4D Printing based piezoelectric composite for medical applications

Additive manufacturing (AM), otherwise known as three‐dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education, and medicine. Although a considerable amount of progress has been made in this field, additional research work is required to overcome various remaining challenges. Recently, one of the actively researched areas lies in the AM of smart materials and structures. Electroactive materials incorporated in 3D printing have given birth to 4D printing, where 3D printed structures can perform as actuating and/or sensing systems, making it possible to deliver electrical signals under external mechanical stimuli and vice versa. In this paper, we present a lightweight, low cost piezoelectric material based on the dispersion of inorganic ferroelectric submicron particles in a polymer matrix. We report on how the proposed material is compatible with the AM process. Finally, we discuss its potential applications for healthcare, especially in smart implants prostheses. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 109–115     

Challenge and Solution of Characterizing Glass Transition Temperature for Conjugated Polymers by Differential Scanning Calorimetry

Thermomechanical properties of polymers highly depend on their glass transition temperature (T _g). Differential scanning calorimetry (DSC) is commonly used to measure T _g of polymers. However, many conjugated polymers (CPs), especially donor–acceptor CPs (D–A CPs), do not show a clear glass transition when measured by conventional DSC using simple heat and cool scan. In this work, we discuss the origin of the difficulty for measuring T _g in such type of polymers. The changes in specific heat capacity (Δc _p) at T _g were accurately probed for a series of CPs by DSC. The results showed a significant decrease in Δc _p from flexible polymer (0.28 J g^?1 K^?1 for polystyrene) to rigid CPs (10^?3 J g^?1 K^?1 for a naphthalene diimide‐based D–A CP). When a conjugation breaker unit (flexible unit) is added to the D–A CPs, we observed restoration of the Δc _p at T _g by a factor of 10, confirming that backbone rigidity reduces the Δc _p. Additionally, an increase in the crystalline fraction of the CPs further reduces Δc _p. We conclude that the difficulties of determining T _g for CPs using DSC are mainly due to rigid backbone and semicrystalline nature. We also demonstrate that physical aging can be used on DSC to help locate and confirm the glass transition for D‐A CPs with weak transition signals. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1635–1644     

Band gap tuning of narrow‐polydispersity two‐dimensional conductive polymers with electroactive side‐chains

A series of two‐dimensional donor–acceptor–donor (D1–A(D2)) type of conducting polymers (CPs) all with electroactive bulky side chain structure has been designed, synthesized, and investigated by introducing the donor–acceptor (D1–A) thiophene–quinoxaline moiety in the main chain alongside and additional donor and hole transporting units in the side chain. All the UV‐vis spectra of the 2D polymers, PTPQT, PFPQT, and PCPQT, each with triphenylamine, fluorene, and carbazole units as the D2 side chain, possess strong intramolecular charge transfer absorption, thus resulting in better light harvesting. Their optical and electronic properties were thoroughly explored experimentally and computationally. The effect of molecular weight of the narrow polydispersity polymers on their optoelectronic property was studied in detail. In summary, the 2‐D CPs show potential for use as an active material in optoelectronic devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1217–1227     

Optical properties of chiral nematic side‐chain copolymers bearing cholesteryl and azobenzene building blocks

Thermotropic chiral nematic (N*) side‐chain copolymers (CPs) bearing cholesteryl and azobenzene units were synthesized to investigate the structure–property relationships of the acrylates of the chiral, achiral, and photochromic monomers of free radical polymerization‐derived polymers. The polar effect of chlorine substitution on the benzene ring of the chiral monomer (M3*) widened the mesophase transition temperature only at the monomer level, but no remarkable effect on the mesomorphic, optical or thermochromism of the corresponding CPs was observed. An examination of the CPs prepared using differential scanning calorimetry and hot‐stage polarizing microscopy showed that all the CPs exhibited a cholesteric nematic phase (N*), and increasing the content of the cholesteryl units in the CPs displayed only the N* phase over a much wider temperature range. On cooling from the isotropic melt of N* CPs, selective reflections of visible light that changed from short to long wavelengths were observed. The photolysis of CPs revealed that CP1 – CP4 undergo reversible photoisomerization and that CP5 and CP6 undergo irreversible photoisomerization. The rate of isomerization depends on the type (? N?N? , ? CH?CH? , and both) and content of photochromic units in the CPs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

