Atomistic molecular dynamics simulation of benzene as a solute in a columnar discotic liquid crystal

A molecular dynamics simulation study on a binary liquid-crystalline mixture, where the solvent is the typical discogen hexakis-pentyloxy-triphenylene in its columnar state, while benzene is the solute, is reported. Both discotic and benzene molecules are modeled employing an atomistic force field. Attention has been paid to the structural and dynamic properties of benzene in this unusual environment, comparing these results with available experiments on the same or similar systems and with computer simulation data on neat liquid benzene.     

Polyunsaturated fatty acids in lipid bilayers: intrinsic and environmental contributions to their unique physical properties.

Polyunsaturated lipids are an essential component of biological membranes, influencing order and dynamics of lipids, protein-lipid interaction, and membrane transport properties. To gain an atomic level picture of the impact of polyunsaturation on membrane properties, quantum mechanical (QM) and empirical force field based calculations have been undertaken. The QM calculations of the torsional energy surface for rotation about vinyl-methylene bonds reveal low barriers to rotation, indicating an intrinsic propensity toward flexibility. Based on QM and experimental data, empirical force field parameters were developed for polyunsaturated lipids and applied in a 16 ns molecular dynamics (MD) simulation of a 1-stearoyl-2-docosahexaenoyl-sn-glyerco-3-phosphocholine (SDPC) lipid bilayer. The simulation results are in good agreement with experimental data, suggesting an unusually high degree of conformational flexibility of polyunsaturated hydrocarbon chains in membranes. The detailed analysis of chain conformation and dynamics by simulations is aiding the interpretation of experimental data and is useful for understanding the unique role of polyunsaturated lipids in biological membranes. The complete force field is included as Supporting Information and is available from http://www.pharmacy.umaryland.edu/faculty/amackere/research.html.     

Molecular dynamics simulations of structure and dynamics of organic molecular crystals

A set of model compounds covering a range of polarity and flexibility have been simulated using GAFF, CHARMM22, OPLS and MM3 force fields to examine how well classical molecular dynamics simulations can reproduce structural and dynamic aspects of organic molecular crystals. Molecular structure, crystal structure and thermal motion, including molecular reorientations and internal rotations, found from the simulations have been compared between force fields and with experimental data. The MM3 force field does not perform well in condensed phase simulations, while GAFF, CHARMM and OPLS perform very similarly. Generally molecular and crystal structure are reproduced well, with a few exceptions. The atomic displacement parameters (ADPs) are mostly underestimated in the simulations with a relative error of up to 70%. Examples of molecular reorientation and internal rotation, observed in the simulations, include in-plane reorientations of benzene, methyl rotations in alanine, decane, isopropylcyclohexane, pyramidal inversion of nitrogen in amino group and rotation of the whole group around the C-N bond. Frequencies of such dynamic processes were calculated, as well as thermodynamic properties for reorientations in benzene and alanine. We conclude that MD simulations can be used for qualitative analysis, while quantitative results should be taken with caution. It is important to compare the outcomes from simulations with as many experimental quantities as available before using them to study or quantify crystal properties not available from experiment.     

A nonadditive methanol force field: bulk liquid and liquid-vapor interfacial properties via molecular dynamics simulations using a fluctuating charge model

