Decorated DNA-Based Scaffolds as Lateral Flow Biosensors

Here we develop Lateral Flow Assays (LFAs) that employ as functional elements DNA-based structures decorated with reporter tags and recognition elements. We have rationally re-engineered tile-based DNA tubular structures that can act as scaffolds and can be decorated with recognition elements of different nature (i.e. antigens, aptamers or proteins) and with orthogonal fluorescent dyes. As a proof-of-principle we have developed sandwich and competitive multiplex lateral flow platforms for the detection of several targets, ranging from small molecules (digoxigenin, Dig and dinitrophenol, DNP), to antibodies (Anti-Dig, Anti-DNP and Anti-MUC1/EGFR bispecific antibodies) and proteins (thrombin). Coupling the advantages of functional DNA-based scaffolds together with the simplicity of LFAs, our approach offers the opportunity to detect a wide range of targets with nanomolar sensitivity and high specificity.     

Binding Characteristics Study of DNA based Aptamers for E. coli O157:H7

E. coli O157:H7 is a pathogenic bacterium producing verotoxins that could lead to serious complications such as hemolytic uremia syndrome. Fast detection of such pathogens is important. For rapid detection, aptamers are quickly gaining traction as alternative biorecognition molecules besides conventional antibodies. Several DNA aptamers have been selected for E. coli O157:H7. Nonetheless, there has not been a comparative study of the binding characteristics of these aptamers. In this work, we present a comprehensive analysis of binding characteristics including binding affinity (K_d) and binding capacity (B_max) of DNA-based aptamers for E. coli O157:H7 using qPCR. Our results show that aptamer E18R has the highest binding capacity to E. coli 157:H7 and the highest specificity over non-pathogenic E. coli strains K12 and DH5α. Our study also finds that the common biotin-tag modification at 5′ end typically changes the binding capacity significantly. For most of the selected aptamers, the binding capacity after a biotin-tag modification decreases. There exists a discrepancy in the binding capability between the selected aptamer and the aptamer used for detection. Our study also shows that a lower concentration of Mg²⁺ ions in the binding buffer leads to a decrease in the binding capacity of E17F and E18R, while it does not affect the binding capacity of S1 and EcoR1.     

Quantitation of femtomolar protein levels via direct readout with the electrochemical proximity assay

We have developed a separation-free, electrochemical assay format with direct readout that is amenable to highly sensitive and selective quantitation of a wide variety of target proteins. Our first generation of the electrochemical proximity assay (ECPA) is composed of two thrombin aptamers which form a cooperative complex only in the presence of target molecules, moving a methylene blue (MB)-conjugated oligonucleotide close to a gold electrode. Without washing steps, electrical current is increased in proportion to the concentration of a specific target protein. By employing a DNA-based experimental model with the aptamer system, we show that addition of a short DNA competitor can reduce background current of the MB peak to baseline levels. As such, the detection limit of aptamer-based ECPA for human thrombin was 50 pM via direct readout. The dual-probe nature of ECPA gave high selectivity and 93% recovery of signal from 2.5 nM thrombin in 2% bovine serum albumin (BSA). To greatly improve the flexibility of ECPA, we then proved the system functional with antibody-oligonucleotide conjugates as probes; the insulin detection limit was 128 fM with a dynamic range of over 4 orders of magnitude in concentration, again with high assay selectivity. ECPA thus allows separation-free, highly sensitive, and highly selective protein detection with a direct electrochemical readout. This method is extremely flexible, capable of detecting a wide variety of protein targets, and is amenable to point-of-care protein measurement, since any target with two aptamers or antibodies could be assayed via direct electrochemical readout.     

Binding kinetics of human cellular prion detection by DNA aptamers immobilized on a conducting polypyrrole

We developed a biosensor based on the surface plasmon resonance (SPR) method for the study of the binding kinetics and detection of human cellular prions (PrP^C) using DNA aptamers as bioreceptors. The biosensor was formed by immobilization of various biotinylated DNA aptamers on a surface of conducting polypyrrole modified by streptavidin. We demonstrated that PrP^C interaction with DNA aptamers could be followed by measuring the variation of the resonance angle. This was studied using DNA aptamers of various configurations, including conventional single-stranded aptamers that contained a rigid double-stranded supporting part and aptamer dimers containing two binding sites. The kinetic constants determined by the SPR method suggest strong interaction of PrP^C with various DNA aptamers depending on their configuration. SPR aptasensors have a high selectivity to PrP^C and were regenerable by a brief wash in 0.1 M NaOH. The best limit of detection (4 nM) has been achieved with this biosensor based on DNA aptamers with one binding site but containing a double-stranded supporting part.

