Au core-PtAu alloy shell nanowires for formic acid electrolysis

Inefficient electrocatalysts and high-power consumption are two thorny problems for electrochemical hydrogen(H2)production from acidic water electrolysis.Herein we report the one-pot precise synthesis of ultrafine Au core-Pt Au alloy shell nanowires(Au@PtxAu UFNWs).Among them,Au@Pt_0.077 Au UFNWs exhibit the best performance for formic acid oxidation reaction(FAOR)and hydrogen evolution reaction(HER),which only require applied potentials of 0.29 V and-22.6 m V to achieve a current density of 10 m A cm^-2,respectively.The corresponding formic acid electrolyzer realizes the electrochemical H2 production at a voltage of only 0.51 V with 10 m A cm^-2 current density.Density functional theory(DFT)calculations reveal that the Au-riched Pt Au alloy structure can facilitates the direct oxidation pathway of FAOR and consequently elevates the FAOR activity of Au@Pt_0.077 Au UFNWs.This work provides meaningful insights into the electrochemical H₂ production from both the construction of advanced bifunctional electrocatalysts and the replacement of OER.     

Layered Ag-graphene films synthesized by Gamma ray irradiation for stable lithium metal anodes in carbonate-based electrolytes

Lithium metal batteries are considered as high energy density battery systems with very promising prospects and have bee n widely studied.However,The uncon trollable plating/strippi ng behavior,infinite volume change and den drites formation of lithium metal anode restrict the applicati on.The unc on trolled n ucleati on of lithium caused by the non uniform multi-physical field distributions,can lead to the undesirable lithium deposition.Herein,a graphene composite uniformly loaded with Ag nano-particles(Ag NPs)is prepared through a facile Gamma ray irradiation method and assembled into self-supported film with layered structure(Ag-rGO film).Whe n such film is used as a lithium metal an ode host,the uncontrolled deposition is converted into a highly nucleation-induced process.On one hand,the Ag NPs distributed between the in terlayers of graphe ne can preferentially induce lithium nu cleati on and en able uniform deposition morphology of lithium between interlayers.On the other hand,the stable layered graphene structure can accommodate volume change,stabilize the interface between anode and electrolyte and inhibit dendrites formation.Therefore,the layered Ag-rGO film as anode host can reach a high Coulombic efficiency over 93.3% for 200 cycle(786 h)at a current density of 1 mA cm^-2 for 2 mAh cm^-2 in carbonate-based electrolyte.This work proposes a facile Gamma ray irradiation method to prepare metal/3D-skeleton structure as lithium anode host and demonstrates the potential to regulate the lithium metal deposition behaviors via manipulating the distribution of lithiophilic metal(e.g.Ag)in 3D frameworks.This may offer a practicable thinking for the subsequent design of the lithium metal anode.     

中国纤维素乙醇技术的研究进展

中国面临着严重的能源短缺和环境污染问题,中国政府正在局部几个省份内政策性鼓励燃料乙醇生产和使用.尽管当前主要是用玉米和谷物作为生产乙醇的原料,然而中国具有大量潜在的低成本的纤维素生物质原料,可以极大地扩大乙醇的产量,降低原料成本.近20年来,由于技术的革命性进步,已使得纤维素乙醇的生产成本从4美元/加仑以上,降低至约1.2-1.5美元/加仑.其中,每吨生物质约44美元.因此,目前乙醇掺汽油具有十分强的市场竞争力.已有几个公司正在建造首批商业纤维素乙醇工厂,虽然这些刚起步的小型设施在合理利用和管理上风险较小,但规模经济需要较大型工厂.尽管配送生物质原料的成本会随需求的增加而增加,但在乙醇生产基础上的生物精炼技术的发展,尤其是化工产品和动力的协同生产,将会使全过程的经济可行性大大提高.进一步深入的基础研究,将解决低成本下实现纤维素的完全利用,以确保在无政策性补贴的前提下,真正使纤维素乙醇成为具有市场竞争力的低成本纯液体燃料.     

Binary ligand strategy toward interweaved encapsulation-nanotubes structured electrocatalyst for proton exchange membrane fuel cell

Hierarchically porous architecture of ir on-nitroge n-carb on(Fe-N-C)for oxyge n reducti on reaction(ORR)is highly desired towards efficient mass transfer in the fuel cell device manner.Herein,we reported a binary ligand strategy to prepare zeolitic imidazolate frameworks(ZIFs)-derived precursors,wherein the addition of secondary ligand endows precursors with the capabilities to transform into porously interweaved encapsulation-nanotubes structured composites after calcination.The optimal catalyst,i.e.,termed as Fe₆-M/C-3,exhibits excellent durability with 88.8%current retention after 50,000 seconds in 0.1 M HClO₄solution by virtue of nanoparticles-encapsulation features,which is more positive than the benchmark commercial 20 wt%Pt/C catalyst.Moreover,a promising maximum power density of Fe₆-M/C-3 as cathode catalyst was also dem on strated in proton exchange membrane fuel cells(PEMFCs)measurements.Therefore,this binary ligand approach to the fabrication of hierarchically porous structures would also have significant implications for various other electrochemical reactions.     

