Magnetic polymer microsphere stabilized gold nanocolloids as a facilely recoverable catalyst

Magnetically responsive hierarchical magnetite/silica/poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine) (Fe₃O₄/SiO₂/P(EGDMA-co-VPy)) tri-layer microspheres were used as stabilizers for gold metallic nanocolloids as a facilely recoverable catalyst with the reduction of 4-nitrophenol to 4-aminophenol as a model reaction. The magnetic microsphere stabilized gold metallic nanocolloids were prepared by in situ reduction of gold chloride trihydrate with borohydride as reductant via the stabilization effect of the pyridyl groups to gold nanoparticles on the surface of the outer shell-layer of the inorganic/polymer tri-layer microspheres.     

Raspberry-like polymer/silica core-corona composite by self-assemble heterocoagulation based on a hydrogen-bonding interaction

Raspberry-like poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine)/silica (poly(EGDMA-co-VPy)/SiO₂) core-corona composite was prepared by a self-assemble heterocoagulation based on a hydrogen-bonding interaction between the pyridyl group of poly(EGDMA-co-VPy) core and the active hydroxyl group of silica corona. The raspberry-like composite was stable near the neutral environment with pH ranging from 5.0 to 8.0. The effects of the solvent and the mass ratio of silica to polymer microsphere on the coverage of the silica corona on poly(EGDMA-co-VPy) core were investigated in detail. The resultant core-corona heterocoagulates were characterized with scanning electron microscope and the nature of the interaction between the polymer core particle and silica corona particle was identified as hydrogen bonding with Fourier Transform Infrared spectroscopy.     

Rattle-type microspheres as a support of tiny gold nanoparticles for highly efficient catalysis

SiO(2)/poly(ethyleneglycol dimethacrylate) (PEGDMA) rattle-type microspheres loaded with tiny sized gold nanoparticles (~2 nm) were prepared through a facile and novel method. Catalyzed reduction of 4-nitrophenol with NaBH(4) demonstrated that this rattle-type microsphere possessed high catalytic efficiency.     

Catalytic properties of carboxylic acid functionalized-polymer microsphere-stabilized gold metallic colloids

Polymer-microsphere-stabilized gold metallic colloids have been prepared by a novel strategy of simple and convenient reduction of the metallic salt through the stabilization of the active carboxylic acid group on the gel and surface layer of the microsphere. The nature of the interaction between the carboxylic acid and Au nanoparticles was studied in detail by XPS. Preliminary results indicate that polymer-microsphere-stabilized gold colloids are active catalysts for the reduction of 4-nitrophenol to 4-aminophenol with sodium borohydride as reductant. The catalytic properties of the stabilized catalyst for recycling were also investigated.     

Oxidation of Hydroquinone By (N-Vinylpyrrolidone)-(4-Vinylpyridine) Block and Graft Copolymers

ABSTRACT

A-B Type block copolymer of N-vinylpyrrolidone (NVP) and 4-vinylpyridine (VPy) [poly(NVP-b-VPy) and graft copolymers of VPy onto copolymers of NVP with 4-vinylbenzyl N,N-diethyldithiocarbamate (VBDC) [poly(NVP-g-VPy) were synthesized by the iniferter method. the compatibility between NVP and VPy units in the copolymers was evaluated from the glass transition temperature of these copolymers. Hydroquinone was then oxidized by the synthesized NVP-VPy copolymers-Cu(II) complex catalysts. the influence of the distribution of each monomer unit in copolymers on the catalytic activity was studied by comparing the activity of these copolymers. the catalytic activity of these copolymers increased in the order: NVP-VPy blend polymer, poly(NVP-b-VPy), poly(NVP-g-VPy), random copolymer [poly(NVP-ran-VPy)]. This order parallels the compatibility between NVP units and VPy units in these copolymers.     

