Dependence of the luminescent properties and chain length of poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylene vinylene] on the formation of cis‐vinylene bonds during Gilch polymerization

The presence of cis‐vinylene bonds in Gilch‐polymerized poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylene vinylene] is reported. Through fractionation, species with a weight‐average molecular weight of less than 37,000 exhibited an abnormal blueshift of photoluminescence spectra in toluene solutions, and this was attributed to the presence of cis‐vinylene bonds, as verified by NMR spectroscopy. Surprisingly, the fractionated species (～1 wt %) with a weight‐average molecular weight of 5000 were mostly linked by the cis‐vinylene bonds. The concentration decreased with the molecular weight until a molecular weight of 37,000 was reached; at that point, the polymer chains contained mainly trans‐vinylene bonds. Obviously, the formation of cis‐vinylene bonds strongly inhibited the growth of polymer chains during Gilch polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2520–2526, 2005     

Synthesis and ethylene polymerization of 8‐(fluorenylarylimino)‐5,6,7‐trihydroquinolylnickel chlorides: Tailoring polyethylenes by adjusting fluorenyl position and adduct Et2Zn

A series of 8‐(arylimino)‐5,6,7‐trihydroquinolines ligand pendant fluorenyl group at N‐aryl ring, and their nickel complexes ( Ni1 ? Ni5 ) have been prepared and characterized. Once activated with Et₂AlCl, the complexes Ni1 , Ni2 , and Ni3 bearing ligands from para‐fluorenylaniline produced unimodal polyethylenes; on the contrary complexes Ni4 and Ni5 gave bimodal polyethylenes due to steric influence of ligands from ortho‐fluorenyl anilines. With a increment of Et₂Zn/ Ni4 ratio from 0 to 400, the distinct bimodel polyethylenes were obtained with molecular weights shifted from 14.3 to 57.6 kg·mol^?1; apart shiftment to higher molecular weights, the portion of low molecular weight decreased along with higher portion of high molecular weight. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1910–1919     

Reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate using various dithiobenzoates as chain transfer agents

Dialkyl fumarates as 1,2‐disubstituted ethylenes exhibit unique features of radical polymerization kinetics due to their significant steric hindrance in propagation and termination processes and provide polymers with a rigid chain structure different from conventional vinyl polymers. In this study, we carried out reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate (DiPF) in bulk at 80 °C using various dithiobenzoates with different leaving R groups as chain transfer agents to reveal their performance for control of molecular weight, molecular weight distribution, and chain end functionality of the resulting poly(DiPF) (PDiPF). 2‐(Ethoxycarbonyl)‐2‐propyl dithiobenzoate ( DB1 ) and 2,4,4‐trimethyl‐2‐pentyl dithiobenzoate ( DB2 ) underwent fragmentation and reinitiation at a moderate rate and consequently led to the formation of PDiPF with well‐controlled chain structures. It was confirmed that molecular weight of PDiPF produced by controlled polymerization with DB1 and DB2 agreed with theoretical one and molecular weight distribution was narrow. Dithiobenzoate and R fragments were introduced into the polymer chain ends with high functionality as 95% by the use of DB1 . In contrast, polymerizations using 1‐(ethoxycarbonyl)benzyl dithiobenzoate ( DB3 ), 1‐phenylethyl dithiobenzoate ( DB4 ), and 2‐phenyl‐2‐propyl dithiobenzoate ( DB5 ) resulted in poor control of molecular weight, molecular weight distribution, and chain end structures of PDiPF. Fragmentation and reinitiation rates of the used benzoates as chain transfer agents significantly varied depending on the R structures in an opposite fashion; that is, introduction of bulky and conjugating substituents accelerated fragmentation, but it retarded initiation of DiPF polymerization. It was revealed that balance of fragmentation and reinitiation was important for controlled polymerization of DiPF. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3266–3275     

Vinyl addition polymerization of norbornene with cationic (allyl)Ni catalysts: Mechanistic insights and characterization of first insertion products

