Mass and NMR spectra of haplophyllidine and perforine and of their derivatives

Conclusions The mass and NMR spectra of haplophyllidine, perforine, and their derivatives have been studied. The influence of the open and cyclic forms of the molecular ion on the nature of the fragmentation has been discussed. The main routes of fragmentation of the compounds considered are due to the presence of substituents at C₈ and C₄.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 4, pp. 273–279, 1969     

Investigation of adhesion and mobility of polyurethane and epoxy-rubber glues and adhesives

The values of activation parameters in uncured and cured epoxy resins, rubbers, and blends thereof are investigated. The dependences of activation energy and adhesion strength of epoxy-rubber compositions on rubber content are determined. The correlation of adhesion and activation energy values for polyurethane rubber and epoxy-rubber compositions is shown.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

Crystal and molecular structure of aroyl- and acetylhydrazones of acet- and benzaldehydes

Aroyl- and acetylhydrazones of acet- (I) and benzaldehydes (IV) and benzoylhydrazones of acet- (II) and benzaldehydes (III) were studied by x-ray structural and quantum-chemical methods in order to establish their structures. Compund (I) was the EEZ structure in the crystal. Calculations and spectral data showed that the EEE form occurs in nonpolar solvents and in the gas phase. According to crystallographic data molecules (I)–(IV) are the E-isomers (relative to the N-N bond) and the hydrazone fragments are planar. Intermolecular N-H...O H-bonds from in the crystals. The data obtained suggest that the majority of acylhydrazones are conformationally rigid on dissolution although exceptions do occur. Apparently the reasons for the difference of acetyl- and benzoylhydrazones in electrocarboxylation reactions are electronic and not steric factors.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 75–81, January, 1991.     

Sulfur-containing aminoacid derivatives of cholchicine and cholchamine and derivatives of isothiouronium and mercaptoethylamine

New sulfur-containing derivatives of cholchicine and cholchamine with reduced toxicity and preserved pharmacological properties (cytostatic activity for human cancer cells) are prepared. The ability of the new compounds to affect radiation treatment is studied, enabling cholchicine derivatives with more significant radio-sensitizing properties to be found. Institute of Oncology and Radiology, Academy of Sciences of the Republic of Uzbekistan, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 640–650, September–October, 1999.     

Preconcentration and determination of ultratraces of lead and bismuth

The recovery and preconcentration of Pb(II) and Bi(III) by coupling ion-exchange and precomplexation with 1,2-dihydroxy-3,5-benzenedisulphonic acid and 3,3',4'-trihydroxyfuchsone-2'-sulphonic acid has been investigated. Metal recoveries at 0.1-mg l . concentrations are better than 99% in the presence of cationic, anionic and non-ionic detergents, or an organic sequestering agent such as NTA, and at high ionic strength. Experiments with radiotracers show total recovery even at 15-ng l . concentrations. In the light of the results the procedure is proposed as a simple and rapid analytical method to preconcentrate Pb(II) and Bi(III).     

Glycolate and Thioglycolate Complexes of Rhenium and Their Oxidative Elimination of Ethylene and of Glycol

Selenium dioxide and osmium tetroxide are effective reagents and catalysts for olefin oxidation, although, owing to their toxicity, reservations remain as to their applicability.^[1] We are therefore seeking more easily handled metal oxides that are soluble in organic solvents and that are as effective as osmium tetroxide in carrying out stereospecific cis hydroxylation of olefins. The rhenium(VII ) oxide 1 , which has meanwhile become readily accessible, is a favorable candidate.^[2]     

Simultaneous spectrophotometric determination of molybdenum and selenium,and of molybdenum and tellurium

A method is reported for the extraction of molybdenum-phenylfluorone by chloroform. The extraction is complete whether perchlorate ions are present or not but the extractions in the presence of perchlorate ions gave a somewhat more sensitive procedure for the spectrophotometric determination of molybdenum in the solvent phase as the molybdenum-phenylfluorone complex.A procedure is reported for the simultaneous determination of molybdenum and selenium, and molybdenum and tellurium. The method involves first the formation and solvent extraction of the molybdenum-phenylfluorone complex by chloroform in the presence of perchlorate ions, followed by determination of selenium in the remaining aqueous phase as selenium-diethyldithiocarbamate complex after solvent extraction with 2-ethyl-1-hexanol in the presence of perchlorate ions. A similar procedure is reported for the simultaneous determination of molybdenum and tellurium except that in the determination of molybdenum, the phenylfluorone complex is extracted by chloroform in the absence of perchlorate ions. Tellurium is determined in the remaining aqueous phase as tellurium-diethyldithiocarbamate complex after solvent extraction by 2-ethyl-1-hexanol solvent extraction in the presence of perchlorate ions.     