We study the bulk and interfacial properties of methanol via molecular dynamics simulations using a CHARMM (Chemistry at HARvard Molecular Mechanics) fluctuating charge force field. We discuss the parametrization of the electrostatic model as part of the ongoing CHARMM development for polarizable protein force fields. The bulk liquid properties are in agreement with available experimental data and competitive with existing fixed-charge and polarizable force fields. The liquid density and vaporization enthalpy are determined to be 0.809 g/cm3 and 8.9 kcal/mol compared to the experimental values of 0.787 g/cm3 and 8.94 kcal/mol, respectively. The liquid structure as indicated by radial distribution functions is in keeping with the most recent neutron diffraction results; the force field shows a slightly more ordered liquid, necessarily arising from the enhanced condensed phase electrostatics (as evidenced by an induced liquid phase dipole moment of 0.7 D), although the average coordination with two neighboring molecules is consistent with the experimental diffraction study as well as with recent density functional molecular dynamics calculations. The predicted surface tension of 19.66+/-1.03 dyn/cm is slightly lower than the experimental value of 22.6 dyn/cm, but still competitive with classical force fields. The interface demonstrates the preferential molecular orientation of molecules as observed via nonlinear optical spectroscopic methods. Finally, via canonical molecular dynamics simulations, we assess the model's ability to reproduce the vapor-liquid equilibrium from 298 to 423 K, the simulation data then used to obtain estimates of the model's critical temperature and density. The model predicts a critical temperature of 470.1 K and critical density of 0.312 g/cm3 compared to the experimental values of 512.65 K and 0.279 g/cm3, respectively. The model underestimates the critical temperature by 8% and overestimates the critical density by 10%, and in this sense is roughly equivalent to the underlying fixed-charge CHARMM22 force field.     

Enthalpies of mixing predicted using molecular dynamics simulations and OPLS force field

Enthalpy of mixing (EOM) is one of the most basic thermodynamic properties of mixtures. To assess feasibility of predicting EOM using force field simulation methods, fifteen (15) representative binary mixtures were investigated using MD simulations based on OPLS and TIP4P force fields. The simulation conditions and errors were carefully examined. The precision level of 0.04 kJ/mol was obtained for calculated EOM data. However, the predictions, measured by deviations from experimental data, were only qualitatively correct. Among various factors influencing the accuracy of predictions, force field quality representing interactions among different molecules plays the most significant role. Using methanol/benzene and ethanol/benzene as examples, we demonstrated that non-additive interaction terms between polarizable atoms can be used to significantly improve the quality of predictions. In addition, it appears that charge-dependent LJ parameters are required in order to represent the polarization effects accurately.     

Calculations of the structural and thermodynamic characteristics of copper carbonates by quantum-chemical methods

The possibility of using the PM5 semiempirical method and the LADY program for calculations of the vibrational properties and thermodynamic characteristics of copper carbonates, malachite and azurite, was considered. The infrared and Raman spectra of these minerals were calculated using the valence force field model of the theory of crystal lattice dynamics with varying force constants. The results closely agreed with the calorimetric and spectroscopic experimental data.     

Evaluation of force fields for molecular simulation of polyhedral oligomeric silsesquioxanes

Polyhedral oligomeric silsesquioxanes (POSS) are nanometer-size molecules suitable for the production of organic-inorganic nanocomposite materials. These organic-inorganic nano-building blocks show promise for enabling the production of polymeric materials of exceptional mechanical properties as well as novel composite materials. While the experimental studies of these materials have rapidly evolved in the past decade, their theoretical investigation is still in its infancy. Toward the validation of force fields for the molecular simulation of POSS-containing systems, we present the charge-transfer reactive (CTR) force field for the molecular simulation of polyhedral oligomeric silsesquioxane (POSS) molecules and compare the ability of this, and several force fields taken from the literature, to predict the thermophysical properties of POSS-containing systems. The literature force fields compared include the universal force field (UFF) and the COMPASS and Hybrid-COMPASS force fields. Predictions from molecular dynamics simulations of the structural parameters (unit cell vectors), melting temperature, and FT-IR spectra of crystals of POSS monomers are presented. The POSS monomers investigated are octahydride, octamethyl, and octapropyl POSS. Predicted quantities are compared to experimental results where available and provide molecular-level physical insight into several aspects of the behavior of POSS molecules. While all the force fields tested perform reasonably well, our results indicate that the Hybrid-COMPASS and CTR force fields predict structural properties that are in good agreement with experimental data.     