Several cationic (allyl)Ni(II) complexes were synthesized and shown to be highly active for (2,3)‐vinyl addition polymerization of norbornene to yield polymers with low molecular weight distributions (MWDs) ranging from 1.4–1.9. In all cases slow initiation was followed by rapid propagation which prevents molecular weight control of the poly(norbornene). One of the intermediates in the polymerization process has been identified and characterized by NMR spectroscopy as the first insertion product resulting from the insertion of norbornene into the Ni? C allyl bond in cis‐exo fashion. This insertion product was synthesized independently and NMR studies showed that the first insertion of norbornene into the Ni? C allyl bond is a reversible process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2560–2573, 2009     

Palladium‐catalyzed three‐component coupling polycondensation of aromatic diiodide,aromatic bis(boronic acid propanediol ester), and norbornadiene: A new route for poly(p‐phenylene vinylene)

A novel synthetic method for soluble precursor polymers of poly(p‐phenylene vinylene) (PPV) derivatives by the palladium‐catalyzed three‐component coupling polycondensation of aromatic diiodides, aromatic bis(boronic acid) derivatives, and norbornadiene is described. For example, the polymerization of 1,4‐diiodo‐2,5‐dioctyloxybenzene, benzene‐1,4‐bis(boronic acid propanediol ester), and norbornadiene at 100 °C for 3 days provided a polymer consisting of the three monomer units in a 97% yield (number‐average molecular weight = 3100, weight‐average molecular weight/number‐average molecular weight = 1.37). A derivative of PPV was produced smoothly by the retro Diels–Alder reaction of the polymer both in a dodecyloxybenzene solution and in a film at 200 °C in vacuo. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3403–3410, 2005     

Cationic copolymerization of ε‐caprolactone and L,L‐lactide by an activated monomer mechanism

The cationic homopolymerization and copolymerization of L,L ‐lactide and ε‐caprolactone in the presence of alcohol have been studied. The rate of homopolymerization of ε‐caprolactone is slightly higher than that of L,L ‐lactide. In the copolymerization, the reverse order of reactivities has been observed, and L,L ‐lactide is preferentially incorporated into the copolymer. Both the homopolymerization and copolymerization proceed by an activated monomer mechanism, and the molecular weights and dispersities are controlled {number‐average degree of polymerization = ([M]₀ ? [M]_t)/[I]₀, where [M]₀ is the initial monomer concentration, [M]_t is the monomer concentration at time t, and [I]₀ is the initial initiator concentration; weight‐average molecular weight/number‐average molecular weight ～1.1–1.3}. An analysis of ¹³C NMR spectra of the copolymers indicates that transesterification is slow in comparison with propagation, and the microstructure of the copolymers is governed by the relative reactivity of the comonomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7071–7081, 2006     

The efficient cyclopolymerization of silyl‐tethered styrenic difunctional monomers

The synthesis and characterization of innovative difunctional styrene‐based monomers and their cyclopolymerization is reported. Difunctional silyl‐based protecting groups with different steric hindrance (either methyl/phenyl or phenyl/phenyl) are used as “tethers” for two 4‐vinylbenzyl reactive moieties. We demonstrate that efficient cyclopolymerization, performed under free‐radical conditions or RAFT‐mediated, takes place for both monomers. RAFT polymerization allows excellent control of M_n and higher degree of polymerization when compared to uncontrolled radical polymerization, yet not optimal control of dispersities. The silyl tethering group could be removed to afford poly(p‐hydroxymethylstyrene). Thermogravimetric analysis (TGA) demonstrates the thermal robustness of the new cyclopolymers, and gives an insight on the ability of the corresponding deprotected polymer to chelate metals ions. The described strategy opens possibilities to achieve sequence control through a cyclopolymerization/tether removal strategy, when having two suitable aromatic systems with opposing electronic character and reactivities in chain cyclopolymerization. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1593–1599     

Photo‐oxidation of poly(2,6‐dimethyl‐1,4‐phenylene oxide): A reinvestigation

Reinvestigation of poly(2,6‐dimethyl‐1,4‐phenylene oxide) photodegradation at wavelengths > 290 nm shows that both methyl groups and aromatic rings are sites of oxidation with their relative rates dependent on exposure conditions, based on infrared spectroscopy. The methyl group loss is linear with exposure and apparently proceeds by direct abstraction of a benzylic hydrogen by oxygen. The aromatic ring loss and carbonyl growth in the IR spectra appear to be auto‐accelerating and seem to proceed by electron transfer to oxygen, either sensitized or through a direct reaction with oxygen, and recombination of the polymer radical cation and superoxide to result in oxygen addition to the ring. Molecular weight loss in solution occurs to a significant degree only in the presence of oxygen, even in the presence of a hydrogen‐donating solvent, indicating that aryl ether photolysis is not a major pathway. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2318–2331     

