Design of a field flow preconcentration system for cadmium determination in seawater by flow-injection-atomic absorption spectrometry

A field flow preconcentration system (FFPS) for cadmium determination in seawater is described. Seawater samples are collected and preconcentrated in situ by passing them with a peristaltic pump through a minicolumn packed with Amberlite XAD-4 impregnated with the complexing agent 1-(2-pyridylazo)-2-naphthol. Thus, cadmium is complexed, retained, and preconcentrated without the interference of the saline matrix. Minicolumns loaded with cadmium are then returned to the laboratory where they are incorporated into a flow injection system and eluted with a small volume of an ethanolic solution of hydrochloric acid into the nebuliser-burner system of a flame atomic absorption spectrometer. The optimization of FFPS design is presented, and the stability and characteristics of the Cd-loaded minicolumns are studied in detail. The detection limit for Cd in seawater based on an enrichment factor of 1059 was 3.8 ng l(-1). The precision (R.S.D.) obtained for different amounts of cadmium was in the range 4.1-6.5% at the 25-100 ng l(-1) level. Analysis of certified reference materials (SLEW-3 and NASS-5) showed good agreement with the certified value. This procedure was applied to the determination of cadmium in seawater samples from Galicia (Spain).     

Optimization of a field flow pre-concentration system by experimental design for the determination of copper in sea water by flow-injection-atomic absorption spectrometry

A Plackett–Burman 2^7×3/32 design for seven factors (sample pH, sample flow rate, eluent volume, eluent concentration, eluent flow rate, ethanol percentage in the eluent and mini-column diameter) was carried out in order to find the significant variables affecting the field flow pre-concentration system (FFPS) and the flow injection elution manifold for copper determination in seawater samples by flame atomic absorption spectrometry. By using the optimized flow systems, seawater samples were collected and pre-concentrated in situ by passing them with a peristaltic pump through a mini-column packed with Amberlite XAD-4 impregnated with the complexing agent 4-(2-pyridylazo) resorcinol. Thus, copper is pre-concentrated without the interference of the saline matrix. Once in the laboratory, the mini-columns loaded with copper are incorporated into a flow injection system and eluted with a small volume of a 40% (v/v) ethanolic solution of 3 mol l⁻¹ hydrochloric acid into the nebulizer-burner system of a flame atomic absorption spectrometer. Analysis of certified reference materials (SLEW-3 and NASS-5) showed good agreement with the certified value.     

Field preconcentration of cadmium from seawater by using a minicolumn packed with Amberlite XAD-4/4-(2-pyridylazo) resorcinol and its flow-injection-flame atomic absorption spectrometric determination at the ng L(-1) Level

A flow injection analysis-flame atomic absorption spectrometric method for the determination of cadmium in seawater was developed with the aim of yielding a sensitive assay with a low detection limit. The method employs a field flow preconcentration technique involving a minicolumn containing Amberlite XAD-4 impregnated with the complexing agent 4-(2-pyridylazo) resorcinol. A Plackett-Burman 2(7)x3/32 design for seven factors (sample pH, sample flow rate, eluent volume, eluent concentration, eluent flow rate, ethanol percentage in the eluent and minicolumn diameter) was carried out in order to find the significant variables affecting the field continuous preconcentration system (FCPS) and the flow injection elution manifold for cadmium determination in seawater samples by flame atomic absorption spectrometry. Cadmium can be preconcentrated with an enrichment factor of 1053 for a sample volume of 200 mL and a preconcentration time of 57 min. In these experimental conditions, the method provides a linear relationship between absorbance and cadmium concentration in the range from 22-1900 ng L(-1), with a detection limit (3SD) of 6 ng L(-1). The precision (expressed as relative standard deviation) for eleven independent determinations reached values of 8.9-0.8% in cadmium solutions of 50-700 ng L(-1). Analysis of certified reference materials (SLEW-3 and NASS-5) showed good agreement with the certified value. This procedure was applied to the determination of cadmium in seawater from Galicia (Spain).     

