Hollow Metal–Organic-Framework-Mediated In Situ Architecture of Copper Dendrites for Enhanced CO2 Electroreduction

Electrocatalytic reduction of CO₂ to a single product at high current densities and efficiencies remains a challenge. However, the conventional electrode preparation methods, such as drop-casting, usually suffer from low intrinsic activity. Herein, we report a synthesis strategy for preparing heterogeneous electrocatalyst composed of 3D hierarchical Cu dendrites that derived from an in situ electrosynthesized hollow copper metal–organic framework (MOF), for which the preparation of the Cu-MOF film took only 5 min. The synthesis strategy preferentially exposes active sites, which favor's the reduction of CO₂ to formate. The current density could be as high as 102.1 mA cm⁻² with a selectivity of 98.2 % in ionic-liquid-based electrolyte and a commonly used H-type cell.     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.     

Metal–Organic Layers Leading to Atomically Thin Bismuthene for Efficient Carbon Dioxide Electroreduction to Liquid Fuel

Electrochemical reduction of CO₂ to valuable fuels is appealing for CO₂ fixation and energy storage. However, the development of electrocatalysts with high activity and selectivity in a wide potential window is challenging. Herein, atomically thin bismuthene (Bi-ene) is pioneeringly obtained by an in situ electrochemical transformation from ultrathin bismuth-based metal–organic layers. The few-layer Bi-ene, which possesses a great mass of exposed active sites with high intrinsic activity, has a high selectivity (ca. 100 %), large partial current density, and quite good stability in a potential window exceeding 0.35 V toward formate production. It even deliver current densities that exceed 300.0 mA cm⁻² without compromising selectivity in a flow-cell reactor. Using in situ ATR-IR spectra and DFT analysis, a reaction mechanism involving HCO₃⁻ for formate generation was unveiled, which brings new fundamental understanding of CO₂ reduction.     

Wurtzite CuGaS2 with an In-Situ-Formed CuO Layer Photocatalyzes CO2 Conversion to Ethylene with High Selectivity

We present surface reconstruction-induced C−C coupling whereby CO₂ is converted into ethylene. The wurtzite phase of CuGaS_2. undergoes in situ surface reconstruction, leading to the formation of a thin CuO layer over the pristine catalyst, which facilitates selective conversion of CO₂ to ethylene (C₂H₄). Upon illumination, the catalyst efficiently converts CO₂ to C₂H₄ with 75.1 % selectivity (92.7 % selectivity in terms of R_electron) and a 20.6 μmol g⁻¹ h⁻¹ evolution rate. Subsequent spectroscopic and microscopic studies supported by theoretical analysis revealed operando-generated Cu²⁺, with the assistance of existing Cu⁺, functioning as an anchor for the generated *CO and thereby facilitating C−C coupling. This study demonstrates strain-induced in situ surface reconstruction leading to heterojunction formation, which finetunes the oxidation state of Cu and modulates the CO₂ reduction reaction pathway to selective formation of ethylene.     

Regulating Efficient and Selective Single-atom Catalysts for Electrocatalytic CO2 Reduction

Anchoring transition metal (TM) atoms on suitable substrates to form single-atom catalysts (SACs) is a novel approach to constructing electrocatalysts. Graphdiyne with sp−sp² hybridized carbon atoms and uniformly distributed pores have been considered as a potential carbon material for supporting metal atoms in a variety of catalytic processes. Herein, density functional theory (DFT) calculations were performed to study the single TM atom anchoring on graphdiyne (TM₁−GDY, TM=Sc, Ti, V, Cr, Mn, Co and Cu) as the catalysts for CO₂ reduction. After anchoring metal atoms on GDY, the catalytic activity of TM₁−GDY (TM=Mn, Co and Cu) for CO₂ reduction reaction (CO₂RR) are significantly improved comparing with the pristine GDY. Among the studied TM₁−GDY, Cu₁−GDY shows excellent electrocatalytic activity for CO₂ reduction for which the product is HCOOH and the limiting potential (U_L) is −0.16 V. Mn₁−GDY and Co₁−GDY exhibit superior catalytic selectivity for CO₂ reduction to CH₄ with U_L of −0.62 and −0.34 V, respectively. The hydrogen evolution reaction (HER) by TM₁−GDY (TM=Mn, Co and Cu) occurs on carbon atoms, while the active sites of CO₂RR are the transition metal atoms . The present work is expected to provide a solid theoretical basis for CO₂ conversion into valuable hydrocarbons.     

