S-oxygenation of thiocarbamides I: Oxidation of phenylthiourea by chlorite in acidic media

The oxidation of 1-phenyl-2-thiourea (PTU) by chlorite was studied in aqueous acidic media. The reaction is extremely complex with reaction dynamics strongly influenced by the pH of reaction medium. In excess chlorite concentrations the reaction stoichiometry involves the complete desulfurization of PTU to yield a urea residue and sulfate: 2ClO2- + PhN(H)CSNH2 + H2O --> SO4(2-) + PhN(H)CONH2 + 2Cl- + 2H+. In excess PTU, mixtures of sulfinic and sulfonic acids are formed. The reaction was followed spectrophotometrically by observing the formation of chlorine dioxide which is formed from the reaction of the reactive intermediate HOCl and chlorite: 2ClO2- + HOCl + H+ --> 2ClO2(aq) + Cl- + H2O. The complexity of the ClO2- - PTU reaction arises from the fact that the reaction of ClO2 with PTU is slow enough to allow the accumulation of ClO2 in the presence of PTU. Hence the formation of ClO2 was observed to be oligooscillatory with transient formation of ClO2 even in conditions of excess oxidant. The reaction showed complex acid dependence with acid catalysis in pH conditions higher than pKa of HClO2 and acid retardation in pH conditions of less than 2.0. The rate of oxidation of PTU was given by -d[PTU]/dt = k1[ClO2-][PTU] + k2[HClO2][PTU] with the rate law: -d[PTU]/dt = [Cl(III)](T)[PTU]0/K(a1) + [H+] [k1K(a1) + k2[H+]]; where [Cl(III)]T is the sum of chlorite and chlorous acid and K(a1) is the acid dissociation constant for chlorous acid. The following bimolecular rate constants were evaluated; k1 = 31.5+/-2.3 M(-1) s(-1) and k2 = 114+/-7 M(-1) s(-1). The direct reaction of ClO2 with PTU was autocatalytic in low acid concentrations with a stoichiometric ratio of 8:5; 8ClO2 + 5PhN(H)CSNH2 + 9H2O --> 5SO4(2-) + 5PhN(H)CONH2 + 8Cl- + 18H+. The proposed mechanism implicates HOCl as a major intermediate whose autocatalytic production determined the observed global dynamics of the reaction. A comprehensive 29-reaction scheme is evoked to describe the complex reaction dynamics.     

S-oxygenation of thiocarbamides II: Oxidation of trimethylthiourea by chlorite and chlorine dioxide

The kinetics of the oxidation of a substituted thiourea, trimethylthiourea (TMTU), by chlorite have been studied in slightly acidic media. The reaction is much faster than the comparable oxidation of the unsubstituted thiourea by chlorite. The stoichiometry of the reaction was experimentally deduced to be 2ClO2- + Me2N(NHMe)C=S + H2O --> 2Cl- + Me2N(NHMe)C=O + SO4(2-) + 2H+. In excess chlorite conditions, chlorine dioxide is formed after a short induction period. The oxidation of TMTU occurs in two phases. It starts initially with S-oxygenation of the sulfur center to yield the sulfinic acid, which then reacts in the second phase predominantly through an initial hydrolysis to produce trimethylurea and the sulfoxylate anion. The sulfoxylate anion is a highly reducing species which is rapidly oxidized to sulfate. The sulfinic and sulfonic acids of TMTU exists in the form of zwitterionic species that are stable in acidic environments and rapidly decompose in basic environments. The rate of oxidation of the sulfonic acid is determined by its rate of hydrolysis, which is inhibited by acid. The direct reaction of chlorine dioxide and TMTU is autocatalytic and also inhibited by acid. It commences with the initial formation of an adduct of the radical chlorine dioxide species with the electron-rich sulfur center of the thiocarbamide followed by reaction of the adduct with another chlorine dioxide molecule and subsequent hydrolysis to yield chlorite and a sulfenic acid. The bimolecular rate constant for the reaction of chlorine dioxide and TMTU was experimentally determined as 16 +/- 3.0 M(-1) s(-1) at pH 1.00.     