GRGD‐decorated three‐dimensional nanoworm hydrogels for culturing human embryonic stem cells

Human embryonic stem cells (hESCs) offer great hope in the development of regenerative medicine. This article demonstrates a method to prepare temperature induced three‐dimensional (3D) hydrogels consisting of soft and flexible polymer nanoworms with a radius of 10 nm and lengths on the micrometer scale. We decorated the surface of the nanoworms with the integrin‐binding peptide (RGD) using our novel physical adsorption process, and show that the resulting gels are able to immobilize and maintain the survival of hESCs. We conclude that the unique PNIPAM nanoworm hydrogels allow binding of undifferentiated hESC through small integrin‐binding peptides. Their temperature sensitivity, biocompatibility, ability to present combinations of multiple ligands and moldability into any desired 3D shape should make this nanoworm system a versatile platform for organoid engineering and regenerative medicine in the future. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1956–1963     

Tailored thioxanthone‐based photoinitiators for two‐photon‐controllable polymerization and nanolithographic printing

Printing of high‐resolution three‐dimensional nanostructures utilizing two‐photon polymerization has gained significant attention recently. In particular, isopropyl thioxanthone (ITX) has been implemented as a photoinitiator due to its capability of initiating and depleting polymerization on demand, but new photoinitiating materials are still needed in order to reduce the power requirements for the high‐throughput creation of 3D structures. To address this point, a suite of new thioxanthone‐based photoinitiators were synthesized and characterized. Then two‐photon polymerization was performed using the most promising photoinitiating molecule. Importantly, one of the initiators, 2,7‐bis[(4‐(dimethylamino)phenyl ethynyl)‐9H‐thioxanthen‐9‐one] (BDAPT), showed a fivefold improvement in the writing threshold over the commonly used ITX molecule. To elucidate the fundamental mechanism, the excitation and inhibition behavior of the BDAPT molecule were evaluated using density functional theory (DFT) calculations, low‐temperature phosphorescence spectroscopy, ultra‐fast transient absorption spectroscopy, and the two‐photon Z‐scan spectroscopic technique. The improved polymerization threshold of this new photoinitiator presents a clear pathway for the modification of photoinitiators in 3D nanoprinting. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1462–1475     

Poly(terthiophene)s from copolymer precursors via solid‐state oxidative conversion

Herein, we report the synthesis of conducting poly (terthiophene)s using a side chain precursor polymer approach. Random copolymers were prepared by ring opening metathesis polymerization of two norbornylene monomers, one containing a pendant terthiophene group and the other containing a pendant acetate group. Solid‐state oxidative conversion of the terthiophene units was used to produce conductive polymers. Oxidative solid‐state conversion was successful for copolymers containing as little as 1 mol % of terthiophene comonomer. The electrical and optical properties of CPs were studied as a function of the amount of electroactive moiety, terthiophene (3T), present in the copolymer. The CPs were found to have conductivity varying between 10^?1 and 10^?4 S/cm depending on the precursor copolymer compositions. The CPs obtained from all precursors had no significant difference in their energy gaps and showed blue to orange color transitions when switching from the oxidized to the neutral states, respectively. The absorbance intensity at 426 nm for poly(3T) from the precursors fits the Beer–Lambert law corresponding to the range of initial 3T content in the precursor copolymer composition (from 1 to 100 mol %). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 756–763, 2010     

Preparation of few‐layer two‐dimensional polymers by self‐assembly of bola‐amphiphilic small molecules

Two bola‐amphiphilic small molecules, based on the diphenylanthracene skeleton structure, namely, BASM‐1 and its functionalized small molecule BASM‐2 , were designed and synthesized. The self‐assembly behavior and mechanism of these two molecules in aqueous solution were studied. The supramolecular two‐dimensional (2D) layer and the covalent 2D polymers were, respectively, prepared by these two molecules. What is more, the transverse size of the covalent 2D polymer laminates increased with the extension of the polymerization time. Atomic force microscopy results showed that both free‐standing single‐layer 2D polymers and few layer laminates with two to three molecular layers were obtained. So our work provides a simple and efficient method for directly preparing independent both supramolecular 2D polymers and covalent 2D polymers in liquid phase which is of great significance. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1748–1755     

