Carbon Dots with Dual-Emissive,Robust, and Aggregation-Induced Room-Temperature Phosphorescence Characteristics

Carbon dots (CDs) with dual-emissive, robust, and aggregation-induced RTP characteristics are reported for the first time. The TA-CDs are prepared via hydrothermal treatment of trimellitic acid and exhibit unique white prompt and yellow RTP emissions in solid state under UV excitation (365 nm) on and off, respectively. The yellow RTP emission of TA-CDs powder should be resulted from the formation of a new excited triplet state due to their aggregation, and the white prompt emission is due to their blue fluorescence and yellow RTP dual-emissive nature. The RTP emission of TA-CDs powder was highly stable under grinding, which is very rare amongst traditional pure organic RTP materials. To employ the unique characteristics of TA-CDs, advanced anti-counterfeiting and information encryption methodologies (water-stimuli-response producing RTP) were preliminarily investigated.     

Carbon Dots with Dual‐Emissive,Robust, and Aggregation‐Induced Room‐Temperature Phosphorescence Characteristics

Carbon dots (CDs) with dual‐emissive, robust, and aggregation‐induced RTP characteristics are reported for the first time. The TA‐CDs are prepared via hydrothermal treatment of trimellitic acid and exhibit unique white prompt and yellow RTP emissions in solid state under UV excitation (365 nm) on and off, respectively. The yellow RTP emission of TA‐CDs powder should be resulted from the formation of a new excited triplet state due to their aggregation, and the white prompt emission is due to their blue fluorescence and yellow RTP dual‐emissive nature. The RTP emission of TA‐CDs powder was highly stable under grinding, which is very rare amongst traditional pure organic RTP materials. To employ the unique characteristics of TA‐CDs, advanced anti‐counterfeiting and information encryption methodologies (water‐stimuli‐response producing RTP) were preliminarily investigated.     

Red,green and blue aggregation‐induced emissive carbon dots

As one of the most promising fluorescent nanomaterials, carbon dots (CDs) have been extensively studied for their fluorescent properties in solution. However, research on the synthesis of multicolor solid-state fluorescence (SSF) CDs (from blue to red) is rarely reported. Herein, we used o-phenylenediamine, m-phenylenediamine and p-phenylenediamine with dithiosalicylic acid (DTSA) in the solvothermal reaction using acetic acid as a solvent to obtain aggregation-induced emissive (AIE) CDs of red (620 nm), green (520 nm), and blue (478 nm), respectively. XPS spectra and TEM image show that with the red-shift of luminescence, the particle size and content of C=O of the CDs gradually increases. Finally, based on the non-matrix solid-state multicolor luminescence characteristics of CDs, the application of white light LED devices is realized. Besides, based on the fat-soluble properties of CDs, fingerprint detection applications are realized.     

Photoluminescent chiral carbon dots derived from glutamine

The integration of luminescence and chirality in carbon dots (CDs) encourages candidates to explore novel functions and applications of CDs, however, the preparation of chiral CDs is very limited. Herein, we report a hydrothermal method to fabricate chiral CDs by utilizing amino acid enantiomers as the precursors. LGln-CDs or DGln-CDs with uniform size of 3–4 nm show excitation-dependent blue fluorescence in solutions. Circular dichroism measurement confirms the opposite optical rotation of chiral CDs in the region from 200 nm to 300 nm, and the signals can be regulated by concentrations of CDs solution. Time-dependent density functional calculation reveals that polypeptides may exist on the surface of CDs due to the polycondensation of L/DGln at high temperature, and the optical activity of CDs originates from the stacking of neighboring carbonyl groups. The facile synthetic methodology proposed will provide potential opportunities for the preparation and application of chiral and chiroptical CDs-based materials.     