Molten salt as ultrastrong polar solvent enables the most straightforward pyrolysis towards highly efficient and stable single-atom electrocatalyst

Currently,pyrolysis as the most widely used method still has some key issues not well resolved for synthesis of carbon-supported single-atom catalysts(C-SACs),e.g.,the sintering of metal atoms at high temperature as well as the high cost and complicated preparations of precursors.In this report,molten salts are demonstrated to be marvellous medium for preparation of C-SACs by pyrolysis of small molecular precursors(ionic liquid).The ultrastrong polarity on one hand establishes robust interaction with precursor and enables better carbonization,resulting in largely enhanced yield.On the other hand,the aggregation of metal atoms is effectively refrained while no nanoparticle or cluster is formed.By this strategy,a C-SAC with atomically dispersed Fe-N₄ sites and a high specific area over 2000 m² g^-1 is obtained,which illustrates high ORR activity in both acid and alkaline media.Moreover,this SAC exhibits superior methanol tolerance and stability after acid soaking at 85℃ for 48 h.It is believed that the molten-salts-assisted pyrolysis can be developed into a routine strategy as it not only can largely simply the synthesis of C-SACs,but also can be extended to prepare other types of SACs.     

镧对Mg-Si合金中Mg2Si相变质的影响

研究了Mg-5Si合金中La的添加对初生Mg2Si相变质的影响。结果表明,适量的La能够有效地变质初生Mg2Si相。基于本文的研究,在添加约0.5%La时,获得了最佳的变质效果,此时,初生Mg2Si相的尺寸减小到25μm以下,其形态从粗大的树枝形状变为多面体形状。然而,当La增加到0.8%或者更高时,初生Mg2Si相又生长为粗大的树枝形态。而且,在凝固过程中发现形成了一些LaSi2化合物,这些化合物的数量随着La的增加而呈现逐渐增加的趋势。     

电感耦合等离子体质谱法测定天然水体中19种元素

建立STD/KED模式-电感耦合等离子体质谱（ICP-MS）法同时测定天然水体中铍、硼、钛、钒、铬、锰、钴、镍、铜、锌、钼、镉、锑、钡、铊、铅、铁、砷和硒19种元素的分析方法。仪器调谐校准后,样品在线加入锂、钪、铑、铋校准溶液校正,以标准曲线内标法定量分析。标准曲线相关系数均大于0.999,样品加标回收率为92.6%～103.6%,质控样品测定值相对标准偏差为0.20%～2.6%(n=6),方法检出限为0.01～0.70μg/L。该方法灵敏度高,操作简便,节省人力,能满足天然水体中19种元素的同时检测需要。     

电解质-非电解质混合溶液活度系数的关联及溶解的推算 II:NH3-NaCl-Na2SO4-H2O体系的液固平衡热力学

由于在研究的体系中, Na2SO4是非对称电解质, 且能生成水合盐, 故推导了由非对称型电解质与非电解质所构成的混合溶液的各组分的活度系数关联通式, 并在此基础上讨论了水合盐液固平衡的计算方法.     

黄花棘豆化学成分的研究II:两种三萜皂苷的结构

从黄花棘豆的总皂苷中分离出两个新皂苷1和2.经光谱分析及化学方法确证,1为3-O-[α-L-鼠李吡喃糖基(1→2)-β-D-葡萄吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B;2为3-O-[α-L-鼠李吡喃糖基(1→2)-α-L-阿拉伯吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B.     

二氧化钛纳米管的研究进展

二氧化钛纳米管由于其新奇的光电、催化、气敏等性能引起了广泛的关注,在太阳能电池、光催化、环境净化、气体传感器等领域有潜在的应用价值.本文概述了近年来在制备方法、反应机理和组成、晶型和形貌及掺杂和应用方面的进展,并讨论了今后可能的研究发展方向.     