Facile one‐pot/one‐step technique for preparation of side‐chain functionalized polymers: Combination of SET‐RAFT polymerization of azide vinyl monomer and click chemistry

An azido‐containing functional monomer, 11‐azido‐undecanoyl methacrylate, was successfully polymerized via ambient temperature single electron transfer initiation and propagation through the reversible addition–fragmentation chain transfer (SET‐RAFT) method. The polymerization behavior possessed the characteristics of “living”/controlled radical polymerization. The kinetic plot was first order, and the molecular weight of the polymer increased linearly with the monomer conversion while keeping the relatively narrow molecular weight distribution (M_w/M_n ≤ 1.22). The complete retention of azido group of the resulting polymer was confirmed by ¹H NMR and FTIR analysis. Retention of chain functionality was confirmed by chain extension with methyl methacrylate to yield a diblock copolymer. Furthermore, the side‐chain functionalized polymer could be prepared by one‐pot/one‐step technique, which is combination of SET‐RAFT and “click chemistry” methods. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Molecular weight analysis of water‐soluble poly(phenylene ethynylene)s using MALDI‐TOF MS

Molecular weights of seven poly(phenylene ethynylene)‐based water‐soluble conjugated polyelectrolytes (CPEs) obtained through Sonogashira coupling are determined by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). A standard sample preparation protocol is developed to characterize the seven CPEs using 2,5‐dihydroxybenzoic acid as the matrix (M) and AgTFA as the cationization reagent (CR). High‐quality MALDI mass spectra are obtained at volume mixing ratios (CPE/M/CR) of 5/5/1 for anionic polymers (P1–P4) and 5/50/1 for cationic polymers (P5–P7). Molecular weight, molecular weight distribution, and end‐group information are analyzed. The effects of molecular weight of CPEs on optical and quenching properties are also studied. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2537–2543     

Grignard condensation routes to 1,3‐disilacyclobutane‐containing cyclolinear polycarbosilanes

Alkylene‐ and arylene‐bridged cyclolinear polycarbosilanes (CLPCS) with 1,3‐disilacyclobutane (DSCB) rings incorporated in the main chain of the polymer were prepared by polycondensation between corresponding di‐functional DSCB derivatives and di‐Grignard reagents. Well‐defined, low molecular weight (M_n = 3–5K; DP = 17–26), hexylene‐ and phenylene‐bridged CLPCS polymers were obtained without appreciable ring opening of the DSCB rings. Large exothermic peaks were observed in the DSC for these CLPCSs, which indicated, along with the IR spectra, that crosslinking occurred on heating to about 250 °C via the ring opening of the embedded, alternating, DSCB rings. Moreover, PB‐CLPCS undergoes photochemically induced crosslinking on UV irradiation to form crosslinked polycarbosilane network films. The spin‐cast, cured, films of these CLPCSs exhibit relatively low dielectric constants and promising thermal and mechanical properties for applications in electronics, for example, directly UV‐photoimprinted low‐k dielectrics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1547–1557     

Can Extensional Flow Rupture Macromolecules in an Electrospinning Process?

The fracture of high molecular weight poly(ethylene oxide) (PEO) chains under extensional stretching during the electrospinning of aqueous solutions was investigated by measuring solution viscosities and monitoring the change of molecular weight. The degree of macromolecular chain fractures in 1.0% polymer solutions increased with the increase in molecular weight. The strain rates for stretching and fracturing of macromolecules are critical for the degradation of polymers along with experimental elongational strain rates. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1051–1054     

Relaxing nonequilibrated polymers in thin films at temperatures slightly above the glass transition

We have studied the dewetting process of thin polystyrene films on nonwettable substrates in the viscoelastic regime slightly above the glass transition temperature. The evolution of the shape of the dewetting rim for varying film thickness, molecular weights and dewetting temperatures allowed us to determine the relaxation rates of residual stresses, which originated from nonequilibrated polymer chain conformations formed during film preparation by spin‐coating. For long chain polymers, we found rates notably faster than the longest bulk relaxation processes, highly independent of molecular weight and temperature. Our study demonstrates that dewetting is a powerful tool for sensitive characterization of nonequilibrium properties of thin polymer films. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 515–523     