Electron-Rich Bi Nanosheets Promote CO2⋅− Formation for High-Performance and pH-Universal Electrocatalytic CO2 Reduction

Electrochemical CO₂ reduction reaction (CO₂RR) to chemical fuels such as formate offers a promising pathway to carbon-neutral future, but its practical application is largely inhibited by the lack of effective activation of CO₂ molecules and pH-universal feasibility. Here, we report an electronic structure manipulation strategy to electron-rich Bi nanosheets, where electrons transfer from Cu donor to Bi acceptor in bimetallic Cu−Bi, enabling CO₂RR towards formate with concurrent high activity, selectivity and stability in pH-universal (acidic, neutral and alkaline) electrolytes. Combined in situ Raman spectra and computational calculations unravel that electron-rich Bi promotes CO₂⋅⁻ formation to activate CO₂ molecules, and enhance the adsorption strength of *OCHO intermediate with an up-shifted p-band center, thus leading to its superior activity and selectivity of formate. Further integration of the robust electron-rich Bi nanosheets into III–V-based photovoltaic solar cell results in an unassisted artificial leaf with a high solar-to-formate (STF) efficiency of 13.7 %.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

Tuning of Microenvironment in Covalent Organic Framework via Fluorination Strategy promotes Selective CO2 Capture

Herein, we have designed and synthesized two heteroatom (N, O) rich covalent organic frameworks (COF), PD-COF and TF-COF , respectively, to demonstrate their relative effect on CO₂ adsorption capacity and also CO₂/N₂ selectivity. Compared to the non-fluorinated PD-COF (BET surface area 805 m² g⁻¹, total pore volume 0.3647 ccg⁻¹), a decrease in BET surface area and also pore volume have been observed for fluorinated TF-COF due to the incorporation of fluorine to the porous framework (BET surface area 451 m² g⁻¹, total pore volume 0.2978 ccg⁻¹). This fact leads to an enormous decrease in the CO₂ adsorption capacity and CO₂/N₂ selectivity of TF-COF , though it shows stronger affinity towards CO₂ with a Qst of 37.76 KJ/mol. The more CO₂ adsorption capacity by PD-COF can be attributed to the large specific surface area with considerable amount of micropore volume compared to the TF-COF . Further, PD-COF exhibited CO₂/N₂ selectivity of 16.8, higher than that of TF-COF (CO₂/N₂ selectivity 13.4).     

Boosting Electroreduction of CO2 over Cationic Covalent Organic Frameworks: Hydrogen Bonding Effects of Halogen Ions

We present the first example of charged imidazolium functionalized porphyrin-based covalent organic framework (Co-iBFBim-COF-X) for electrocatalytic CO₂ reduction reaction, where the free anions (e.g., F⁻, Cl⁻, Br⁻, and I⁻) of imidazolium ions nearby the active Co sites can stabilize the key intermediate *COOH and inhibit hydrogen evolution reaction. Thus, Co-iBFBim-COF-X exhibits higher activity than the neutral Co-BFBim-COF, following the trend of F⁻<Cl⁻<Br⁻<I⁻. Particularly, the Co-iBFBim-COF-I⁻ showed nearly 100 % CO₂ selectivity at a low full-cell voltage of 2.3 V, and achieved a high CO₂ partial current density of 52 mA cm⁻² with a turnover frequency of 3018 h⁻¹ at 2.4 V in the anion membrane electrode assembly, which is 3.57 times larger than that of neutral Co-BFBim-COF. This work provides new insight into the importance of free anions in the stabilization of intermediates and decreasing the local binding energy of H₂O with active moiety to enhance CO₂ reduction reaction.     