聚全氟乙丙烯自由表面的形态结构

用电子显微镜观察了聚全氟乙丙烯试料的自由表面形态结构,指出试料不同,自由表面形态也不同,有的由无规片层组成,有的则由无规和规整两种片层组成,提出了两种片层结构本质的设想,用另一些实验数据支持这种设想,根据设想所推测的试料的力学性能与实测值基本相符。     

Intramolecular dynamics: time evolution of superposition states in the regular and irregular spectrum

The time evolution of wavefunctions ψ(t) is compared in two systems, one with a regular energy spectrum and one with an irregular spectrum. The behavior of P(t) = {|[ψ(O)|ψ(y]}|² is found to be the same in both systems, P(t) decay is insensitive to the coupling between the degrees of freedom.     

Theory of the cooperative transition between two ordered conformations of poly(L-proline). II. Molecular theory in the absence of solvent.

Phenomenological theories of the transition between helical form I (cis peptide bond) and helical form II (trans peptide bond) of poly(-L-proline), which is a typical order in equilibrium order transition, have been presented by Schwarz (using the parameters s, sigma, beta', and beta' in a 2 X 2 matrix formulation) and by the present authors (using the parameters s, sigma betaC, and betaN in a 4 X 4 matrix formulation). A molecular theory of the same transition has been formulated to account for the phenomenological parameters. The statistical weights of regular helical sequences with and without junctions between the two forms were computed from empirical potential energy functions. Two puckering conformations of the pyrrolidine ring, i.e., with the Cgamma atom down and up, were allowed, and the free energy was computed for chains with four types of puckering, viz., regular down, regular up, random A, and random B, in the latter two of which the up and down puckerings were randomly distributed. The random A and random B chains have higher energy than those with regular down or up puckering, in both forms I and II. From both an energetical and a free energetical point of view, form I is more stable than form II under vacuum at room temperature. The dependence of the relative stabilities of form I and form II under vacuum on chain length was examined from both an energy and free energy point of view. The four parameters, s, sigma, beta', and beta', which describe the transitions in Schwarz's theory, were calculated from the statistical weights of various types of sequences. It was found that the thermally induced transition between form I and II under vacuum occurs with the pyrrolidine rings remaining in the down conformation. The calculated values of s suggest that form I is more stable than form II in the regular down chain, while form II is more stable than form I in the regular up chain under vacuum at room temperature. The calculated values of sigma for regular down and regular up pyrrolidine ring puckering are in good agreement with experimental observations, whereas those for random A and random B puckering are much smaller than the experimental values. A theory for the effect of solvent on the parameters s, sigma, beta', and beta' (at constant temperature) is developed, and the computations involving solvent effects are described in the next paper.     

Calculating Electrochemical Activity of Porous Electrodes of a Filled-up Type with an Immobilized Enzyme and Regular Gas Pores

A model for a porous electrode of a filled-up type with an immobilized enzyme, in which a system of regular gas pores is formed, is studied. The system of regular gas pores is in fact a collection of equidistant cylinders whose thicknesses are equal to one grain of the hydrophobizing agent. Usually, the gas reactant passes into a porous electrode via a number of chains that comprise porous grains of the hydrophobizing agent. The latter is distributed in the electrode bulk in a random fashion. In this case, channels for supplying gas are formed at high concentrations of the hydrophobizing agent. As a result, the number of molecules of a catalyst in a porous electrode, and along with it the current, are not great. Should we pass to electrodes with regular gas pores, the required amount of a hydrophobizing agent would decrease. As a result, the number of molecules of the enzyme in the electrode and the current would increase. The calculation of the last quantity is the subject matter to which the paper pays a major attention. The calculation is performed for two versions of distribution of a hydrophobizing agent over the electrode bulk, specifically, a random distribution and a regular distribution. Concrete calculations are carried out for an oxygen porous electrode with an enzyme whose electrochemical characteristics are close to those obtained on laccase. It was assumed in the calculations that the enzyme operates without mediators. It is established that a porous electrode with a quasi-regular structure has a considerable advantage. With an electrode thickness of 13 m one can manage to obtain currents of nearly 0.74 A cm^–2 as early as at an overvoltage of about 30 mV.     

Effects of surface roughness on the electronic structure of metallic clusters

We study the electronic level density in spherical clusters. Due to the granularity of the ionic background the surface is irregular at the microscopical level. We show that this affects the shell structure and that the level statistics display from the bottom to the top of the spectrum a transition from a poissonian behaviour to one consistent with the predictions of random matrices theory.     

Optical surface properties and morphology of MgO and CaO nanocrystals

Optical absorption and photoluminescence emission properties of dehydroxylated MgO and CaO nanocrystals are discussed with respect to particle morphology and size. On MgO nanocubes with pronounced corner and edge features two emission bands at 3.4 and 3.3 eV result from the excitation of 4-coordinated surface O(4C)(2-) anions in edges at 5.4 eV and of regular oxygen-terminated corners at 4.6 eV, respectively. Morphologically ill-defined CaO particles are a factor of 5 larger, do not display regular corner features, and show only one photoluminescence emission band at 3.0 eV. The associated excitation spectrum indicates electronic excitations above the energy required to excite regular oxygen-terminated CaO corners. It is concluded that in the case of morphologically well-defined MgO nanocubes variations in the next coordination of oxygen-terminated corners can effectively be probed by photoluminescence spectroscopy and thus allows for discrimination between 3-coordinated surface O(2-) in regular corner sites and kinks.     