Kinetic capillary electrophoresis-based affinity screening of aptamer clones

DNA aptamers are single stranded DNA (ssDNA) molecules artificially selected from random-sequence DNA libraries for their specific binding to a certain target. DNA aptamers have a number of advantages over antibodies and promise to replace them in both diagnostic and therapeutic applications. The development of DNA aptamers involves three major stages: library enrichment, obtaining individual DNA clones, and the affinity screening of the clones. The purpose of the screening is to obtain the nucleotide sequences of aptamers and the binding parameters of their interaction with the target. Highly efficient approaches have been recently developed for the first two stages, while the third stage remained the rate-limiting one. Here, we introduce a new method for affinity screening of individual DNA aptamer clones. The proposed method amalgamates: (i) aptamer amplification by asymmetric PCR (PCR with a primer ratio different from unity), (ii) analysis of aptamer-target interaction, combining in-capillary mixing of reactants by transverse diffusion of laminar flow profiles (TDLFP) and affinity analysis using kinetic capillary electrophoresis (KCE), and (iii) sequencing of only aptamers with satisfying binding parameters. For the first time we showed that aptamer clones can be directly used in TDLFP/KCE-based affinity analysis without an additional purification step after asymmetric PCR amplification. We also demonstrated that mathematical modeling of TDLFP-based mixing allows for the determination of K_d values for the in-capillary reaction of an aptamer and a target and that the obtained K_d values can be used for the accurate affinity ranking of aptamers. The proposed method does not require the knowledge of aptamer sequences before screening, avoids lengthy (3-5 h) purification steps of aptamer clones, and minimizes reagent consumption to nanoliters.     

Structure-switching allosteric deoxyribozymes

DNA aptamers and DNA enzymes (DNAzymes or deoxyribozymes) are single-stranded DNA molecules with ligand-binding and catalytic capabilities, respectively. Allosteric DNA enzymes (aptazymes) are deoxyribozymes whose activity can be regulated by the binding state of an appended aptamer domain and have many potential uses in the fields of drug discovery and diagnostics. In this report, we describe a simple, yet potentially general, DNA aptazyme rational design strategy that requires no structural characterization of the constituent deoxyribozymes and aptamers. It is based on the concept originally developed in our laboratory for the design of structure-switching signaling aptamers that change structural states from a DNA-DNA duplex to a DNA-target complex upon target binding. In our new strategy, an antisense oligonucleotide is used to regulate the enzymatic activity of a linked aptamer-deoxyribozyme by annealing with a stretch of nucleotides on each side of the aptamer-DNAzyme junction. Structural reorganization of the aptamer domain upon target binding relieves the suppressive effect of this regulatory oligonucleotide on the attached DNA enzyme. Consequently, the target-binding event triggers the catalytic action of the aptazyme. We have demonstrated this concept using two RNA-cleaving deoxyribozymes, each adjoined to a DNA aptamer that binds ATP. These allosteric DNA enzymes exhibit the same ligand-binding specificity as the parental DNA aptamer and show up to 30-fold rate enhancement in the presence of ATP. The described methodology provides a convenient approach for rationally designing catalytic DNA-based biosensors.     

Aptasensor for Thrombin Based on Carbon Nanotubes‐Methylene Blue Composites

The amperometric and EQCM aptasensors based on DNA aptamers immobilized by avidin‐biotin method or by electrostatic adsorption onto multiwalled carbon nanotube layer contained methylene blue (MB) have been developed and examined for thrombin detection in buffer and in spiked blood serum. The presence of MB increases the binding capacity of the surface layer and enhances the range of thrombin concentrations to be determined. This results in significant improvement of analytical characteristics of thrombin detection. The EQCM aptasensors allowed us to detect 0.3–100 nM and amperometric aptasensors 10–1000 nM of thrombin.     

Electrochemical Aptasensors for Biological and Chemical Analyte Detection

Aptamers are short length, single-stranded DNA or RNA affinity molecules which interact with any desired targets such as biomarkers, cells, biological molecules, drugs or chemicals with high sensitivity. They have been extensively employed for medical applications due to having more advantages than the antibodies such as easier preparation and modification, higher stability, lower batch-to-batch variability and cost. Moreover, aptamers can be easily integrated efficiently with sensors, biosensors, actuators and other devices. In this review article, different applications of aptamers for biological and chemical molecules detection within the scope of electrochemical methods were presented with recent studies. In addition, the present status and future perspectives for highly-effective aptasensors for specific and selective analyte detection were discussed. As in stated throughout the review, combining of extraordinary properties of aptamers with the electrochemical-based biosensors could have improved the sensitivity of the assay and reduced limit of detection.     

