亲水纳米二氧化硅修饰丝网印刷碳糊电极的改进性能研究

研究了以铁氰化钾为电子传递剂,亲水纳米二氧化硅为固定化酶的载体与高分子成膜材料掺杂制作的生物敏感膜修饰丝网印刷碳糊电极葡萄糖生物传感器的改进特性,并从机理上分析了形成这种优化的原因。实验采用柠檬酸作为缓冲液,在高分子成膜材料、铁氰化钾、稳定剂、葡萄糖氧化酶中掺杂均相处理后的纳米二氧化硅制备生物敏感膜,并制成腔体,将其与未经过纳米二氧化硅掺杂制备的生物传感器进行对比实验。实验证明:用掺杂纳米二氧化硅制作的生物敏感膜修饰的丝网印刷碳糊电极与未修饰电极相比,灵敏度提高了2.6倍,线性检测范围为1.1~33.3 mmol/L,对测试范围内不同浓度的葡萄糖样本,相对标准偏差<5%,重现性和稳定性良好,具有较高的研究价值和应用前景。     

亲水金和憎水二氧化硅纳米颗粒对葡萄糖生物传感器响应灵敏度的增强作用

用亲水金、憎水二氧化硅纳米颗粒固定葡萄糖氧化酶(GOD),采用聚乙烯醇缩丁醛(PVB)为辅助固酶膜基质来制备葡萄糖生物传感器,并考察了亲水金、憎水二氧化硅纳米颗粒对酶电极电流响应的影响.实验表明,引入纳米粒子可显著增强电极响应灵敏度.并对两种不同性质纳米颗粒所起作用的可能机理进行讨论,从理论和实验上证明了纳米颗粒对固定酶的作用.为制备有实用价值的葡萄糖生物传感器提供了可供参考的实验和理论依据.     

基于层-层自反应的葡萄糖氧化酶有序多层膜电极

以胱胺修饰的金电极为基础电极, 利用席夫碱反应使经高碘酸根氧化的葡萄糖氧化酶在该电极表面进行自身的层-层有序组装. 用电化学交流阻抗法对多层酶膜形成过程的跟踪结果表明, 该多层酶膜的生长是一个逐步形成的均匀过程. 用循环伏安法和I-t曲线法研究了该酶电极对葡萄糖的电催化氧化. 实验结果表明, 当采用羟基二茂铁作为人工电子转移媒介体时, 该酶电极对葡萄糖具有很好的电催化氧化功能. 该传感器制作简便, 响应迅速, 性能稳定, 催化电流与葡萄糖浓度在一定范围内成正比, 并且可以通过控制葡萄糖氧化酶的组装层数来调节该生物传感器的灵敏度与检测限.     

Nafion-氧化石墨烯复合物和硫堇构建葡萄糖生物传感器的研究

本文利用Nafion-氧化石墨烯复合物和硫堇构建了葡萄糖生物传感器。首先将氧化石墨烯分散在0.2%Nafion溶液中制得Nafion-氧化石墨烯的复合物,并将其固定在玻碳电极表面,通过静电吸附将带正电荷的硫堇吸附到Nafion-氧化石墨烯复合膜修饰的玻碳电极表面,然后利用硫堇的氨基和醛基化葡萄糖氧化酶的醛基共价键合作用将葡萄糖氧化酶固定到电极表面。实验表明该传感器响应快、灵敏度高、稳定性好。传感器的灵敏度为7.68μAcm-2(mmol·L-1)-1。     

亲水金和憎水二氧化硅纳米颗粒对葡萄糖生物传感器响应灵 …

用亲水金、憎水二氧化硅纳米颗粒固定葡萄糖氧化酶（ＧＯＤ）,采有聚乙烯醇缩丁醛（ＰＶＢ）为辅助固酶膜基质来制备葡萄糖生物传感器,并考察了亲水金、憎水二氧化硅纳米颗粒对酶电极电流响应的影响。实验表明,引入纳米粒子可显著增强电极响应灵敏度,并对两种不同性质纳米所起作用的可能机理进行讨论,从理论和实验上辛 明了纳米颗粒对固定酶的作用。为制备有实用价值的葡萄糖生物传感器提供了可供参考的实验和理论依据。     

基于纳米MnO_2二茂铁修饰丝网印刷碳电极的尿酸生物传感器研究

在丝网印刷碳电极上修饰纳米MnO2,并利用戊二醛和β-环糊精交联固定尿酸酶,以二茂铁作为电子媒介体,研制用于测定尿酸浓度的生物传感器.实验结果表明,纳米MnO2降低了电子媒介体二茂铁的氧化还原反应电位,且纳米MnO2与电子媒介体二茂铁在尿酸生物传感器中表现出协同增效效应.该尿酸生物传感器线性响应范围是6.0×10-6～1.2×10-3 mol/L,检出限为3.0×10-6 mol/L.用纳米MnO2修饰酶电极,改善了电极表面条件,加快了电极反应速率,提高了尿酸传感器的灵敏度.     

