P4VP and oligo(phenylenevinylene)‐perylenebisimide mixed donor‐acceptor supramolecular comb polymer complexes with improved charge carrier mobility

Random donor‐acceptor (D‐A) supramolecular comb polymers were formed when hydroxyl functionalized donor and acceptor small molecules based on Oligo(phenylenevinylene) (named OPVCN‐OH ) and Perylenebisimide (named UPBI‐PDP ), respectively, were complexed with Poly(4‐vinyl pyridine) (P4VP). A series of random D‐A supramolecular comb polymers were formed by varying the ratios of UPBI‐PDP and OPVCN‐OH with P4VP. A 100% P4VP‐donor polymer complex [ P4VP(OPV_1.00 )] and a 100% P4VP‐acceptor polymer complex [ P4VP(UPBI_1.00 )] were also synthesized and characterized. Complex formation was confirmed by FT‐IR and ¹H NMR spectroscopy. Solid state structural studies carried out using small angle X‐ray scattering and wide angle X‐ray diffraction experiments revealed altered packing of the D and A molecules in the complexes. Transmission electron microscopy images showed lamellar structures in the < 10 nm scale for the P4VP(OPV_1.00 ), P4VP(UPBI_1.00 ), and mixed P4VP (D‐A) complexes. The effect of the nanoscopic D‐A self‐assembly on the bulk mobility of the materials was probed using SCLC measurements. The mixed D‐A random complexes exhibited ambipolar charge transport characteristics with higher values for the average bulk hole mobility estimate. P4VP(OPV_0.25 + UPBI_0.75) exhibited an average hole mobility in the order of 10^?2cm² V^?1 s^?1 and electron mobility 10^?5cm² V^?1 s^?1. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2403–2412     

Surface Morphology Evolution of a Thin Polymeric Supramolecular Film by Tuning Interactions

Summary: A polymeric supramolecule consisting of symmetric polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP), dodecylbenzenesulfonic acid (DBSA), and 3‐pentadecylphenol (PDP) was formed by proton transfer and hydrogen bonding. The surface morphology of a thin film of the polymeric supramolecule has been investigated. The spherical PS microdomains embedded in a P4VP(DBSA)_1.0(PDP)_1.0 matrix are observed for the as‐cast film because the weight fraction, f_comb, of the P4VP(DBSA)_1.0(PDP)_1.0 blocks is much higher than that of PS as a result of the non‐covalent interactions of P4VP and DBSA and DBSA and PDP. Upon annealing the PS‐b‐P4VP(1:1)(DBSA)_1.0(PDP)_1.0 film at high temperatures, the hydrogen bonding between the DBSA and PDP diminishes, which leads to a change of overall morphology from an ordered sphere to a pitted structure.

AFM topographic image of a PS‐b‐P4VP(1:1)(DBSA)_1.0(PDP)_1.0 thin film.     

Enhanced properties of photovoltaic devices tailored with novel supramolecular structures based on reduced graphene oxide nanosheets grafted/functionalized with thiophenic materials

For verifying the influence of donor–acceptor supramolecules on photovoltaic properties, different hybrids were designed and used in organic solar cells. In this respect, reduced graphene oxide (rGO) was functionalization with 2‐thiophene acetic acid (rGO‐f‐TAA) and grafted with poly(3‐dodecylthiophene) (rGO‐g‐PDDT) and poly(3‐thiophene ethanol) (rGO‐g‐PTEt) to manipulate orientation of poly(3‐hexylthiophene) (P3HT) assemblies. Face‐on, edge‐on, and flat‐on orientations were detected for assembled P3HTs on rGO and its functionalized and grafted derivatives, respectively. Alteration of P3HT orientation from face‐on to flat‐on enhanced current density (J _sc), fill factor (FF), and power conversion efficiency (PCE) and thus J _sc = 7.11 mA cm^?2, FF = 47%, and PCE = 2.14% were acquired. By adding phenyl‐C71‐butyric acid methyl ester (PC71BM) to active layers composed of pre‐designed P3HT/rGO, P3HT/rGO‐f‐TAA, P3HT/rGO‐g‐PDDT, and P3HT/rGO‐g‐PTEt hybrids, photovoltaic characteristics further improved, demonstrating that supramolecules appropriately mediated in P3HT:PC71BM solar cells. Phase separation was more intensified in best‐performing photovoltaic systems. Larger P3HT crystals assembled onto grafted rGOs (95–143 nm) may have acted as convenient templates for the larger and more intensified phase separation in P3HT:PCBM films. The best performances were reached for P3HT:P3HT/rGO‐g‐PDDT:PCBM (J _sc = 9.45 mA cm^?2, FF = 54%, and PCE = 3.16%) and P3HT:P3HT/rGO‐g‐PTEt:PCBM (J _sc = 9.32 mA cm^?2, FF = 53%, and PCE = 3.11%) photovoltaic systems. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1877–1889     