Chiral recognition and separation of beta2-amino acids using non-covalently molecularly imprinted polymers

Non-covalently molecularly imprinted polymers (MIPs) for beta2-amino acids were prepared for the first time. N-(2-chlorobenzyloxycarbonyl)-(R)-beta2-homophenylalanine (N-2-ClZ-(R)-beta2-HPhe) was imprinted with methacrylic acid (MAA) and/or 4-vinylpyridine (4-VPy) as the functional monomers, with ethylene glycol dimethacrylate (EDMA) as the cross-linker. The MIPs made with different ratios of MAA:4-VPy were studied in HPLC mode. The results show that MIPs made with 4-VPy yielded the best chiral separation factor (alpha= 1.86) for the template molecule. The importance for an efficient separation of pi-stacking interactions between the MIPs and the template molecule is demonstrated. Racemates of Z-alpha-amino acids and beta-amino acid analogues of the template were either not or poorly resolved by the MIPs, thus demonstrating the close three-dimensional complementarity of the MIPs' recognition sites with the template.     

SYNTHESIS OF POLY(DIVINYLBENZENE-co-ACRYLIC ACID) HOLLOW MICROSPHERES WITH GOLD NANOPARTICLES ON THE INTERIOR SURFACE

Poly(divinylbenzene-co-acrylic acid) (poly(DVB-co-AA)) hollow microspheres with gold nanoparticles on the interior surfaces were prepared from the gold nanoparticles-coated poly(methacrylic acid) (PMAA@Au@poly(DVB-co-AA)) core-shell microspheres by removal of the PMAA core in water.Au nanoparticles-coated PMAA microspheres were afforded by the in-situ reduction of gold trichloride with PMAA microsphere as stabilizer via the interaction between carboxylic acid groups and Au nanoparticles.Gold nanoparticle...     

分子印迹聚合物固相萃取红椒粉中的苏丹红Ⅰ

本文以苏丹红Ⅰ为模板分子,以甲基丙烯酸(MAA)、4-乙烯基吡啶(4-VPy)为功能单体,制备了两种模板聚合物(MAA-MIP和4-VPy-MIP)。对4-VPy-MIP进行了Scatchard方程分析。分别以这两种模板聚合物为固相萃取材料来填充固相萃取柱,从掺有苏丹红Ⅰ的红椒粉中萃取苏丹红Ⅰ。本文优化了固相萃取条件。高效液相色谱检测表明,在合适的萃取条件下,采用填充4-VPy-MIP的固相萃取柱可以有效地从红椒粉中分离富集苏丹红Ⅰ。     

Preparation of magnetic microspheres with thiol-containing polymer brushes and immobilization of gold nanoparticles in the brush layer

Narrow-disperse magnetic microspheres were prepared by alkaline coprecipitation of Fe²⁺ and Fe³⁺ ions within poly(acrylic acid–divinylbenzene) microspheres that were prepared by distillation–precipitation copolymerization. Magnetic microspheres with polymer brushes that contain epoxy groups were prepared by graft copolymerization of glycidyl methacrylate and glycerol monomethacrylate via atom transfer radical polymerization (ATRP) from the magnetic microsphere surfaces. Subsequently, magnetic microspheres with thiol-containing polymer brushes were prepared by treating the epoxy group-containing magnetic microspheres with sodium hydrosulfide. Gold nanoparticles were immobilized in the brush layer of the thiol-containing magnetic microspheres through Au–S coordination. The catalytic activity of the gold nanoparticle-immobilized magnetic microspheres was investigated using the reduction of 4-nitrophenol to 4-aminophenol with sodium borohydride as a model reaction. The catalyst could be reused for over 10 cycles without noticeable loss of catalytic activity.     