Kinetics and mechanisms of chlorine dioxide and chlorite oxidations of cysteine and glutathione

Chlorine dioxide oxidation of cysteine (CSH) is investigated under pseudo-first-order conditions (with excess CSH) in buffered aqueous solutions, p[H+] 2.7-9.5 at 25.0 degrees C. The rates of chlorine dioxide decay are first order in both ClO2 and CSH concentrations and increase rapidly as the pH increases. The proposed mechanism is an electron transfer from CS- to ClO2 (1.03 x 10(8) M(-1) s(-1)) with a subsequent rapid reaction of the CS* radical and a second ClO2 to form a cysteinyl-ClO2 adduct (CSOClO). This highly reactive adduct decays via two pathways. In acidic solutions, it hydrolyzes to give CSO(2)H (sulfinic acid) and HOCl, which in turn rapidly react to form CSO3H (cysteic acid) and Cl-. As the pH increases, the (CSOClO) adduct reacts with CS- by a second pathway to form cystine (CSSC) and chlorite ion (ClO2-). The reaction stoichiometry changes from 6 ClO2:5 CSH at low pH to 2 ClO2:10 CSH at high pH. The ClO2 oxidation of glutathione anion (GS-) is also rapid with a second-order rate constant of 1.40 x 10(8) M(-1) s(-1). The reaction of ClO2 with CSSC is 7 orders of magnitude slower than the corresponding reaction with cysteinyl anion (CS-) at pH 6.7. Chlorite ion reacts with CSH; however, at p[H+] 6.7, the observed rate of this reaction is slower than the ClO2/CSH reaction by 6 orders of magnitude. Chlorite ion oxidizes CSH while being reduced to HOCl, which in turn reacts rapidly with CSH to form Cl-. The reaction products are CSSC and CSO3H with a pH-dependent distribution similar to the ClO2/CSH system.     

S-oxygenation of thiocarbamides. 3. Nonlinear kinetics in the oxidation of trimethylthiourea by acidic bromate

The oxidation of trimethylthiourea (TMTU) by acidic bromate has been studied. The reaction mimics the dynamics observed in the oxidation of unsubstituted thiourea by bromate with an induction period before formation of bromine. The stoichiometry of the reaction was determined to be 4:3, thus 4BrO(3)- + 3R(1)R(2)C=S+ 3H(2)O --> 4Br- + 3R(1)R(2)C=O + 3SO(4)(2-) + 6H+. This substituted thiourea is oxidized at a much faster rate than the unsubstituted thiourea. The oxidation mechanism of TMTU involves initial oxidations through sulfenic and sulfinic acids. At the sulfinic acid stage, the major oxidation pathway is through the cleavage of the C-S bond to form a reducing sulfur leaving group, which is easily oxidized to sulfate. The minor pathway through the sulfonic acid produces a very stable intermediate that is oxidized only very slowly to urea and sulfate. The direct reaction of aqueous bromine with TMTU was faster than reactions that form bromine, with a bimolecular rate constant of (1.50 +/- 0.04) x 10(2) M(-1) s(-1). This rapid reaction ensured that no oligooscillatory bromine formation was observed. The oxidation of TMTU was modeled by a simple reaction scheme containing 20 reactions.     

Kinetics and mechanisms of the reactions of hypochlorous acid,chlorine, and chlorine monoxide with bromite ion