Facile N-arylation of amines and sulfonamides and o-arylation of phenols and arenecarboxylic acids

An efficient, transition-metal-free procedure for the N-arylation of amines, sulfonamides, and carbamates and O-arylation of phenols and carboxylic acids has been achieved by allowing these substrates to react with a variety of o-silylaryl triflates in the presence of CsF. Good to excellent yields of arylated products are obtained under very mild reaction conditions. This chemistry readily tolerates a variety of functional groups.     

Synthesis and structure of hydroxyisoxazolidines and derivatives of hydroxylamine and alkenals

The reactions of N-substituted hydroxylamines with alkenals serve as a method for the synthesis of the corresponding 2-substituted 3(5)-hydroxyisoxazolidines. The reaction pathway is determined by the nature of the substituent attached to the nitrogen atom. Ring-chain isomerism has been detected in these newly obtained compoundsTranslated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1270–1276, September, 1987.     

红霉素9,11-亚胺醚和乙腈分子加合物的合成和晶体结构

通过控制红霉素A (E)肟的贝克曼重排反应条件合成了一种关键中间体红霉素9,11-亚胺醚, 该化合物可与乙腈形成稳定的分子加合物(摩尔比为1∶1), 未见文献报道. 阐述了该化合物的合成、晶体结构、晶体学数据和结构参数. 该化合物为无色透明晶体, 属单斜晶系, 空间群P2₁. 对该加合物和已知化合物红霉素6,9-亚胺醚晶体结构的对照解析, 有助于对重排反应机理、异构化机理和两异构体还原差异性的分析, 对重排反应和还原反应起到积极的指导作用.     

Synthesis and structure of derivatives of azadithiapentaleneanthrone and isothiazoleanthrone

The reaction of N,N-dialkyl- or N,N-diaryl-1,5-diaminoanthrones with sulfur in a polar aprotic solvent in the presence of a base leads to the formation of 4-alkyl(aryl)amino-9-alky(aryl)-5H-anthra[1,9,8-bcde]-9-aza-1,10⁴-di-thiapentalen-5-ones. The reaction of the 1,5-diaminoanthrone, followed by methylation, leads to 7-amino-10-methylthio- and 7-amino-8,10-dimethylthio-6H-anthra[9,1-cd]isothiazol-6-ones. The structures of the last two compounds and of 4-methylamino-9-methylazadithiapentaleneanthrone were studied by x-ray crystallography. Elimination of the amino group occurs in each series. The structural features and the spectral characteristics of the new heterocyclic systems are discussed.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 417–425, March, 1990.     

Preparation and properties of metallacyclobutanes of nickel and palladium

Bis(phosphine)-3,3-dimethylnickela- and palladacyclobutanes have been prepared by intramolecular C-H insertion reaction of the corresponding dineopentyl metal complexes. Nickelacyclobutane complexes decompose when heated thereby undergoing competitive carbon-carbon bond cleavage to give isobutene and ethylene, with reductive elimination affording 1,1-dimethylcyclopropane and skeletal isomeri-zation of the metallacyclic ring yielding 3-methyl-1-butene, whereas the palladium analog gave no significant amounts of CC bond cleavage products.Added phos-phine was seen to have an effect on CC bond scission of nickelacyclobutane complexes. Nickelacyclobutane complexes in solution are thought to be in equilibrium with olefin-coordinated nickel-carbene complex on the basis of available experimental evidence from hydrogenolysis, carbene-trap reactions with olefins and reaction with carbon monoxide     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.     