Synthesis of gold nanoparticles stabilized with poly(N-isopropylacrylamide)-co-poly(4-vinyl pyridine) colloid and their application in responsive catalysis

The copolymer of poly(N-isopropylacrylamide)-co-poly(4-vinylpyridine) was synthesized by free radical copolymerization of 4-vinylpyridine and N-isopropylacrylamide. The copolymer synthesized with the feed monomer ratio of 4-vinylpyridine/N-isopropylacrylamide equal to 1/3 was associated to form thermoresponsive colloid in neutral water at room temperature, the average size and the cloud-point temperature of which were 40 nm and 32 °C, respectively. The thermoresponsive colloid was used as scaffold to load 2-nm Au nanoparticles to form the responsive catalyst of colloid-stabilizing gold nanoparticles. The catalysis in the model reduction of 4-nitrophenol with NaBH₄ suggested that the catalytic reduction could be modulated due to the thermoresponsive phase-transition of the colloid-stabilizing gold nanoparticles. That was, the catalytic reduction firstly accelerated with the increase in temperature below the cloud-point temperature and then decelerated with the increase in temperature above the cloud-point temperature of the thermoresponsive colloid-stabilizing Au nanoparticles.     

Synthesis of titania/polymer core-shell hybrid microspheres

Monodisperse titania/polymer core-shell microspheres were prepared by a two-stage reaction with titania as core and poly(ethyleneglycol dimethacrylate) (PEGDMA) as shell, in which the titania cores were synthesized by a sol-gel method and subsequently grafted with 3-trimethoxysilyl methacrylate as the first-stage reaction to incorporate the vinyl groups on the surface of inorganic core. The PEGDMA shell was then encapsulated over the MPS-modified titania core by distillation precipitation polymerization of ethyleneglycol dimethacrylate in neat acetonitrile during the second-stage polymerization via capture of the radicals of EGDMA with the aid of the reactive vinyl groups on the surface of inorganic core without any stabilizer or surfactant. The shell thickness of the core-shell hybrid microspheres was controlled by the feed of EGDMA monomer during the polymerization. The resultant titania particles and core-shell microspheres were studied by transmission electron microscopy, Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, and thermogravimetric analysis.     

Supramolecular side chain liquid crystal polymers II. Interaction of mesogenic acids and amorphous polymers

The thermal behaviour of blends of a low molar mass mesogenic acid, 6-(4-n-butyloxy-4'-oxybiphenyl)hexanoic acid (BOBPOHA) with polystyrene, poly(2-vinylpyridine) and poly(4-vinylpyridine) has been characterized. BOBPOHA exhibits a monotropic smectic A phase and is essentially immiscible with polystyrene. Thus, the transition temperatures of the acid are independent of blend composition. In contrast, the thermal properties of the acid are strongly modified on blending with poly(2-vinylpyridine) and poly(4-vinylpyridine). Molecular mixing occurs in these blends below approximately 0.2 mol fraction of acid. This miscibility is driven by the formation of hydrogen bonds between the pyridyl and acid moieties. At higher concentrations of acid, phase separation occurs. Liquid crystallinity is not observed in the miscible blends while in the immiscible blends mesomorphic behaviour is attributed to regions of phase separated acid.     

Core-corona polymer composite particles by self-assembled heterocoagulation based on a hydrogen-bonding interaction

Poly(ethylene glycol dimethacrylate-co-acrylic acid) (poly(EGDMA-co-AA)) small microspheres were effectively self-assembled on poly(ethylene glycol dimethacrylate-co-4-vinylpyridine) (poly(EGDMA-co-VPy)) surfaces to form a core-corona structure with a raspberry-like polymer composite by a hydrogen interaction mechanism through an affinity complex between the carboxylic acid group and pyridine group. The control of coverage of the poly(EGDMA-co-AA) corona on the surface of poly(EGDMA-co-VPy) was studied in detail via adjustment of the nature of the mass ratio between the core and corona. The effects of the pH and solvent used on the morphology of the self-assembled core-corona polymer composites were investigated. The nature of the interaction between the core and corona polymer particles was identified as hydrogen bonding with FT-IR spectroscopy.     