Fluorescence Intensity Enhancement of Green Carbon Dots: Synthesis,Characterization and Cell Imaging

The hydrothermal treatment of green carbon dots (CDs) is an appropriate fluorescent probe synthesis method. CDs are exploited as biological staining agents, especially for cellular detection and imaging. The nitrogen-doped green carbon dots (N-CDs) formation can improve the fluorescence intensity property in a one-step process. Here, we report two N-CDs from lemon and tomato extraction in the presence of hydroxylamine. Lemon and tomato N-CDs showed the blue fluorescence under ultraviolet radiation of about 360 nm. The characterization of CDs and N-CDs showed the presence of N-H and C–N bonds which enhanced the fluorescence efficiency. The mean size of lemon and tomato N-CDs were about 2 and 3 nm with an increased quantum yield (QY) of 5% and 3.38%, respectively. The CDs and N-CDs cytotoxicity assay exhibited high cell viability approximately 85% and 73%, respectively. N-CDs show superior fluorescent intensity in different solvents and significant stability under long-time UV irradiation, different PH and high ionic strength. Our results indicated that the use of N-CDs in cell imaging can lead to fluorescence intensity enhancement as well as proper biocompatibility. Therefore, the safe and high fluorescence intensity of green N-CDs can be utilized for fluorescent probes in biolabeling and bioimaging applications.     

A Universal Strategy for Activating the Multicolor Room‐Temperature Afterglow of Carbon Dots in a Boric Acid Matrix

Carbon dots (CDs) have attracted attention in metal‐free afterglow materials, but most CDs were heteroatom‐containing and the afterglow emissions are still limited to the short‐wavelength region. A universal approach to activate the room‐temperature phosphorescence (RTP) of both heteroatom‐free and heteroatom‐containing CDs was developed by one‐step heat treatment of CDs and boric acid (BA). The introduction of an electron‐withdrawing boron atom in composites can greatly reduce the energy gap between the singlet and triplet state; the formed glassy state can effectively protect the excited triplet states of CDs from nonradiative deactivation. A universal host for embedding CDs to achieve long‐lifetime and multi‐color (blue, green, green‐yellow and orange) RTP via a low cost, quick and facile process was developed. Based on their distinctive RTP performances, the applications of these CD‐based RTP materials in information encryption and decryption are also proposed and demonstrated.     

Pure organic room-temperature phosphorescent N-allylquinolinium salts as anti-counterfeiting materials

Pure organic room-temperature phosphorescence (RTP) materials have been attracting much attention recently. Herein, we report a facile approach combining heavy atom effect and external solvent stimuli to realize RTP. N-Allylquinolinium bromide under 365 nm UV exhibited intense green RTP emission with response upon adding chloroform. This interesting phenomenon endowed N-allylquinolinium bromide great potential as an anticounterfeiting material.     

Facile,Quick, and Gram‐Scale Synthesis of Ultralong‐Lifetime Room‐Temperature‐Phosphorescent Carbon Dots by Microwave Irradiation

Long‐lifetime room‐temperature phosphorescence (RTP) materials are important for many applications, but they are highly challenging materials owing to the spin‐forbidden nature of triplet exciton transitions. Herein, a facile, quick and gram‐scale method for the preparation of ultralong RTP (URTP) carbon dots (CDs) was developed via microwave‐assisted heating of ethanolamine and phosphoric acid aqueous solution. The CDs exhibit the longest RTP lifetime, 1.46 s (more than 10 s to naked eye) for CDs‐based materials to date. The doping of N and P elements is critical for the URTP which is considered to be favored by a n→π* transition facilitating intersystem crossing (ISC) for effectively populating triplet excitons. In addition, possibilities of formation of hydrogen bonds in the interior of the CDs may also play a significant role in producing RTP. Potential applications of the URTP CDs in the fields of anti‐counterfeiting and information protection are proposed and demonstrated.     

