Quantum chemical study of formation of Cu<Superscript>II</Superscript>–Y<Superscript>III</Superscript> metallamacrocyclic complexes based on glycinehydroximate ligands

The process of solution-phase formation of the Cu^II–Y^III 15-metallacrown-5 complexes bearing the glycinehydroximate ligands has been for the first time investigated by methods of quantum chemistry. The DFT modeling at the B3LYP/DGDZVP (PCM) level was carried out for mono-, bi-, and tri-nuclear copper(II) complexes and also for heteronuclear Cu^II–Y^III derivatives as the metallamacrocycle precursors. The dependence of relative stability of these complexes on the Cu^II and Y^III coordination surroundings and also on the mutual positions of ligands was found. The structural (variations of interatomic distances and valence angles), electronic (changes in the atomic charges and electron density), and thermodynamical (enthalpies and Gibbs free energies) regularities of 15-metallacrown-5 formation were revealed. The key role of Y^III cation was established for the process of formation of the polynuclear metallamacrocyclic compound (15-metallacrown-5).     

Relativistic coupled cluster calculations of the electronic structure of KrH<Superscript>+</Superscript>, XeH<Superscript>+</Superscript> and RnH<Superscript>+</Superscript>

Potential energy curves of NgH⁺ cations (Ng = Kr, Xe, Rn) were obtained by using four-component relativistic CCSD(T) coupled cluster calculations. Dissociation energies, equilibrium bond lengths, electronic properties, such as dipole moments and electric field gradients at the nuclei, and the related spectroscopic parameters of the electronic ground state have been determined. The results obtained for KrH⁺ and XeH⁺ are in good agreement with available experimental data, while those for RnH⁺ have been determined for the first time at this level of theory.     

Crystallinity of Dynasan<Superscript>®</Superscript>114 and Dynasan<Superscript>®</Superscript>118 matrices for the production of stable Miglyol<Superscript>®</Superscript>-loaded nanoparticles

This study focuses on the physicochemical characterization of lipid materials useful for the production of the so-called solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The chosen lipids were Dynasan^®114 (glyceril trimyristate) and Dynasan^®118 (glyceril tristearate) as solid lipids (SL), melting temperature above 80 °C, and Miglyol^®812 (caprylic/capric triglyceride) and Miglyol^®840 (propylene glycol dicaprylate/dicaprate) as liquid lipids (LL), crystallizing below ?15 °C. Raw lipids (pure or SL:LL mixtures) were analyzed by differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and Polarized Light Microscopy (PLM), before and after tempering at 80 °C for 1 h. The selected SL:LL combination was 70% (Dynasan^®114 and 118) and 30% (Miglyol^®812 and 840) for the production of SLN and NLC by high-pressure homogenization (HPH), respectively. Particles with a mean size of 200 nm (polydispersity index <0.329) and zeta potential of ?15 mV were obtained, and their long-term stability was confirmed for 3 months of storage at 7 °C.     

Triboluminescence of zirconium η<Superscript>5</Superscript>-complexes

This work describes a comparative study of tribo- and photoluminescence of metallocenes (Cp₂HfCl₂, Cp₂TiCl₂, Cp₂ZrCl₂, (CpMe)₂ZrCl₂, rac-Me₂C(3-Bu^t-Cp)₂ZrCl₂, Ind*₂ZrCl₂). Occurring under mechanodestruction of polycrystals, triboluminescence of zirconium bis-cyclopentadienyl complexes, Cp₂ZrCl₂, (CpMe)₂ZrCl₂, and rac-Me₂C(3-Bu^t-Cp)₂ZrCl₂ has been revealed for the first time. The triboluminescence spectrum in air is similar to the photoluminescence spectrum of zirconocene polycrystals. The triboluminescence spectrum does not show *N₂ luminescence. Ne and Ar lines are observed in the triboluminescence spectrum in the atmosphere of these gases. An increase in the number of substituents in zirconocene ligands leads to a bathochromic shift of the emission band maximum in triboluminescence spectra of the complexes. Possible mechanisms of zirconocene triboluminescence excitation are discussed.     