PREPARATION OF POLY（ETHYLENEGLYCOL-co-ACRYLIC ACID） MICROSPHERES WITH DIVINYLBENZNE AS CROSSLINKER BY DISTILLATION-PRECIPITATION POLYMERIZATION

Monodisperse poly（poly（ethyleneglycol） methyl ether acrylate-co-acrylic acid） （poly（PEGMA-co-AA）） microspheres were prepared by distillation-precipitation polymerization with divinylbenzene （DVB） as crosslinker with 2,2＇- azobisisobutyronitrile （AIBN） as initiator in neat acetonitrile without stirring. Under various reaction conditions, four distinct morphologies including the sol, microemulsion, microgels and microspheres were formed during the distillation of the solvent from the reaction system. A 2D morphological map was established as a function of crosslinker concentration and the polar monomer AA concentration, in comonomer feed in the transition between the morphology domains. The effect of the covalent crosslinker DVB on the morphology of the polymer network was investigated in detail at AA fraction of 40 vol%. The ratios of acid to ethylene oxide units presenting in the comonomers dramatically affected the polymer-polymer interaction and hence the morphology of the resultant polymer network. The covalent crosslinking by DVB and the hydrogen bonding crosslinking between two acid units as well as between the acid and ethylene oxide unit played key roles in the formation of monodisperse polymer microspheres.     

Enhancement of retentivity and selectivity for PAHs in NP-HPLC by high-density immobilization of poly(4-vinylpyridine) as an organic phase on silica.

Poly(4-vinylpyridine)-modified silica with high grafting density have been prepared by a grafting-from (g-from) approach through radical chain-transfer reactions. The widely used silane coupling agent 3-mercaptopropyltrimethoxysilane was used to prepare thiol-terminated silica. Chain-transfer reaction and polymerization of 4-vinylpyridine was carried out using alpha,alpha'-azobisisobutyronitrile as an initiator. Thiol-terminated silica and polymer-modified silica were both characterized qualitatively and quantitatively. The quantification of the organic phase has been done by thermogravimetric analysis and elemental analysis. Thus, the modified silica was used as a packing material and the retention behavior of polycyclic aromatic hydrocarbons (PAHs) was studied in normal-phase high-performance liquid chromatography. Results were compared with those of poly(4-vinylpyridine)-modified silica prepared by a grafting-to (g-to) approach. Commercially available aminopropyl-bonded silica and bare silica columns were also used as reference columns. The column of poly(4-vinylpyridine)-grafted silica prepared by the g-from method, having higher grafting density, provided the better retentivity and selectivity for PAHs compared to the other reference columns.     

Synthesis of monodisperse hollow polymer microspheres with functional groups by distillation precipitation polymerization

<正>Monodisperse hollow polymer microspheres having various functional groups on the shell-layer,such as carboxylic acid,pyridyl and amide,were prepared by two-stage distillation precipitation polymerization in neat acetonitrile in the absence of any stabilizer or additive,during which monodisperse poly(methacrylic acid)(PMAA) afforded from the first-stage polymerization was utilized as the seeds for the second-stage polymerization.The shell layer with different functional groups was formed during the second-stage copolymerization of either divinylbenzene(DVB) or ethyleneglycol dimethacrylate(EGDMA) as crosslinker and the functional comonomers,in which the hydrogen-bonding interaction between the carboxylic acid group of PMAA core and the functional groups of the corresponding comonomers,including carboxylic acid,amide and pyridyl,played an essential role for the formation of monodisperse core-shell functional microspheres.The hollow polymer microspheres were then developed after the subsequent removal of PMAA cores by dissolution in ethanol under basic condition.Transmission electron microscopy(TEM) and scanning electron microscopy (SEM) were used to determine the morphology of the resultant PMAA core,functional core-shell microspheres and the corresponding hollow polymer microspheres with different functional groups.FT-IR spectra confirmed the successful incorporation of the various functional groups on the shell layer of the hollow polymer microspheres.     