Synthesis of molecular‐weight‐controlled polyfluorene with boronate at one end

We investigated the synthesis of polyfluorene with a pinacol boronate (PinB) moiety at one end and with controlled molecular weight by means of Suzuki–Miyaura coupling polymerization of pinacol (7‐bromo‐9,9‐dioctyl‐9H‐fluoren‐2‐yl)boronate ( 1 ) with a palladium(0) precatalyst in the presence of pinacol 4‐trifluoromethylphenylboronate ( 2 ) as a chain terminator and CsF/18‐crown‐6 as a base. When we used AmPhos Pd G2, which has a propensity for intramolecular catalyst transfer on a π‐electron face, polyfluorene with the PinB moiety at one end and PhCF₃ (derived from 2 ) at the other end was obtained, and the molecular weight increased in proportion to the feed ratio of [ 1 ]₀/[catalyst]₀, though the molecular weight distribution was broad. Since the molecular weight also linearly increased with respect to the conversion of 1 until the middle stage of polymerization, the polymerization appears to involve chain‐growth polymerization through intramolecular catalyst transfer from the Pd catalyst inserted into the C? Br bond of 1 . The broad molecular weight distribution might be mainly due to slow initiation and slow termination with 2 , rather than polymer–polymer coupling. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2498–2504     

Synthesis and characterization of new blue‐light‐emitting polymers based on PPP and PPV having fluorene pendant at vinyl bridge

The new poly(arylene vinylene) derivatives, which are composed of biphenylene vinylene phenylene vinylene, biphenylene vinylene m‐phenylene vinylene, terphenylene vinylene phenylene vinylene, and terphenylene vinylene m‐phenylene vinylene as backbone and bulky fluorene pendants at each vinyl bridge, were designed, synthesized, and characterized. The obtained polymers showed weight‐average molecular weights of 11,100–39,800 with polydispersity indexes ranging from 1.5 to 2.1. The resulting polymers were amorphous with high thermal stability and readily soluble in common organic solvents. The obtained polymers showed blue emission (λ_max = 456–475 nm) in PL spectra, and polymer 4 containing terphenylene vinylene m‐phenylene vinylene showed the most blue shifted blue emission (λ_max = 456 nm). The double layer light‐emitting diode devices fabricated by using obtained polymers as emitter emitted bright blue light. The device showed turn on voltage around 6.5 V and brightness of 70–250 cd/m². © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4923–4931, 2006     

Radical‐medicated end‐group transformation of amphiphilic methacrylate random copolymers for modulation of antimicrobial and hemolytic activities

This work describes synthesis of antimicrobial methacrylate copolymers by reversible addition‐fragmentation chain transfer (RAFT) polymerization and examines the versatility of this approach for improving chemical optimization to create potent, non‐toxic antimicrobial polymers. Specifically, this study focuses on the radical‐mediated transformation of end group of antimicrobial peptide‐mimetic polymer. RAFT polymerization using 2‐cyano‐2‐yl‐dithiobenzoate provided a statistical methacrylate copolymer consisting of aminobutyl and ethyl groups in the side chains. The following radical‐mediated modification using free radical initiators successfully transformed the ω‐end group of parent copolymer from dithiobenzoate to a cyanoisobutyl or aminoethyl cyanopentanoate group without any significant changes to the polymer molecular weight. In general, the parent polymer and variants showed a broad spectrum of activity against a panel of bacteria, but low hemolytic activity against human red blood cells. The parent copolymer with the dithiobenzoate end‐group showed highest antimicrobial and hemolytic activities as compared with other copolymers. The copolymers caused membrane depolarization in Staphylococcus aureus, while the ability of copolymers for membrane disruption is not dependent on the end‐group structures. The synthetic route reported in this study will be useful for further study of the role of polymer end‐groups in the antimicrobial activity of copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 304–312     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Nonisothermal crystallization and melting behavior of a luminescent conjugated polymer,poly(9,9‐dihexylfluorene‐alt‐co‐2,5‐didecyloxy‐1,4‐phenylene)