Determination of ultratrace elements in natural waters by solid-phase extraction and atomic spectrometry methods

A study was carried out on the preconcentration of ultratrace amounts of cadmium, lead, manganese, copper and iron from high-salinity aqueous samples and determination by atomic spectrometry methods. Sample volume, amount of resin, loading flow rate, and elution volume were optimized in order to obtain the simultaneous preconcentration of all the analytes. Quantitative recoveries were obtained by using 200 mg of iminodiacetic resin with a loading flow rate of 2 mL min(-1), elution volume of 3 mL and sample volume of 50-450 mL. Only copper in seawater samples was not completely retained by the resin (60-70% recovery), due to unfavorable competition of iminodiacetic-active groups with organically bound metal.To quantify the metals in the eluates, two atomic spectrometry techniques were compared: electrothermal atomization atomic absorption spectrometry (ETAAS) and inductively coupled plasma-optical emission spectrometry (ICP-OES) with simultaneous CCD detection system. Both techniques are suitable for sample analysis with detection limits of 1.0, 4.7, 3.3, 6.8, and 53 ng L(-1) using ETAAS and 12, 122, 3.4, 17, and 21 ng L(-1) using ICP-OES for Cd, Pb, Mn, Cu, and Fe, respectively. Relative standard deviations of the procedures ranged from 1.7 to 14% at the sub-microg L(-1) concentration level. The accuracy of both methods was verified by analyzing various certified reference materials (river water, estuarine water, coastal and off-shore seawater).     

Minicolumn field sampling--preconcentration of trace zinc from seawater and its laboratory detection by flow injection flame atomic absorption spectrometry.

A simple field sampling-preconcentration method for zinc determination in seawater is described. Seawater was collected in situ by pumping it through a minicolumn packed with a chelating resin (Chelite P) connected to a field flow preconcentration system (FFPS). These packed minicolumns retain the dissolved zinc, and once are loaded with the analyte, they are returned to the laboratory where they are sequentially inserted into a flow injection system for on-line zinc elution with diluted hydrochloric acid and flame atomic absorption spectrometric detection. A factorial design has been used to optimize the FFPS and the flow injection elution process. The proposed method has a linear calibration range from 0.07 to at least 9.4 microg L(-1) of zinc, with a detection limit of 0.02 microg L(-1) and a throughput of 26 samples h(-1). Validation was carried out against certified reference water samples. This procedure has been successfully applied to the determination of Zn in seawater samples from Galicia (Spain).     

Thermospray flame furnace-AAS determination of copper after on-line sorbent preconcentration using a system optimized by experimental designs.

The present paper describes the on-line coupling of a flow-injection system to a new technique, thermospray flame furnace-AAS (TS-FF-AAS), for the preconcentration and determination of copper in water samples. Copper was preconcentrated onto polyurethane foam (PUF) complexed with ammonium O,O-diethyldithiophosphate (DDTP), while elution was performed using 80% (v/v) ethanol. An experimental design for optimizing the copper preconcentration system was established using a full factorial (2(4)) design without replicates for screening and a Doehlert design for optimization, studying four variables: sample pH, ammonium O,O-diethyldithiophosphate (DDTP) concentration, presence of a coil and the sampling flow rate. The results obtained from the full factorial and based on a Pareto chart indicate that only the pH and the DDTP concentration, as well as their interaction, exert influence on the system within a 95% confidence level. The proposed method provided a preconcentration factor of 65 fold, thus notably improving the detectability of TS-FF-AAS. The detection limit was 0.22 microg/dm3 and the precision, expressed as the relative standard deviation (RSD) for eight independent determinations, was 2.7 and 1.1 for copper solutions containing 5 and 30 microg/dm3, respectively. The procedure was successfully applied for copper determination in water samples.     

A flow injection system with ion-exchange for spectrophotometric determination of copper in rocks

A flow injection system is proposed for the spectrophotometric determination of copper in rocks. Samples are mineralized by treatment with hydrofluoric and perchloric acids and the solutions analysed after iron III precipitation. Copper is preconcentrated in a small CHELEX-100 resin column placed in the flow system, eluted with 2.5M nitric acid and further mixed with diethanoldithiocarbamate (DEDC) in basic medium. The coloured complex was monitored at 410 nm. With the proposed system, about 2-30 samples are run per hour with low reagent consumption. Beer's law is followed within 0.04 and 2.00, microg/ml. Precision and accuracy were assessed by using reference rock standards from USGS and GSJ with copper content as low as 0.4 microg/g with good precision and accuracy.     

Copper determination after FI on-line sorbent preconcentration using 1-nitroso-2-naphthol as a complexing reagent

The suitability of 1-nitroso-2-naphthol as a complexing agent for on-line preconcentration of copper using RP-C₁₈ material in a microcolumn with flow injection coupled with flame atomic absorption spectrometry (FI-FAAS) has been tested. Various parameters affecting complex formation, such as pH, sample flow rate, etc. and its elution into the nebulizer of FAAS were optimized. ¶A 5 × 10^–3 mol/L reagent was on-line mixed with aqueous sample solution acidified with 0.1% (v/v) nitric acid ¶(pH 3–4) and flowed through the microcolumn for 30 s. The adsorbed complexes in the microcolumn were eluted with ethanol in 10 s into the nebulizer of FAAS. A good precision (1.7% for 50 μg/L copper, n = 12), high enrichment factor (19) with detection limit (3σ) 2.0 μg/L, and sample throughput (90 h^–1) were obtained. The method was applied to certified reference materials seawater, mussel (biological), NBS-362 and NBS-364 (special low alloy steel), for the determination of copper, and the results were in good agreement with the certified values.     