The reaction between BrO2(-) and excess HOCl (p[H+] 6-7, 25.0 degrees C) proceeds through several pathways. The primary path is a multistep oxidation of HOCl by BrO(2)(-) to form ClO(3)(-) and HOBr (85% of the initial 0.15 mM BrO(2)(-)). Another pathway produces ClO(2) and HOBr (8%), and a third pathway produces BrO(3)(-) and Cl(-) (7%). With excess HOCl concentrations, Cl(2)O also is a reactive species. In the proposed mechanism, HOCl and Cl(2)O react with BrO(2)(-) to form steady-state species, HOClOBrO(-) and ClOClOBrO(-). Acid facilitates the conversion of HOClOBrO(-) and ClOClOBrO(-) to HOBrOClO(-). These reactions require a chainlike connectivity of the intermediates with alternating halogen-oxygen bonding (i.e. HOBrOClO(-)) as opposed to Y-shaped intermediates with a direct halogen-halogen bond (i.e. HOBrCl(O)O(-)). The HOBrOClO(-) species dissociates into HOBr and ClO(2)(-) or reacts with general acids to form BrOClO. The distribution of products suggests that BrOClO exists as a BrOClO.HOCl adduct in the presence of excess HOCl. The primary products, ClO(3)(-) and HOBr, are formed from the hydrolysis of BrOClO.HOCl. A minor hydrolysis path for BrOClO.HOCl gives BrO(3)(-) and Cl(-). An induction period in the formation of ClO(2) is observed due to the buildup of ClO(2)(-), which reacts with BrOClO.HOCl to give 2 ClO(2) and Br(-). Second-order rate constants for the reactions of HOCl and Cl(2)O with BrO(2)(-) are k(1)(HOCl) = 1.6 x 10(2) M(-1) s(-1) and k(1)(Cl)()2(O) = 1.8 x 10(5) M(-)(1) s(-)(1). When Cl(-) is added in large excess, a Cl(2) pathway exists in competition with the HOCl and Cl(2)O pathways for the loss of BrO(2)(-). The proposed Cl(2) pathway proceeds by Cl(+) transfer to form a steady-state ClOBrO species with a rate constant of k(1)(Cl2) = 8.7 x 10(5) M(-1) s(-1).     

Ab initio study of the ClO + NH2 reaction: prediction of the total rate constant and product branching ratios

The mechanism for ClO + NH2 has been investigated by ab initio molecular orbital and transition-state theory calculations. The species involved have been optimized at the B3LYP/6-311+G(3df,2p) level and their energies have been refined by single-point calculations with the modified Gaussian-2 method, G2M(CC2). Ten stable isomers have been located and a detailed potential energy diagram is provided. The rate constants and branching ratios for the low-lying energy channel products including HCl + HNO, Cl + NH2O, and HOCl + 3NH (X(3)Sigma(-)) are calculated. The result shows that formation of HCl + HNO is dominant below 1000 K; over 1000 K, Cl + NH2O products become dominant. However, the formation of HOCl + 3NH (X(3)Sigma(-)) is unimportant below 1500 K. The pressure-independent individual and total rate constants can be expressed as k1(HCl + HNO) = 4.7 x 10(-8)(T(-1.08)) exp(-129/T), k(2)(Cl + NH2O) = 1.7 x 10(-9)(T(-0.62)) exp(-24/T), k3(HOCl + NH) = 4.8 x 10(-29)(T5.11) exp(-1035/T), and k(total) = 5.0 x 10(-9)(T(-0.67)) exp(-1.2/T), respectively, with units of cm(3) molecule(-1) s(-1), in the temperature range of 200-2500 K.     

Nucleophile assistance of electron-transfer reactions between nitrogen dioxide and chlorine dioxide concurrent with the nitrogen dioxide disproportionation

