碳纳米管复合微球修饰L-色氨酸及其对LDL的吸附性能

本文以多孔碳纳米管/活性炭复合微球为载体,以L-色氨酸为配基,采用环氧氯丙烷偶联法,制得修饰L-色氨酸的碳纳米管/活性炭复合微球(L-CNTs/AC)。采用扫描电镜、氮气吸附、傅立叶红外光谱、热分析、X射线光电子能谱等对复合微球进行表征;通过体外静态吸附法对其低密度脂蛋白(LDL)吸附能力进行初步研究。结果表明:环氧氯丙烷偶联法可接枝上L-色氨酸。复合微球中碳纳米管加入量越多,对LDL的吸附能力越强;当碳纳米管加入量为45wt%时,对LDL的吸附量达4.623 mg·g-1,是未添加碳纳米管的2.3倍多。这是因为碳纳米管不仅可促进复合微球中20~100 nm孔的形成,而且还可促进复合微球配基修饰量的增多,从而大大增强了复合微球对LDL的吸附能力。此复合微球可望开发成一种新型的血液灌流LDL吸附剂。     

磺化碳纳米管/活性炭复合微球的制备及其对低密度脂蛋白的吸附性能

采用悬浮聚合、炭化、活化制得碳纳米管/活性炭复合微球; 而后利用重氮盐偶合法将对氨基苯磺酸接枝到此复合微球上, 得到磺化碳纳米管/活性炭复合微球; 将其用于吸附血清中的低密度脂蛋白(LDL). 结果表明: 所制备的磺化碳纳米管/活性炭复合微球球形度好, 表面光洁, 中孔发达, 并且接枝有对氨基苯磺酸. 此复合微球对LDL的吸附量随着碳纳米管加入量的增加而逐渐增大; 当碳纳米管加入量为45% (w)时, LDL吸附量达6.564 mg·g^-1, 是未添加碳纳米管的3.3倍. 此复合微球在作为血液灌流LDL吸附剂方面有较好的应用前景.     

基于碳纳米管负载的电催化剂高效检测还原型谷胱甘肽

通过两步法合成了10-甲基吩噻嗪/2-羟丙基-β-环糊精主客体化合物修饰的多壁碳纳米管复合材料MPT-HP-β-CD/MWNT,并用FT-IR、UV-Vis、荧光光谱、拉曼光谱、TEM等对其组成进行表征。通过CV曲线、i-t曲线对谷胱甘肽（GSH）的催化性能以及对催化剂阻抗的研究,证明了MWNT可以提高导电能力,提高对GSH的催化活性。此外,还研究了pH值、温度、扫速等对催化剂催化活性的影响,表明该复合材料可用于GSH的电化学检测,并具有良好的稳定性、重现性以及很高的灵敏度。最优检测浓度范围为5×10^-7~4.95×10^-5 mol·L^-1,检测限为3.96×10^-8 mol·L^-1（S/N=3）。     

碳纳米管/活性炭复合微球的制备及其对VB12的吸附应用

采用反相乳液法制备碳纳米管/壳聚糖复合微球(CNTs/CTS), 并对其进一步炭化、活化制得碳纳米管/活性炭复合微球(CNTs/AC). 以此复合微球为吸附材料, 探索了其对中分子代表物质VB12的吸附. 研究结果表明, 碳纳米管含量70%(w)的复合微球经水蒸气适当活化后球形度好、吸附性能优异, 其对VB12的吸附量达23.59 mg·g-1, 分别是活性炭和大孔吸附树脂的5.4和2.7倍. 分析表明这是由于碳纳米管/活性炭复合微球具有发达的中孔结构.     