Diblock copolymer–azobenzene complexes through hydrogen bonding: Self‐assembly and stable photoinduced optical anisotropy

We have demonstrated the preparation of a series of photoaddressable supramolecular block copolymers by mixing a carboxy‐terminated azobenzene derivative, 6‐[4‐(4′‐cyanophenylazo)phenyloxy]hexanoic acid (AZO), and two polystyrene‐b‐poly(4‐vinylpiridine) (PS‐b‐P4VP) block copolymers. AZO can be selectively attached to the P4VP block of PS‐b‐P4VP through hydrogen bonding interactions. The assembly of AZO with vinylpyridine group‐containing polymers was initially investigated on a model system composed of P4VP homopolymer and AZO. Homogeneous liquid crystalline materials were obtained for ratios of AZO to vinylpyridine repeating unit, x, lower or equal to 0.50. Mixtures with higher x resulted in heterogeneous materials showing clear macrophase separation. Accordingly, a series of hydrogen‐bonded complexes of PS‐b‐P4VP and AZO, PS‐b‐P4VP(AZO)_x, with x = 0.25 and x = 0.50 were prepared. Lamellar and spherical morphologies were observed for the complexes based on PS24‐b‐P4VP9.5 (M_n,PS = 24,000, M_n,P4VP = 9500) and PS24‐b‐P4VP1.9 (M_n,PS = 24,000, M_n,P4VP = 1900), respectively. Photoinduced orientation of the azobenzene units was obtained in films of P4VP(AZO)_x and PS‐b‐P4VP(AZO)_x with x = 0.25 and 0.50 by using 488 nm linearly polarized light and characterized through birefringence and dichroism measurements. This investigation shows a versatile and less laborious approach to azobenzene‐containing polymer materials with low chromophore content, of interest in optical application. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Diazaisoindigo bithiophene and terthiophene copolymers for application in field‐effect transistors and solar cells

Two donor–acceptor conjugated polymers with azaisoindigo as acceptor units and bithiophene and terthiophene as donor units have been synthesized by Stille polymerization. These two polymers have been successfully applied in field‐effect transistors and polymer solar cells. By changing the donor component of the conjugated polymer backbone from bithiophene to terthiophene, the density of thiophene in the backbone is increased, manifesting as a decrease in both ionization potential and in electron affinity. Therefore, the charge transport in field‐effect transistors switches from ambipolar to predominantly hole transport behavior. PAIIDTT exhibits hole mobility up to 0.40 cm²/Vs and electron mobility of 0.02 cm²/Vs, whereas PAIIDTTT exhibits hole mobility of 0.62 cm²/Vs. Polymer solar cells were fabricated based on these two polymers as donors with PC₆₁BM and PC₇₁BM as acceptor where PAIIDTT shows a modest efficiency of 2.57% with a very low energy loss of 0.55 eV, while PAIIDTTT shows a higher efficiency of 6.16% with a higher energy loss of 0.74 eV. Our results suggest that azaisoindgo is a useful building block for the development of efficient polymer solar cells with further improvement possibility by tuning the alternative units on the polymer backbone. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2691–2699     

Studies on the phase structure of ethylene‐vinyl acetate copolymers by solid‐state 1H and 13C NMR