Determination of trace amounts of germanium by flow injection hydride generation atomic fluorescence spectrometry with on-line coprecipitation

A method for the determination of trace amounts of germanium by hydride generation atomic fluorescence spectrometry (HG-AFS) associated on-line with flow injection (FI) coprecipitation preconcentration was described. The samples, each spiked with Ni(2+) (500 mugml(-1)), were introduced into the FI system using time-based injection, and mixed with a NaOH solution (50 gl(-1)). Germanium was preconcentrated by coprecipitation with the generated nickel hydroxide precipitate. The precipitate is subsequently eluted with 20% (v/v) phosphate acid solution and directed into the HG-AFS system. This method is simple and rapid. The detection limit (3sigma) was 0.11 mugl(-1) and the relative standard deviation was 5.6% (n=11) at the 10 mugl(-1) level.     

Preconcentration and flame atomic absorption spectrometry determination of cadmium in mussels by an on-line continuous precipitation-dissolution flow system

A rapid, sensitive, accurate and precise flame atomic absorption method is described for the determination of cadmium in mussels. The method is based on the continuous precipitation of cadmium as an ion pair between tetraiodocadmate and quinine and dissolution of the precipitate with ethanol. The metal can be preconcentrated 32-fold using 15 ml of sample solution by using a time-based technique at a sampling flow rate of 3.0 ml min(-1). The proposed method allows the determination of cadmium in the range 0.25-5.5 mug g(-1). The precision (relative standard deviation) obtained for different amounts of cadmium is in the range 1.5-4.7% at the 0.25-5.0 mug g(-1) level. The method demonstrates high tolerance to interferences, and the data obtained are in agreement with the certified value of a selected reference material. This procedure was applied to the determination of cadmium in mussel samples from estuaries in Galicia (Spain).     

用靛蓝胭脂红-H_2O_2流动注射化学发光法测定水样中的铜(Ⅱ)

在Na2CO3-NaHCO3缓冲溶液中,铜(Ⅱ)对H2O2氧化靛蓝胭脂红的反应具有明显的催化作用.基于此,结合流动注射技术,建立了测定铜(Ⅱ)的化学发光新方法;研究了影响化学发光强度的各种因素.结果表明,在最佳试验条件下,铜(Ⅱ)浓度在1.0×10-8"1.0×10-5 mol·L-1范围内与发光强度呈线性关系,检出限为4.1×10-10 mol·L-1.将该方法用于水样中铜(Ⅱ)的测定,结果满意.     

Cloud point extraction and spectrophotometric determination of Cu(II) in saturated saline solutions using 4-ethyl-1-(pyridin-2-yl)thiosemicarbazide

4-Ethyl-1-(pyridin-2-yl)thiosemicarbazide (HEPTS) has been used as a new complexing agent in cloud point extraction (CPE) for preconcentration and determination of trace amounts of copper in saturated saline medium. The chemical variables affecting the separation and determination processes were optimized. Copper(II) is preconcentrated using 0.05% (w/v) Triton X-114 and 10⁻⁴ M HEPTS at pH 6. The surfactant rich phase containing the complex was dissolved in 2 mL MeOH and determined spectrophotometrically. The calibration curve is linear in the 0.1–25 ng/mL copper range. The proposed method was applied successfully in the determination of copper in water and saturated saline samples. The reaction between CuSO₄ and HEPTS yields a deep-blue solid complex which is characterized by analytical and spectroscopic analyses.     