The chemical transport of molybdenum and tungsten and of their dioxides and sulfides

Experiments have been made and an extensive thermodynamic discussion has taken place concerning the chemical transport of Mo, W, MoO₂, WO₂, MoS₂ and WS₂ in the presence of iodine. Efforts have been made to find the species via which Mo and W can migrate within the gas phase.Results: In each case the transport proceeds via the oxide iodides MoO₂J₂ and WO₂J₂ respectively, as already known for the dioxides. Thus the chemical transport of Mo, W, MoS₂ and WS₂ needs not only J₂ but also H₂O, usually liberated from the wall of the quartz ampoule.By means of J₂ + H₂O, the metals can be transported into the high temperature region of the ampoule (e.g., 1050 → 1150°C), whereas the transport of the sulfides proceeds in the opposite direction (e.g., 900 → 700°C).For the sulfide-transport the influence of the ratio of the transport agents $\text{J}{}_2\text{H}{}_2\text{O}$ has been discussed.The water content of the quartz glass out of which the ampoules are made is an important source for water, influencing the reactions.The addition of graphite which considerably lowers the H₂O partial pressure prevents any transport of the metals or the sulfides, which proves that the use of J₂ alone as a transport agent is insufficient in these cases.The gaseous iodides MoJ_x and WJ_z are without any importance under the experimental conditions used for the transport of the metals, their dioxides and sulfides.The partial pressures of MoO₂(OH)₂ and WO₂(OH)₂ under the experimental conditions chosen may usually be neglected. But in the system $\text{MoO}{}_2\text{H}{}_2\text{O}$ the transport via MoO₂(OH)₂ (1000 → 800°C) has been observed.The synthesis of MoO₂ and WO₂, starting with the elements or with powder of metal and trioxide is promoted by the addition of J₂. The reaction steps involved are discussed.     

Sizes of atoms and ions and covalency of bonding in molecules and crystals

A new system of atomic radii for the elements up to barium inclusive is constructed. Values of the radii are chosen so as the dependence between the dissociation energy of diatomic homonuclear molecules and a depth of atom overlapping is monotonous, and the scatter of data is minimal. The depth of overlapping is calculated as a difference between the sum of atomic radii and an experimental interatomic distance. Conclusions are made that: the radii of free atoms and ions are determined by the value of the electron density equal to 0.01 au; they considerably change in molecules and crystals only as a result of the charge transfer from cation to anion; covalent bonding is well described by the overlapping of free atoms (ions), confined by the surface of the given radius, and its energy depends upon the depth of overlapping of valence electron densities of atoms. A method of overlapping atoms is proposed for the approximate estimation of ionic sizes and charges in bound systems.     

Synthesis and characterization of norverapamil and quantification of verapamil and nor-verapamil in plasma

Verapamil is a calcium channel blocking agent which has found widespread use in the management of supraventricular tachyarrhythmias, angina pectoris, hypertrophic cardiomyopathy and hypertension. It is converted to its biologically active metabolite nor-verapamil in liver by cytochrome P450. In present communication, synthesis and characterization of nor-verapamil and development of reverse phase high performance liquid chromatographic method for the quantification of nor-verapamil along with verapamil in plasma has been carried out. The characterization of nor-verapamil was carried out using GC-MS, FT-IR and NMR spectroscopy. The separation was carried out with an isocratic JASCO RP-HPLC system using 5 μm KYA TECH HiQ Sil C₁₈ HS column (250 mm × 4.6 mm internal diameter) as a stationary phase and methanol: water: 0.01 M orthophosphoric acid: triethylamine [70: 30: 2: 0.5, v/v/v/v] as mobile phase. The flow rate was maintained at 1.0 mL/min and UV detection at 222 nm. The calibration for verapamil and nor-verapamil were found to be linear over concentration range of 50–300 ng/mL with correlation coefficient (n = 6) of 0.9995 and 0.9997, respectively. This method was validated according to USFDA guidelines. The method was found to be simple, accuare, precise sensitive and selective for the determination of verapamil and nor-verapamil in plasma and thus useful in bioequivalence studies of verapamil.     

Experimental and modeling study of breakage and restructuring of open and dense colloidal aggregates