Dynamic changes in DNA populations revealed by split–combine selection

Clickmers are chemically modified aptamers representing an innovative reagent class for developing binders for biomolecules with great impact on therapeutic and diagnostic applications. To establish a novel layer for screening various chemical entities, we developed a split–combine selection strategy simultaneously enriching for clickmers having different modifications. Due to the inherent design of this strategy, dynamic changes of DNA populations are traceable at an individual sequence level. Besides off-rate guided enrichment, the process makes the survival of the sequences most adapted to the applied selection condition observable. The underlying strategy provides unprecedented molecular insight into the selection process, based on which more sophisticated procedures will become pliable in the future.

A split-combine selection approach reveals dynamic population changes in DNA libraries during in vitro selection procedures.     

New trends in affinity sensing: aptamers for ligand binding

Aptamers are artificial nucleic acid ligands that can be generated against amino acids, drugs, proteins and other molecules. They are isolated from complex libraries of synthetic nucleic acids by an iterative process of adsorption, recovery and amplification. This review described the in vitro process to obtain aptamers (SELEX). It mentions the main characteristics of these molecules (i.e. affinity, specificity and stability). Moreover, it discusses advantages over antibodies. It reports potential applications of aptamers in analytical and diagnostic assays as biocomponents of biosensors (aptasensors) and allosteric ribozymes (aptazymes).     

Amplified impedimetric aptasensor based on gold nanoparticles covalently bound graphene sheet for the picomolar detection of ochratoxin A

An amplified electrochemical impedimetric aptasensor for ochratoxin A (OTA) was developed with picomolar sensitivity. A facile route to fabricate gold nanoparticles covalently bound reduced graphene oxide (AuNPs–rGO) resulted in a large number of well-dispersed AuNPs on graphene sheets with tremendous binding sites for DNA, since the single rGO sheet and each AuNP can be loaded with hundreds of DNA strands. An aptasensor with sandwich model was fabricated which involved thiolated capture DNA immobilized on a gold electrode to capture the aptamer, then the sensing interface was incubated with OTA at a desired concentration, followed by AuNPs–rGO functionalized reporter DNA hybridized with the residual aptamers. By exploiting the AuNPs–rGO as an excellent signal amplified platform, a single hybridization event between aptamer and reporter DNA was translated into more than 10⁷ redox events, leading to a substantial increase in charge-transfer resistance (R_ct) by 7∼ orders of magnitude compared with that of the free aptamer modified electrode. Such designed aptasensor showed a decreased response of R_ct to the increase of OTA concentrations over a wide range of 1 pg mL⁻¹–50 ng mL⁻¹ and could detect extremely low OTA concentration, namely, 0.3 pg mL⁻¹ or 0.74 pM, which was much lower than that of most other existed impedimetric aptasensors. The signal amplification platform presented here would provide a promising model for the aptamer-based detection with a direct impedimetric method.     

Structural Elucidation of the O-Antigen Polysaccharide from Escherichia coli O181

Shiga-toxin-producing Escherichia coli (STEC) is an important pathogen associated to food-borne infection in humans; strains of E. coli O181, isolated from human cases of diarrhea, have been classified as belonging to this pathotype. Herein, the structure of the O-antigen polysaccharide (PS) from E. coli O181 has been investigated. The sugar analysis showed quinovosamine (QuiN), glucosamine (GlcN), galactosamine (GalN), and glucose (Glc) as major components. Analysis of the high-resolution mass spectrum of the oligosaccharide (OS), obtained by dephosphorylation of the O-deacetylated PS with aqueous 48 % hydrofluoric acid, revealed a pentasaccharide composed of two QuiNAc, one GlcNAc, one GalNAc, and one Glc residue. The ¹H and ¹³C NMR chemical shift assignments of the OS were carried out using 1 D and 2 D NMR experiments, and the OS was sequenced using a combination of tandem mass spectrometry (MS/MS) data and NMR ¹³C NMR glycosylation shifts. The structure of the native PS was determined using NMR spectroscopy, and it consists of branched pentasaccharide repeating units joined by phosphodiester linkages: →4)[α-l-QuipNAc-(1→3)]-α-d-GalpNAc6Ac-(1→6)-α-d-Glcp-(1→P-4)-α-l-QuipNAc-(1→3)-β-d-GlcpNAc-(1→; the O-acetyl groups represent 0.4 equivalents per repeating unit. Both the OS and PSs exhibit rare conformational behavior since two of the five anomeric proton resonances could only be observed at an elevated temperature.     

