SiO2包覆Gd2O3:Er3+,Yb3+纳米粉的制备、结构及发光性能

用微乳液法合成出SiO2包覆的Yb3+,Er3+离子舣掺杂的Gd2O3粉体,X射线衍射结果表明所制备粉体为立方Gd2O3结构.透射电镜照片显示其颗粒形状近似为球形,粒径为10～40 nm;该粉体在波长为980 nm的半导体激光器激发下发射出中心波长为562 nm的绿色和660 m的红色上转换荧光,分别对应于Er3+离子的4S3/2/2H11/2→4I15/2跃迁和4F9/2→4I15/2跃迁.发光强度和激发功率关系的研究揭示其均为双光子过程,能量传递和激发态吸收是上转换发光的主要机制.由于其具有高效的上转换发光性能,而经过纳米复合后制成的纳米Gd2O3(核)/SiO2(壳),容易溶于水并易于和有机物结合,能与生物分子结合.     

Er3+/Yb3+共掺纳米In2O3的制备及上转换发光

用低温溶剂热法以乙二醇为溶剂合成了Er3+和Yb3+共掺的In2O3纳米晶。用X射线衍射(XRD)、透射电镜(TEM)、漫反射光谱和上转换发光光谱对样品进行了分析。XRD和TEM结果表明,产物为纯的立方相In2O3结构,粒径约为30 nm;漫反射光谱显示了In2O3∶Er3+,Yb3+纳米晶在522、653和975 nm附近有3个吸收带;在980 nm近红外光激发下,样品发射出中心波长为525及555 nm的绿光和662 nm的红光,分别对应于Er3+的2H11/2→4I15/2、4S3/2→4I15/2和4F9/2→4I15/2跃迁;研究了Er3+和Yb3+离子的不同掺杂浓度对发光强度的影响,确定了Yb3+和Er3+离子的最佳掺杂浓度均为3%;双对数曲线显示绿光和红光的发射过程均为双光子吸收过程,对样品的上转换发光机制进行了初步讨论。     

Li+掺杂对TeO2:Tm3+/Er3+/Yb3+纳米材料上转换发光的增强作用

采用水热法制备了发白光的Li+掺杂α-TeO2∶Tm3+/Er3+/Yb3+和β-TeO2∶Tm3+/Er3+/Yb3+纳米上转换发光材料。采用X射线衍射、透射电镜和上转换发光光谱对制备的TeO2∶Tm3+/Er3+/Yb3+/Li+纳米材料进行表征,结果显示:Li+的掺入基本不改变纳米材料的晶型和结构;在980 nm近红外光的激发下,纳米材料发射出中心波长476 nm的蓝光,525 nm及545 nm的绿光和659 nm及675nm的红光,分别对应于Tm3+的1G4→3H6能级跃迁,Er3+的2H11/2→4I15/2和4S3/2→4I15/2能级跃迁,Er3+的4F9/2→4I15/2能级跃迁和Tm3+的3F2→3H6能级跃迁;Li+的掺入能够增大白光体系的发光强度,基本不改变纳米材料的白光颜色。此外,探讨了纳米材料的上转换发光机理。     

Nd3+，La3+共掺杂氧化钇透明陶瓷的制备及其性能

采用氨水共沉淀法制备出 Nd3+,La3+共掺杂氧化钇粉体.将粉体在1 700 ℃真空条件下烧结4h成功制备出高质量的Nd3+,La3+共掺杂氧化钇透明陶瓷.对粉体和透明陶瓷样品的显微结构、光谱特性等用XRD、SEM、UV-Vis、FL等手段进行了表征和研究.结果表明:Nd3+和La3+均匀地溶解于氧化钇晶格之中,从而使氧化钇原有晶格常数变大,有序度下降.1100 ℃煅烧后粉体颗粒大小均匀,近似球形,粒径约60 nm,粉体具有Nd3+特有的荧光发射光谱特性.烧结后,透明陶瓷晶粒均匀,粒径约22.2 μm,晶粒内和晶界处都未见气孔存在:样品(厚度为2 mm)对800 nm光的透过率高达76%;主吸收峰位于821 nm处,吸收峰半高宽为5 nm.4F3/2→4I11/2这组发射跃迁的强度最大,荧光发射主峰位于1078 nm处,适合于作为激光透明陶瓷应用.     

