Immunosorbents: A new tool for pesticide sample handling in environmental analysis

 Immunoaffinity techniques have been widely used for the determination of different analytes in the medical field. However the use of antibodies immobilized in an appropriate support material to preconcentrate pesticides from environmental samples is only recent. The production of antibodies, election of supports, antibody immobilization procedures, elution of analytes from immunosorbents and the more recent applications in the field of pesticide analysis are reviewed. The present review concludes that immunosorbents have great potential and discusses the present limitations and expected future trends. Received: 29 July 1996 / Accepted: 14 August 1996     

Flow-through fluorescence immunosensor for atrazine determination

A new flow-through fluoroimmunosensor for atrazine determination based on the use of protein A immobilized on controlled pore glass as immunoreactor is reported. The support, placed in the optical path of the flow cell, allows the ‘in situ’ quantification of atrazine by on-line antigen–antibody binding upon successive injections of both substances. The immunosensor has a detection limit of 2.1 μg l⁻¹, a sample speed of about 10 samples per hour, and provides high reproducibility both within-day (3.2% for 5 μg l⁻¹ and 2.2% for 30 μg l⁻¹) and between days. The optimum working concentration range was 2.1–50 μg l⁻¹. Possible interferences of other triazines like simazine, desethylatrazine (DEA) and desisopropylatrazine (DIA) were evaluated. Simazine and DIA were not cross-reactive; however, the cross-reactivity for DEA was CR=7.7%. The proposed immunosensor was successfully applied to the determination of atrazine in drinking water and citrus fruits.     

State of the art of environmentally friendly sample preparation approaches for determination of PBDEs and metabolites in environmental and biological samples: A critical review

Green chemistry principles for developing methodologies have gained attention in analytical chemistry in recent decades. A growing number of analytical techniques have been proposed for determination of organic persistent pollutants in environmental and biological samples. In this light, the current review aims to present state-of-the-art sample preparation approaches based on green analytical principles proposed for the determination of polybrominated diphenyl ethers (PBDEs) and metabolites (OH-PBDEs and MeO-PBDEs) in environmental and biological samples. Approaches to lower the solvent consumption and accelerate the extraction, such as pressurized liquid extraction, microwave-assisted extraction, and ultrasound-assisted extraction, are discussed in this review. Special attention is paid to miniaturized sample preparation methodologies and strategies proposed to reduce organic solvent consumption. Additionally, extraction techniques based on alternative solvents (surfactants, supercritical fluids, or ionic liquids) are also commented in this work, even though these are scarcely used for determination of PBDEs. In addition to liquid-based extraction techniques, solid-based analytical techniques are also addressed. The development of greener, faster and simpler sample preparation approaches has increased in recent years (2003–2013). Among green extraction techniques, those based on the liquid phase predominate over those based on the solid phase (71% vs. 29%, respectively). For solid samples, solvent assisted extraction techniques are preferred for leaching of PBDEs, and liquid phase microextraction techniques are mostly used for liquid samples. Likewise, green characteristics of the instrumental analysis used after the extraction and clean-up steps are briefly discussed.     

Two new techniques for sample preparation in bioanalysis: Microextraction in packed sorbent (MEPS) and use of a bonded monolith as sorbent for sample preparation in polypropylene tips for 96-well plates

Analytical methods providing high throughput are required for the ever increasing number of samples in bioanalysis. Currently, the method of choice in bioanalysis is LC-MS-MS. This method is quite rapid and thereby the focus has been directed to sample preparation as being a bottleneck in total analysis systems. It has become necessary to develop sample preparation techniques to a new improved level. This development has been based on a systematic and scientific approach. The key factors in this development have been miniaturization, integration, and automation of the techniques. This review provides a short overview of recent developments. Special emphasis is on two techniques: microextraction in packed syringe (MEPS) and use of a monolithic acrylamide plug as sorbent in polypropylene tips primarily intended for use with 96-well plate systems.     