Conformational Dynamics of DNA G-Quadruplex in Solution Studied by Kinetic Capillary Electrophoresis Coupled On-line with Mass Spectrometry

Invited for this months cover is the group of Prof. Maxim V. Berezovski. The cover picture shows the two-dimensional separation of unfolded (green) and folded (red) forms of G-quadruplex (GQ) DNA. The first dimension is kinetic capillary electrophoresis (KCE) separation of unfolded and folded DNA with different K⁺ concentrations in solution; the second dimension is ion mobility mass spectrometry separation of DNA conformers in the gas phase. DNA folding into a compact GQ structure is mediated by K⁺ ions. For more details, see the Full Paper on p. 58 ff.     

Hierarchical dendritic gold microstructure-based aptasensor for ultrasensitive electrochemical detection of thrombin using functionalized mesoporous silica nanospheres as signal tags

A sensitive electrochemical approach for the detection of thrombin was designed by using densely packed hierarchical dendritic gold microstructures (HDGMs) with secondary and tertiary branches as matrices, and thionine-functionalized mesoporous silica nanospheres as signal tags. To prepare the signal tags, the positively charged thionine (as an indicator) was initially adsorbed onto the mesoporous silica nanoparticles (MSNs). Then [AuCl₄]⁻ ions were in situ reduced on the thionine-modified MSNs by ascorbic acid to construct nanogold-decorated MSNs (GMSNs). The formed GMSNs were employed as label of the aminated aptamers. The assay was carried out in PBS, pH 7.4 with a sandwich-type assay mode by using the assembled thionine in the GMSNs as indicators. Compared with the pure silica nanoparticles, mesoporous silica could provide a larger surface for the immobilization of biomolecules and improve the sensitivity of the aptasensor. Under optimal conditions, the electrochemical aptasensors exhibited a wide linear range from 0.001 to 600 ng mL⁻¹ (i.e. 0.03 pM to 0.018 μM thrombin) with a low detection limit (LOD) of 0.5 pg mL⁻¹ (≈15 fM) thrombin at 3σ. No obvious non-specific adsorption was observed during a series of analyses to detect target analyte. The precision, selectivity and stability of the aptasensors were acceptable. Importantly, the methodology was evaluated with thrombin spiked samples in blank fetal calf serum, and the recoveries were 94.2–112%, indicating an exciting potential for thrombin detection.     

RE-SELEX: restriction enzyme-based evolution of structure-switching aptamer biosensors

Aptamers are widely employed as recognition elements in small molecule biosensors due to their ability to recognize small molecule targets with high affinity and selectivity. Structure-switching aptamers are particularly promising for biosensing applications because target-induced conformational change can be directly linked to a functional output. However, traditional evolution methods do not select for the significant conformational change needed to create structure-switching biosensors. Modified selection methods have been described to select for structure-switching architectures, but these remain limited by the need for immobilization. Herein we describe the first homogenous, structure-switching aptamer selection that directly reports on biosensor capacity for the target. We exploit the activity of restriction enzymes to isolate aptamer candidates that undergo target-induced displacement of a short complementary strand. As an initial demonstration of the utility of this approach, we performed selection against kanamycin A. Four enriched candidate sequences were successfully characterized as structure-switching biosensors for detection of kanamycin A. Optimization of biosensor conditions afforded facile detection of kanamycin A (90 μM to 10 mM) with high selectivity over three other aminoglycosides. This research demonstrates a general method to directly select for structure-switching biosensors and can be applied to a broad range of small-molecule targets.

RE-SELEX is the first homogenous method for in vitro evolution of structure-switching DNA aptamers.     

Aptamer binding assays for proteins: The thrombin example—A review

Experimentally selected single-stranded DNA and RNA aptamers are able to bind to specific target molecules with high affinity and specificity. Many analytical methods make use of affinity binding between the specific targets and their aptamers. In the development of these methods, thrombin is the most frequently used target molecule to demonstrate the proof-of-principle. This paper critically reviews more than one hundred assays that are based on aptamer binding to thrombin. This review focuses on homogeneous binding assays, electrochemical aptasensors, and affinity separation techniques. The emphasis of this review is placed on understanding the principles and unique features of the assays. The principles of most assays for thrombin are applicable to the determination of other molecular targets.     