Copper determination after FI on-line sorbent preconcentration using 1-nitroso-2-naphthol as a complexing reagent

The suitability of 1-nitroso-2-naphthol as a complexing agent for on-line preconcentration of copper using RP-C₁₈ material in a microcolumn with flow injection coupled with flame atomic absorption spectrometry (FI-FAAS) has been tested. Various parameters affecting complex formation, such as pH, sample flow rate, etc. and its elution into the nebulizer of FAAS were optimized. ?A 5 × 10^–3 mol/L reagent was on-line mixed with aqueous sample solution acidified with 0.1% (v/v) nitric acid ?(pH 3–4) and flowed through the microcolumn for 30 s. The adsorbed complexes in the microcolumn were eluted with ethanol in 10 s into the nebulizer of FAAS. A good precision (1.7% for 50 μg/L copper, n = 12), high enrichment factor (19) with detection limit (3σ) 2.0 μg/L, and sample throughput (90 h^–1) were obtained. The method was applied to certified reference materials seawater, mussel (biological), NBS-362 and NBS-364 (special low alloy steel), for the determination of copper, and the results were in good agreement with the certified values. Received: 4 May 1999 / Revised: 25 June 1999 / Accepted: 29 June 1999     

On-line solid phase extraction system using PTFE packed column for the flame atomic absorption spectrometric determination of copper in water samples

A new flow injection on-line adsorption preconcentration system adapted to flame atomic absorption spectrometry (FAAS) for copper determination at the mug l(-1) level was developed. Polytetrafluoroethylene (PTFE) turnings packed in a mini-column were used as sorbent material. The copper ammonium pyrrolidine dithiocarbamate (APDC) complex was sorbed on the PTFE turnings, from which it could be eluted on-line instantly by isobutyl methyl ketone (IBMK) into the flame at a flow rate of 2.3 ml min(-1). The system was optimized and offered good performance characteristics with practically unlimited life time, greater flow rates and improved flexibility, as compared with other sorbent materials and the knotted reactor preconcentration systems. With 1 min preconcentration time, and a sample frequency of 40 h(-1), the enhancement factor was 340, which could be further improved by increasing the preconcentration time. The detection limit was c(L)=0.05 mug l(-1), and the precision was 1.5%, at the 2.0 mug l(-1) Cu level. The method has been applied successfully to the analysis of potable, river and seawater, and its accuracy was tested by the analysis of certified reference materials and by recovery measurements on spiked samples. No significant interferences exist from other substances usually occurring in natural water.     

Direct determination of cadmium and copper in seawater using a transversely heated graphite furnace atomic absorption spectrometer with Zeeman-effect background corrector

Methods for the direct determination of copper and cadmium in seawater were described using a graphite furnace atomic absorption spectrometer (GFAAS) equipped with a transversely heated graphite atomizer (THGA) and a longitudinal Zeeman effect background corrector. Ammonium nitrate was used as the chemical modifier to determine copper. The mixture of di-ammonium hydrogen phosphate and ammonium nitrate was used as the chemical modifier to determine cadmium. The matrix interference was removed completely so that a simple calibration curve method could be applied. This work is the first one with the capability of determining cadmium in unpolluted seawater directly with GFAAS using calibration curve based on simple aqueous standards. The accuracy of the methods was confirmed by analysis of three kinds of certified reference saline waters. The detection limits (LODs), with injection of a 20-mul aliquot of seawater sample, were 0.06 mug l(-1) for copper and 0.005 mug l(-1) for cadmium.     

Preconcentration and determination of trace elements with 2,6-diacetylpyridine functionalized Amberlite XAD-4 by flow injection and atomic spectroscopy

An on-line flow injection method for the direct determination of trace elements in environmental samples is described. A mini-column packed with 2,6-diacetylpyridine functionalized Amberlite XAD-4 was used to preconcentrate and separate 8 trace metals (Cd, Co, Cu, Mn, Ni, Pb, U and Zn) from water and extracts from solid samples. The metals were eluted with 0.1 M HNO(3) directly to the detection system (either inductively coupled plasma-mass spectrometry (ICP-MS) or flame atomic absorption spectrometry (FAAS)). As well as demonstrating that the resin could be used to preconcentrate ultra-trace analytes from natural waters, it was also shown to work well at a pH of 5.5. Therefore, after treatment of sample digests with sodium fluoride, samples that contain extremely large concentrations of iron may be analysed for trace analytes without the excess iron overloading the capacity of the resin. To this end, the analytes Cd, Co, Cu and Ni were preconcentrated from acid extracts of certified soil/sediment samples and then eluted with nitric acid to be determined on-line. Limits of detection (3sigma) of Cd = 0.33 microg l(-1), Co = 0.094 microg l(-1), Cu = 0.34 microg l(-1), Mn = 0.32 microg l(-1), Ni = 0.30 microg l(-1), Pb = 0.43 microg l(-1), U = 0.067 microg l(-1) and Zn = 0.20 microg l(-1) for the FI-ICP-MS system and Cd = 22 microg l(-1), Co = 60 microg l(-1), Cu = 10 microg l(-1) and Ni = 4.8 microg l(-1) for the FI-FAAS system were obtained. Analysis of certified reference materials showed good agreement with the certified values using the two methods.     