Aflatoxin M1 determination in raw milk using a flow-injection immunoassay system

A flow-injection immunoassay (FI-IA) method with amperometric detection for aflatoxin M1 (AFM1) determination in milk has been developed. The first step consists in an incubation of the sample containing AFM1 (Ag) with fixed amounts of anti-AFM1 antibody (Ab) and of the tracer (Ag^*, AFM1 covalently coupled to HRP) until equilibrium is reached. In this mixture a competition occurs between Ag and Ag^* for the Ab. The mixture is then injected into a flow system where the separation of the free tracer (Ag^*) and the antibody-bound tracer (AbAg^*) is performed in a column with immobilized Protein G. The antigen–antibody complexes are retained in the column due to the high affinity of the Protein G for the antibody. The activity of the eluted enzyme label is then amperometrically detected.

The immunoassay was optimised relative to conditions for antibody–antigen incubation (pH, incubation time, ionic strength, temperature) and enzymatic label detection. This method showed a dynamic concentration range between 20 and 500 ppt AFM1, a low detection limit (11 ppt), good reproducibility (RSD < 8%) and a high throughput (six samples per hour in triplicate). Different milk samples were analysed and the results were in good agreement with those obtained by HPLC using the AOAC 2000.08 method.     

Advantages and limitations of on-line solid phase extraction coupled to liquid chromatography-mass spectrometry technologies versus biosensors for monitoring of emerging contaminants in water

On-line solid phase extraction (SPE) coupled to liquid chromatography-mass spectrometry (LC-MS) and biosensors are advanced technologies that have found increasing application in the analysis of environmental contaminants although their application to the determination of emerging contaminants (previously unknown or unrecognized pollutants) has been still limited. This review covers the most recent advances occurred in the areas of on-line SPE-LC-MS and biosensors, discusses and compares the main strengths and limitations of the two approaches, and examines their most relevant applications to the analysis of emerging contaminants in environmental waters. So far, the on-line configuration most frequently used has been SPE coupled to liquid chromatography-(tandem) mass spectrometry. Sorbents used for on-line SPE have included both traditional (alkyl-bonded silicas and polymers) and novel (restricted access materials (RAMs), molecularly imprinted synthetic polymers (MIPs), and immobilized receptors or antibodies (immunosorbents) materials. The biosensor technologies most frequently applied have been based on the use of antibodies and, to a lesser extent, enzymes, bacteria, receptors and DNA as recognition elements, and the use of optical and electrochemical transducing elements. Emerging contaminants investigated by means of these two techniques have included pharmaceuticals, endocrine disrupting compounds such as estrogens, alkylphenols and bisphenol A, pesticides transformation products, disinfection by-products, and bacterial toxins and mycotoxins, among others. Both techniques offer advantageous, and frequently comparable, features such as high sensitivity and selectivity, minimum sample manipulation, and automation. Biosensors are, in addition, relatively cheap and fast, which make them ideally suited for routine testing and screening of samples; however, in most cases, they can not compete yet with on-line SPE procedures in terms of accuracy, reproducibility, reliability (confirmation) of results, and capacity for multi-analyte determination.     

Recent Advances in Sample Preparation for Cosmetics and Personal Care Products Analysis

The use of cosmetics and personal care products is increasing worldwide. Their high matrix complexity, together with the wide range of products currently marketed under different forms imply a challenge for their analysis, most of them requiring a sample pre-treatment step before analysis. Classical sample preparation methodologies involve large amounts of organic solvents as well as multiple steps resulting in large time consumption. Therefore, in recent years, the trends have been moved towards the development of simple, sustainable, and environmentally friendly methodologies in two ways: (i) the miniaturization of conventional procedures allowing a reduction in the consumption of solvents and reagents; and (ii) the development and application of sorbent- and liquid-based microextraction technologies to obtain a high analyte enrichment, avoiding or significantly reducing the use of organic solvents. This review provides an overview of analytical methodology during the last ten years, placing special emphasis on sample preparation to analyse cosmetics and personal care products. The use of liquid–liquid and solid–liquid extraction (LLE, SLE), ultrasound-assisted extraction (UAE), solid-phase extraction (SPE), pressurized liquid extraction (PLE), matrix solid-phase extraction (MSPD), and liquid- and sorbent-based microextraction techniques will be reviewed. The most recent advances and future trends including the development of new materials and green solvents will be also addressed.     