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO₂ reduction reaction (CO₂RR) over Cu catalysts exhibits enormous potential for efficiently converting CO₂ to ethylene (C₂H₄). However, achieving high C₂H₄ selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO₂RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO₂ reduction to C₂H₄ products. An excellent Faraday efficiency (FE) of 63.6 % on C₂H₄ with a current density of 497.2 mA cm⁻² in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH₄. The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cu^δ+ during the CO₂RR. Furthermore, theoretical calculations demonstrate that the Cu^δ+/Cu⁰ interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C₂H₄ production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO₂ reduction to value-added chemicals.     

Cation Ordering and Exsolution in Copper-Containing Forms of the Flexible Zeolite Rho (Cu,M-Rho; M=H,Na) and Their Consequences for CO2 Adsorption

The flexibility of the zeolite Rho framework offers great potential for tunable molecular sieving. The fully copper-exchanged form of Rho and mixed Cu,H- and Cu,Na-forms have been prepared. EPR spectroscopy reveals that Cu²⁺ ions are present in the dehydrated forms and Rietveld refinement shows these prefer S6R sites, away from the d8r windows that control diffusion. Fully exchanged Cu-Rho remains in an open form upon dehydration, the d8r windows remain nearly circular and the occupancy of window sites is low, so that it adsorbs CO₂ rapidly at room temperature. Breakthrough tests with 10 % CO₂/40 % CH₄ mixtures show that Cu_4.9-Rho is able to produce pure methane, albeit with a relatively low capacity at this p_CO2 due to the weak interaction of CO₂ with Cu cations. This is in strong contrast to Na-Rho, where cations in narrow elliptical window sites enable CO₂ to be adsorbed with high selectivity and uptake but too slowly to enable the production of pure methane in similar breakthrough experiments. A series of Cu,Na-Rho materials was prepared to improve uptake and selectivity compared to Cu-Rho, and kinetics compared to Na-Rho. Remarkably, Cu,Na-Rho with >2 Cu cations per unit cell exhibited exsolution, due to the preference of Na cations for narrow S8R sites in distorted Rho and of Cu cations for S6R sites in the centric, open form of Rho. The exsolved Cu,Na-Rho showed improved performance in CO₂/CH₄ breakthrough tests, producing pure CH₄ with improved uptake and CO₂/CH₄ selectivity compared to that of Cu_4.9-Rho.     

Metal–Organic Layers Leading to Atomically Thin Bismuthene for Efficient Carbon Dioxide Electroreduction to Liquid Fuel

Electrochemical reduction of CO₂ to valuable fuels is appealing for CO₂ fixation and energy storage. However, the development of electrocatalysts with high activity and selectivity in a wide potential window is challenging. Herein, atomically thin bismuthene (Bi‐ene) is pioneeringly obtained by an in situ electrochemical transformation from ultrathin bismuth‐based metal–organic layers. The few‐layer Bi‐ene, which possesses a great mass of exposed active sites with high intrinsic activity, has a high selectivity (ca. 100 %), large partial current density, and quite good stability in a potential window exceeding 0.35 V toward formate production. It even deliver current densities that exceed 300.0 mA cm^?2 without compromising selectivity in a flow‐cell reactor. Using in situ ATR‐IR spectra and DFT analysis, a reaction mechanism involving HCO₃^? for formate generation was unveiled, which brings new fundamental understanding of CO₂ reduction.     

Relative Local Electron Density Tuning in Metal-Covalent Organic Frameworks for Boosting CO2 Photoreduction

The high local electron density and efficient charge carrier separation are two important factors to affect photocatalytic activity, especially for the CO₂ photoreduction reaction. However, the systematic studies on the structure-functional relationship regarding the above two factors based on precisely structure model are rarely reported. Herein, as a proof-of-concept, we developed a new strategy on the evaluation of local electron density by controlling the relative electron-deficient (ED) and electron-rich (ER) intensity of monomer at a molecular level based on three rational-designed vinylene-linked sp² carbon-covalent organic frameworks (COFs). As expected, the as-prepared vinylene-linked sp² carbon-conjugated metal-covalent organic framework (MCOFs) (VL-MCOF-1) with molecular junction exhibited excellent activities for CO₂-to-HCOOH conversion (283.41 μmol g⁻¹ h⁻¹) and high selectivity of 97.1 %, much higher than the VL-MCOF-2 and g-C₃₄N₆-COF, which is due to the synergistic effect of the multi-electronic metal clusters (Cu₃(PyCA)₃) (PyCA=pyrazolate-4-carboxaldehyde) as strong ER roles and cyanopyridine units as ED roles and active sites, as well as the boosted photo-induced charge separation efficiency of vinyl connection and increased light utilization ability. These results not only provide a strategy for regulating the electron-density distribution of photocatalysts at the molecular level but also offers profound insights for metal clusters-based COFs to effective CO₂ conversion.     

