thus the morphology of the fabric is modified in a specific way by treatment with specialty silicones.     

MODIFICATION OF CeO2 AND ITS EFFECT ON THE HEAT-RESISTANCE OF SILICONE RUBBER

By means of the wet chemical surface modification,the surface of CeO_2 was modified by vinyltrimethoxysilane (VTMS).Infrared spectroscopy was used to investigate the structure of the modified CeO_2 and the result showed that VTMS has been attached onto the surface of CeO_2.Effect of VTMS concentration on the active index of the modified CeO_2 was also studied,and the result indicated that the active index of the modified CeO_2 increases with the increase of VTMS concentration and the optimal concentratio...     

氟硅协同改性丙烯酸树脂的合成与防污性能研究

以甲基丙烯酸十二氟庚酯(FMA)、甲基丙烯酸聚二甲基硅氧烷基酯(SMA)、甲基丙烯酸甲酯、丙烯酸正丁酯、甲基丙烯酸正丁酯和丙烯酸乙酯为共聚单体,通过溶液聚合反应合成出侧链含有机氟、有机硅的丙烯酸树脂.通过核磁共振氢谱(1H-NMR)、核磁共振氟谱(19F-NMR)、红外光谱(FTIR)对聚合物的结构进行了表征.通过扫描电镜(SEM)、接触角测试和生物评价等方法,探讨了FMA、SMA含量对树脂涂膜性能的影响.结果表明氟硅改性的丙烯酸树脂比单独含氟或含硅改性的丙烯酸树脂具有更低的表面能,而且氟硅改性的丙烯酸树脂涂膜比商业化的聚硅氧烷涂膜具有更好的防污性能.     

Silica/Silicone Nanofilament Hybrid Coatings with Almost Perfect Superhydrophobicity

A facile method for the preparation of silica/silicone nanofilament hybrid coatings with almost perfect superhydrophobicity (contact angle=179.8° and sliding angle=1.3°) is presented. The coatings are obtained by dip‐coating of silica nanoparticles, followed by chemical vapor deposition of silicone nanofilaments. Predominant growth of silicone nanofilaments onto aggregated silica nanoparticles generates a two‐tier structure. The effect of silica nanoparticle size on the growth of silicone nanofilaments, along with their anti‐wetting properties and transparency are investigated in detail. Surface roughness and anti‐wetting properties can be simply regulated by controlling the size of silica nanoparticles.     

Evaluation of polymers based on a silicone backbone as pseudostationary phases for electrokinetic chromatography.

The feasibility of polymeric phases based on a silicone polymer backbone as pseudostationary phases for electrokinetic chromatography has been investigated. Silicone phases were studied because of the range of chemistries that could be developed based on these backbones, and because successful development of silicone phases would make it possible to employ much of the stationary phase chemistry developed in the past thirty years. Three silicone polymer structures have been investigated, but only one had sufficient aqueous solubility to permit application in electrokinetic chromatography. This phase was characterized by a variety of methods and was shown to be a mixture of partially hydrolyzed poly(bis-(3-cyanopropyl) siloxanes. When employed as a pseudostationary phase, this material provided selective and efficient separations. The electrophoretic mobility of the silicone polymer is greater than that of sodium dodecyl sulfate (SDS) micelles and poly(sodium 10-undecenylsulfate), providing an extended migration time range. A striking characteristic of the polymer is that the electrophoretic mobility is greater than typical electroosmotic mobilities. The chemical selectivity of the phase is significantly different from that of SDS micelles or poly(sodium 10-undecenylsulfate). The silicone phase is a more cohesive, basic and polar phase than SDS micelles. In buffers modified with a high concentration of organic solvents, the chromatographic properties of the silicone polymer are inferior to those of the poly(sodium 10-undecenylsulfate). The greatest limitation of silicone polymers for this application appears to be limited aqueous solubility, which will make it difficult to realize a family of such polymers with different chemical selectivities.     

Solid‐state bonding of silicone elastomer to glass by vacuum oxygen plasma,atmospheric plasma,and vacuum ultraviolet light treatment

We experimentally demonstrated that treating a silicone elastomer by a vacuum oxygen plasma, an atmospheric pressure plasma, and vacuum ultraviolet (VUV) radiation resulted in different surface modifications that gave different contact angles, contact angle aging, and bond strengths. The aim of this study was to assess whether high‐throughput surface modification techniques of atmospheric pressure plasma and VUV radiation have the potential to replace conventional oxygen plasma modification. Four silicone elastomers with different hardnesses were used as specimens. The surfaces of all four silicone elastomers were successfully modified from hydrophobic to hydrophilic and they were also bonded to glass surfaces by the three surface modification techniques, although considerable variations were observed in the surface hydrophobicity and the bonding properties. The results clearly reveal that atmospheric pressure plasma and VUV treatment have the potential to replace conventional oxygen plasma treatment. In particular, VUV irradiation produced the most hydrophilic surface that was preserved for a long time. Thus, VUV irradiation is the most promising technique for realizing high‐throughput surface modification and bonding of silicone elastomers. Copyright © 2012 John Wiley & Sons, Ltd.     

Rapid,metal‐free room temperature vulcanization produces silicone elastomers

Silicone room temperature vulcanization elastomers are usually formed through either a platinum‐catalyzed hydrosilylation or tin‐catalyzed moisture cure. In this article, we show that it is possible to create robust, transparent silicone elastomers without the need for metal catalysts. Hydrogen‐terminated silicone polymers are crosslinked by tri‐ or tetraalkoxysilane crosslinkers in a condensation process catalyzed by the presence of trispentafluorophenylborane catalyst to give elastomers and alkane by‐products. This procedure allows for very fast cure times (< 30 s to a tack free state): the process is more conveniently controlled with the addition of a small amount of solvent. Physical and mechanical properties are readily modified by control of the chain length of the starting polymer, the functionality and nature of the alkoxy group on the crosslinker. Organofunctional groups, useful for further polymer modification, can optionally be incorporated by judicious choice of readily available starting materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Silicone‐modified graphene oxide fillers via the Piers‐Rubinsztajn reaction

While graphene or graphene oxide can make significant improvements in the properties of a wide variety of polymeric materials, their incorporation can be challenged by incompatibility with the polymeric matrix. The modification of graphene oxide with silicones or silanes using the Piers‐Rubinsztajn reaction improves dispersibility in nonpolar materials, including organic solvents and silicone pre‐elastomers. A high loading (up to 10 wt %) of modified graphene oxide in silicone elastomers could be achieved, which resulted in enhanced mechanical performance and reduced gas permeability. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2379–2385     

TRIMETHYLSILYLATED SILICA AS RHEOLOGY MODIFIER FOR SILICONE RESINS

Trimethylsilylated silica was synthesized through hydrolytic condensation of tetraethoxysilane followed bytrimethylsilylation. Rheological properties of the silicone resin with trimethylsilylated silica as modifier were studied. Itturned out that the particle size of silica was important to the rheological behavior of the modified resin. Trimethylsilylatedsilica of medium particle size shows the strongest tendency of forming physical network in the resin.