The phase structure of a series of ethylene‐vinyl acetate copolymers has been investigated by solid‐state wide‐line ¹H NMR and solid‐state high‐resolution ¹³C NMR spectroscopy. Not only the degree of crystallinity but the relative contents of the monoclinic and orthorhombic crystals within the crystalline region varied with the vinyl acetate (VA) content. Biexponential ¹³C NMR spin–lattice relaxation behavior was observed for the crystalline region of all samples. The component with longer ¹³C NMR spin–lattice relaxation time (T₁) was attributed to the internal part of the crystalline region, whereas the component with shorter ¹³C NMR T₁ to the mobile crystalline component was located between the noncrystalline region and the internal part of the crystalline region. The content of the mobile crystalline component relative to the internal part of the crystalline region increased with the VA content, showing that the ¹³C NMR spin–lattice relaxation behavior is closely related to the crystalline structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2199–2207, 2002     

Stereoregular P(MMA)‐clay nanocomposites by metallocene catalysts: In situ synthesis and stereocomplex formation

This contribution reports the synthesis and characterization of stereochemically controlled, as well as crystalline stereocomplex, P(MMA)‐clay nanocomposites using metallocene complexes and alane‐intercalated clay activators. The ligand elimination and exchange reactions involving Lewis acids E(C₆F₅)₃ (E = Al, B) and an organically modified montmorillonite clay were employed to synthesize the alane‐intercalated clay activators. When combined with dimethyl metallocenes of various symmetries, these clay activators brought about efficient MMA polymerizations leading to in situ polymerized, stereochemically controlled P(MMA)‐intercalated clay nanocomposites. The most noticeable thermal property enhancement observed for the clay nanocomposite P(MMA), when compared with the pristine P(MMA) having similar molecular weight and stereomicrostructure, has a considerable increase in T_g (≥10 °C). Mixing of dilute THF solutions of two diastereomeric nanocomposites in a 1:2 isotactic to syndiotactic ratio, followed by reprecipitation or crystallization procedures, yielded unique double‐stranded helical stereocomplex P(MMA)‐clay nanocomposites with a predominantly exfoliated clay morphology. Remarkably, the resulting crystalline stereocomplex P(MMA) matrix is resistant to the boiling‐THF extraction and its clay nanocomposites exhibit high T_m of 201 to 210 °C. Furthermore, the stereocomplex P(MMA)‐clay nanocomposite shows a one‐step, narrow decomposition temperature window and a single, high maximum rate decomposition temperature of 377 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2581–2592, 2007     

Shear‐Induced Orientation of Gyroid PS‐b‐P4VP(PDP) Supramolecules

The phase behavior of block copolymer based supramolecular complexes polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) and amphiphilic pentadecylphenol (PDP) molecules resembles the phase behavior of conventional block copolymers. Several PS‐b‐P4VP(PDP) complexes are found to self‐assemble into gyroid nanostructures. Typically, the grains are randomly oriented with a maximal size of several micrometers. Here, the orientation of a gyroid PS‐b‐P4VP(PDP) complex upon shearing is reported. It is found that the (111) gyroid lattice direction orients parallel to the shear direction after only several seconds of large amplitude oscillatory shearing. Oriented gyroid complexes can be used as templates for the preparation of metal nanofoams with improved ordering with potentially superior properties.

     

Study on the formation of a supramolecular conjugated graft copolymer in solution

The formation in solution of a supramolecular graft copolymer bearing conjugated blocks is demonstrated using diffusion ordered NMR spectroscopy (DOSY). A tailor‐made poly(3‐(2‐ethylhexyl)thiophene) (P3EHT) with a phenol end group is synthesized. For this purpose, the chain‐growth mechanism of the polymerization of 2‐bromo‐5‐chloromagnesio‐3‐alkylthiophenes in the presence of a Ni(dppp) catalyst (dppp = 1,3‐bis(triphenylphosphino)propane) is exploited, as it enables the use of functionalized initiators to introduce specific end groups. The so‐obtained polythiophene was subsequently mixed in solution with poly(4‐vinylpyridine) (P4VP) to enable phenol‐pyridine hydrogen bonding. The formation of the supramolecular graft copolymer is studied using DOSY‐measurements. Based on the results thereof, the amount of P3EHT attached to the P4VP is calculated and the association constant of the hydrogen bond is estimated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 804–809     