Accelerated Transfer and Spillover of Carbon Monoxide through Tandem Catalysis for Kinetics-boosted Ethylene Electrosynthesis

Cu-based catalysts have been widely applied in electroreduction of carbon dioxide (CO₂ER) to produce multicarbon (C₂₊) feedstocks (e.g., C₂H₄). However, the high energy barriers for CO₂ activation on the Cu surface is a challenge for a high catalytic efficiency and product selectivity. Herein, we developed an in situ *CO generation and spillover strategy by engineering single Ni atoms on a pyridinic N-enriched carbon support with a sodalite (SOD) topology (Ni-SOD/NC) that acted as a donor to feed adjacent Cu nanoparticles (NPs) with *CO intermediate. As a result, a high C₂H₄ selectivity of 62.5 % and an industrial-level current density of 160 mA cm⁻² at a low potential of −0.72 V were achieved. Our studies revealed that the isolated NiN₃ active sites with adjacent pyridinic N species facilitated the *CO desorption and the massive *CO intermediate released from Ni-SOD/NC then overflowed to Cu NPs surface to enrich the *CO coverage for improving the selectivity of CO₂ER to C₂H₄.     

Photo-thermal Cooperative Carbonylation of Ethanol with CO2 on Cu2O-SrTiCuO3-x

Carbonylation of ethanol with CO₂ as carbonyl source into value-added esters is of considerable significance and interest, while remains of great challenge due to the harsh conditions for activation of inert CO₂ in that the harsh conditions result in undesired activation of α-C−H and even cleavage of C−C bond in ethanol to deteriorate the specific activation of O−H bond. Herein, we propose a photo-thermal cooperative strategy for carbonylation of ethanol with CO₂, in which CO₂ is activated to reactive CO via photo-catalysis with the assistance of *H from thermally-catalyzed dissociation of alcoholic O−H bond. To achieve this proposal, an interfacial site and oxygen vacancy both abundant SrTiCuO_3-x supported Cu₂O (Cu₂O-SrTiCuO_3-x) has been designed. A production of up to 320 μmol g⁻¹ h⁻¹ for ethyl formate with a selectivity of 85.6 % to targeted alcoholic O−H activation has been afforded in photo-thermal assisted gas-solid process under 3.29 W cm⁻¹ of UV/Vis light irradiation (144 °C) and 0.2 MPa CO₂. In the photo-driven activation of CO₂ and following carbonylation, CO₂ activation energy decreases to 12.6 kJ mol⁻¹, and the cleavage of alcoholic α-C−H bond has been suppressed.     

Post-Nickelation of a Crystalline Trinuclear Copper Organic Framework for Synergistic Photocatalytic Carbon Dioxide Conversion

Rational regulation of electronic structures and functionalities of framework materials still remains challenging. Herein, reaction of 4,4′,4′′-nitrilo-tribenzhydrazide with tris(μ₂-4-carboxaldehyde-pyrazolato-N,N′)-tricopper (Cu₃Py₃) generates the crystalline copper organic framework USTB-11(Cu). Post-modification with divalent nickel ions affords the heterometallic framework USTB-11(Cu,Ni). Powder X-ray diffraction and theoretical simulations reveal their two-dimensional hexagonal structure geometry. A series of advanced spectroscopic techniques disclose the mixed Cu^I/Cu^II state nature of Cu₃Py₃ in USTB-11(Cu,Ni) with a uniform bistable Cu₃⁴⁺(Cu^I₂Cu^II) : Cu₃⁵⁺(Cu^ICu^II₂) (ca. 1 : 3) oxidation state, resulting in a significantly improved formation efficiency of the charge-separation state. This endows the Ni sites with enhanced activity and USTB-11(Cu,Ni) with outstanding photocatalytic CO₂ to CO performance with a conversion rate of 22 130 μmol g⁻¹ h⁻¹ and selectivity of 98 %.     