Y2O2S∶Er3+，Yb3+的制备及Er3+离子在晶场中的能级分裂

采用沉淀法制备前驱体,通过不同温度合成了上转换发光材料Y2O2S∶Er3+,Yb3+,运用XRD,SEM和上转换发射光谱对其进行表征。结果表明,所合成的Y2O2S∶Er3+Yb3+属于六方晶系晶体,随着合成温度的升高,产物的粒径不断增大,上转换发射光强度逐渐增加。研究Y2O2S∶Er3+Yb3+的上转换发光过程,红光发射和绿光发射分别源于Er3+离子的4F9/2→4I15/2以及2H11/2→4I15/2,4S3/2→4I15/2能级跃迁。利用群论计算了晶场中Er3+离子的能级分裂数目。     

稀土双掺Y2O2S双波长响应上转换发光材料制备及性能研究

采用高温固相反应法制备出针对980,1550 nm均响应的Y2O2S:Er3+,Yb3+红外上转换发光材料。通过正交实验研究了稀土掺杂浓度、灼烧温度、灼烧时间、助熔剂用量等对产物发光性能影响的主次关系,并确定出最佳配比和制备工艺参数。采用X射线粉末衍射仪、荧光分光光度计等手段对样品的物相及发光性能进行了测试与表征。综合考虑样品的双波长响应效果,确定样品的最佳配方为A4B3C1D3E2(即Er3+浓度10%,Yb3+浓度7.5%,1100℃,5 h,助熔剂用量为质量比m(Y2O3)∶m(S)∶m(Na2CO3)=10∶3∶2)。样品为六方晶系Y2O2S结构,Er3+,Yb3+的引入未改变晶体结构。在980和1550 nm激发下,样品发出源于Er3+的2H11/2→4I15/2,4S3/2→4I15/2跃迁的绿光(520～570nm)和4F9/2→4I15/2跃迁的红光(650～680 nm)。     

Yb3+,Er3+掺杂的NaGd(MoO4)2纳米晶的制备及发光性能

采用水热合成技术成功制备了一种新型的上转换发光纳米晶体NaGd(MoO4)2:Yb3+,Er3+.采用X射线粉末衍射分析、透射电镜和光谱分析对不同条件下所得样品的结构和发光性能进行了表征.NaGd(MoO4)2:Yb3+,Er3+和NaGd(MoO4)2具有相同的晶体结构,属于四方晶系;透射电镜观察表明,所得晶体为直径约为20 nm的纳米棒;在980 nm红外激光器的激发下,观察到了3个明显的上转换发射峰,发光中心分别位于531,552和656 nm,分别对应于Er3+2H11/2→I15/2,4S3/2→I15/2和4F9/2→4I15/2的跃迁.     

GdF3∶Er3+，Yb3+的合成和上转换发光特性

采用水热法制备了Er3 离子浓度为3%,yb3 离子浓度分别为10%,20%的GdF3:Er3 ,Yb3 .XRD结果表明:合成的样品均为正交结构的GdF3,Cd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26 nm.研究了980 nm红外光激发的上转换发射光谱.结果表明:红光和绿光发射分别来自于Er3 离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁.样品的绿光发射强度较红光发射强.但绿光和红光发射的相对强度比例与Yb3 离子浓度有关.对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论.     

GdF3∶Er^3＋,Yb^3＋的合成和上转换发光特性

采用水热法制备了Er^3＋离子浓度为3%,Yb^3＋离子浓度分别为10%,20%的GdF3∶Er^3＋,Yb^3＋。XRD结果表明：合成的样品均为正交结构的GdF3,Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26nm。研究了980nm红外光激发的上转换发射光谱。结果表明：红光和绿光发射分别来自于Er^3＋离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁。样品的绿光发射强度较红光发射强。但绿光和红光发射的相对强度比例与Yb^3＋离子浓度有关。对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论。     

Er3+和Yb3+共掺杂La2Ti2O7纳米晶的上转换发光

采用溶胶-凝胶法制备了 Er3+单掺杂A2 Ti2O7(A=La,Y,Gd)和Er3+,Yb3+共掺杂的La2 Ti2O7纳米晶样品.用X射线衍射仪、扫描电子显微镜和紫外-可见-近红外光谱仪分别对样品的结构、形貌和光吸收性质进行了表征;测试了样品在980 nm激光激发下的室温上转换光谱.结果发现,样品都发出了很强的绿光(大约在525和549 nm)和红光(大约660 nm).通过研究这些基质的晶体结构对上转换发光的影响,发现La2 Ti2O7基质中Er3+离子的上转换发射最强.对La2 Ti2O7纳米晶的上转换发光研究表明,Yb3离子能够有效地敏化Er3离子的上转换发射.对上转换发光强度与泵浦功率的依赖分析,发现红光和绿光的发射均属于双光子吸收过程,最后讨论了Er3+和Yb3的上转换发光机制.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.