Flow-injection immuno-bioassay for interleukin-6 in humans based on gold nanoparticles modified screen-printed graphite electrodes

A flow-injection electrochemical immunoassay system based on a disposable immunosensor for the determination of interleukin-6 (IL-6) was proposed. The immunosensor was prepared by entrapping horseradish peroxidase (HRP)-labeled IL-6 antibody into gold nanoparticles-modified composite membrane at a screen-printed graphite electrode. With a non-competitive immunoassay format, the immunosensor was inserted in the flow system with an injection of sample, and the injected sample containing IL-6 antigen was produced transparent immunoaffinity reaction with the immobilized HRP-labeled IL-6 antibody. The formed antigen–antibody complex inhibited partly the active center of HRP, and decreased the immobilized HRP to H₂O₂ reduction. The performance and factors influencing the performance of the immunosensor were investigated. Under optimal conditions, the current change obtained from the labeled HRP relative to thionine–H₂O₂ system was proportional to the IL-6 concentration in the range of 5–100 ng L⁻¹ with a detection limit of 1.0 ng L⁻¹ (at 3δ). The flow-injection immunoassay system could automatically control the incubation, washing and measurement steps with acceptable reproducibility and good stability. Moreover, the proposed immunosensors were used to analyze IL-6 in human serum specimens. Analytical results of clinical samples show the developed immunoassay has a promising alternative approach for detecting IL-6 in the clinical diagnosis.     

Comparison of the performance of immunosorbents prepared by site-directed or random coupling of monoclonal antibodies.

The majority of methods used to prepare immunosorbents immobilize antibodies through their reactive amino acid residues. The bound antibody activity of these immunosorbents is low. Hydrazide-based matrices couple antibodies through carbohydrate chains frequently located in the Fc region. This paper reports a comparative study of the performance of immunosorbents prepared by cyanogen bromide or hydrazide immobilization methods. The experiments utilized murine monoclonal antibodies to the human plasma proteins Factor IX or Protein C. The antibodies were immobilized at low densities to beaded agarose matrices which had similar properties. The hydrazide immunosorbents had binding efficiencies which were lower (anti-Factor IX) or up to 1.6-fold higher (anti-Protein C) than comparable cyanogen bromide coupled gels. However, there was no improvement in performance due to lower recoveries of bound protein from the hydrazide gels. Control experiments demonstrated that oxidation of antibody which is required for its coupling to hydrazide gels had no effect on antibody binding to antigen. Our results indicate that, as with cyanogen bromide coupling methods, site-directed immobilization through carbohydrate residues results in a restricted ability to bind to antigen. Both monoclonals were found to contain carbohydrate in their Fab' regions through which coupling may have occurred. The frequency of carbohydrate in the Fab region and the ability to control glycosylation at these sites are factors which may impact the utility of carbohydrate-directed immobilization of antibodies.     

Selective capillary coating materials for in-tube solid-phase microextraction coupled to liquid chromatography to determine drugs and biomarkers in biological samples: A review

In-tube solid-phase microextraction (in-tube SPME) coupled with high performance liquid chromatography (HPLC) or liquid chromatography coupled to mass spectrometry (LC-MS) successfully determines drugs or biomarkers in biological samples by direct sample injection or by simple sample treatment. This technique uses a capillary column as extraction device. Several capillaries (wall-coated open tubular, sorbent-packed, porous monolithic rods, or fiber-packed) with unique phases have been developed and evaluated, aiming to improve the efficiency and selectivity of the in-tube SPME-LC technique. This review describes new developments and applications occurred in recent years, and discusses future trends with emphasis on new extraction devices and current technology used for the synthesis of selective sorbents for bioanalysis, such as (i) polypyrrole, (ii) restricted-access materials, (iii) immunosorbents, (iv) molecular imprinting polymers, (v) monolithic polymers, and (vi) bi-functional materials.     