Supramolecular Interactions Direct the Formation of Two Structural Polymorphs from One Building Unit in a One‐Pot Synthesis

Two polymorphs of supramolecular isomers, a discrete dimer and a zig‐zag chain, having the same chemical composition, [Mn(Hbit)Cl₂] (Hbit=1‐methyl‐2‐(1H‐1,2,3‐triazol‐4‐yl)‐1H‐benzo[d]imidazole), were obtained solvothermally in a one‐pot synthesis. The isomers differ in a number of ways: orange blocks versus pale‐yellow needles, triclinic P versus orthorhombic Pbcn, double μ₂‐Cl versus alternate single and triple μ₂‐Cl, coordination number 5 versus 6, and antiparallel versus parallel near‐neighbor orientation of Hbit. The packing in each case is driven by the supramolecular interactions, H‐bonds (N?H???Cl, C?H???Cl) and π???π overlaps, calculated to be in the range 20–36 kcal mol^?1. Calculations gave a difference of only 2 kcal mol^?1 in favor of the dimer, which confirms with the observation of principally the dimer at short reaction time. ESI‐MS spectra of the dissolved crystals reveal the same fragments with similar distributions. The presence of two fragments at m/z 286.96 [Mn^IV(Hbit)Cl‐2H]⁺ and 323.94 [Mn^III(Hbit)Cl₂]⁺ indicates that [Mn(Hbit)Cl₂] is the building unit in both cases; thus, the different orientations of the ligands lead to the two polymorphs stabilized by the respective supramolecular interactions. Importantly, the chain form represents the first example with alternate single and triple μ₂‐Cl bridges. The magnetic interactions are weakly antiferromagnetic in both cases, with J in the range 0.07–0.34 cm^?1; however, high‐field EPR analysis reveals moderate magneto‐anisotropy with D=0.26(1) cm^?1, E=0.06(1) cm^?1 and D=0.17(1) cm^?1, E=0.03(1) cm^?1, respectively.     

Poly(3‐hexylthiophene)‐b‐poly(3‐cyclohexylthiophene): Synthesis,microphase separation,thin film transistors,and photovoltaic applications

We report the synthesis, characterization, microphase separation, field‐effect charge transport, and photovoltaic properties of regioregular poly(3‐hexylthiophene)‐b‐poly(3‐cyclohexylthiophene) (P3HT‐b‐P3cHT). Two compositions of P3HT‐b‐P3cHT (HcH63 and HcH77) were synthesized with weight‐average molecular weights of 155,500 and 210,800 and polydispersity indices of 1.45 and 1.57, respectively. Solvent‐casted HcH77 was found to self‐assemble into nanowires with a width of 12.5 ± 0.9 nm and aspect ratios of 50–120, as observed by TEM imaging. HcH77 and HcH63 annealed 280 °C were observed by small angle X‐ray scattering (SAXS) and wide angle X‐ray scattering (WAXS) to be microphase‐separated with characteristic length scales of 17.0–21.7 nm. The microphase‐separated domains were shown to be crystalline with interlayer backbone (100) d‐spacings of 1.69 and 1.40 nm, which correspond to the P3HT and P3cHT blocks, respectively. Field‐effect transistors fabricated from P3HT‐b‐P3cHT thin films showed a mobility of holes (0.0019 cm²/Vs) which is independent of thermal annealing. Bulk heterojunction solar cells based on HcH77/fullerene (PC₇₁BM) blend thin films had a maximum power conversion efficiency of 2.45% under 100 mW/cm² AM1.5 solar illumination in air. These results demonstrate that all‐conjugated block copolymers are suitable semiconductors for applications in field‐effect transistors and bulk heterojunction solar cells. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 614–626, 2010     