A low consumption air-segmented sequential injection vapor generation system for the determination of mercury by atomic absorption spectrometry

A sequential injection system for the determination of mercury by vapor generation atomic absorption spectrometry (VGAAS) using tetrahydoborate reductant was developed, characterized by prevention of sample and reagent mixing in the holding coil using small air segments and initiation of the vapor generation in a flow-through gas-liquid separator. Extremely small volumes of reductant of 15-30 mul (0.2-1.0% NaBH(4)) and sample acidity as low as 0.05 mol l(-1) HCl were sufficient for achieving performance similar to flow injection (FI) VGAAS systems. A sample throughput of 90 h(-1) was achieved with 400 mul samples with a precision of 2.0% RSD at 10 mug l(-1)Hg, and a detection limit of 0.1 mug l(-1) (3sigma). Reagent consumption was reduced by a factor of 25 in comparison to the FI-VGAAS system. Good agreement with the certified value was obtained for the determination of mercury in seawater in a standard reference sample.     

A method for preconcentrating Zr from large volumes of seawater using MnO(2)-impregnated fibers

A method for preconcentrating Zr from large volumes of seawater using MnO(2)-impregnated fibers is described. The manganese dioxide-impregnated fibers were synthesized from polypropylene cartridge filters by a redox reaction between KMnO(4) and MnCl(2). Seawater samples were introduced into an extraction system and Zr was extracted from the samples by the MnO(2)-impregnated fibers. Zirconium was recovered from the fibers through two steps of elution into aqueous solutions and measured by inductively coupled argon plasma atomic emission spectrometry. The average extraction efficiency for Zr was 59% on a single pass of 50-1000 l sample at flow rates of 8.1-15 l min(-1), and 100% on continuous circulation of 200 l sample at 15 l min(-1). The results indicate that Zr can be rapidly and easily preconcentrated onto MnO(2)-impregnated fibers from large volumes of seawater. This simple method can be applied to the preconcentration of trace dissolved Zr in natural water and removal of radiozirconium from radioactive waste fluid.     

Determination of copper, nickel, zinc, cobalt and manganese in seawater by chelation ion chromatography

Preconcentration and determination of trace elements in seawater by chelation ion chromatography (CIC) was studied. For the retention of metal ions (0.25–0.30 M), ammonium acetate (at pH 4.8–5.1) and macroporous iminodiacetate chelating resin were used. This system (CIC) permits trace and ultra-trace determination of metals in a variety of complex matrices, in particular those with a high content of alkali and alkaline earth metals. Detection limits range from 0.1 to 0.5 ng. Satisfactory results are obtained in the range 0.05–0.5 μg/1 when 60 ml of sample are preconcentrated. In this work the contents of zinc, copper, nickel, cobalt and manganese in seawater from the Venice lagoon are presented. The results obtained by chelation ion chromatography are compared with those obtained using preconcentration of metals with dithizone and ammonium pyrrolidinedithiocarbamate in chloroform and analysed by graphite furnace atomic absorption spectrometry.     

Application of Doehlert designs for optimisation of an on-line preconcentration system for copper determination by flame atomic absorption spectrometry

In the present paper, a system for on-line preconcentration and determination of copper by flame atomic absorption spectrometry (FAAS) was developed. It was based on solid phase extraction of copper(II) ions on a minicolumn of Amberlite XAD-2 loaded with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM). The optimisation process was carried out using Doehlert designs. Four variables (sampling flow rate, SR; elution flow rate, buffer concentration, BC; and pH) were regarded as factors in the optimisation. The parameter “sensitivity efficiency (SE)” proposed in this paper, and defined as the analytical signal obtained for an on-line enrichment system for a preconcentration time of 1 min was used as analytical response in the optimisation process. Using the established experimental conditions, the proposed on-line system allowed determination of copper with detection limit (3σ/S) of 0.23 μg l⁻¹, and a precision (repeatability), calculated as relative standard deviation (R.S.D.) of 3.9 and 3.7% for copper concentration of 5.00 and 20.00 μg l⁻¹, respectively. The preconcentration factor obtained is 62. The recovery achieved for copper determination in presence of several cations demonstrated that this has enough selectivity for analysis of food samples. The robustness of the proposed system was also evaluated. The accuracy was confirmed by analysis of the following certified reference materials (CRMs): Rice flour NIES 10a, Spinach leaves NIST 1570a, Apples leaves NIST 1515 and Orchard leaves NBS 1571. This procedure was applied for copper determination in natural food samples.