Copper-Sulfur-Nitrogen Cluster Providing a Local Proton for Efficient Carbon Dioxide Photoreduction

Atomically precise Cu clusters are highly desirable as catalysts for CO₂ reduction reaction (CO₂RR), and they provide an appropriate model platform for elaborating their structure–activity relationship. However, an efficient overall photocatalytic CO₂RR with H₂O using assembled Cu-cluster aggregates as single component photocatalyst has not been reported. Herein, we report a stable crystalline Cu−S−N cluster photocatalyst with local protonated N−H groups (denoted as Cu₆−NH ). The catalyst exhibits suitable photocatalytic redox potentials, high structural stability, active catalytic species, and a narrow band gap, which account for its outstanding photocatalytic CO₂RR performance under visible light, with ≈100 % selectivity for CO evolution. Remarkably, systematic isostructural Cu-cluster control experiments, in situ infrared spectroscopy, and density functional theory calculations revealed that the protonated pyrimidine N atoms in the Cu₆−NH cluster act as a proton relay station, providing a local proton during the photocatalytic CO₂RR. This efficiently lowers the energy barrier for the formation of the *COOH intermediate, which is the rate-limiting step, efficiently enhancing the photocatalytic performance. This work lays the foundation for the development of atomically precise metal-cluster-based photocatalysts.     

Construction of Asymmetrical Dual Jahn–Teller Sites for Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction (PCR) expresses great attraction to convert useless greenhouse gas into valuable chemical feedstock. However, the weak interactions between catalytic sites and PCR intermediates constrains the PCR activity and selectivity. Herein, we proposed a new strategy to match the intermediates due to the maximum orbital overlap of catalytic sites and C₁ intermediates by establishing dual Jahn–Teller (J–T) sites, in which, the strongly asymmetric J–T sites can break the nonpolar CO₂ molecules and self-adapt the different structure of C₁ intermediates. Taking cobalt carbonate hydroxide as an example, the weakly symmetric dual cobalt (Co₂) dual J–T sites, weakly asymmetric Fe&Co sites and strongly asymmetric Cu&Co sites were assembled. After illumination, the interaction between dual J–T sites and the CO₂ molecules enhances J–T distortion, which further modulates the PCR activity and selectivity. As a result, the Cu&Co sites exhibited CO yield of 8137.9 μmol g⁻¹, about 2.3-fold and 4.2-fold higher than that of the Fe&Co and Co₂ sites within 5-hour photoreaction, respectively. In addition, the selectivity achieved as high as 92.62 % than Fe&Co (88.67 %) and Co₂ sites (55.33 %). This work provides a novel design concept for the construction of dual J–T sites to regulate the catalytic activity and selectivity.     

Isolated Square‐Planar Copper Center in Boron Imidazolate Nanocages for Photocatalytic Reduction of CO2 to CO

Photocatalytic reduction of CO₂ to value‐added fuel has been considered to be a promising strategy to reduce global warming and shortage of energy. Rational design and synthesis of catalysts to maximumly expose the active sites is the key to activate CO₂ molecules and determine the reaction selectivity. Herein, we synthesize a well‐defined copper‐based boron imidazolate cage (BIF‐29) with six exposed mononuclear copper centers for the photocatalytic reduction of CO₂. Theoretical calculations show a single Cu site including weak coordinated water delivers a new state in the conduction band near the Fermi level and stabilizes the *COOH intermediate. Steady‐state and time‐resolved fluorescence spectra show these Cu sites promote the separation of electron–hole pairs and electron transfer. As a result, the cage achieves solar‐driven reduction of CO₂ to CO with an evolution rate of 3334 μmol g^?1 h^?1 and a high selectivity of 82.6 %.     

MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion

Electrocatalytic CO₂ reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti₃C₂T_x MXene-regulated Ag−ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag−ZnO/Ti₃C₂T_x catalyst achieves an outstanding CO₂ conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm⁻² at −0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag−ZnO interfaces contributes the high selectivity of CO. The CO₂ conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO₂ reduction.