磁性UiO-66复合材料的合成及其对水体中硝基酚有机分子的吸附性能

以溶剂热法制备了Fe₃O₄@SiO₂-PSS@UiO-66结构的磁性多孔复合材料,并利用XRD,TEM,SEM,IR,TG,VSM 和N₂吸附-脱附对样品的结构和形貌进行测试表征。研究结果表明：磁性UiO-66复合材料是以球型Fe₃O₄为核,MOF为壳的核-壳结构,其表面的MOF层由多个立方多晶堆积组装而成,且具有良好的超顺磁性。进一步研究了Fe₃O₄@SiO₂-PSS@UiO-66对2-硝基-1,3-苯二酚的吸附性能。探讨了吸附时间,吸附量和2-硝基-1,3-苯二酚初始浓度在吸附过程中的影响,结果表明：当吸附时间为12 h,吸附剂的用量为5 mg,2-硝基-1,3-苯二酚浓度为400 mg·L^-1时,最大吸附量为161.36 mg·g^-1。另外,磁性UiO-66复合材料对2-硝基-1,3-苯二酚高的吸附性能可能是由于UiO-66与2-硝基-1,3-苯二酚之间的静电作用以及二者之间苯环的π-π作用。     

聚[碳酸(亚丁酯-co-ε-己内酯)酯]的制备及其载药微球性能的研究

采用阴离子配位聚合方法, 合成了二氧化碳、1,2-环氧丁烷与ε-己内酯的三元共聚物: 聚[碳酸(亚丁酯-co-ε-己内酯)酯](PBCL). 并采用复相乳液(W/O/W)溶剂挥发法制备了包裹抗菌药物甲磺酸帕珠沙星的可降解微球. 对聚合物进行了FTIR, ¹H NMR, ¹³C NMR, DSC, TGA和WAXD等表征, 以及降解性能和载药微球特性的研究. 结果表明, PBCL热稳定性及降解性能优于聚碳酸亚丁酯(PBC). 所得PBCL微球球形规整、表面光滑. 大部分微球粒径在0.5～1 μm的范围内, 载药量和包封率分别达到38.21%和87.9%. 微球的体外释药性能研究在pH 7.4的磷酸缓冲溶液中进行, 释放21 d后, PBCL微球的累积释药量为84.74%, PBC微球的释药量仅为17.29%. 药物的体外释放行为符合Higuchi方程. PBCL载药微球具有长效缓释作用.     

NiⅡ-NTA修饰的银纳米粒/多孔硅芯片在线分离组氨酸标记蛋白和MALDI-TOF质谱检测

本文通过沉积在多孔硅表面的银纳米粒吸附对氨基苯硫酚和氨基的化学转化得到终端为Ni^Ⅱ-Nα,Nα-二(羧甲基)-L-赖氨酸水合物-即 Ni^Ⅱ-NTA体系的芯片。Ni^Ⅱ-NTA修饰的芯片被用于从高浓度的盐和助溶剂的缓冲体系中亲和捕获组氨酸标记的融合蛋白：thioredoxin-urodilatin和SUMO-hu-aprotinin,并进行在线的MALDI-TOF质谱检测,克服了MALDI-TOF质谱中直接点样污染物妨碍样品与基质共结晶的问题,避免了繁琐的离线样品预处理。芯片在线分离、纯化和MALDI-TOF质谱分析体系有望在复杂或原始体液的溶液中分析目标分子。     

表面图案化磁性复合微球的原位制备与表征

采用反相悬浮聚合法合成了丙烯酸(AA)含量不同的N-异丙基丙烯酰胺-丙烯酸共聚物P(NIPAM-co-AA)微凝胶, 并以其作为微反应器, 通过原位外源沉积法制备了一系列微米级、表面具有图案化结构的SiO₂-Fe₃O₄-P(NIPAM-co-AA)磁性复合微球. 实验结果表明, 复合微球的表面结构与微凝胶的组成、Fe₃O₄和SiO₂的沉积量有关. 在微球表面进行修饰, 可得到表面带有氨基等官能基团的磁性复合材料. 将这种功能化磁性微球用于识别生物大分子并进一步用于生物医学领域具有重要的意义.     