The nonisothermal crystallization kinetics of a luminescent conjugated polymer, poly(9,9‐dihexylfluorene‐alt‐co‐2,5‐didecyloxy‐1,4‐phenylene) (PF6OC10) with three different molecular weights was investigated by differential scanning calorimetry under different cooling rates from the melt. With increasing molecular weight of PF6OC10, the temperature range of crystallization peak steadily became narrower and shifted to higher temperature region and the crystallization rate increased. It was found that the Ozawa method failed to describe the nonisothermal crystallization behavior of PF6OC10. Although the Avrami method did not effectively describe the nonisothermal crystallization kinetics of PF6OC10 for overall process, it was valid for describing the early stage of crystallization with an Avrami exponent n of about 3. The combined method proposed in our previous report was able to satisfactorily describe the nonisothermal crystallization behavior of PF6OC10. The crystallization activation energies determined by Kissinger, Takhor, and Augis‐Bennett models were comparable. The melting temperature of PF6OC10 increased with increasing molecular weight. For low‐molecular‐weight sample, PF6OC10 showed the characteristic of double melting phenomenon. The interval between the two melting peaks decreased with increasing molecular weight, and only one melting peak was observed for the high‐molecular‐weight sample. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 976–987, 2007     

Preparation of semi‐alternating conjugated polymers using direct arylation polymerization (DArP) and improvement of photovoltaic device performance through structural variation

The results herein expand on optimized direct arylation polymerization (DArP) conditions for defect‐free poly[(2,5‐bis (2‐hexyldecyloxy)phenylene)‐alt‐(4,7‐di(thiophen‐2‐yl)benzo[c][1,2,5] thiadiazole)] (PPDTBT). Semi‐alternating and alternating donor–acceptor polymers containing alkoxy phenylene, dithienyl‐substituted thieno[3,4‐c]pyrrole‐4,6‐dione (DTTPD), and dithienyl‐substituted diketopyrrolopyrrole (DTDPP) were prepared via DArP, including a four‐component semi‐alternating copolymer PPDTDPPTPD. Variation of the alkoxy substituents on the phenylene donor including n‐hexyl, 2‐ethylhexyl, or 2‐hexyldecyl allowed for the tuning of thephysical and electronic properties. Molecular weights (M _n) ranged from 3.07 to 28.3 kDa for the PPDTTPD polymers and 2.63‐44.0 kDa for the PPDTDPP polymers, depending on the alkoxy substituents. Absorbance maxima and HOMO energies were varied from 550 to 602 nm and ?5.31 to ?5.69 eV for the PPDTTPD polymers and from 671 to 794 nm and ?5.41 to ?5.55 eV for the PPDTDPP polymers, respectively. Additive‐free, bulk heterojunction (BHJ) solar cells were fabricated, and the fill‐factors obtained (0.57–0.63) are some of the highest reported for polymers prepared using DArP. Higher molecular weight polymers for both PPDTTPD (28 kDa) and PPDTDPP (44 kDa) series performed poorly in solar cells. In contrast, the semi‐alternating polymers of lower M _n for the PPDTTPD (12.4 kDa) and PPDTDPP (9.05 kDa) series, incorporating both n‐hexyl and 2‐hexyldecyl alkoxy phenylene donors, provided power conversion efficiencies (PCE) of 3.26% and 3.49%, respectively. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3370–3380     

Glucose oxidase deoxygenation−redox initiation for RAFT polymerization in air

A new methodology based on glucose oxidase (GOx) deoxygenation and hydrogen peroxide/vitamin C (H₂O₂/Vc) redox initiation for conducting RAFT polymerization at low temperature in air is reported. GOx catalyzes reduction of oxygen in the presence of glucose to generate hydrogen peroxide, which is directly used to constitute a redox pair with Vc for the efficient generation of hydroxyl radicals to initiate RAFT polymerization in air. Various experimental parameters including temperature, stirring speed, prepolymerization incubation time, and concentrations of Vc, glucose, and GOx were evaluated with respect to monomer conversion, molecular weight, and dispersity. Efficient removal of oxygen is typically realized within 10 min before polymerization is initiated by addition of Vc, and high conversions are achieved within 5 h. Well‐defined homopolymers and block copolymers have been efficiently synthesized with high monomer conversions and low dispersities (< 1.2). Using this new methodology, it is possible to conduct controlled RAFT polymerizations in both open and sealed vessels, though lower conversions but less termination by oxygen are typically observed for the sealed systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 164–174