Influencing the phase transition temperature of poly(methoxy diethylene glycol acrylate) by molar mass,end groups,and polymer architecture

The easily accessible, but virtually overlooked monomer methoxy diethylene glycol acrylate was polymerized by the RAFT method using monofunctional, difunctional, and trifunctional trithiocarbonates to afford thermoresponsive polymers exhibiting lower critical solution temperature‐type phase transitions in aqueous solution. The use of the appropriate RAFT agent allowed for the preparation and systematic variation of polymers with defined molar mass, end‐groups, and architecture, including amphiphilic diblock, symmetrical triblock, and triarm star‐block copolymers, containing polystyrene as permanently hydrophobic constituent. The cloud points (CPs) of the various polymers proved to be sensitive to all varied parameters, namely molar mass, nature, and number of the end‐groups, and the architecture, up to relatively high molar masses. Thus, CPs of the polymers can be adjusted within the physiological interesting range of 20–40 °C. Remarkably, CPs increased with the molar mass, even when hydrophilic end groups were attached to the polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Structural Transformation Pathways of Alkaline Earth Family Coordination Polymers Containing 3,3′,5,5′‐Biphenyl Tetracarboxylic Acid

The understanding of crystal stepwise transformation is very important to enclose the “black box” in the preparation of crystal materials. In this work, different structural intermediates were isolated prior to the formation of the final alkali earth coordination polymers (CPs) during the preparation of three pairs of alkali earth CPs through solvothermal method and convenient oil‐bath reactions. Single crystal X‐ray diffraction analysis demonstrated the structural transformation from a 0 D to 1 D inorganic connectivity for the Ca‐CPs and Sr‐CPs, but a 1 D to 0 D inorganic connectivity for Ba‐CPs, involving the breakage/formation of chemical bonds in the reaction solutions. Further analyses indicated that these two different structural transformation pathways are determined by the deprotonation of organic acid, competitive balance between the inorganic and organic connectivity, and the twist of the linker. FT‐IR spectra, thermogravimetric and luminescence behaviors agree with their structural characteristics.     

Dynamic postpolymerization of 3D‐printed photopolymer nanocomposites: Effect of cellulose nanocrystal and postcure temperature

Cellulose nanocrystal (CNC) reinforced methacrylate (MA) resin nanocomposite was prepared by 3D stereolithography printing. A postcure process, where the printed nanocomposite was heat‐treated under different temperatures, was applied to improve the property of the printed nanocomposites. To investigate the effect of CNC and postcure temperature on the kinetic behavior of the postpolymerization of printed nanocomposites, Fourier‐transform infrared spectroscopy and differential scanning calorimetry measurement of the printed nanocomposites before and after postcure were analyzed. The postpolymerization of MA nanocomposites was promoted at a postcure temperature of 140 °C for the printed 0.5% CNC/MA nanocomposites compared to the printed MA resin. The addition of CNC retarded the polymerization of MA resin during 3D printing, resulting in poorer mechanical properties of the printed nanocomposites compared to the printed MA resin. However, after postcure, the mechanical properties of the printed nanocomposites were improved by the postpolymerization of the MA nanocomposites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 935–946     

The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing

l ‐lactide monomers were grafted onto cellulose nanofibers (CNFs) via ring‐opening polymerization, forming poly(lactic acid) grafted cellulose nanofibers (PLA‐g‐CNFs). PLA‐g‐CNFs and pristine PLA were then blended in chloroform and dried to prepare a master batch. PLA‐g‐CNFs/PLA composite filaments targeted for 3D printing were produced by compounding the master batch in PLA matrix and melt extrusion. The as‐extruded composite filaments were subsequently thermal annealed in a conventional oven, and their morphological, thermal, and mechanical properties were evaluated. PLA was successfully grafted on the surface of CNFs as demonstrated by elemental analysis, and the concentration of grafted PLA was estimated to be 33 wt %. The grafted PLA were highly crystallized, contributing to the growth of crystalline regions of PLA matrix. The incorporation of PLA‐g‐CNFs improved storage modulus of the composite filaments in both low temperature glassy state and high temperature rubbery state. Postextrusion annealing treatment led to 28 and 63% increases for tensile modulus and strength of the filaments, respectively. Simulated Young's moduli from the Halpin‐Tsai and Krenchel models were found comparable with the experimental values. The formed composite filaments are suitable for use in 3D printing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 847–855     