层状六边形Co1-xS修饰氮掺杂碳纳米管用于锂硫电池的硫载体

通过纳米结构材料的设计和组装来改善锂硫电池的电化学性能。在本工作中,成功合成了六边形Co_1-xS纳米片修饰的氮掺杂碳纳米管（Co_1-xS-CNT）复合材料,并将其用作锂硫电池（LSBs）的硫正极载体。在Co_1-xS-CNT/S中,极性六方Co_1-xS纳米片可以化学吸附多硫化锂,同时CNT可以为电极材料提供高导电网络。基于物理限域和化学吸附的协同作用,Co_1-xS-CNT/S正极表现出优异的电化学循环性能。在0.5C倍率下循环170次,电极仍可保持405.6 mAh·g^-1的放电比容量,同时具有超过99.2%的稳定库仑效率。     

中空纳米二氧化硅复合微球的制备及其对蛋白的亲和分离

利用水热法合成了中空巯基纳米二氧化硅微球(SiO₂-SH), 然后在其表面修饰亚氨基二乙酸基团(-IDA), 形成了中空SiO₂-SH/IDA双功能化纳米微球。利用该纳米微球表面的-SH和-IDA双功能团, 可以更多的吸附溶液中的Ni²⁺, 形成SiO₂-SH/IDA-Ni²⁺复合微球从而可以更好的分离以六聚组氨酸为标签的(His-tagged)蛋白。结果显示制备的样品对分离His-tagged蛋白具有广谱性, 并且具有较好的再生能力。     

Electrogenerated Chemiluminescence of Tris(2,2′‐bipyridyl)ruthenium(II) Immobilized in Humic Acid‐Silica‐Poly(vinyl alcohol) Composite Films

In this paper, we report the first attempt to use humic acid (HA) as modifiers to prepare the organic‐inorganic hybrid modified glassy carbon electrodes based on HA‐silica‐PVA (poly(vinyl alcohol)) sol‐gel composite. Electroactive species of tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy) ) can easily incorporate into the HA‐silica‐PVA films to form Ru(bpy) modified electrodes. The amount of Ru(bpy) incorporated in the composite films strongly depends on the amount of HA in the hybrid sol. Electrochemical and electrogenerated chemiluminescence (ECL) of Ru(bpy) immobilized in HA‐silica composite films coated on a glassy carbon electrode have been studied with tripropylamine (TPA) as the coreactant. The analytical performance of this modified electrode was evaluated in a flow injection analysis (FIA) system with a homemade flow cell. The as‐prepared electrode showed good stability and high sensitivity. The detection limits (S/N=3) were 0.050 μmol L^?1 for TPA and 0.20 μmol L^?1 for oxalate, and the linear ranges were from 0.10 μmol L^?1 to 1.0 mmol L^?1 for TPA and from 1.0 μmol L^?1 to 1.0 mmol L^?1 for oxalate, respectively. The resulting electrodes were stable over two months.     

Preparation and thermal properties of fatty acids/CNTs composite as shape-stabilized phase change materials

A series of fatty acids/carbon nanotubes (CNTs) composite shape-stabilized PCMs were prepared through infiltration method by using the eutectic mixture of capric acid, lauric acid, and palmitic acid as phase change materials, multi-walled CNTs as a supporting material. Nitrogen adsorption–desorption curves and SEM images of composite shape-stabilized PCMs indicate that the eutectic mixture was effectively absorbed into the porous structure of the CNTs. DSC thermograms show that the composite fatty acids/CNTs possess good phase change behavior. And the latent heat of the sample absorbed with 80 wt% fatty acids can achieve 101.6 J g^?1 in the melting process and its phase change temperatures and latent heat almost remain unchanged in 30 times of thermal cycling. Moreover, the thermal conductivity of the composite materials are significantly improved (up to 0.6661 W m^?1 k^?1) due to the addition of the highly thermal conductive CNTs.     