Polymeric cryogels as a new family of macroporous and supermacroporous materials for biotechnological purposes

The review is devoted to a specific kind of polymeric gels formed as a result of non-deep freezing of solutions or colloidal sols of the corresponding precursors. These materials are termed as cryogels. They possess a series of unique properties, first of all, the specific character of porosity (macroporous cryogels with the pore cross-section from tenth fractions of μm to ∼10 μm and supermacroporous (gigaporous) cryogels with pores of tens and hundreds of μm) and are attractive from the viewpoint of biotechnological implementation. Approaches to the preparation of the so-called “smart” composites based on the cryogels are considered. The use of various cryogels as carriers of immobilized biocatalysts (enzymes, cells), matrices for wide-porous affinity sorbents and immunosorbents, and spongy scaffolds for 3D culturing of animal cells is discussed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 996–1013, May, 2008.     

Liquid chromatography-(tandem) mass spectrometry of selected emerging pollutants (steroid sex hormones,drugs and alkylphenolic surfactants) in the aquatic environment

Among the various compounds considered as emerging pollutants, alkylphenolic surfactants, steroid sex hormones, and pharmaceuticals are of particular concern, both because of the volume of these substances used and because of their activity as endocrine disruptors or as causative agents of bacterial resistance, as is the case of antibiotics. Today, the technique of choice for analysis of these groups of substances is liquid-chromatography coupled to mass spectrometry (LC–MS) and tandem mass spectrometry (LC–MS–MS). In the last decades, this technique has experienced an impressive progress that has made possible the analysis of many environmental pollutants in a faster, more convenient, and more sensitive way, and, in some cases, the analysis of compounds that could not be determined before. This article reviews the LC–MS and LC–MS–MS methods published so far for the determination of alkylphenolic surfactants, steroid sex hormones and drugs in the aquatic environment. Practical considerations with regards to the analysis of these groups of substances by using different mass spectrometers (single quadrupole, ion trap and triple quadrupole instruments, etc.), interfaces and ionization and monitoring modes, are presented. Sample preparation aspects, with special focus on the application of advanced techniques, such as immunosorbents, restricted access materials and molecular imprinted materials, for extraction/purification of aquatic environmental samples and extracts are also discussed.     

Recent advances of online coupling of sample preparation techniques with ultra high performance liquid chromatography and supercritical fluid chromatography

Ultra high performance liquid chromatography and supercritical fluid chromatography techniques are favored because of their high efficiency and fast analysis speed. Although many sample preparation techniques have been coupled with common liquid chromatography online, the online coupling of sample preparation with the two popular chromatography techniques have gained increasing attention owing to the increasing requirements of efficiency and sensitivity. In this review, we have discussed and summarized the recent advances of the online coupling of sample preparation with ultra high performance liquid chromatography and supercritical fluid chromatography techniques. The main sample preparation techniques that have been coupled with ultra high performance liquid chromatography online are solid‐phase extraction and in‐tube solid‐phase microextraction, while solid‐phase extraction and supercritical fluid extraction are the main techniques that have been coupled with supercritical fluid chromatography online. Especially, the strategies for online coupling of sample preparation with chromatography techniques were summarized. Typical applications and growing trends of the online coupling techniques were also discussed in detail. With the increasing demands of improving the efficiency, throughput, and analytical capability toward complex samples of the analysis methods, online coupling of sample preparation with chromatography techniques will acquire further development.     