The reaction of chlorine dioxide with excess NO(2)(-) to form ClO(2)(-) and NO(3)(-) in the presence of a large concentration of ClO(2)(-) is followed via stopped-flow spectroscopy. Concentrations are set to establish a preequilibrium among ClO(2), NO(2)(-), ClO(2)(-), and an intermediate, NO(2). Studies are conducted at pH 12.0 to avoid complications due to the ClO(2)(-)/NO(2)(-) reaction. These conditions enable the kinetic study of the ClO(2) reaction with nitrogen dioxide as well as the NO(2) disproportionation reaction. The rate of the NO(2)/ClO(2) electron-transfer reaction is accelerated by different nucleophiles (NO(2)(-) > Br(-) > OH(-) > CO(3)(2-) > PO(4)(3-) > ClO(2)(-) > H(2)O). The third-order rate constants for the nucleophile-assisted reactions between NO(2) and ClO(2) (k(Nu), M(-2) s(-1)) at 25.0 degrees C vary from 4.4 x 10(6) for NO(2-) to 2.0 x 10(3) when H(2)O is the nucleophile. The nucleophile is found to associate with NO(2) and not with ClO(2) in the rate-determining step to give NuNO(2)(+) + ClO(2)(-). The concurrent NO(2) disproportionation reaction exhibits no nucleophilic effect and has a rate constant of 4.8 x 10(7) M(-1) s(-1). The ClO(2)/NO(2)/nucleophile reaction is another example of a system that exhibits general nucleophilic acceleration of electron transfer. This system also represents an alternative way to study the rate of NO(2) disproportionation.     

2-Aminoisobutyric acid in Co(II) and Co(II)/Ln(III) chemistry: homometallic and heterometallic clusters

The synthesis and magnetic properties of 13 new homo- and heterometallic Co(II) complexes containing the artificial amino acid 2-amino-isobutyric acid, aibH, are reported: [Co(II)(4)(aib)(3)(aibH)(3)(NO(3))](NO(3))(4)·2.8CH(3)OH·0.2H(2)O (1·2.8CH(3)OH·0.2H(2)O), {Na(2)[Co(II)(2)(aib)(2)(N(3))(4)(CH(3)OH)(4)]}(n) (2), [Co(II)(6)La(III)(aib)(6)(OH)(3)(NO(3))(2)(H(2)O)(4)(CH(3)CN)(2)]·0.5[La(NO(3))(6)]·0.75(ClO(4))·1.75(NO(3))·3.2CH(3)CN·5.9H(2)O (3·3.2CH(3)CN·5.9H(2)O), [Co(II)(6)Pr(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Pr(NO(3))(5)]·0.41[Pr(NO(3))(3)(ClO(4))(0.5)(H(2)O)(1.5)]·0.59[Co(NO(3))(3)(H(2)O)]·0.2(ClO(4))·0.25H(2)O (4·0.25H(2)O), [Co(II)(6)Nd(III)(aib)(6)(OH)(3)(NO(3))(2.8)(CH(3)OH)(4.7)(H(2)O)(1.5)]·2.7(ClO(4))·0.5(NO(3))·2.26CH(3)OH·0.24H(2)O (5·2.26CH(3)OH·0.24H(2)O), [Co(II)(6)Sm(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Sm(NO(3))(5)]·0.44[Sm(NO(3))(3)(ClO(4))(0.5)(H(2)O)(1.5)]·0.56[Co(NO(3))(3)(H(2)O)]·0.22(ClO(4))·0.3H(2)O (6·0.3H(2)O), [Co(II)(6)Eu(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)OH)(4.87)(H(2)O)(1.13)](ClO(4))(2.5)(NO(3))(0.5)·2.43CH(3)OH·0.92H(2)O (7·2.43CH(3)OH·0.92H(2)O), [Co(II)(6)Gd(III)(aib)(6)(OH)(3)(NO(3))(2.9)(CH(3)OH)(4.9)(H(2)O)(1.2)]·2.6(ClO(4))·0.5(NO(3))·2.58CH(3)OH·0.47H(2)O (8·2.58CH(3)OH·0.47H(2)O), [Co(II)(6)Tb(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Tb(NO(3))(5)]·0.034[Tb(NO(3))(3)(ClO(4))(0.5)(H(2)O)(0.5)]·0.656[Co(NO(3))(3)(H(2)O)]·0.343(ClO(4))·0.3H(2)O (9·0.3H(2)O), [Co(II)(6)Dy(III)(aib)(6)(OH)(3)(NO(3))(2.9)(CH(3)OH)(4.92)(H(2)O)(1.18)](ClO(4))(2.6)(NO(3))(0.5)·2.5CH(3)OH·0.5H(2)O (10·2.5CH(3)OH·0.5H(2)O), [Co(II)(6)Ho(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·0.27[Ho(NO(3))(3)(ClO(4))(0.35)(H(2)O)(0.15)]·0.656[Co(NO(3))(3)(H(2)O)]·0.171(ClO(4)) (11), [Co(II)(6)Er(III)(aib)(6)(OH)(4)(NO(3))(2)(CH(3)CN)(2.5)(H(2)O)(3.5)](ClO(4))(3)·CH(3)CN·0.75H(2)O (12·CH(3)CN·0.75H(2)O), and [Co(II)(6)Tm(III)(aib)(6)(OH)(3)(NO(3))(3)(H(2)O)(6)]·1.48(ClO(4))·1.52(NO(3))·3H(2)O (13·3H(2)O). Complex 1 describes a distorted tetrahedral metallic cluster, while complex 2 can be considered to be a 2-D coordination polymer. Complexes 3-13 can all be regarded as metallo-cryptand encapsulated lanthanides in which the central lanthanide ion is captivated within a [Co(II)(6)] trigonal prism. dc and ac magnetic susceptibility studies have been carried out in the 2-300 K range for complexes 1, 3, 5, 7, 8, 10, 12, and 13, revealing the possibility of single molecule magnetism behavior for complex 10.     