CH/pi interactions involving aromatic amino acids: refinement of the CHARMM tryptophan force field

High-level ab initio calculations have been carried out to study weak CH/pi interactions and as a check of the CHARMM force field for aromatic amino acids. Comparisons with published data indicate that the MP2/cc-pVTZ level of theory is suitable for calculations of CH/pi interaction, including the T-shape benzene dimer. This level of theory was, therefore, applied to investigate CH/pi interactions between ethene or cis-2-butene and benzene in a variety of orientations. In addition, complexes between ethene and a series of model compounds (toluene, methylindole and p-cresol) representing the aromatic amino acids were studied motivated by the presence of CH/pi interactions in biological systems. Ab initio binding energies were compared to the binding energies obtained with the CHARMM22 force field. In the majority of orientations, CHARMM22 reproduces the preferred binding modes, with excellent agreement for the benzene dimer. Small discrepancies found in the calculations involving methylindole along with a survey of published thermodynamic data for the aromatic amino acids prompted additional optimization of the tryptophan force field. Partial atomic charges, Lennard-Jones parameters, and force constants were improved to obtain better intra- and intermolecular properties, with significant improvements obtained in the reproduction of experimental heats of sublimation for indole and free energies of aqueous solvation for methylindole.     

The COMPASS force field: parameterization and validation for phosphazenes

A new, condensed-phase optimised ab-initio force field, COMPASS, has been developed recently. In this paper, the validation of COMPASS for phosphazenes is presented. The functional forms of this force field are of the consistent force field (CFF) type. Charges and bonded terms were derived from HF/6–31G1 calculations, while the nonbonded parameters (L-J 9-6 vdW potential) were initially transferred from the polymer consistent force field, pcff, and optimised using MD simulations of condensed-phase properties. As a validation of COMPASS, molecular mechanics calculations and molecular dynamics simulations have been made on a number of isolated molecules, liquids, and crystals. The calculated molecular structure, vibration frequencies, conformational properties for isolated molecules, crystal cell parameters and density, liquid density, and heat of evaporation agreed favourably with most experimental data. The special conformational properties of the tetracyclophosphazenes, (NPCI₂)₄ and (NPF₂)₄, in the solid state are discussed based on molecular mechanics and CASTEP ab-initio calculations. The effect of nonbonded cutoff distance and different algorithms for pressure control in NPT simulation was also investigated. Finally, molecular dynamics using the COMPASS force field was used to predict properties of three isomers of high-molecular-weight amorphous poly(dibutoxyphosphazenes). In this case, excellent agreement was achieved between densities and glass transition temperatures obtained from dynamics and experimental data.     

A partition function‐based weighting scheme in force field parameter development using ab initio calculation results in global configurational space

In force field parameter development using ab initio potential energy surfaces (PES) as target data, an important but often neglected matter is the lack of a weighting scheme with optimal discrimination power to fit the target data. Here, we developed a novel partition function‐based weighting scheme, which not only fits the target potential energies exponentially like the general Boltzmann weighting method, but also reduces the effect of fitting errors leading to overfitting. The van der Waals (vdW) parameters of benzene and propane were reparameterized by using the new weighting scheme to fit the high‐level ab initio PESs probed by a water molecule in global configurational space. The molecular simulation results indicate that the newly derived parameters are capable of reproducing experimental properties in a broader range of temperatures, which supports the partition function‐based weighting scheme. Our simulation results also suggest that structural properties are more sensitive to vdW parameters than partial atomic charge parameters in these systems although the electrostatic interactions are still important in energetic properties. As no prerequisite conditions are required, the partition function‐based weighting method may be applied in developing any types of force field parameters. © 2013 Wiley Periodicals, Inc.     

Solvation properties of N-acetyl-β-glucosamine: molecular dynamics study incorporating electrostatic polarization