Conjugated random terpolymers based on benzodithiophene,diketopyrrolopyrrole, and 8,10‐bis(thiophen‐2‐yl)‐2,5‐di(nonadecan‐3‐yl)bis[1,3]thiazolo[4,5‐f:5′,4′‐h]thieno[3,4‐b]quinoxaline for Efficient Polymer Solar Cell

A series of novel donor–acceptor (D–A) random conjugated terpolymers P2‐P4 along with the homopolymers P1 (BDT‐DPP) and P5 (BDT‐BTDQ) were designed and synthesized by copolymerizing a benzo[1,2‐b:4,5‐b]dithiophene (BDT) donor with an electron‐deficient diketopyrrolo[3,4‐c]pyrrole (DPP) unit and a benzothiadiazolo[3,4‐e]quinoxaline (BTDQ) moieties of different electron‐withdrawing strengths, and the resultant terpolymers showed broad absorption profile ranging from 300 to 1200 nm. The HOMO levels of the polymers were adjusted from ?5.23 to ?5.11 eV, and the optical bandgaps were controlled from 1.32 to 1.13 eV by changing the molar ratio of DPP and BTDQ acceptors. These terpolymers were used as a donor along with PC₇₁BM as an acceptor for the creation of polymer solar cells, and the performance was optimized via variable the donor to acceptor ratio and solvent vapor annealing. The polymer solar cells made from the random terpolymer P3 showed the highest overall power conversion efficiency of (9.27%), which is higher than that for the corresponding homo‐polymers counterparts, that is, P1 (7.27%) and P5 (7.68%). The results demonstrate that the designing of random D‐A1‐D‐A2 terpolymers may be the best approach for efficient polymer solar cells. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1478–1485     

In Situ tensile tests to analyze the mechanical response,crack initiation,and crack propagation in single polyamide 66 fibers

Single fiber mechanical testing is challenging to perform, especially when the diameter is as small as tens of micrometers. For this reason, real‐time observations of crack propagation mechanisms have been rarely been investigated experimentally. This article presents experimental and numerical investigations of fracture of monofilamentary high performance polyamide 66 fibers. Their engineering stress–strain curves are compared. The mechanisms of failure starting from crack initiation until the final brittle fracture are studied by in situ tests in Scanning Electron and optical microscopes. Finite element modeling at the individual fiber scale has been performed in three‐dimensional (3D), as a reverse engineering method. The compliance method was used to determine the crack depth that triggers the final failure. The fracture toughness was numerically determined using the J‐integral concept, accounting for the geometry of the crack front (3D) together with plastic deformation. 3D meshes were designed especially from postmortem observations. The average value deduced was about 47 ± 7 kJ m^?2, which will be discussed with other estimates using linear elastic fracture mechanics. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 680–690     

Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415     

Quantitative Image Analysis of Fractal‐Like Thin Films of Organic Semiconductors

Morphology modulation offers significant control over organic electronic device performance. However, morphology quantification has been rarely carried out via image analysis. In this work, we designed a MATLAB program to evaluate two key parameters describing morphology of small molecule semiconductor thin films: fractal dimension and film coverage. We then use this program in a case study of meniscus‐guided coating of 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene (C₈‐BTBT) under various conditions to analyze a diverse and complex morphology set. The evolution of morphology in terms of fractal dimension and film coverage was studied as a function of coating speed. We discovered that combined fractal dimension and film coverage can quantitatively capture the key characteristics of C₈‐BTBT thin film morphology; change of these two parameters further inform morphology transition. Furthermore, fractal dimension could potentially shed light on thin film growth mechanisms. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1622–1634     

Optimized peptide functionalization of thiol‐acrylate emulsion‐templated porous polymers leads to expansion of human pluripotent stem cells in 3D culture