Facile,Quick, and Gram‐Scale Synthesis of Ultralong‐Lifetime Room‐Temperature‐Phosphorescent Carbon Dots by Microwave Irradiation

Long‐lifetime room‐temperature phosphorescence (RTP) materials are important for many applications, but they are highly challenging materials owing to the spin‐forbidden nature of triplet exciton transitions. Herein, a facile, quick and gram‐scale method for the preparation of ultralong RTP (URTP) carbon dots (CDs) was developed via microwave‐assisted heating of ethanolamine and phosphoric acid aqueous solution. The CDs exhibit the longest RTP lifetime, 1.46 s (more than 10 s to naked eye) for CDs‐based materials to date. The doping of N and P elements is critical for the URTP which is considered to be favored by a n→π* transition facilitating intersystem crossing (ISC) for effectively populating triplet excitons. In addition, possibilities of formation of hydrogen bonds in the interior of the CDs may also play a significant role in producing RTP. Potential applications of the URTP CDs in the fields of anti‐counterfeiting and information protection are proposed and demonstrated.     

Mass production of highly fluorescent full color carbon dots from the petroleum coke

Heavy oil is treated as an undesirable raw material in traditional refining markets because of its low yield. However, its rich natural aromatic structure and heteroatomic compounds make it possible to be a precursor to large-scale production of carbon materials. Using heavy oil and three SDA products as precursors, we synthesized highly fluorescent multi-color carbon dots (CDs) by hydrothermal method, which can precisely control the photoluminescence wavelength in the range of 350?650 nm. The synthesized carbon dots have the advantages of good long-term stability and stability under extreme pH conditions and low price. Importantly, the carbon dots synthesized with asphalt as the precursor have the highest fluorescence quantum yield. X-ray photoelectron spectroscopy (XPS) is used to elucidate the effects of different precursor on emission color change and photoluminescence quantum yield (PLQY), thus providing a controlled tuning of the system for the functionalization of CDs. And we further used the CDs in macrophage labeling. This pathway gives a reliable and repeatable industry possibility and may boost the applications of CDs into reality.     

Carbon dots prepared for fluorescence and chemiluminescence sensing

Carbon dots(CDs) have attracted considerable research interest in recent years due to their unique optical properties, chemical inertness, facile synthesis from a wide range of starting materials, and advantages over classic quantum dots and organic dyes.Various methods have been developed for preparing the CDs, including chemical oxidation, hydro/solvothermal method,electrochemical method, microwave-assisted synthesis, and direct carbonization method. Importantly, the superior electronic properties of CDs including efficient light harvesting and prominent photoinduced electron transfer have aroused considerable attention in fluorescence(FL) and chemiluminescence(CL) sensing field. In this review, we aim to demonstrate the recent progress of CDs in the synthesis, FL and CL sensing applications. This review gives new insights into how to use different synthetic methods to tune the structure of the CDs, with the major focus on FL and CL sensing.     

Matrix‐Free and Highly Efficient Room‐Temperature Phosphorescence Carbon Dots towards Information Encryption and Decryption

Designing efficient room‐temperature phosphorescence (RTP) carbon dots (C‐dots) without the need of an additional matrix is important for various applications. Herein, matrix‐free and highly efficient C‐dots with yellow‐green RTP emission have been successfully synthesized towards information encryption and decryption. Phytic acid (PA) and triethylenetetramine are used as molecular precursors, and a facile microwave‐assisted heating method is selected as synthesis method. The obtained C‐dots exhibit a maximum phosphorescence emission at around 535 nm under an excitation wavelength of 365 nm and a long average lifetime up to 750 ms (more than 9 s to the naked eye). PA containing six phosphate groups and serving as P source plays a significant role in producing the RTP C‐dots. Furthermore, potential applications of the RTP C‐dots in the field of information encryption and decryption are successfully demonstrated.     