N-Acetyl-β-glucosamine (NAG) is an important moiety of glycoproteins and is involved in many biological functions. However, conformational and dynamical properties of NAG molecules in aqueous solution, the most common biological environment, remain ambiguous due to limitations of experimental methods. Increasing efforts are made to probe structural properties of NAG and NAG-containing macromolecules, like peptidoglycans and polymeric chitin, at the atomic level using molecular dynamics simulations. In this work, we develop a polarizable carbohydrate force field for NAG and contrast simulation results of various properties using this novel force field and an analogous nonpolarizable (fixed charge) model. Aqueous solutions of NAG and its oligomers are investigated; we explore conformational properties (rotatable bond geometry), electrostatic properties (dipole moment distribution), dynamical properties (self-diffusion coefficient), hydrogen bonding (water bridge structure and dynamics), and free energy of hydration. The fixed-charge carbohydrate force field exhibits deviations from the gas phase relative rotation energy of exocyclic hydroxymethyl side chain and of chair/boat ring distortion. The polarizable force field predicts conformational properties in agreement with corresponding first-principles results. NAG-water hydrogen bonding pattern is studied through radial distribution functions (RDFs) and correlation functions. Intermolecular hydrogen bonding between solute and solvent is found to stabilize NAG solution structures while intramolecular hydrogen bonds define glycosidic linkage geometry of NAG oligomers. The electrostatic component of hydration free energy is highly dependent on force field atomic partial charges, influencing a more favorable free energy of hydration in the fixed-charge model compared to the polarizable model.     

Reverse nonequilibrium molecular-dynamics calculation of the Soret coefficient in liquid benzene/cyclohexane mixtures

Reverse nonequilibrium molecular dynamics is the method applied here for the investigation of thermal diffusion in realistic molecular fluids. The Soret coefficients of benzene/cyclohexane mixtures are calculated using an all-atom model. The autocorrelation functions indicate that the mole fraction gradient converges much slower than the temperature gradient. Compared to experimental data, the results show the same tendency of the Soret coefficient variation versus the mole fraction. Although a systematic error exists for the magnitude of the Soret coefficient, a meanwhile systematic error for both the mutual diffusion and thermal diffusion coefficients provides some explanation of it; and the calculation with different force field parameters indicates a possibility to annihilate the systematic error. The influences of algorithm variables such as cutoff lengths and perturbation intensities are tested. Furthermore the temperature dependence of the Soret effect is observed, yielding the same trend as previous studies.     

An ab initio force field for the cofactors of bacterial photosynthesis

This article presents a new ab initio force field for the cofactors of bacterial photosynthesis, namely quinones and bacteriochlorophylls. The parameters has been designed to be suitable for molecular dynamics simulations of photosynthetic proteins by being compatible with the AMBER force field. To our knowledge, this is the first force field for photosynthetic cofactors based on a reliable set of ab initio density functional reference data for methyl bacteriochlorophyll a, methyl bacteriopheophytin a, and of a derivative of ubiquinone. Indeed, the new molecular mechanics force field is able to reproduce very well not only the experimental and ab initio structural properties and the vibrational spectra of the molecules, but also the eigenvectors of the molecular normal modes. For this reason it might also be helpful to understand vibrational spectroscopy results obtained on reaction center proteins.     

Transferable potentials for phase equilibria. 9. Explicit hydrogen description of benzene and five-membered and six-membered heterocyclic aromatic compounds

The explicit hydrogen version of the transferable potentials for phase equilibria (TraPPE-EH) force field is extended to benzene, pyridine, pyrimidine, pyrazine, pyridazine, thiophene, furan, pyrrole, thiazole, oxazole, isoxazole, imidazole, and pyrazole. While the Lennard-Jones parameters for carbon, hydrogen (two types), nitrogen (two types), oxygen, and sulfur are transferable for all 13 compounds, the partial charges are specific for each compound. The benzene dimer energies for sandwich, T-shape, and parallel-displaced configurations obtained for the TraPPE-EH force field compare favorably with high-level electronic structure calculations. Gibbs ensemble Monte Carlo simulations were carried out to compute the single-component vapor-liquid equilibria for benzene, pyridine, three diazenes, and eight five-membered heterocycles. The agreement with experimental data is excellent with the liquid densities and vapor pressures reproduced within 1 and 5%, respectively. The critical temperatures and normal boiling points are predicted with mean deviations of 0.8 and 1.6%, respectively.     