Highly porous polymers produced by polymerization of the continuous phase of a high internal phase emulsion have been developed as scaffolds for 3D culture of human pluripotent stem cells. These emulsion‐templated polymerized high internal phase emulsion (polyHIPE) materials have an interconnected network of pores that provide support for the cells, while also allowing both cell ingress and nutrient diffusion. Thiol‐acrylate polyHIPE materials were prepared by photopolymerization, which, due to a competing acrylate homopolymerization process, leads to a material with residual surface thiols. These thiols were then used as a handle to allow postpolymerization functionalization with both maleimide and a maleimide‐derivatized cyclo‐RGDfK peptide, via Michael addition under benign conditions. Functionalization was evaluated using an Ellman's colorimetric assay, to monitor the residual thiol concentration, and X‐ray photoelectron spectroscopy. Maleimide was used as a model molecule to optimize conditions prior to peptide‐functionalization. The use of triethylamine as a catalyst and a mixed ethanol‐aqueous solvent system led to optimized reaction between surface‐bound thiols and maleimide. Peptide‐functionalized materials showed improved attachment and infiltration of human pluripotent stem cells over 7 days, demonstrating their promise as a scaffold for 3D stem cell culture and expansion. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1974–1981     

Visible‐Light‐Driven Photocatalysts of Two Copper(II) Coordination Polymers with Rare Sulfonate and Imidazole Co‐Ligand System

Two copper coordination polymers (CPs) [Cu(1,2‐BIYB)₂(AQ‐2,6‐DA)]_n · nH₂O ( 1 ) and [Cu(1,4‐BIYB)₂(AQ‐2,7‐DA)]_n · 3nH₂O ( 2 ) were obtained by reactions of pentahydrate copper sulfate with corresponding sulfonate and imidazole ligand under hydrothermal conditions, respectively [Na₂AQ‐2,7‐DA = anthraquinone‐2,7‐disulfonic acid disodium salt, Na₂AQ‐2,6‐DA = anthraquinone‐2,6‐disulfonic acid disodium salt, 1,4‐BIYB = 1,4‐bis(imidazol‐1‐ylmethyl)benzene, 1,2‐BIYB = 1,2‐bis(imidazol‐1‐ylmethyl)benzene]. CPs 1 and 2 show different structures: CP 1 has a 2D architecture, which is further extended into a 3D supramolecular structure through hydrogen bonding interactions, whereas CP 2 has a 1D architecture, which generates a 3D supramolecular structure via hydrogen bonding and strong π ··· π interaction. Notably, CPs 1 and 2 feature rare examples of CPs based visible‐light‐driven photocatalysts and reveal good stability toward photocatalysis.     

Fast annealing and patterning of polymer solar cells by means of vapor printing

The viability of vapor printing as a fast annealing treatment for the processing of polymer solar cells is demonstrated. In this method, a carrier gas transporting vapor solvent is delivered through a nozzle promoting self‐assembly of polymer chains. Devices based on poly(3‐hexylthiophene) blended with soluble fullerene are locally exposed during different annealing times to chlorobenzene vapor in a nitrogen flow. This enables finding an optimal nanostructure in promisingly short time‐scales (<5 s of exposure to vapor solvent), which yields a twofold increase in efficiency with respect to as‐cast samples. Moreover, a combined Raman, photometric, and ellipsometric characterization allows to understand why overexposure to vapor solvent reduces the performance. Finally, toluene and 1,2,3,4‐tetrahydronaphthalene are also tested using this method, showing different printing efficiencies corresponding to their specific vapor pressures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Aminothiazonaphthalic anhydride derivatives as photoinitiators for violet/blue LED‐Induced cationic and radical photopolymerizations and 3D‐Printing resins

The cations and radicals produced in aminothiazonaphthalic anhydride derivatives (ATNAs) combined with an iodonium salt, N‐vinylcarbazole, amine, or chloro triazine initiate the ring‐opening cationic polymerization of epoxides and the free radical polymerization of acrylates under LEDs at 405 or 455 nm. The photoinitiating ability of these novel photoinitiating systems is higher than that of the well‐known camphorquinone‐based systems. An example of the high reactivity of the new proposed photoinitiator is also provided in resins for 3D‐printing using a LED projector@405 nm. The chemical mechanisms are investigated by steady‐state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1189–1196