Coordinatively Unsaturated Polynuclear Mixed-Valent Sn<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> and Cu<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> Oxo-Centered Carboxylates

The tetranuclear mixed-valent oxo-cluster [Sn^IISn^IVO(O₂CCF₃)₄]₂ (1) has been prepared by reacting SnCl₂ with AgO₂CCF₃ in a sealed ampoule at 90 °C. Alternatively, 1 was obtained by acidolysis of Ph₃SnSnPh₃ with trifluoroacetic acid in solution. The X-ray diffraction study of 1 revealed the presence of a Sn^IIOSn₂^IVOSn^II core comprised of the penta-coordinated divalent and six-coordinated tetravalent tin atoms. The ¹¹⁹Sn NMR studies confirmed the stability of the cluster in solution and the presence of two different oxidation states of tin. An acidolysis of Ph₃SnSnPh₃ in the presence of [Cu₂^II(O₂CCF₃)₄] followed by sublimation of the resulting product at 90 °C afforded the first trinuclear mixed metal Sn–Cu cluster [(C₆H₅)₂Sn₂^IVCu^IIO(O₂CCF₃)₆] (2). The X-ray diffraction analysis of 2 revealed the presence of two phenyl groups attached to the six-coordinated tin(IV) atoms and the tetragonal pyramidal environment of the copper(II) atom. Both complexes have been obtained free of exogenous ligands.     

<Superscript>13</Superscript>C-labeled bilirubin: synthesis of 3<Superscript>1</Superscript>(3<Superscript>2</Superscript>),17<Superscript>1</Superscript>(17<Superscript>2</Superscript>)-di-[<Superscript>13</Superscript>C]-mesobilirubin-XIIIα

Abstract  The title compound, labeled with ¹³C in the ethyl groups was synthesized from K¹³CN and low-molecular-weight components. The synthetic relay compound was 3¹(3²)[¹³C]-xanthobilirubinic acid methyl ester in a synthetic route that leads to a label in the ethyl β-substituent of a dipyrrinone model for bilirubin. This labeled dipyrrinone was oxidatively coupled to the dimethyl ester of mesobiliverdin-XIIIα, thereby providing a route to a ¹³C-labeled mesobiliverdin and mesobilirubin, with one carbon of each ethyl being 98% ¹³C-enriched. Graphical Abstract        

Cis→Trans Isomerization of Pro<Superscript>7</Superscript> in Oxytocin Regulates Zn<Superscript>2+</Superscript> Binding

Ion mobility/mass spectrometry techniques are employed to investigate the binding of Zn²⁺ to the nine-residue peptide hormone oxytocin (OT, Cys¹-Tyr²-Ile³-Gln⁴-Asn⁵-Cys⁶-Pro⁷-Leu⁸-Gly⁹-NH₂, having a disulfide bond between Cys¹ and Cys⁶ residues). Zn²⁺ binding to OT is known to increase the affinity of OT for its receptor [Pearlmutter, A. F., Soloff, M. S.: Characterization of the metal ion requirement for oxytocin-receptor interaction in rat mammary gland membranes. J. Biol. Chem. 254, 3899–3906 (1979)]. In the absence of Zn²⁺, we find evidence for two primary OT conformations, which arise because the Cys⁶–Pro⁷ peptide bond exists in both the trans- and cis-configurations. Upon addition of Zn²⁺, we determine binding constants in water of K_A = 1.43 ± 0.24 and 0.42 ± 0.12 μM^?1, for the trans- and cis-configured populations, respectively. The Zn²⁺ bound form of OT, having a cross section of Ω = 235 Ų, has Pro⁷ in the trans-configuration, which agrees with a prior report [Wyttenbach, T., Liu, D., Bowers, M. T.: Interactions of the hormone oxytocin with divalent metal ions. J. Am. Chem. Soc. 130, 5993–6000 (2008)], in which it was proposed that Zn²⁺ binds to the peptide ring and is further coordinated by interaction of the C-terminal, Pro⁷-Leu⁸-Gly⁹-NH₂, tail. The present work shows that the cis-configuration of OT isomerizes to the trans-configuration upon binding Zn²⁺. In this way, the proline residue regulates Zn²⁺ binding to OT and, hence, is important in receptor binding.

Open image in new window

Graphical Abstract ?

     

Theoretical evaluation of the radiative lifetimes of LiCs and NaCs in the A<Superscript>1</Superscript>Σ<Superscript>+</Superscript> state

Calculations of the adiabatic potential energy curves and the transition dipole moments between the ground (A¹Σ⁺) and the first excited (A¹Σ⁺) states have been determined for the LiCs and NaCs molecules. The calculations are performed using an ab initio approach based on non-empirical pseudopotentials for Cs⁺, Li⁺ and Na⁺ cores, parameterized l-dependent polarization potentials and full configuration interaction calculations. The potential energy curves and the transition dipole moment are used to estimate the radiative lifetimes of the vibrational levels of the A⁺Σ⁺ state using the Franck–Condon (FC) approximation and the approximate sum rule method. The radiative lifetimes associated with the A⁺Σ⁺ state are presented here for the first time. These data can help experimentalists to optimize photoassociative formation of ultracold molecules and their longevity in a trap or in an optical lattice.     