掺杂纳米普鲁士蓝溶胶-凝胶修饰葡萄糖生物传感器

采用溶胶-凝胶法制备了纳米普鲁士蓝微粒,将含纳米普鲁士蓝微粒的TiO2溶胶-凝胶固定在玻碳电极表面得到纳米普鲁士蓝修饰电极,该电极对H2O2产生灵敏的响应,线性范围为0．5～400μmoL／L,较常规普鲁士蓝修饰电极(线性范围为25～500μmol／L)灵敏。电极表面再用溶胶．凝胶法固定葡萄糖氧化酶后构建了葡萄糖生物传感器,响应范围0～20mmoL／L,葡萄糖氧化酶表观米氏常数为8．04mmoL／L。实验表明,该法适合于批量制作高灵敏和高重现性的生物传感器。     

基于石墨/聚吡咯电极的葡萄糖生物传感器

采用电化学聚合技术,在掺杂的导电聚吡咯薄膜修饰过的铅笔芯电极上,吸附葡萄糖氧化酶制备葡萄糖生物传感器。首先在含有0.1 mol/L吡咯和0.01 mol/L HCl的溶液中,于0.7 V恒电位下吡咯单体氧化聚合,在铅笔芯电极表面形成聚吡咯薄膜;然后将葡萄糖氧化酶吸附在修饰过的电极上制备出葡萄糖氧化酶-聚吡咯-铅笔芯电极电流型生物传感器。实验考察了吡咯聚合时间、聚合温度、葡萄糖氧化酶吸附量、检测电压以及干扰物对传感器性能的影响。实验结果表明,在优化条件下,传感器的灵敏度为17.78μA/mmol/L,线性范围0.8 mmol/L,线性相关度R=0.9918,响应时间小于16 s,检测下限为18.75μmol/L,有较强的抗干扰能力。     

基于单壁碳纳米管-DNA酶复合结构的电化学生物传感器

结合DNA酶优异的氧化还原催化特性和碳纳米管的电化学特性, 制备了单壁碳纳米管-DNA酶复合材料, 并通过壳聚糖将其固定到玻碳电极表面构建了电化学生物传感界面. 研究了单壁碳纳米管-DNA酶复合结构的氧化还原反应催化特性, 并以此为传感平台构建了葡萄糖氧化酶电化学生物传感器. 结果表明, 单壁碳纳米管-DNA酶复合材料修饰的电极对过氧化氢的响应具有较宽的线性范围(5×10^-6~1×10^-2 mol/L)和良好的检测灵敏度(检出限为1×10^-6 mol/L). 采用制备的葡萄糖氧化酶传感器实现了对葡萄糖的快速灵敏检测.     

聚吡咯修饰乳酸氧化酶电极的研制

根据聚吡咯修饰电极掺杂和去掺杂原理，将乳酸氧化酶固定在玻碳电极表面形成一种新型的乳酸酶电极，该电极灵敏度高，稳定性好，易于制作。本文报道了该电极的研制过程，探讨了影响电极响应的各种因素，找出了最佳实验条件。将此电极用于实际样品中乳酸含量的测定，结果令人满意。     

Amperometric Glucose Biosensors Based on Glassy Carbon and SWCNT‐Modified Glassy Carbon Electrodes

Different carbonaceous materials, such as single‐walled carbon nanotubes (SWCNTs) and glassy carbon submitted to an electrochemical activation at +1.80 V (vs. SCE) for 900 s, have been used with the aim of comparing their performances in the development of enzyme electrodes. Commercial SWCNTs have been pretreated with 2.2 M HNO₃ for 20 h prior to use. The utility of activated GC as promising material for amperometric oxidase‐based biosensors has been confirmed. With glucose oxidase (GOx) as a model enzyme, glucose was efficiently detected up to 1 mM without the use of a mediator. Both electrodes operated in stirred solutions of 0.1 M phosphate buffer (pH 5.5), containing dissolved oxygen, at a potential of ?0.40 V vs. SCE. Although the performances of the two carbonaceous materials were comparable, the biosensors based on activated GC were characterized by a practically unchanged response 40 days after the fabrication, a better signal to noise ratio, and a little worse sensitivity. In addition, the preparation procedure of such biosensors was more simple, rapid and reproducible.     