Critical comparison of automated purge and trap and solid-phase microextraction for routine determination of volatile organic compounds in drinking waters by GC-MS

The use of two automated sample preparation techniques, solid-phase microextraction (SPME) and purge and trap (P&T) systems are critically compared for the GC–MS determination of eight volatile organic compounds (VOCs), including trihalomethanes (THMs), in drinking water samples. Compounds chosen for the comparison are regulated by Spanish and European official guidelines for drinking waters. Experimental parameters investigated for the two sample preparation techniques included SPME type of fibers, SPME modality, P&T gas flow, extraction and desorption times and desorption temperatures. Thus, optimal experimental conditions have been worked out for the SPME and P&T techniques. Under such optimised conditions, detection limits, precision and accuracy were evaluated. Both methods fulfilled the values that the official guidelines establish. The P&T–GC–MS method offers LDs ranged from 0.004 to 0.2 ng mL⁻¹, repeatabilities below 6% and recoveries between 81 and 117%; while LDs ranging from 0.008 to 0.7 ng mL⁻¹, 1–12% R.S.D. and recoveries from 80 to 119% were achieved with the SPME–GC–MS method. Finally, we chose P&T–GC–MS method as the best for this determination and we validate this methodology by its application to the analysis of an Aquacheck Interlaboratory Exercise.     

The preparation and characterization of poly(o-phenylenediamine)/gold nanoparticles interface for immunoassay by surface plasmon resonance and electrochemistry

The poly-o-phenylenediamine (PoPD) nonconducting film and gold nanoparticles (AuNPs) were combined to fabricate AuNPs/PoPD film, which is used as a novel biocompatible interface for the immobilization of antibody and develop a simple and sensitive label-free immunoassay for the detection of the related antigen (human immunoglobulin G (IgG)). Surface plasmon resonance (SPR) and electrochemical methods were used to provide the real-time information about the polymer film growth, assembling of various sizes of gold nanoparticles, anti-human IgG antibody (anti-hIgG) immobilization and the antigen–antibody interaction. The microstructures of the PoPD and AuNPs/PoPD films were characterized by atomic force microscopy (AFM). These results demonstrated that AuNPs were uniformly dispersed on the porous surface of PoPD film, which formed a nano-structure biocompatible AuNPs/PoPD interface. The use of gold nanoparticles and PoPD film could enhance the immunoassay sensitivity and anti-nonspecific property of the resulting immunoassay electrode. Additionally, the reproducibility and preliminary application of anti-hIgG/AuNPs/PoPD/Au electrode for SPR detection of hIgG was also evaluated.     

Determination of antigen—antibody affinity by immuno-capillary electrophoresis

The use of affinity capillary electrophoresis for the characterization of antigen—antibody interactions (immuno-capillary electrophoresis) is shown using monoclonal antibodies against phosphotyrosine as a model system. The influence of the interaction kinetics on the peak profiles was demonstrated in experiments with addition of phosphotyrosine to the electrophoresis buffer. One of the two antibodies that were tested exhibited peak broadening while the other showed no change in peak shape but had a decreased mobility proportional to the amount of phosphotyrosine present. The migration shifts which were of the order 0.05 to 0.15 min at 439 V/cm were a consequence of the antibody—antigen complexes having a slower mobility than the non-complexed antibody. On the basis of measurement of migration shifts at different antigen concentrations, dissociation constants were estimated and shown to be independent on the applied field strength. Thus, when certain requirements are fulfilled, immuno-capillary electrophoresis is a fast and simple method for establishing binding characteristics of unlabelled antigen and antibody molecules under non-denaturing conditions and consumes minute amounts of sample.     