Kinetics and mechanisms of S(IV) reductions of bromite and chlorite ions

The reaction of bromite with aqueous S(IV) is first order in both reactants and is general-acid catalyzed. The reaction half-lives vary from 5 ms (p[H+] 5.9) to 210 s (p[H+] 13.1) for 0.7 mM excess S(IV) at 25 degrees C. The proposed mechanism includes a rapid reaction (k(1) = 3.0 x 10(7) M(-1) s(-1)) between BrO(2)(-) and SO(3)(2-) to form a steady-state intermediate, (O(2)BrSO(3))(3-). General acids assist the removal of an oxide ion from (O(2)BrSO(3))(3-) to form OBrSO(3)(-), which hydrolyzes rapidly to give OBr(-) and SO(4)(2-). Subsequent fast reactions between HOBr/OBr(-) and SO(3)(2-) give Br(-) and SO(4)(2-) as final products. In contrast, the chlorite reactions with S(IV) are 5-6 orders of magnitude slower. These reactions are specific-acid, not general-acid, catalyzed. In the proposed mechanism, ClO(2)(-) and SO(3)H(-)/SO(2) react to form (OClOSO(3)H)(2)(-) and (OClOSO(2))(-) intermediates which decompose to form OCl(-) and SO(4)(2-). Subsequent fast reactions between HOCl/OCl(-) and S(IV) give Cl- and SO(4)(2-) as final products. SO(2) is 6 orders of magnitude more reactive than SO(3)H-, where k(5)(SO(2)/ClO(2)(-)) = 6.26 x 10(6) M(-1) s(-1) and k(6)(SO(3)H(-)/ClO(2)(-)) = 5.5 M(-1) s(-1). Direct reaction between ClO(2)(-) and SO(3)(2-) is not observed. The presence or absence of general-acid catalysis leads to the proposal of different connectivities for the initial reactive intermediates, where a Br-S bond forms with BrO(2)(-) and SO(3)(2-), while an O-S bond forms with ClO(2)(-) and SO(3)H-.     

An ab initio study toward understanding the mechanistic photochemistry of acetamide

The potential energy surfaces for CH(3)CONH(2) dissociation into CH(3) + CONH(2), CH(3)CO + NH(2), CH(3)CN + H(2)O, and CH(3)NH(2) + CO in the ground and lowest triplet states have been mapped with DFT, MP2, and CASSCF methods with the cc-pVDZ and cc-pVTZ basis sets, while the S(1) potential energy surfaces for these reactions were determined by the CASSCF/cc-pVDZ optimizations followed by CASSCF/MRSDCI single-point calculations. The reaction pathways leading to different photoproducts are characterized on the basis of the computed potential energy surfaces and surface crossing points. A comparison of the reactivity among HCONH(2), CH(3)CONH(2), and CH(3)CONHCH(3) has been made, which provides some new insights into the mechanism of the ultraviolet photodissociation of small amides.     