Simulation of phase separation in alcohol/water mixtures using two-body force field and standard molecular dynamics

Standard molecular dynamics simulations have been carried out on pure alcohols and alcohol/water mixtures. A simple atom-atom force field consisting of Lennard-Jones potentials plus coulombic terms over atomic point charges, but without explicit polarization terms, has been specifically fitted to reproduce several experimental properties of the pure alcohols, and has been used for mixtures by developing combination rules with the TIP3P water model. Densities, enthalpies of vaporization, radial distribution functions, self-diffusion coefficients, and rotational correlation functions of the pure alcohols are well reproduced and compare favorably with those from more sophisticated force fields. Some key aspects of the phase behaviour are correctly reproduced by the molecular dynamics simulation, showing a distinct demixing process for the n-butanol/water mixture as opposed to the stability of the t-butanol/water mixtures. The results demonstrate the ability of a molecular dynamics simulation, even in its standard form and with easily accessible time ranges, but with a carefully optimized force field, to simulate and, to a certain extent, predict the properties of binary mixtures.     

Molecular dynamics simulations of the melting of 1,3,3-trinitroazetidine

Physical properties of condensed-phase 1,3,3-trinitroazetidine (TNAZ) have been computed with molecular dynamics (MD) and a nonreactive, fully flexible force field formulated by combining the intramolecular interactions obtained from the Generalized AMBER Force Field and the rigid-molecule force field developed by Sorescu-Rice-Thompson [J. Phys. Chem. B 1997, 101, 798] (AMBER-SRT). The results are compared with MD calculations, using the AMBER force field. The predicted densities of crystalline TNAZ from both force fields are about 10% lower than the experimental value. The calculated thermodynamic melting point at 1 atm from the AMBER-SRT force field is 390 K, in good agreement with the measured value of 374 K, while the AMBER force field predicts a thermodynamic melting point of 462 K. The lattice parameters and the molecular and crystal structures calculated with the AMBER-SRT force field are in excellent agreement with experiment. Simulations with the AMBER-SRT force field were also used to generate the isotherm of TNAZ up to 4 GPa and the bulk modulus and its pressure derivative.     

Energy dispersive X-ray diffraction and molecular dynamics meet: The structure of liquid pyrrole

In this work, a coupled experimental–theoretical protocol for the study of molecular liquids is reported. Energy dispersive X-ray diffraction results are successfully interpreted with molecular dynamics. Several models, differing for geometry and force field are presented; their behavior in reproducing experimental data is discussed.     

Using PC clusters to evaluate the transferability of molecular mechanics force fields for proteins

The transferability of molecular mechanics parameters derived for small model systems to larger biopolymers such as proteins can be difficult to assess. Even for small peptides, molecular dynamics simulations are typically too short to sample structures significantly different than initial conformations, making comparison to experimental data questionable. We employed a PC cluster to generate large numbers of native and non-native conformations for peptides with experimentally measured structural data, one predominantly helical and the other forming a beta-hairpin. These atomic-detail sets do not suffer from slow convergence, and can be used to rapidly evaluate important force field properties. In this case a suspected bias toward alpha-helical conformations in the ff94 and ff99 force fields distributed with the AMBER package was verified. The sets provide critical feedback not only on force field transferability, but may also predict modifications for improvement. Such predictions were used to modify the ff99 parameter set, and the resulting force field was used to test stability and folding of model peptides. Structural behavior during molecular dynamics with the modified force field is found to be very similar to expectations, suggesting that these basis sets of conformations may themselves have significant transferability among force fields. We continue to improve and expand this data set and plan to make it publicly accessible. The calculations involved in this process are trivially parallel and can be performed using inexpensive personal computers with commodity components.     

A molecular mechanics force field for lignin

A CHARMM molecular mechanics force field for lignin is derived. Parameterization is based on reproducing quantum mechanical data of model compounds. Partial atomic charges are derived using the RESP electrostatic potential fitting method supplemented by the examination of methoxybenzene:water interactions. Dihedral parameters are optimized by fitting to critical rotational potentials and bonded parameters are obtained by optimizing vibrational frequencies and normal modes. Finally, the force field is validated by performing a molecular dynamics simulation of a crystal of a lignin fragment molecule and comparing simulation-derived structural features with experimental results. Together with the existing force field for polysaccharides, this lignin force field will enable full simulations of lignocellulose.