In this work we present experimental and simulation analysis of the breakage and restructuring of colloidal aggregates in dilute conditions under shear. In order to cover a broad range of hydrodynamic and interparticle forces, aggregates composed of primary particles with two sizes, d(p) = 90 and 810 nm, were generated. Moreover, to understand the dependence of breakage and restructuring on the cluster structure, aggregates grown under stagnant and turbulent conditions, having substantially different initial internal structures with fractal dimension d(f) equal to 1.7 and 2.7, respectively, were used. The aggregates were broken by exposing them to a well-defined elongational flow produced in a nozzle positioned between two syringes. To investigate the evolution of aggregate size and morphology, respectively, the mean radius of gyration, , and d(f) were monitored during the breakup process using light scattering and confocal laser scanning microscopy. It was found that the evolution of aggregates' fractal dimension during breakage is solely controlled by their initial structure and is independent of the primary particles size. Similarly, the scaling of the steady-state vs the applied hydrodynamic stress is independent of primary particle size, however, depends on the history of aggregate structure. To quantitatively explain these observations, the breakage process was modeled using stokesian dynamics simulations incorporating DLVO and contact interactions among particles. The required flow-field for these simulations was obtained from computational fluid dynamics. The complex flow pattern was simplified by considering a characteristic stream line passing through the zone with the highest hydrodynamic stress inside the nozzle, this being the most critical flow condition experienced by the clusters. As the flow-field along this streamline was found to be neither pure simple shear nor pure extensional flow, the real flow was approximated as an elongational flow followed by a simple shear flow, with a stepwise transition between them. Using this approach, very good agreement between the measured and simulated aggregate size values and structure evolution was obtained. The results of this study show that the process of cluster breakup is very complex and strongly depends on the initial aggregate structure and flow-field conditions.     

Direct and sensitized photoprocesses of bis-benzimidazole dyes and the effects of surfactants and DNA

The photoprocesses of two bis-benzimidazole dyes, Hoechst 33258 (1) and an analog, where the phenolic group in p-position is replaced by an ethoxy group, Hoechst 33342 (2), were studied. For 1 and 2 in aqueous solution the quantum yield of fluorescence is strongly pH dependent; it decreases from a maximum value of phi f = 0.4 at pH 5 to phi f = 0.02 at pH 8. The effects of absorption and fluorescence, induced by sodium dodecyl sulfate surfactants below and above the critical micelle concentration and by double-stranded DNA, are interpreted by assuming that in bulk aqueous solution the dyes are essentially present as monomers. The strong enhancement of phi f, when the dye is bound to double-stranded DNA or solubilized in micelles, is suggested to be due to different environments at the benzimidazole rings. A quinoid intermediate with absorption maximum at 380 nm is formed for 1 at neutral pH using lambda exc = 248 or 308 nm. N-centered radicals of 1 or 2 in aqueous solution were observed by laser flash photolysis after electron ejection using wavelengths of 193 or 248 nm (mono and biphotonic, respectively). The precursor radical cation escaped observation but is transformed into the above radicals by deprotonation. Electron transfer from 1 in aqueous solution to triplet acetone takes place, and subsequent deprotonation is proposed to yield N-centered radicals. In addition, energy transfer from acetone to 1 is suggested, leading to T-T absorption with the maximum at 700 nm. The photoprocesses are discussed and the results compared with those known from pulse radiolysis.     

Kinetics and mechanisms of chlorine dioxide and chlorite oxidations of cysteine and glutathione

Chlorine dioxide oxidation of cysteine (CSH) is investigated under pseudo-first-order conditions (with excess CSH) in buffered aqueous solutions, p[H+] 2.7-9.5 at 25.0 degrees C. The rates of chlorine dioxide decay are first order in both ClO2 and CSH concentrations and increase rapidly as the pH increases. The proposed mechanism is an electron transfer from CS- to ClO2 (1.03 x 10(8) M(-1) s(-1)) with a subsequent rapid reaction of the CS* radical and a second ClO2 to form a cysteinyl-ClO2 adduct (CSOClO). This highly reactive adduct decays via two pathways. In acidic solutions, it hydrolyzes to give CSO(2)H (sulfinic acid) and HOCl, which in turn rapidly react to form CSO3H (cysteic acid) and Cl-. As the pH increases, the (CSOClO) adduct reacts with CS- by a second pathway to form cystine (CSSC) and chlorite ion (ClO2-). The reaction stoichiometry changes from 6 ClO2:5 CSH at low pH to 2 ClO2:10 CSH at high pH. The ClO2 oxidation of glutathione anion (GS-) is also rapid with a second-order rate constant of 1.40 x 10(8) M(-1) s(-1). The reaction of ClO2 with CSSC is 7 orders of magnitude slower than the corresponding reaction with cysteinyl anion (CS-) at pH 6.7. Chlorite ion reacts with CSH; however, at p[H+] 6.7, the observed rate of this reaction is slower than the ClO2/CSH reaction by 6 orders of magnitude. Chlorite ion oxidizes CSH while being reduced to HOCl, which in turn reacts rapidly with CSH to form Cl-. The reaction products are CSSC and CSO3H with a pH-dependent distribution similar to the ClO2/CSH system.