Investigation of sequence isomer effects in AB‐polybenzimidazole polymers

In the present work, a unique series of random polybenzimidazole (PBI) copolymers consisting of the recently reported novel isomeric AB‐PBI (i‐AB‐PBI) and the well known AB‐PBI were synthesized. The i‐AB‐PBI incorporates additional linkages (2,2 and 5,5) in the benzimidazole sequence when compared with AB‐PBI. Random copolymers, varying in composition at 10 mol % increments, were synthesized to evaluate the effects of sequence isomerism in the polymer main chain without altering the fundamental chemical composition or functionality of a polymer chain consisting of 2,5‐benzimidazole units. Polymer solutions were prepared in polyphosphoric acid (PPA) and cast into membranes using the sol–gel PPA process. The resulting polymers were found to have high inherent viscosities (>2.0 dL/g) and showed elevated membrane proton conductivities (～0.2 S/cm) under anhydrous conditions at 180 °C. Fuel cell performance evaluations were conducted, and an average output voltage ranging from 0.5 to 0.60 V at 0.2 A/cm² was observed for hydrogen/air at an operational temperature of 180 °C without applied backpressure or humidification. Herein, we report for the first time glass transition (T_g) temperatures for AB‐PBI, i‐AB‐PBI, and an anomalous T_g effect for the series of randomized PBIs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 619–628     

Metalloporphyrin–polyelectrolyte assemblies in aqueous solution: Influence of the metal center and the polyelectrolyte architecture

This study investigates the influence of different metal centers in porphyrins and of different polyelectrolyte architectures on the formation of supramolecular metalloporphyrin–polyelectrolyte assemblies in aqueous solution via electrostatic self‐assembly. Metal‐analogues of the tetravalent anionic meso‐tetrakis(4‐sulfonatophenyl)‐porphyrin (with Zn²⁺, Co²⁺, Ni²⁺, Mn³⁺, and Fe³⁺) are combined with the cationic dendrimer of generation 4 or with the linear polydiallyldimethyl‐ammoniumchloride. Dynamic light scattering and atomic force microscopy reveal that the different molecular geometries of the metalloporphyrins resulting from axial ligands determine the size and the stability of the aggregates. A thermodynamic study elucidates the importance of the polymer architecture in controlling the size of the assembly and the role of the metal center. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 484–500     

Conformation study of poly(p‐dioxanone) fibers by polarized Raman spectroscopy,X‐ray diffraction,and conformation analysis

The molecular orientation distribution of poly(p‐dioxanone) (PPDX) uniaxially oriented commercial fibers was determined by polarized Raman spectroscopy and X‐ray diffraction. The order parameters 〈P₂₀₀〉 and 〈P₄₀₀〉 of the orientation distribution function were determined by polarized Raman spectroscopy. For the C?O stretching band, the values of 〈P₂₀₀〉 and 〈P₄₀₀〉 obtained are equal to ?0.40 ± 0.04 and 0.28 ± 0.04, respectively. These results clearly indicate that the carbonyl groups are highly oriented perpendicular to the fiber axis. X‐ray diffraction led to a fiber repeat value of 0.628 nm for these samples, and to 〈P₂₀₀〉 and 〈P₄₀₀〉 values of 0.93 and 0.82, respectively, for the c‐axis orientation, indicating a high orientation in the draw direction of the fibers. A Monte‐Carlo conformational search led to 20 low‐energy conformations, but only one of these was found compatible with both the fiber repeat and the angle between the C?O bond and the fiber axis. This conformation, a 2₁ helix with a tg^?ttg^? succession of torsion angles, is proposed as the existing conformation in the crystalline state. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 406–417, 2008     