球形纤维素固定化DNA制备免疫吸附剂

以球形纤维素为载体,经环氧氯丙烷活化后共价键联小牛胸腺DNA,制备DNA免疫吸附剂,通过血液灌流能够治疗系统性红斑狼疮.对病人血清的吸附实验结果表明,每毫升吸附剂与3mL病人血清混合,于37℃保温1 h,可吸附除去40%～70%致病抗体     

Design of silica microparticles with oligopeptide brushes and their interaction with proteins

Synthesis of small oligopeptide brushes (oligo(S-benzyl-l-cysteine)) onto polyelectrolyte functionalized silica microparticles was developed. Poly(vinyl amine) (PVAm) adsorbed from salt-free and KCl 10⁻¹ mol L⁻¹ aqueous solution onto silica microparticles was chemically and naturally cross-linked by epichlorohydrin and CO₂, respectively. After the adsorption of PVAm onto microporous silica particles and stabilization by cross-linking, five repeated coupling reactions of Boc-S-benzyl-l-cysteine were performed. To test the protein interactions with the newly designed surface, human serum albumin (HSA) has been selected as a model protein. X-ray photoelectron spectroscopy, total organic carbon, potentiometric and polyelectrolyte titrations, and electrokinetic analysis were employed to obtain information about the polyelectrolyte adsorption and the amount of the amino acid S-benzyl-l-cysteine that was covalently bound to the solid surface and for determination of the protein amount adsorbed onto functionalized surface. The amount of HSA adsorbed onto modified silica microparticles decreased in order: silica/PVAm-cross-linked (silica/PVAm-C) (8.00 mg g⁻¹) > silica/PVAm-C/S-benzyl-l-cysteine (6.34 mg g⁻¹) > silica (4.86 mg g⁻¹) > silica/PVAm-C/(S-benzyl-l-cysteine)₅ (1.86 mg g⁻¹).     

Silver modified magnetic carbon nanotubes composite as a selective solid phase extractor for preconcentration and determination of trace mercury ions in water solution

A magnetic composite of silver/iron oxides/carbon nanotubes (Ag/Fe₃O₄/CNTs) was synthesized and used as an adsorbent for the preconcentration of mercury ions in water solutions at room temperature (25°C) in this study. The silver nanoparticles were supported on the magnetic CNTs. The modification enabled the composite had not only a high adsorption capacity for mercury ions (Hg²⁺) but also the magnetic isolation properties. A fast, sensitive, and simple method was successfully developed for the preconcentration and determination of trace amount of Hg²⁺ in water using the synthesized nanocomposite as adsorbent. The mercury concentration was determined by an atomic fluorescence spectrometer (AFS). The experimental conditions such as pH value, extraction temperature, extraction time, sample volume, eluent composition and concentration, sorbent amount, and coexisting ions were investigated for the optimization. A 500 mL of sample volume resulted in a preconcentration factor of 125. When a 200 mL of sample was employed, the limit of detection for Hg²⁺ was as low as 0.03 ng mL^?1with relative standard deviation of 4.4% at 0.1 ng mL^?1 (n = 7). The ease of synthesis and separation, the good adsorption capacity, and the satisfactory recovery will possibly make the composite an attractive adsorbent for the preconcentration of ultratrace Hg²⁺ in waters.     

Study on the interaction between an ionic liquid and L-tryptophan by fluorescence spectroscopic technique

In this work, the interaction of an ionic liquid (IL) 1-octyl-3-methylimidazolium chloride ([Omim]Cl) and L-tryptophan was investigated with fluorescence spectroscopic method. The quenching mechanism and binding characteristics of [Omim]Cl with L-tryptophan at different temperatures were studied from fluorescence measurement. The thermodynamic parameters such as free energy change (ΔG), enthalpy change (ΔH) and entropy change (ΔS), were calculated by thermodynamic equations. The experimental results indicated that [Omim]Cl and L-tryptophan had weak interaction and the mechanism of quenching belonged to static quenching. Hydrogen bonds and van der Waals interactions played important roles in the binding of [Omim]Cl with L-tryptophan.     