Simulation of phase separation in melts of regular and random multiblock copolymers

The dissipative particle dynamics method and parallel computing are employed for computer simulation of phase separation in melts of regular and random (Markovian) AB multiblock copolymers of symmetric compositions. For the first time, it is shown that, as the Flory-Huggins parameter χ is increased, lamellar microstructures are formed in all these systems. At preset block length M, the microstructures arise in regular copolymers at lower χ values than those in random copolymers, while the formed lamellas are narrower and have smaller amounts of defects. At χM > 100, a superstrong segregation regime develops in the regular copolymers. In random copolymer melts, bicontinuous structures are observed for a long time; in the long run, they are likewise transformed into lamellar structures whose imperfection substantially increases with M.     

Dynamics of end-linked star-polymer structures

In this work we focus on the dynamics of macromolecular networks formed by end-linking identical polymer stars. The resulting macromolecular network can then be viewed as consisting of spacers which connect branching points (the cores of the stars). We succeed in analyzing exactly, in the framework of the generalized Gaussian model, the eigenvalue spectrum of such networks. As applications we focus on several topologies, such as regular networks and dendrimers; furthermore, we compare the results to those found for regular hyperbranched structures. In so doing, we also consider situations in which the beads of the cores differ from the beads of the spacers. The analytical procedure which we use involves an exact real-space renormalization, which allows to relate the star network to a (much simpler) network, in which each star is reduced to its core. It turns out that the eigenvalue spectrum of the star-polymer structure consists of two parts: one follows in terms of polynomial equations from the relaxation spectrum of the corresponding renormalized structure, while the second part involves the motion of the spacer chains themselves. Finally, we show exemplarily the situation for copolymeric dendrimers, calculate their spectra, and from them their storage and the loss moduli.     

From random sphere packings to regular pillar arrays: effect of the macroscopic confinement on hydrodynamic dispersion

Flow and mass transport in bulk and confined chromatographic supports comprising random packings of solid, spherical particles and hexagonal arrays of solid cylinders (regular pillar arrays) are studied over a wide flow velocity range by a numerical analysis scheme, which includes packing generation by a modified Jodrey-Tory algorithm, three-dimensional flow field calculations by the lattice-Boltzmann method, and modeling of advective-diffusive mass transport by a random-walk particle-tracking technique. We demonstrate the impact of the confinement and its cross-sectional geometry (circular, quadratic, semicircular) on transient and asymptotic transverse and longitudinal dispersion in random sphere packings, and also address the influence of protocol-dependent packing disorder and the particle-aspect ratio. Plate height curves are analyzed with the Giddings equation to quantify the transcolumn contribution to eddy dispersion. Confined packings are compared with confined arrays under the condition of identical bed porosity, conduit cross-sectional area, and laterally fully equilibrated geometrical wall and corner effects on dispersion. Fluid dispersion in a regular pillar array is stronger affected by the macroscopic confinement and does not resemble eddy dispersion in random sphere packings, because the regular microstructure cannot function as a mechanical mixer like the random morphology. Giddings' coupling theory fails to preserve the nature of transverse dispersion behind the arrays' plate height curves, which approach a linear velocity-dependence as transverse dispersion becomes velocity-independent. Upon confinement this pseudo-diffusive behavior can outweigh the performance advantage of the regular over the random morphology.     

High-resolution nuclear magnetic resonance studies at 270 MHZ of alternating and random poly(benzyl D,L-glutamates).

The solution conformations of several D,L copoly benzyl glutamates both random and alternating are studied by comparing their NMR spectra in chloroform and also in dioxane and dimethylformamide. The alpha CH chemical shifts characteristic of the alpha helix of strictly alternating DL copolymers in chloroform/0.5% TFA are established (3.65 and 3.82 ppm) and differ from that of the regular alpha helix (3.92 ppm). It is concluded that alternating copolymers prepared by an essentially racemization-free method are completely in the alpha-helical conformation which is characteristic of strictly alternating D-L copolymers, whereas random copolymers are largely regular alpha. The alpha leads to piDL helix/helix transition of an alternating copolymer in dioxane has been monitored and the alpha CH resonance characteristic of the piDL helix is found to be at the unusually low chemical shift of 4.45 ppm.