Lanthanide(II) Complexes of the Dihydrotriazinido Ligand [N{C(Ph)=N}2C(tBu)Ph]−

The potassium dihydrotriazinide K(L^Ph,tBu) ( 1 ) was obtained by a metal exchange route from [Li(L^Ph,tBu)(THF)₃] and KOtBu (L^Ph,tBu = [N{C(Ph)=N}₂C(tBu)Ph]). Reaction of 1 with 1 or 0.5 equivalents of SmI₂(thf)₂ yielded the monosubstituted Sm^II complex [Sm(L^Ph,tBu)I(THF)₄] ( 2 ) or the disubstituted [Sm(L^Ph,tBu)₂(THF)₂] ( 3 ), respectively. Attempted synthesis of a heteroleptic Sm^II amido‐alkyl complex by the reaction of 2 with KCH₂Ph produced compound 3 due to ligand redistribution. The Yb^II bis(dihydrotriazinide) [Yb(L^Ph,tBu)₂(THF)₂] ( 4 ) was isolated from the 1:1 reaction of YbI₂(THF)₂ and 1 . Molecular structures of the crystalline compounds 2 , 3· 2C₆H₆ and 4· PhMe were determined by X‐ray crystallography.     

Synthesis and FET characterization of novel ambipolar and low‐bandgap naphthalene‐diimide‐based semiconducting polymers

A novel series of naphthalene‐diimide‐based semiconducting polymers ( P1–P4 ) containing benzodithiophene or dithienopyrrole were successfully synthesized for ambipolar semiconducting materials showing near infrared absorptions. The incorporation of a 3‐hexylthiophene (3HT) spacer extended the intramolecular charge‐transfer (ICT) peak from λ_onset = 739 nm ( P1 ) to 785 nm ( P3 ). Moreover, about 250 nm red‐shift of the ICT peaks was observed in P2 and P4 compared to P1 and P3 due to the increased high‐lying HOMO energy levels. The grazing incidence X‐ray scattering of the P3 and P4 films proved the slightly improved crystalline order in the π?π stacking direction, indicating that the planar backbone is probably due to the introduced 3HT. The P1–P4 ‐based field‐effect transistor showed n‐type dominant ambipolar characteristics. The P2 and P4 showed higher electron mobilities up to 1.5 × 10^?2 cm² V^?1 s^?1 than P1 and P3 , which might be influenced by the orientation of the polymer backbone and the intermolecular orbital overlap. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 359–367     

Supramolecular complexes of poly(3‐Hexylthiophene)‐block (and random)‐poly[3‐(2‐(6‐carboxyhexyl)methyl)thiophene] copolymers with perylene bisimide

Block and random copolymers of poly(3‐hexylthiophene) and poly[3‐(2‐(6‐carboxyhexyl)methyl)thiophene] with side‐chain carboxylic functionality ((P3HT‐b‐P3COOH) and (P3HT‐r‐P3COOH) were developed by Grignard Metathesis (GRIM) polymerization. The carboxylic functionality was introduced in the side chain via the oxazoline route. Both the block and random polythiophene copolymers were complexed with pyridine functionalized perylene bisimide to obtain supramolecular block and random polymer complexes. The complex formation in both systems was confirmed by ¹H NMR, WXRD and SAXS studies. An expansion of d spacing upon complex formation was observed in both the block and random copolymer, which could be traced by WXRD. Hole and electron mobilities measured for the supramolecular complexes indicated values which were higher by an order of magnitude for the supramolecular block complex (μ_h ≈ 2.9 × 10⁻⁴ cm²/Vs; μ_e ≈ 3.1 × 10⁻⁶ cm²/Vs) as compared to the random (μ_h ≈ 1.4 × 10⁻⁵ cm²/Vs; μ_e ≈ 4.7 × 10⁻⁷ cm²/Vs) copolymer. These results are indicative of the higher degree of disorder prevailing in the films of random copolymer system compared to the block copolymer. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1574–1583     

High performance semiconducting polymers containing bis(bithiophenyl dithienothiophene)‐based repeating groups for organic thin film transistors