Applications of solid-phase microextraction in food analysis

Food analysis is important for the evaluation of the nutritional value and quality of fresh and processed products, and for monitoring food additives and other toxic contaminants. Sample preparation, such as extraction, concentration and isolation of analytes, greatly influences the reliable and accurate analysis of food. Solid-phase microextraction (SPME) is a new sample preparation technique using a fused-silica fiber that is coated on the outside with an appropriate stationary phase. Analyte in the sample is directly extracted to the fiber coating. The SPME technique can be used routinely in combination with gas chromatography (GC), GC–mass spectrometry (GC–MS), high-performance liquid chromatography (HPLC) or LC–MS. Furthermore, another SPME technique known as in-tube SPME has also been developed for combination with LC or LC–MS using an open tubular fused-silica capillary column as an SPME device instead of SPME fiber. These methods using SPME techniques save preparation time, solvent purchase and disposal costs, and can improve the detection limits. This review summarizes the SPME techniques for coupling with various analytical instruments and the applications of these techniques to food analysis.     

Practical approaches to fast gas chromatography-mass spectrometry

Fast gas chromatography–mass spectrometry (GC–MS) has the potential to be a powerful tool in routine analytical laboratories by increasing sample throughput and improving laboratory efficiency. However, this potential has rarely been met in practice because other laboratory operations and sample preparation typically limit sample throughput, not the GC–MS analysis. The intent of this article is to critically review current approaches to fast analysis using GC–MS and to discuss practical considerations in addressing their advantages and disadvantages to meet particular application needs. The practical ways to speed the analytical process in GC and MS individually and in combination are presented, and the trade-offs and compromises in terms of sensitivity and/or selectivity are discussed. Also, the five main current approaches to fast GC–MS are described, which involve the use of: (1) short, microbore capillary GC columns; (2) fast temperature programming; (3) low-pressure GC–MS; (4) supersonic molecular beam for MS at high GC carrier gas flow; and (5) pressure-tunable GC–GC. Aspects of the different fast GC–MS approaches can be combined in some cases, and different mass analyzers may be used depending on the analytical needs. Thus, the capabilities and costs of quadrupole, ion trap, time-of-flight, and magnetic sector instruments are discussed with emphasis placed on speed. Furthermore, applications of fast GC–MS that appear in the literature are compiled and reviewed. At this time, the future usefulness of fast GC–MS depends to some extent upon improvement of existing approaches and commercialization of interesting new techniques, but moreover, a greater emphasis is needed to streamline overall laboratory operations and sample preparation procedures if fast GC–MS is to become implemented in routine applications.     

Development of immunoaffinity columns for pyraclostrobin extraction from fruit juices and analysis by liquid chromatography with UV detection

Pyraclostrobin belongs to a new generation of fungicides widely used to preserve high valuable crops. In the present study, three monoclonal antibodies with different affinities to this modern strobilurin have been evaluated for their usefulness in the production of immunoaffinity columns suitable for the solid-phase extraction, concentration, and clean-up of residues from food commodities. Different immunosorbents were produced and characterized in terms of antibody immobilization efficiency, immunosorbent binding capacity, optimum elution conditions, and reusability. Covalent coupling of the antibodies to Sepharose-CNBr gel took place with high yield (over 90%), whereas the immunosorbent efficacy to retain the analyte (from 28 to 68%) was shown to depend on the amount and type of antibody immobilized on the support. As a matter of fact, columns prepared with the monoclonal antibody PYs5#14 were able to selectively bound up to 53 μg of pyraclostrobin per gram of beads. Acetonitrile solutions were preferred over methanolic ones for analyte elution, and some immunosorbents could be reused at least 4-6 times provided that the amount of pyraclostrobin and the volume of sample did not overload the column. Effectiveness of the selected immunoaffinity column was evidenced by the development of an extraction procedure for pyraclostrobin residues from fruit juices and further determination by high-performance liquid chromatography with UV detection. A concentration factor of 50 times was achieved with the developed immunoaffinity column, which eventually resulted in a limit of quantification of 0.01 mg L(-1). Finally, quantitative recoveries were obtained on apple juice and red grape must samples spiked with pyraclostrobin from 0.01 to 1 mg L(-1).