Conversion of phenyl-substituted cyclopentadienes to pyrylium cations

Phenyl-substituted cyclopentadienes are proved to form phenylated pyrylium cations in the presence of silver(I) perchlorate by insertion of an oxygen atom into the cyclopentadiene-ring. Three phenylated pyrylium compounds, [(Ph(5)C(5)O(+))(ClO(4)(-))](2)(CH(2)Cl(2)) (1), Ag(ClO(4))(H(2)O)(Ph(4)HC(5)O(+)) (ClO(4)(-)) (2), and (Ph(3)H(2)C(5)O(+))(ClO(4)(-)) (3) have been synthesized and characterized. A possible reaction pathway and formation mechanism of the pyrylium cation are proposed and discussed.     

Effect of chloride ion on the kinetics and mechanism of the reaction between chlorite ion and hypochlorous acid

The effect of chloride ion on the chlorine dioxide formation in the ClO 2 (-)-HOCl reaction was studied by following .ClO 2 concentration spectrophotometrically at pH 5-6 in 0.5 M sodium acetate. On the basis of the earlier experimental data collected without initially added chloride and on new experiments, the earlier kinetic model was modified and extended to interpret the two series of experiments together. It was found that the chloride ion significantly increases the initial rate of .ClO 2 formation. At the same time, the .ClO 2 yield is increased in HOCl but decreased in ClO 2 (-) excess by the increase of the chloride ion concentration. The two-step hydrolysis of dissolved chlorine through Cl 2 + H 2O left harpoon over right harpoon Cl 2OH (-) + H (+) and Cl 2OH (-) left harpoon over right harpoon HOCl + Cl (-) and the increased reactivity of Cl 2OH (-) compared to HOCl are proposed to explain these phenomena. It is reinforced that the hydrolysis of the transient Cl 2O 2 takes place through a HOCl-catalyzed step instead of the spontaneous hydrolysis. A seven-step kinetic model with six rate parameters (constants and/or ratio of constants) is proposed on the basis of the rigorous least-squares fitting of the parameters simultaneously to 129 absorbance versus time curves measured up to approximately 90% conversion. The advantage of this method of evaluation is briefly outlined.     

General-acid-catalyzed reactions of hypochlorous acid and acetyl hypochlorite with chlorite ion

The rate of oxidation of ClO2- by HOCl is first order in each reactant and is general-acid catalyzed. In the initial steps of the proposed mechanism, a steady-state intermediate, HOClOClO-, forms (k1 = 1.6 M-1 s-1) and undergoes general-acid (HA)-catalyzed reactions (k2HA) to generate a metastable intermediate, ClOClO. Values of k2HA/k-1 are 1.6 x 10(4) M-1 (H3O+), 20 M-1 (HOAc), and 8.5 M-1 (H2PO4-). Subsequent competitive reactions of ClOClO with ClO2- (k3) to give 2ClO2 and with OH- (k4OH) and other bases (k5B) to give ClO3- are very rapid. The relative yields of these products give k4OH/k3 = 1.3 x 10(5), k5HPO4/k3 = 0.20, and k5OAc/k3 = 0.06. At low pH and low buffer concentrations, the apparent yield of ClO2, based on 2ClO2 per initial HOCl, reaches 140%. This anomaly is attributed to the induced disproportionation of ClO2- by ClOClO to give ClO3- and additional HOCl. A highly reactive intermediate, ClOCl(O)OClO-, is proposed that can undergo Cl-O bond cleavage to give 2ClO2 + Cl- via one path and ClO3- + 2HOCl via another path. The additional HOCl recycles in the presence of excess ClO2- to give more ClO2. Ab initio calculations show feasible structures for the proposed reaction intermediates. Acetic acid has a second catalytic role through the formation of acetyl hypochlorite, which is much more reactive than HOCl in the transfer of Cl+ to ClO2- to form ClOClO.     