Response Behavior of Amperometric Glucose Biosensors Based on Different Carbon Substrate Transducers Coated with Enzyme‐Active Layer: A Comparative Study

Carbon electrodes (glassy carbon, GC, screen‐printed carbon, SPC, and carbon fiber, CF) were used as substrate transducers to prepare glucose biosensors of different sizes and geometries, based on iron‐ruthenium hexacyanoferrate as H₂O₂ reduction mediator and glucose oxidase immobilized in a poly(1,2‐phenylenediamine) membrane. Their response behavior under hydrodynamic amperometric conditions at an operating potential of ?0.02 V vs. Ag/AgCl was studied and compared. While the GC and SPC based conventional size biosensors showed enzymatic catalysis controlled current response with nonlinear concentration dependence, the CF based micro‐biosensor exhibited, due to diffusion‐controlled current response, extended linear range calibration curves with relatively lower sensitivity and longer response times. Several preparation parameters responsible for the improvement of biosensor performance were also investigated.     

Carbon nanotubes/pentacyaneferrate-modified chitosan nanocomposites platforms for reagentless glucose biosensing

The design, characterization and applicability of a nanostructured biosensor platform are described. The biosensor is developed through the immobilization of three components: a polymeric chitosan network previously modified with a redox mediator (denoted as PCF-Pyr-Ch), an enzyme (glucose oxidase, chosen as a model) and carbon nanotubes onto a solid glassy carbon electrode (C). In order to assess the influence of the nanomaterial in the performance of the resulting analytical device, a second biosensor, free of carbon nanotubes, is developed. The characterization of both biosensing platforms was performed in aqueous phosphate buffer solutions using atomic force microscopy technique. In the presence of glucose, both systems exhibit a clear electrocatalytic activity, and glucose could be amperometrically determined at +0.35 V versus Ag/AgCl. The performance of both biosensors was evaluated in terms of sensitivity, detection limit and linear response range. Finally, the enhancement of the analytical response induced by the presence of carbon nanotubes was evaluated.     

A novel procedure for rapid surface functionalisation and mediator loading of screen-printed carbon electrodes

We report a simple and rapid procedure that leads to incorporation of mediator and introduction of amine functionality onto the surface of screen-printed carbon electrodes (SPCE). The electrodes were doped with cobalt phthalocyanine (CoPc) by enhanced adsorption in a process that uses minimal amounts of this redox mediator as compared with CoPc loaded inks. The CoPc-doped SPCE showed a substantially increased sensitivity to hydrogen peroxide and thiocholine as compared to unmodified electrodes. This greatly facilitated their use as transducers for the construction of amperometric biosensors based on enzymes producing oxidizable products such as hydrogen peroxide or thiols. Immobilisation of enzymes including glucose oxidase, acetylcholinesterase and choline oxidase was achieved through their multi-contact electrostatic interaction with polyethyleneimine (PEI) which was electrodeposited on the surface of CoPc-doped electrodes in one step from ethanolic solution. The efficiency of enzyme immobilisation was shown to depend on the molecular weight of the PEI used, reaching a maximum for 25 kDa PEI. The biosensors shown sensitivity to glucose at 130 nA mM⁻¹ (LOD 0.15 mM) and to acetylcholine at 70 nA mM⁻¹ (LOD 0.10 mM) under +0.6 V. Detection of glucose has been demonstrated at +0.4 V with the sensitivity of 60 nA mM⁻¹ and LOD of 0.33 mM. Possibility of the inhibition analysis of pesticides has been shown for acetylcholinesterase-based sensors.     

Electroanalytical Study of Prussian Blue Modified Glassy Carbon Paste Electrodes

Two types of glassy carbon (GC) powder (i.e., Sigradur K and Sigradur G) have been mixed with mineral oil to obtain glassy carbon paste electrodes (GCPE's). The electrochemical behavior of such electrodes at different percentages of glassy carbon has been evaluated with respect to the electrochemistry of ferricyanide as revealed with cyclic voltammetry and the best paste composition was chosen. GC was then modified with Prussian Blue (PB), mixed at different percentages with unmodified GC and with a fixed amount of mineral oil in order to obtain PB modified glassy carbon paste electrodes (PB‐GCPE's). PB‐GCPE's with different percentages of GC modified with PB (PB‐GC) were compared and the dependence on the amount of PB on their performances was evaluated by studying the parameters of cyclic voltammetry (i.e., current peak, ΔE_p, anodic and cathodic current ratio, charge density) and the amperometric response to H₂O₂. Data interpretation based on the GC surface area is presented. GCPE's with a selected amount of PB‐GC were then tested as H₂O₂ probes and all the analytical parameters together with the dependence on pH were evaluated. Some preliminary experiments with these electrodes assembled as glucose, lysine and lactate biosensors are also reported.     