An approach for the surface functionalized gold nanoparticles with pH-responsive polymer by combination of RAFT and click chemistry

In this report, we demonstrated a novel efficient post-modification route for preparation of smart hybrid gold nanoparticles with poly(4-vinylpyridine) (P4VP) based on RAFT and click chemistry. A new azide terminated ligand was first synthesized to modify gold nanoparticles by ligand exchange reaction, and then click reaction was used to graft alkyne terminated P4VP which was prepared by RAFT onto the surface of gold nanoparticles. The functionalized hybrid gold nanoparticles were characterized by TEM, FTIR, and XPS etc. The results indicated that the P4VP was successfully grafted onto the surface of gold nanoparticles by click reaction. The surface grafting density was calculated to be about 6 chains/nm²_. In addition, the hybrid gold nanoparticles showed a pH responsive phenomenon as the pH value changed around 5.     

Long-term stabilization of mixed silver nanoparticles on an Al surface with poly(2-vinylpyridine) films

Surface-enhanced Raman scattering active substrates were prepared by the chemical assembly of Co, Ni and Ag nanoparticles on 3-aminopropyltriethoxysilane-functionalized Al surface. Poly(2-vinylpyridine) films were also deposited on the Al substrates by electrochemical polymerization in aqueous solution. Raman intensities were measured with respect to pyridine. Although silver has very desirable physical properties, good relative abundance, and low cost, gold nanoparticles have been widely favored because of their proved stability and ease of use. Unlike gold, silver is notorious for its susceptibility to oxidation (tarnishing), which has limited the development of important silver-based nanomaterials. However, the substrates with poly(2-vinylpyridine) films were exceptionally stable as they produced spectra that did not change even after much more than one year.     

Core-shell-corona au-micelle composites with a tunable smart hybrid shell

Micelles having a core of polystyrene and a mixed shell of poly(ethylene glycol) and poly(4-vinylpyridine) were formed through self-assembly of a triblock copolymer poly(ethylene glycol)- block-polystyrene- block-poly(4-vinylpyridine) in acidic water (pH 2). Reducing the HAuCl(4)-treated micelle solution leads to the formation of the Au-micelle composites with a core of polystyrene, a hybrid shell of poly(4-vinylpyridine)/Au/poly(ethylene glycol), and a corona of poly(ethylene glycol). The gold nanoparticles with controlled sizes were anchored to poly(4-vinylpyridine) to form the physically cross-linked hybrid shell. In aqueous solution, the hybrid shell is swollen and the swollen degree is sensitive to the pH condition. Under basic conditions, the channel in the hybrid shells of the composite is produced, which renders the composites a good catalytic activity. In addition, the composites also show good stability, unchanged hydrodynamic diameter, and surface plasmon absorption under different pH conditions.     

Synthesis of core-corona polymer hybrids with a raspberry-like structure by the heterocoagulated pyridinium reaction

A core-corona polymer hybrid with a raspberry-like structure was synthesized via the heterocoagulated pyridium reaction between the pyridyl group of poly(ethylene glycol dimethacrylate-co-methacrylic acid)@poly(ethylene glycol dimethacrylate-co- vinylpyridine) (poly(EGDMA-co-MAA)@poly(EGDMA-co-VPy)) core-shell small microspheres and the chloromethyl group of poly(divinylbenzene-co-chloromethyl styrene) (poly(DVB-co-CMSt)) microspheres, in which poly(EGDMA-co-MAA)@poly(EGDMA-co-VPy) acted as the corona and poly(DVB-co-CMSt) behaved as the core. The control coverage of the corona particles on the surfaces of core microspheres for the polymer hybrid was studied in detail through the adjustment of the mass ratio between the core and corona particles. The effects of the pH and solvents on the stability of the raspberry-like core-corona hybrids were investigated. The water static angle on the surface of polycarbonate (PC) film was studied using a contact angle system. The polymer particles and the resultant heterocoagulated raspberry-like hybrids were characterized with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The nature of the heterocoagulation between the core microspheres and corona particles was identified as the covalent pyridium reaction with Fourier transform infrared (FT-IR) spectroscopy.