碳点的性质及其在生物传感器领域的应用

碳点(carbon dots,CDs)作为一种具有优良生物相容性、低毒性和表面功能可调的新型碳基纳米材料,在生物传感领域具有极大的应用潜力.本文对碳点的生物效应、发光性质及其发光机理进行了简述,并根据传感机制的不同,将CDs在生物传感领域的应用分为荧光(fluorescence,FL)传感器、电致发光(electrochemiluminescence,ECL)传感器以及化学发光(chemiluminescence,CL)传感器三类进行综述.最后分析了CDs目前在生物传感器领域应用中存在的问题,并对其发展进行了展望.     

Carbon Dots in a Matrix: Energy‐Transfer‐Enhanced Room‐Temperature Red Phosphorescence

High‐efficiency red room‐temperature phosphorescence (RTP) emissions have been achieved by embedding carbon dots (CDs) in crystalline Mn‐containing open‐framework matrices. The rationale of this strategy relies on two factors: 1) the carbon source, which affects the triplet energy levels of the resulting CDs and thus the spectral overlap and 2) the coordination geometry of the Mn atoms in the crystalline frameworks, which determines the crystal‐field splitting and thus the emission spectra. Embedding the carbon dots into a matrix with 6‐coordinate Mn centers resulted in a strong red RTP with a phosphorescence efficiency of up to 9.6 %, which is higher than that of most reported red RTP materials. The composite material has an ultrahigh optical stability in the presence of strong oxidants, various organic solvents, and strong ultraviolet radiation. A green‐yellow RTP composite was also prepared by using a matrix with 4‐coordinate Mn centers and different carbon precursors.     

Spatial effect and resonance energy transfer for the construction of carbon dots composites with long-lived multicolor afterglow for advanced anticounterfeiting

Carbon dots (CDs) with room-temperature phosphorescence (RTP) have attracted dramatically growing interest in optical functional materials. However, the photoluminescence mechanism of CDs is still a vital and challenging topic. In this work, we prepared CD-based RTP materials via melting boric acid with various lengths of alkyl amine compounds as precursors. The spatial effect on the structure and the RTP properties of CDs were systematically investigated. With the increase in carbon chain length, the interplanar spacing of the carbon core expands and crosslink-enhanced emission weakens, resulting in a decrease in the phosphorescence intensity and lifetimes. Meanwhile, based on triplet-to-singlet resonance energy transfer, we employed intense and long-lived phosphorescence CDs as the donor and short-lived fluorescent dyes as the acceptor to achieve long-lived multicolor afterglow. By the triplet-to-singlet resonance energy transfer, the afterglow color can change from green to orange. The afterglow lifetimes are more than 0.9 s. Thanks to the outstanding afterglow properties, the composites were used for time-resolved and multiple-color advanced anticounterfeiting. This work will promote the design of multicolor and long-lived afterglow materials and expand their applications.     

Fluorine-defects induced solid-state red emission of carbon dots with an excellent thermosensitivity

Up to date, solid-state carbon dots (CDs) with bright red fluorescence have scarcely achieved due to aggregation-caused quenching (ACQ) effect and extremely low quantum yield in deep-red to near infrared region. Here, we report a novel fluorine-defects induced solid-state red fluorescence (λ_em = 676 nm, the absolute fluorescence quantum yields is 4.17%) in fluorine, nitrogen and sulfur co-doped CDs (F,N,S-CDs), which is the first report of such a long wavelength emission of solid-state CDs. As a control, CDs without fluorine-doping (N,S-CDs) show no fluorescence in solid-state, and the fluorescence quantum yield/emission wavelength of N,S-CDs in solution-state are also lower/shorter than that of F,N,S-CDs, which is mainly due to the F-induced defect traps on the surface/edge of F,N,S-CDs. Moreover, the solid-state F,N,S-CDs exhibit an interesting temperature-sensitive behavior in the range of 80–420 K, with the maximum fluorescence intensity at 120 K, unveiling its potential as the temperature-dependent fluorescent sensor and the solid-state light-emitting device adapted to multiple temperatures.     