Three autocatalysts and self-inhibition in a single reaction: a detailed mechanism of the chlorite-tetrathionate reaction

The chlorite-tetrathionate reaction has been studied spectrophotometrically in the pH range of 4.65-5.35 at T = 25.0 +/- 0.2 degrees C with an ionic strength of 0.5 M, adjusted with sodium acetate as a buffer component. The reaction is unique in that it demonstrates autocatalysis with respect to the hydrogen and chloride ion products and the key intermediate, HOCl. The thermodynamically most-favorable stoichiometry, 2S(4)O(6)2- + 7ClO2- + 6H2O --> 8SO(4)2- + 7Cl- + 12H+, is not found. Under our experimental conditions, chlorine dioxide, the chlorate ion, or both are detected in appreciable amounts among the products. Initial rate studies reveal that the formation of chlorine dioxide varies in an unusual way, with the chlorite ion acting as a self-inhibitor. The reaction is supercatalytic (i.e., second order with respect to autocatalyst H+). The autocatalytic behavior with respect to Cl- comes from chloride catalysis of the chlorite-hypochlorous acid and hypochlorous acid-tetrathionate subsystems. A detailed kinetic study and a model that explains this unusual kinetic behavior are presented.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Kinetics and mechanisms of chlorine dioxide oxidation of tryptophan

The reactions of aqueous ClO2 (*) and tryptophan (Trp) are investigated by stopped-flow kinetics, and the products are identified by high-performance liquid chromatography (HPLC) coupled with electrospray ionization mass spectrometry and by ion chromatography. The rates of ClO2 (*) loss increase from pH 3 to 5, are essentially constant from pH 5 to 7, and increase from pH 7 to 10. The reactions are first-order in Trp with variable order in ClO2 (*). Below pH 5.0, the reactions are second- or mixed-order in [ClO2 (*)], depending on the chlorite concentration. Above pH 5.0, the reactions are first-order in [ClO2 (*)] in the absence of added chlorite. At pH 7.0, the Trp reaction with ClO2 (*) is first-order in each reactant with a second-order rate constant of 3.4 x 10(4) M(-1) s(-1) at 25.0 degrees C. In the proposed mechanism, the initial reaction is a one-electron oxidation to form a tryptophyl radical cation and chlorite ion. The radical cation deprotonates to form a neutral tryptophyl radical that combines rapidly with a second ClO 2 (*) to give an observable, short-lived adduct ( k obs = 48 s(-1)) with proposed C(H)-OClO bonding. This adduct decays to give HOCl in a three-electron oxidation. The overall reaction consumes two ClO2 (*) per Trp and forms ClO2- and HOCl. This corresponds to a four-electron oxidation. Decay of the tryptophyl-OClO adduct at pH 6.4 gives five initial products that are observed after 2 min and are separated by HPLC with elution times that vary from 4 to 17 min (with an eluent of 6.3% CH 3OH and 0.1% CH 3COOH). Each of these products is characterized by mass spectrometry and UV-vis spectroscopy. One initial product with a molecular weight of 236 decays within 47 min to yield the most stable product, N-formylkynurenine (NFK), which also has a molecular weight of 236. Other products also are observed and examined.     