Development of electrochemical biosensors based on sol-gel enzyme encapsulation and protective polymer membranes

Protective polymer coatings have been used to enhance the retention of enzymes in sol-gel films as immobilisation phases in electrochemical biosensors. Carbon film electrodes were electrochemically modified with poly(neutral red) (PNR). These electrodes were coated with oxysilane sol-gels incorporating glucose oxidase and an outer coating of carboxylated PVC (CPVC) or polyurethane (PU), with and without Aliquat-336 or isopropyl myristate (IPM) plasticizer, was applied. The biosensors were characterised electrochemically using cyclic voltammetry and amperometry, electrochemical impedance spectroscopy and scanning electron microscopy. Impedance spectra showed that the electrode surface is most active when the sol-gel–GOx layer is not covered with a membrane. However, membranes without plasticizer extend the lifetime of the biosensor to more than 2 months when PU is used as an outer membrane. The linear range of the biosensors was found to be 0.05–0.50 mM of glucose and the biosensor with PU outer membrane exhibited higher sensitivity (ca.117 nA mM⁻¹) in the region of linear response than that with CPVC. The biosensors were applied to glucose measurement in natural samples of commercial orange juice.     

电化学葡萄糖传感器

作为电化学生物传感器中最重要的研究内容之一,葡萄糖生物传感器在数十年的发展中取得了巨大进展。本文综述了近年来利用纳米技术设计的新型电化学葡萄糖传感器的主要研究进展,并从纳米材料维度分类进行了讨论。其中,零维纳米材料主要讨论了包括金纳米颗粒、银纳米颗粒以及铜、铂等金属纳米颗粒材料; 一维纳米材料主要讨论了通过模板法制备的金属或金属氧化物纳米线以及单臂或者多壁纳米管材料; 二维纳米材料主要总结了以碳为基础的石墨烯材料和一些片状的金属材料。纳米材料对电化学葡萄糖传感器的影响主要集中在生物相容性、增强检测灵敏度、酶的固定等方面。此外,本文也对电化学葡萄糖传感器的今后发展做了展望。     

Electrochemical Glucose Biosensors: Whole Cell Microbial and Enzymatic Determination Based on 10-(4H-Dithieno[3,2-b:2′,3′-d]Pyrrol-4-yl)Decan-1-Amine Interfaced Glassy Carbon Electrodes

The fabrication of amperometric biosensors based on whole cell Gluconobacter oxydans DSMZ 2343 (G. oxydans) and glucose oxidase (GOx) was performed for the detection of glucose. Glassy carbon electrodes (GCE) were coated with a 10-(4H-dithiyeno [3,2-b:2’,3’-d]pyroll-4-il)decan-1-amine (DTP-alkyl-NH₂) polymer using an electropolymerization method and the formed interface was used to connect the bacteria and the enzyme to the electrode. The transfer of electrons from enzyme to electrode was successfully demonstrated by the biocatalytic activity and unique morphology of the conducting polymer. Characterization of the biosensors was assessed using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) analyses. The detection limits of the enzyme and microbial based biosensors for glucose were 0.022 and 0.081?mM, respectively. The broad linear dynamic ranges of the GOx and G. oxydans biosensors were observed to be 0.045–50.0 and 0.19–50.0?mM, respectively. The analytical performances of biosensors were compared according to the following figures of merit: detection limits, limits of quantification, pH and current response time. In addition, to demonstrate the applicability of the biosensors, real-time measurements and recovery studies were evaluated.     

Application of Some Room Temperature Ionic Liquids in the Development of Biosensors at Carbon Film Electrodes

Two room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium bistriflimide and 1‐butyl‐3‐methylimidazolium nitrate, were employed for enzyme immobilization in a new sol‐gel matrix and, for the first time, were successfully applied as electrolyte carriers in a biosensing system. The new sol‐gel matrix, based on 3‐aminopropyltrimethoxysilane and 1‐butyl‐3‐methylimidazolium bistriflimide mixtures, did not crack even after several weeks when kept dry, and exhibited similar analytical properties to aqueous sol‐gel based glucose biosensors. The linear range was up to 1.1 mM of glucose, sensitivity was 62 nA mM^?1 and the limit of detection was 28.8 μM. The optimum ionic liquid electrolyte carrier was found to be 1‐butyl‐3‐methylimidazolium nitrate, where the biosensor was made by electrodeposition of the redox mediator, poly(neutral red), and the enzyme was immobilized by cross‐linking with glutaraldehyde. The results showed that application of room temperature ionic liquids to biosensors is very promising and can be further exploited.