基于MIL⁃53(Al)的碳纳米管复合材料的制备及其用于超级电容器的性能

基于金属有机框架材料MIL?53(Al),制备出多孔碳原位生长碳纳米管(CNTs)的碳复合材料(C?MIL?53(Al)和C?Co@MIL?53(Al))。得益于MIL?53(Al)和CNTs的复合结构以及CoF2的形成,C?Co@MIL?53(Al)复合材料作为超级电容器电极时,在0.5 A·g^-1电流密度下展现出了高比电容(240.1 F·g^-1),并且经过2000次充放电循环后表现出良好的循环稳定性。     

Electroless Deposition of Thionin onto Glassy Carbon Electrode Modified with Single Wall and Multiwall Carbon Nanotubes: Improvement of the Electrochemical Reversibility and Stability

A simple procedure was developed to prepare a glassy carbon electrode modified with carbon nanotubes (CNTs) and thionin. Abrasive immobilization of CNTs on a GC electrode was achieved by gently rubbing the electrode surface on a filter paper supporting carbon nanotubes, then immersing the GC/CNTs‐modified electrode into a thionin solution (electroless deposition) for a short period of time (5–50 s for MWCNTs and 5–120 s for SWCNTs ). Cyclic voltammograms of the resulting modified electrode show stable and a well defined redox couple with surface confined characteristic at wide pH range 2–12. The electrochemical reversibility and stability of modified electrode prepared with incorporation of thionin into CNTs film was compared with usual methods for attachment of thionin to electrode surfaces such as electropolymerization and adsorption on the surface of preanodized electrodes. The formal potential of redox couple (E°′) shifts linearly toward the negative direction with increasing solution pH. The surface coverage of thionin immobilized on CNTs glassy carbon electrode was approximately 1.95×10^?10 mol cm^?2 and 3.2×10^?10 mol cm^?2 for MWCNTs and SWCNTs, respectively. The transfer coefficient (α) was calculated to be 0.3 and 0.35 and heterogeneous electron transfer rate constants (K_s) were 65 s^?1 and 55 s^?1 for MWCNTs/thionin and SWCNTs/thionin‐modified GC electrodes, respectively. The results clearly show a great facilitation of the electron transfer between thionin and CNTs adsorbed on the electrode surface. Excellent electrochemical reversibility of redox couple, high stability, technically simple and possibility of preparation at short period of time are of great advantages of this procedure for modification of electrodes.     

Characterization of wood fibers modified by phenol-formaldehyde

Wood-fiber phenol-formaldehyde-resin (PFR) modified surfaces, obtained from the adsorption of a PFR/water solution, are investigated as a function of the nature and the amount of PFR adsorbed. Surface are measurements are performed by using krypton adsorption at 77 K. Chemical modification is monitored by the electron spectroscopy for chemical analysis (ESCA) technique and the surface energy by the inverse phase gas chromatography (IPGC) method at infinite dilution. The London dispersive componentγ _S ^L of the surface energy shows a relationship to the concentration of carbon and oxgen at the fiber surface.γ _S ^L increases from 27.5 mN·m⁻¹ for the untreated fiber to 42.5 mN·m⁻¹ for the fibers treated with 20% high molecular-weight-grade phenol-formaldehyde. The surface atomic ratio O/C determined using the ESCA technique exhibits a decrease from 44% for untreated to 31% for treated samples. Surface area also decreases from 2.09 m²/g to 1.50 m²/g. The PFR adsorbed by wood fibers is observed as the dispersive component of surface energy starts to increase, as the surface oxygen concentration decreases, and on the surface area of the wood fiber.