Characterization and application of SuperLig<Superscript>®</Superscript> 620 solid phase extraction resin for automated process monitoring of <Superscript>90</Superscript>Sr

Characterization of SuperLig^® 620 solid phase extraction resin was performed in order to develop an automated on-line process monitor for ⁹⁰Sr. The main focus was on strontium separation from barium, with the goal of developing an automated separation process for ⁹⁰Sr in high-level wastes. High-level waste contains significant ¹³⁷Cs activity, of which ^137mBa is of great concern as an interference to the quantification of strontium. In addition barium, yttrium and plutonium were studied as potential interferences to strontium uptake and detection. A number of complexants were studied in a series of batch K_d experiments, as SuperLig^® 620 was not previously known to elute strontium in typical mineral acids. The optimal separation was found using a 2 M nitric acid load solution with a strontium elution step of ~0.49 M ammonium citrate and a barium elution step of ~1.8 M ammonium citrate. ⁹⁰Sr quantification of Hanford high-level tank waste was performed on a sequential injection analysis microfluidics system coupled to a flow-cell detector. The results of the on-line procedure are compared to standard radiochemical techniques in this paper.     

Cyclotron production of <Superscript>211</Superscript>At/<Superscript>211g</Superscript>Po by <Superscript>209</Superscript>Bi(α,2n) reaction

Astatine-211 (T _1/2 = 7.214 h) is an α-emitter at secular equilibrium by EC with its ultra-short-lived α-emitting daughter, polonium-211g (T _1/2 = 0.516 s), with a high Linear Energy Transfer (LET — 130 eV·nm⁻¹) and a half-life suitable for metabolic radiotherapy; the overall α branching of the ²¹¹At/^211gPo system is 100%. The direct production of ²⁰⁹Bi(α,2n)²¹¹At/^211gPo seems the most satisfactory method; Bi targets were irradiated at JRC-Ispra Cyclotron of European Commission, EC, using α-energy higher than 28.61 MeV in order to produce, via ²⁰⁹Bi(α,3n) reaction, small amounts of the γ-emitter ²¹⁰At (used as internal spike).     

Preparation of <Superscript>235m</Superscript>U targets for <Superscript>235</Superscript>U(n,n′)<Superscript>235m</Superscript>U cross section measurements

This paper describes the preparation of samples for an experiment to measure the cross-section for ²³⁵U(n,n′)^235mU in a fast fission spectrum of neutrons provided by a fast pulsed reactor/critical assembly. Samples of ^235mU have been prepared for the calibration of the internal conversion electron detector that is used for the ^235mU measurement. Two methods are described for the preparation of ^235mU. The first method used a U-Pu chemical separation based on anion-exchange chromatography and the second method used an alpha recoil collection method. Thin, uniform samples of ^235mU+²³⁵U were prepared for the experiment using electrodeposition.     

Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Nucleation of water vapor on Na<Superscript>+</Superscript>Cl<Superscript>−</Superscript> ion pairs: Computer simulation

The Monte Carlo method is used to calculate the free energy, entropy, and work of water cluster formation in the field of Na⁺Cl⁻ ion pairs. A detailed model is used that allows for polarization and covalent many-particle interactions, as well as the effects of ion charge reversal. The model is matched to the experimental data on the free energy of ion hydration and the results of the quantum-chemical calculations of stable configurations. The hydration leads to the cleavage of an ion pair in a molecular cluster after approximately ten water molecules are captured. As vapor molecules are added, the stable interion distance monotonically elongates. The low free energy barrier separating the dissociated and nondissociated states of the ion pair in an equilibrium cluster does not hinders the reversible spontaneous transitions between the states, which are responsible for strong fluctuations and the instability of the system. Unlike hydroxonium-containing ion pairs, the formation of long-lived metastable states of hydrated Na⁺Cl⁻ pairs is impossible.     

A simple and quick method for the preparation of radionuclide <Superscript>87</Superscript>Y/<Superscript>87m</Superscript>Sr generator using the <Superscript>nat</Superscript>Rb(α,xn)<Superscript>87</Superscript>Y reaction

A rapid method for the preparation of ⁸⁷Y/^87mSr radionuclide generator from a rubidium chloride target irradiated with 35 MeV α-particles is described. A simple two-step procedure is used to obtain a carrier-free ^87mSr isotope with a high enough radiochemical yield and high purity in the final aqueous fraction.     