New dithienothiophene‐containing conjugated polymers, such as poly(2,6‐bis(2‐thiophenyl‐3‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 4 and poly(2,6‐bis (2‐thiophenyl‐4‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 8 have been successfully synthesized via Stille coupling reactions using dodecyl‐substituted thiophene‐based monomers, bistributyltin dithienothiophene, and bistributyltin bithiophene; these polymers have been fully characterized. The main difference between the two polymers is the substitution position of the dodecyl side chains in the repeating group. Grazing‐incidence X‐ray diffraction (GI‐XRD) gave clear evidence of edge‐on orientation of polycrystallites to the substrate. The semiconducting properties of the two polymers have been evaluated in organic thin film transistors (OTFTs). The two conjugated polymers 4 and 8 exhibit fairly high hole carrier mobilities as high as μ_ave = 0.05 cm²/Vs (I_ON/OFF = 3.42 × 10⁴) and μ_ave = 0.01 cm²/Vs, (I_ON/OFF = 1.3 × 10⁵), respectively, after thermal annealing process. The solvent annealed films underwent reorganization of the molecules to induce higher crystallinity. Well‐defined atomic force microscopy (AFM) topography supported a significant improvement in TFT device performance. The hole carrier mobilities of the solvent annealed films are comparable to those obtained for a thermally annealed sample, and were one‐order higher than those obtained with a pristine sample. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

High performance polymer field‐effect transistors based on polythiophene derivative with conjugated side chain

Poly(3‐[2‐(5‐hexyl‐2‐thienyl) ethenyl]‐2,2′‐bithiophene) ( P2 , see Scheme 1 ) with conjugated thienylvinyl side chain was synthesized by copolymerization of the thiophene units with and without conjugated side chain with Pd‐catalyzed Stille coupling method. For comparison, P1 with the hexyl side chain instead of conjugated side chain was also synthesized. P2 film shows broad absorption in the visible region with absorption edge at about 700 nm. The solution‐processed polymer field‐effect transistors were fabricated and characterized with bottom gate/top contact geometry. The organic field‐effect transistors (OFET) based on P2 showed an average hole mobility of about 0.034 cm²/Vs (the highest value reached 0.061 cm²/Vs) upon annealing at about 180 °C for 30 min, with a threshold voltage of ?1.15 V and an on/off ratio of 10⁴ with n‐octadecyltrichlorosilane (OTS) modified SiO₂ substrate. In comparison, the OFET based on P1 displayed a hole mobility of 8.9 × 10^–4 cm²/Vs and an on/off ratio of 10⁴ with OTS modified SiO₂ substrate. The results indicate that the polythiophene derivative with conjugated thienylvinyl side chain is a promising polymer for the application in polymer field‐effect transistors. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5304–5312, 2009     

Synthesis,morphology, and field‐effect transistor characteristics of new crystalline–crystalline diblock copolymers of poly(3‐hexylthiophene‐block‐steryl acrylate)

We report the synthesis, morphology, and charge‐transporting characteristics of new crystalline–crystalline diblock copolymers, poly(3‐hexylthiophene‐block‐stearyl acrylate) (P3HT‐b‐PSA). Three different diblock copolymers, P1 , P2 , and P3 , with P3HT/PSA polymerization degree block ratios of 60/26, 60/50, and 60/360, respectively, were prepared for investigating the morphology‐property relationship and the dependence of optoelectronic properties on the block copolymer structure. Small‐ and wide‐angle X‐ray scattering indicated the presence of both P3HT and PSA crystalline domains and the presence of microphase separation among blocks. The transmission electron microscopy and atomic force microscopy results revealed that the diblock copolymers cast from chlorobenzene, tended to form needle‐like morphologies. The field‐effect mobilities of the diblock copolymers deposited on untreated SiO₂ substrates, decreased with increasing PSA block length. In a sharp contrast, the mobilities enhanced with increasing PSA content when the P3HT‐b‐PSA was deposited on phenyltrichlorosilane (PTS)‐treated substrates. The copolymers with a 60/360 P3HT/PSA ratio showed a good mobility of 4 × 10^?3 cm² V^?1 s^?1 and a high on/off ratio of 7 × 10⁶ on PTS‐treated substrates. This study highlighted the importance of the block ratio, the substrate and self‐assembly structures on the charge transport characteristics of the crystalline–crystalline conjugated diblock copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012