Photoactivated Fluorescence Enhancement in F,N-Doped Carbon Dots with Piezochromic Behavior

Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co-doped carbon dots (F,N-doped CDs) is presented. At 1.0 atm, the fluorescence intensity of F,N-doped CDs increases with UV light irradiation (5 s–30 min), accompanied with a blue-shift of the fluorescence emission from 586 nm to 550 nm. F,N-doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1 GPa). F,N-doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0 atm to 9.98 GPa), showing a pressure-triggered aggregation-induced emission in the range 1.0 atm–0.65 GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high-pressure conditions and enhances their anti-photobleaching.     

Visible-light-excited long-lived organic room-temperature phosphorescence of phenanthroline derivatives in PVA matrix by H-bonding interaction for security applications

Organic room-temperature phosphorescence (RTP) materials are very attractive, but there is still a challenge to achieve RTP for their practical applications under visible light excitation (λ > 400 nm) because of the implement for the most organic RTP is under ultraviolet light. Herein, a simple tactics for inhibiting the vibrational dissipation of three amorphous phenanthroline derivatives by doping them into polyvinyl alcohol (PVA) matrix was utilized to afford visible-light excitation RTP. By using this method, on account of the mutual H-bonding and confinement effect with PVA matrix, a series of organic RTP materials with blue-green phosphorescence emission were obtained under visible-light excitation. The afterglow colors of RTP materials can be adjusted by co-doping the available fluorescence dyes (RhB or Rh6G) into the PVA films through a triplet-to-singlet Förster resonance energy transfer. However, the H-bonding is easily broken by water molecules resulting in the RTP phenomenon disappears. Hence, Aphen-epoxy resin composite system was constructed to overcome this drawback. It is shown that the composite still has good phosphorescence properties after soaking in water for 7 days. The superior RTP of the amorphous phenanthroline derivatives in processable polymer matrices endows these materials with a highly potential for the night warning clothing coating and information encryption.     

Yellow emissive carbon dots in ludox silica matrix with anticancer activity for enhanced imaging of developed sweat latent fingermarks

The recognition of fingermarks plays a vital role during a criminal investigation. In the current scenario, fluorescent nano-powders emerged as a potential candidate for latent fingermark detection. We pioneer the use of microwave technology for the synthesis of carbon dots (CDs) with the cationic surfactant (cetylpyridinium chloride). The surfactant-derived CDs exhibit yellow fluorescence and emission at 545 nm with high quantum yield of (QY～34%). The prepared CDs also demonstrated amphiphilic properties. These luminous CDs were combined with ludox HS-30 to develop fluorescent hybrid nano-powders for the detection of sweat latent fingermarks on a non-porous surface. The ludox@CDs accumulate particle size 11.36 ± 1.235 nm and surface area 111 cm³/g^?1. The fluorescent hybrid nano-powders emerged to be successful in creating high contrast and accurate latent fingermark images. Furthermore, cytotoxicity studies on breast cell lines (fR-2 and MCF-7) were conducted by using ludox@CDs. The results revealed that ludox@CDs were less toxic and biocompatible in comparison to the commercialized dusting reagents. Fortunately, ludox@CDs demonstrated anticancer efficacy against MCF-7 breast cancer cell lines. Thus, our findings herald a new age for fluorescent hybrid nano-powders in criminal investigation and biomedical applications.     

Photoactivated Fluorescence Enhancement in F,N‐Doped Carbon Dots with Piezochromic Behavior

Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co‐doped carbon dots (F,N‐doped CDs) is presented. At 1.0 atm, the fluorescence intensity of F,N‐doped CDs increases with UV light irradiation (5 s–30 min), accompanied with a blue‐shift of the fluorescence emission from 586 nm to 550 nm. F,N‐doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1 GPa). F,N‐doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0 atm to 9.98 GPa), showing a pressure‐triggered aggregation‐induced emission in the range 1.0 atm–0.65 GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high‐pressure conditions and enhances their anti‐photobleaching.