Phase-transfer Tsuji—Trost allylation of CH-acids with the assistance of palladium complexes with bidentate P<Superscript>III</Superscript>—N—P<Superscript>III</Superscript> ligands

The Tsuji—Trost allylation of CH acids, in particular, those of the YCH₂CO₂Et type (Y = CO₂Et, C(O)Me, CN), with allylic acetates in the K₂CO₃—DMF system in the presence of palladium catalysts with ligands RN(PPh₂)₂ (R = Ph, Prⁱ, c-C₆H₁₁) is accomplished.     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

Comparison of sorption of Pb<Superscript>2+</Superscript> and Cd<Superscript>2+</Superscript> on Kaolinite clay and polyvinyl alcohol-modified Kaolinite clay

Kaolinite clay obtained from Ubulu-Ukwu, Delta state in Nigeria was modified with polyvinyl alcohol (PVA) reagent to obtain PVA-modified Kaolinite clay adsorbent. Scanning Electron Microscopy (SEM) of the PVA-modified adsorbent suggests that Kaolinite clay particles were made more compact in nature with no definite structure. Modification of Kaolinite clay with PVA increased its adsorption capacity for 300 mg/L Pb²⁺ and Cd²⁺ by a factor of at least 6, i.e., from 4.5 mg/g to 36.23 mg/g and from 4.38 mg/g to 29.85 mg/g, respectively, at 298 K. Binary mixtures of Pb²⁺ and Cd²⁺ decreased the adsorption capacity of Unmodified Kaolinite clay for Pb²⁺ by 26.3% and for Cd²⁺ by 0.07%, respectively. In contrast, for PVA-modified Kaolinite clay, the reductions were up to 50.9% and 58.5% for Pb²⁺ and Cd²⁺, respectively. The adsorption data of Pb²⁺ and Cd²⁺ onto both Unmodified and PVA-modified Kaolinite clay adsorbents were found to fit the Pseudo-Second Order Kinetic model (PSOM), indicating that adsorption on both surfaces was mainly by chemisorption and is concentration dependent. However, kinetic adsorption data from both adsorbent generally failed the Pseudo-First order Kinetic model (PFOM) test. Extents of desorption of 91% Pb²⁺ and 94% Cd²⁺ were obtained, using 0.1 M HCl, for the Unmodified Kaolinite clay adsorbent. It was found that 99% Pb²⁺ and 97% Cd²⁺, were desorbed, for PVA-modified Kaolinite clay adsorbents within 3 min for 60 mg/L of the metal ions adsorbed by the adsorbents.     

Formation of charged H<Subscript>3</Subscript>O<Superscript>+</Superscript> and OH<Superscript>–</Superscript> fragments at consistent shifts of protons in water clusters

Probable paths of consistent shifts of bridge protons within the hexamolecular rings of dodecamer water cluster at different arrangement of neighboring molecules are determined. As with individual rings, consistent shifts of protons in molecular cages are found to be promoted by contraction/extension of the oxygen skeleton. Transition states characterized by the formation of different numbers of such charged fragments as H₃O^δ+, H₅O₂^δ+, and OH^–, are identified. Conditions of the relatively long-term (about picoseconds) existence of the fragments in cluster systems are determined.     

Production possibility of <Superscript>186</Superscript>Re via the <Superscript>192</Superscript>Os(p,α3n)<Superscript>186</Superscript>Re nuclear reaction

Experimentally measured cross-sections are presented for the first time for the ¹⁹²Os(p,α3n)¹⁸⁶Re nuclear reaction up to 67 MeV. Highly enriched thin ¹⁹²Os targets (15 pcs), prepared by electro-deposition onto Cu backings, were irradiated with an external proton beam delivered by the SSC cyclotron of iThemba LABS. The excitation function curve of the ¹⁹²Os(p,α3n)¹⁸⁶Re reaction shows a maximum cross-section of ~82 mb at about 24 MeV. According to the yield calculations based on the present results, the available cumulative no-carrier-added ¹⁸⁶Re yield is 7.76 MBq/μAh (0.21 mCi/μAh) over the energy region 13.4 → 27.3 MeV.     

Validation of <Superscript>239,240</Superscript>Pu, <Superscript>238</Superscript>Pu separation method using molecular recognition product AnaLig<Superscript>®</Superscript> Pu02 gel and extraction chromatography TRU<Superscript>®</Superscript> resin

Two separation techniques for plutonium determination using AnaLig^® Pu02 molecular recognition technology product (MRT) and extraction chromatography TRU^® resin were tested. The methods performance was investigated by analysis of National Physical Laboratory (NPL-Alpha-Beta High, ABH 2003, 2005) intercomparison test samples. The results obtained for both procedures were compared in terms of activities and recoveries. Data analysis showed good agreement with the reference values. The AnaLig^® Pu02 separation method for ^239,240Pu, ²³⁸Pu determination was successfully validated with the same performance as the TRU^® resin method.