Hydrogen/chlorine exchange reactions of gaseous carbanions

Gas-phase reactions of three typical carbanions CH(2)NO(2)(-), CH(2)CN(-), and CH(2)S(O)CH(3)(-) with the chloromethanes CH(2)Cl(2), CHCl(3), and CCl(4), examined by tandem mass spectrometry, show a novel hydrogen/chlorine exchange reaction. For example, reaction between the nitromethyl anion CH(2)NO(2)(-) and carbon tetrachloride CCl(4) forms the ion CHClNO(2)(-). The suggested reaction mechanism involves nucleophilic attack by CH(2)NO(2)(-) at the chlorine of CCl(4) followed by proton transfer within the resulting complex [CH(2)ClNO(2) + CCl(3)(-)] to form CHClNO(2)(-) and CHCl(3). Two other carbanions CH(2)CN(-) and CH(2)S(O)CH(3)(-) also undergo the novel hydrogen/chlorine exchange reactions with CCl(4) but to a much smaller extent, their higher nucleophilicities favoring competitive nucleophilic attack reactions. Proton abstraction is the exclusive pathway in the reactions of these carbanions with CHCl(3). While CH(2)CN(-) and CH(2)S(O)CH(3)(-) promote mainly proton abstraction and nucleophilic displacement in reactions with CH(2)Cl(2), CH(2)NO(2)(-) does not react.     

The use of chlorophenol red for the selective determination of chlorine dioxide in drinking water

In recent years, the use of chlorine dioxide as an alternative disinfectant for drinking water has become increasingly attractive. As a result, an accurate method for the determination of mg l(-1) concentrations of chlorine dioxide is needed. Improvements to chlorophenol red (CPR) spectrophotometry result in a selective method for ClO(2) with few interferences. CPR selectively reacts with 0.1-1.9 mg l(-1) ClO(2) at pH 7, yielding a linear response (0.9994) with a limit of detection of 0.12 mg l(-1) ClO(2). Several species, ClO(2)(-), ClO(3)(-), NH(2)Cl, and free available chlorine (FAC), were studied as potential interferents using this method. There was found to be less than 2% interference due to 1.38 mg l(-1) ClO(2)(-), 9.87 mg l(-1) ClO(3)(-1), and 5.31 mg l(-1) NH(2)Cl. The interference from up to 1.19 mg l(-1) FAC was 3.7% and could be further reduced by the addition of oxalic acid, sodium cyclamate or thioacetamide.     

Kinetics and mechanism of the oxidation of sulfite by chlorine dioxide in a slightly acidic medium

The sulfite-chlorine dioxide reaction was studied by stopped-flow method at I = 0.5 M and at 25.0 +/- 0.1 degrees C in a slightly acidic medium. The stoichiometry was found to be 2 SO(3)(2-) + 2.ClO(2) + H(2)O --> 2SO(4)(2) (-) + Cl(-) + ClO(3)(-) + 2H(+) in *ClO(2) excess and 6SO(3)(2-) + 2*ClO(2) --> S(2)O(6)(2-) + 4SO(4)(2-) + 2Cl(-) in total sulfite excess ([S(IV)] = [H(2)SO(3)] + [HSO(3)(-)] + [SO(3)(2-)]). A nine-step model with four fitted kinetic parameters is suggested in which the proposed adduct *SO(3)ClO(2)(2-) plays a significant role. The pH-dependence of the kinetic traces indicates that SO(3)(2-) reacts much faster with *ClO(2) than HSO(3)(-) does.     

Two diphosphonate-functionalized asymmetric polyoxomolybdates with catalytic activity for oxidation of benzyl alcohol to benzaldehyde

Two asymmetric polyoxomolybdates Na(6){Mo(2)O(5)[(Mo(2)O(6))NH(3)CH(2)CH(2)CH(2)C(O)(PO(3))(2)](2)}·16H(2)O (1) and (NH(4))(7)Na{MoO(2)[(Mo(2)O(6))NH(3)CH(2)CH(2)CH(2)C(O)(PO(3))(2)]}(4)·H(2)O (2) have been synthesized by the reactions of alendronic acid with molybdate. Structure analysis revealed that the polyoxoanions 1 and 2 can be described as dimeric and tetrameric aggregates of the {MoO(3)[(Mo(2)O(6))NH(3)CH(2)CH(2)CH(2)C(O)(PO(3))(2)]} units respectively. Their tetrabutylammonium salts show efficient selective oxidation of benzyl alcohol to benzaldehyde with 72.5% and 81.5% benzyl alcohol conversion, and 87.1% and 82.4% benzaldehyde selectivity, respectively.