Aptamer-based electrochemical sensors that are not based on the target binding-induced conformational change of aptamers

This study describes a new kind of aptamer-based electrochemical sensor that is not based on the target binding-induced conformational change of the aptamers by using a 15-mer thrombin-binding aptamer (5'-GGTTGGTGTGGTTGG-3') as the model oligonucleotide. The sensors are developed by first self-assembling the aptamer (i.e. a thrombin-binding aptamer) onto an Au electrode and then hybridizing the assembled aptamer with a ferrocene (Fc)-labeled short aptamer-complementary DNA oligonucleotide to form an electroactive double-stranded DNA (ds-DNA) oligonucleotide onto the Au electrode. The binding of the target (i.e. thrombin) towards the aptamer essentially destroys the Watson-Crick helix structure of the ds-DNA oligonucleotide assembled onto the electrode and leads to the dissociation of the Fc-labeled short complementary DNA oligonucleotide from the electrode surface to the solution, resulting in a decrease in the current signal obtained at the electrode, which can be used for the determination of the target. With the thrombin-binding aptamer as the model oligonucleotide, the current decrease obtained with the aptamer-based electrochemical sensors is linear with the concentration of thrombin within the concentration range from 0 to 10 nM (DeltaI/nA = 6.7C(thrombin)/nM + 2.8, gamma = 0.975). Unlike most kinds of existing aptamer-based electrochemical sensor, the electrochemical aptasensors demonstrated here are not based on the conformational change of the aptamers induced by the specific target binding. Moreover, the aptasensors are essentially label-free and are very responsive toward the targets. This study may pave a facile and general way to the development of aptamer-based electrochemical sensors.     

Cinnamide Derivatives of d‐Mannose as Inhibitors of the Bacterial Virulence Factor LecB from Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic Gram‐negative pathogen with high antibiotic resistance. Its lectin LecB was identified as a virulence factor and is relevant in bacterial adhesion and biofilm formation. Inhibition of LecB with carbohydrate‐based ligands results in a decrease in toxicity and biofilm formation. We recently discovered two classes of potent drug‐like glycomimetic inhibitors, that is, sulfonamides and cinnamides of d‐mannose. Here, we describe the chemical synthesis and biochemical evaluation of more than 20 derivatives with increased potency compared to the unsubstituted cinnamide. The structure–activity relationship (SAR) obtained and the extended biophysical characterization allowed the experimental determination of the binding mode of these cinnamides with LecB. The established surface binding mode now allows future rational structure‐based drug design. Importantly, all glycomimetics tested showed extended receptor residence times with half‐lives in the 5–20 min range, a prerequisite for therapeutic application. Thus, the glycomimetics described here provide an excellent basis for future development of anti‐infectives against this multidrug‐resistant pathogen.     

Highly Efficient Synthesis of Optically Pure (S)-1-phenyl-1,2-ethanediol by a Self-Sufficient Whole Cell Biocatalyst

Terminal vicinal diols are important chiral building blocks and intermediates in organic synthesis. Reduction of α-hydroxy ketones provides a straightforward approach to access these important compounds. In this study, it has been found that asymmetric reduction of a series of α-hydroxy aromatic ketones and 1-hydroxy-2-pentanone, catalyzed by Candida magnolia carbonyl reductase (CMCR) with glucose dehydrogenase (GDH) from Bacillus subtilis for cofactor regeneration, afforded 1-aryl-1,2-ethanediols and pentane-1,2-diol, respectively, in up to 99 % ee. In order to evaluate the efficiency of the bioreduction, lyophilized recombinant Escherichia coli whole cells coexpressing CMCR and GDH genes were used as the biocatalyst and α-hydroxy acetophenone as the model substrate, and the reaction conditions, such as pH, cosolvent, the amount of biocatalyst and the presences of a cofactor (i.e., NADP⁺), were optimized. Under the optimized conditions (pH 6, 16 h), the bioreduction proceeded smoothly at 1.0 m substrate concentration without the external addition of cofactor, and the product (S)-1-phenyl-1,2-ethanediol was isolated with 90 % yield and 99 % ee. This offers a practical biocatalytic method for the preparation of these important vicinal diols.